Quicktime 7.1.1 update disabled sound in browsers

Anyone else notice this problem? It might be coincidence but I no longer have audio for any plugin in Safari and Firefox since recently updating my QuickTime to 7.1.1. I've tried reinstalling QT 7.1.1 as well as my Flash plugin with no luck. Beyond that I've repaired permissions and restarted while holding the apple+s key to start in single user mode then ran fsck as instructed (/sbin/fsck -fy ). After that I still have no audio in my browsers.
This problem is only occuring on a fairly new iMac 2.1Ghz G5 w/1GB ram running 10.4.6

Gerry,
In addition to the GarageBand suggestion, since you are using a G5 iMac, No sound from some applications, but system alert sounds play (Mac OS X 10.3, 10.4) may give some background on why this may be happening.
;~)

Similar Messages

Itunes 7.0 or Quicktime 7.1.3 update disabled airport connection??

I just ran the automatic update which installed Itunes 7.0 and Quicktime 7.1.3
Afterward my airport connection could not get an ip address. (It had the self assigned 169.254.x.x address) The airport was not actually disabled, It was still connected, but could not access the internet via the airport. Ethernet was unaffected. We have another computer which had not been updated and it still connected via airport no problem.
Then, after about an hour of searching the discussions for an answer, just as I was writing this, the problem resolved itself.
Very strange.

I try and download QuickTime stand alone, but it only is a package with Itunes,
it is available as a standalone. there are two different versions of the installer on the download page. take a closer look at the area of the page immediately below the "Download the Free Player" heading (to the left of the page):
Quicktime 7.1.3 Installers … get the one that doesn’t mention itunes

Hlep !,Quicktime Image keep on skipping but sound is perfect, help

image in videos (quicktime 7) keeps on skipping, but sound is ok. what can i do to fix it ?

I'm spending lots of time and lots of money trying to research this problem. I've read tons of posts and nobody seems to adequately answer the problem. lots of theories but no "this is it." I will keep you updated if I can. I had a "mac pro" come to the house today. Tomorrow they are giving me 4MB of RAM and say that shoudl increase it. The theory is that this version of iMac was before HD cameras were big and now that everyone seems to be using them, the computer is not equipped to handle it so it's slow to process it. They think the RAM will make it better but he said probably still not somethign I'll be thrilled with. Truthfully, as long as it works and the files are stored (for safe keeping) properly and I can burn discs for peopel to see I'm okay with it. Seems like everything else...we've just got to keep up with technology. If anyone has any insights to add, please do. I promise to let you all know what I find as I go through this process.

Disable sound and/or vibration while in Messages app?!

Hi!
I would like to know is there some option in the iOS where I could disable sounds and vibration while I'm using Messages app (app is open and the display is turned ON and I can see the message I recieved). This is very annoying when I'm using iMessages and getting a message every few seconds and then my phone vibrates constantly. It is of course OK if I'm not in Messages app but when I'm already using it I don't need a notification I got a message when I can see it for myself.

I'm having the exact same problem. I get a random text message ding for no discernible reason at least oncer per day. No alerts from apps, no email, no texts, no missed calls, no voicemails. It's not changing connection types between wifi, 3G, and edge. I know that the first gen iPhones sometimes dinged in that situation. If anyone knows what's causing this I would love to hear it.
Just to be clear I'm using a perfectly normal, not jailbroken, iPhone 4 running the latest software version.
Regards,
John G.

Here is a solution to the Quicktime 7.1.5 Update conflicts - it works!

Any program that is having a problem since the Quicktime 7.1.5 Update should benefit from reverting back to QT version 7.1.3 . My TurboTax works again, because I downgraded to QT 7.1.3 .
You can't manually remove all of the files necessary to uninstall QT 7.1.5. Don't even try.
Don't uninstall and re-install your programs. It is a waste of time, and will not fix the problem.
You can choose to re-install the operating system, and it should work. It is not necessary, though, and is a hassle.
This is how you can easily downgrade QuickTime 7.1.5 to version 7.1.3:
1. Download Quicktime 7.1.3 installer:
http://www.apple.com/support/downloads/quicktime713formac.html
2. Mount the installer package (Double click QuickTimeInstallerX.dmg so that it opens and shows the open box icon labeled QuickTime713.pkg). This is very important.
3. Download and install Pacifist from this location:
http://www.charlessoft.com/
4. Open Pacifist (You can do so without going through the registration process. You can do that later if you decide to pay.)
5. Drag the QuickTime713.pkg icon to the Pacifist dialog box. When you release it, another window opens with a list of files. The top file is labeled "Contents of QuickTime713.pkg."
(Please note that if you mistakenly select the unmounted .dmg file into Pacifist instead of the .pkg, there will be an installation but without an effect. )
6. Click to highlight "Contents of QuickTime713.pkg."
7. Go to the "File" Menu in the Menu Bar and choose "Install Files to Default Locations" from the pulldown menu.
A dialog box will open asking if you want to install entire contents. THIS IS EXACTLY WHAT YOU WANT TO DO.
8. Be sure to check the box that says "Use Administrator Privileges" if it is not already checked.
9. Click "Install" and carefully read any further instructions as they pop up. You will respond with the equivalent of YES every time, even if asked to replace every file for QuickTime. Take your time, and don't assume that you know what the instructions say without reading them.
10. When the install process is finished, restart the computer. You are through with Pacifist, so don't open it again (unles you decide to Register and pay).
11. Once again, open QuickTimeInstallerX.dmg. Double click QuickTime713.pkg to do a normal installation one more time. After the install is done, restart your Mac one last time. That's it.
By the way - NEVER keep your tax return data file in the same folder as the TurboTax application. You might accidentally delete it when uninstalling TurboTax. Put it in a folder with your other tax prep documents.
It took me approximately one hour from the time I started downloading QT 7.1.3 and Pacifist until I was completely finished and using TurboTax again. I have a 400 Mz PowerPC Sawtooth G4, so your time may be better. Good luck!
Oh, and don't forget to pay for Pacifist. They deserve it!

For those having problems with 10.4.x, try this link and see if any of their fixes address your problems. Apparently, there are several issues with
10.4.x that are unrelated to the fix for the 10.3.9 users that I posted.
Apple Mac OS X Intel - 10.4.9
http://www.macfixit.com/search.php?productID=29147
Apple Mac OS X PPC - 10.4.9
http://www.macfixit.com/search.php?productID=8848

All of sudden, I can't launch iTunes as I get a popup saying "iTunes requires Quicktime 7.5.5 or later". I only have 7.4 currently and the apple site doesn't show anywhere to download Quicktime upgrade. Software Update detects no reqd updates. Help pls??

all of sudden, I can't launch iTunes as I get a popup saying "iTunes requires Quicktime 7.5.5 or later". I only have 7.4 currently and the apple site doesn't show anywhere to download Quicktime upgrade. Software Update detects no reqd updates. Help pls??

Here's a link to the QuickTime for Leopard 7.7 installer:
http://support.apple.com/kb/DL761

HT5770 Cannot install QuickTime 7.x security update and why does the file say 'unknown publisher'?

I downloaded QuickTime 7.x security update (recommended by my VP), but I cannot run. I am getting the message 'Unknown Publisher', but when I click run, nothing happens?

Hello,
Seems someone from Apple corrected the problem.
I just downloaded a new version, again, due to upgrade to a larger HDD, and the new installer does have Apple name identified.
So try it again.
Good luck.

Since the newest hp update, my sound has gone completely silent. any ideas?

I have an HP Pavilion g6 and I just updated with an unknown update (it doesn't show in my "View History") so I'm not entirely sure which one it was, but since then I've lost my sound completely. I'm about to update my sound driver, but in the mean time, does anyone have any ideas?

Hi, Megan:
Try a hard reset of the notebook first. Info on how to do that is at the link below.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01684768&prodT...
Paul

Disable sound in abap workbench?

Hi,
Is it posibble to disable sound in abap workbench when activating of generating an program?
tnx, Adibo.

Hi,
After logging into SAP R/3 system, Click 'Customizing of local layout (Alt + F12) button in standard tool bar.
click 'New visual design' , select Off for audio and click OK.
Now logout and login to the system again. You will not get any sounds.
Regards
Sailaja.

Mac OSX 10.9.5 Creative Cloud updates disabled system wide. How to re-enable.

I have a Creative Cloud build with system wide updates disabled on Mac OSX 10.9.5. Which file needs to be edited to re-enable the auto updates? What is the value that needs to be edited? Thanks

Ljetjwem I am sorry but I don't understand you request. What specific error messages are you receiving? If updates are disabled then please contact your I.T. department or the individuals managing the computer.

How can i install shockwave with auto updates disabled?

how can i install shockwave with auto updates disabled?
i need to push out shockwave to all our machines and i need to have autoupdates disabled? whats the trick?

I ran with native io enabled and now i need to see how things happen with native io disabled.I am trying to understand the various aspects of the server.
Can you help me? How to set the default queue and application specific queues , and oofcourse socket readers in the case native performance packs are not used?
Please, I will be very grateful.

What version of Quicktime Player X is updated to if updating to 10.7.5?

Does anyone know what version of Quicktime Player X is updated to when you update the OS to 10.7.5? Currently, I am running Quicktime Player 10.1, but wasn't sure if it would stay at 10.1 or get updated to 10.2.
Also, has it been verified that Quicktime 10.2 will work on Lion?
Thanks!

1. QuickTime Player 10.1.
2. It won't.
(73893)

How can i disable Sound BB Z10 if dial a phone number.

how can i disable Sound BB Z10 if dial a phone number without to deactivate all sound. i want to deactivate only the sound when i dial a number?
s

swn007 wrote:
how can i disable Sound BB Z10 if dial a phone number without to deactivate all sound. i want to deactivate only the sound when i dial a number?
s
Hi @swn007! Welcome to the BlackBerry Support Community Forums!
You can't, you need to turn the phone in Silent/Vibrate Mode.
Cheers!
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

Disable sound for specific users

How do I disable sound for specific users?

Theoretically if the user's not in the audio group, he shouldn't have access to sound devices.
$ ll /dev/snd/
total 0
drwxr-xr-x 2 root root 80 Oct 2 19:30 by-path
crw-rw----+ 1 root audio 116, 2 Oct 2 19:30 controlC0
crw-rw----+ 1 root audio 116, 8 Oct 2 19:30 controlC1
crw-rw----+ 1 root audio 116, 7 Oct 2 19:30 hwC0D0
crw-rw----+ 1 root audio 116, 13 Oct 2 19:30 hwC1D0
crw-rw----+ 1 root audio 116, 14 Oct 2 19:30 hwC1D1
crw-rw----+ 1 root audio 116, 15 Oct 2 19:30 hwC1D2
crw-rw----+ 1 root audio 116, 16 Oct 2 19:30 hwC1D3
crw-rw----+ 1 root audio 116, 4 Oct 4 09:12 pcmC0D0c
crw-rw----+ 1 root audio 116, 3 Oct 4 10:13 pcmC0D0p
crw-rw----+ 1 root audio 116, 5 Oct 2 19:30 pcmC0D1p
crw-rw----+ 1 root audio 116, 6 Oct 2 19:30 pcmC0D2c
crw-rw----+ 1 root audio 116, 9 Oct 2 19:30 pcmC1D3p
crw-rw----+ 1 root audio 116, 10 Oct 2 19:30 pcmC1D7p
crw-rw----+ 1 root audio 116, 11 Oct 2 19:30 pcmC1D8p
crw-rw----+ 1 root audio 116, 12 Oct 2 19:30 pcmC1D9p
crw-rw----+ 1 root audio 116, 1 Oct 2 19:30 seq
crw-rw----+ 1 root audio 116, 33 Oct 2 19:30 timer

Possible disable sound from internal speaekrs?

Hi Guys,
I have a strange request I need to disable sound from the internal speakers. I wanted to ask if this was possible?
Thanks
Berry

I've tried that by muting the output in system preferences. But it can be unmuted via the keyboard. I need to be able ti disable the internal speaekrs indefinitely. Is there a hack or a preference that I can get rid of?
There's also no alternative output device.
Thanks for the reply though.
Berry

Quicktime 7.1.1 update disabled sound in browsers

Similar Messages

Maybe you are looking for