QuickTime 7.1.5 and 7.1.6: web player problems

I never had problems with quicktime webplayer in the past, but with QuickTime 7.1.5 and QuickTime 7.1.6 it crashes (I tried with Firefox, Explorer and even Safari 3 beta) with most videos (especially the ones on Apple website, for esample the video demo on Safari page).
I tried removing completely QuickTime and iTunes, and removing temp and application dirs, and then reinstalling the problem, but the problem remains.
I'm using Windows XP Professional SP2, italian version

I tested it under Windows Vista x64, and it works perfectly, using QuickTime 7.1.6 and iTunes 7.2.
The web player works with Internet Explorer 7 and Safari 3 (I didn't test Firefox, yet), and the streaming inside the standard player works, too (I tried latest Steve Jobs keynote).
PC   Windows Vista   4 GB RAM, 500 GB HD, GeForce 8800 GTS 640 Mb

Similar Messages

  • Adobe Acrobat 6 and Adobe Reader 9 Web browser problem

    Good Day,
    I have a user that has Acrobat 6 and Reader 9 installed on the same computer. Acrobat 6 is used to edit (via open with -> Adobe Acrobat) while for normal reading, they use Adobe Reader 9 (since some files that were created in Acrobat 9 cannot be opened with Acrobat 6).
    From the desktop, everything works as it should. However, the problem is that when the user is trying to open a document on the web (from Internet Explorer 7) then instead of using Reader 9, it uses Acrobat 6 (and because is unable to open Acrobat 9 files) it gives an error saying that you need to have Adobe Reader 8 or 9 installed.
    So far I have tried the following:
    1) Reparing Reader 9
    2) Uninstalling Acrobat 6 running a repair on Reader 9 (which fixes the problem, until I reinstall Acrobat 6 again. I make sure I do not put a check mark on Read files on Internet Explorer)
    3) Went to Preferences on Acrobat 6 and unchecked Display PDF in browser.
    4) Checked on Manage Add-ins and tried disable any combination of Adobe PDF addin to make it work only with 9.
    Note: Reader version is the latest 9.4.1
    Any thoughts?
    Thanks
    Max

    Ok, so after I wrote the last post, I read through the related posts, and found the answer to
    what i was looking for.
    I guess it is unofficial, but I tested it today and works great:
    Registry that needs to be changed is:
    HKEY_CLASSES_ROOT\Software\Adobe\Acrobat\Exe
    Change the path (Acrobat 6) from "c:\Program Files\Adobe\Acrobat6\Acrobat.exe"
    to the path of Reader 9 which would be something like "c:\Program Files\Adobe\Reader 9.0\Reader\AcroRd32.exe"
    That fixed the problem.
    Thanks
    Max

  • Multiple List Builder and Query As A Web Service Problems

    Hi All,
    I quickly became aware that trying to pass multiple parameters to "Query As A Web Service" from a "List Builder" object in Xcelsius was not a simple task to acheive after reading this post here :-
    Query as a Web Service and In List
    I followed the advice that David Brunner suggested towards the end of the thread about creating a "BI Service" by publishing a block from a Webi Rich Client report.
    I then referenced the newly created "BI Service" by using it's WDSL URL through the Xcelsius Data Manager - Query As A Web Service connection.
    Everything appeared to work fine (e.g. Did my selections from the last builder and got refreshed/changed figures in my Spreadsheet Table object in the Dashboard) until I realised figures in my dashboard were not reconcilling and appeared much lower than expected.
    After monitoring what was happening traffic wise with "Fiddler 2" I discovered that Xcelsius was only passing the first entry in each of the selected values for the list builder even though a range of cells (e.g Month_Year!$a$2:$a$13) was specified to be passed as an input parameter to the BI Service (confirmed through viewing the Input/Output XML being sent).
    I even tried specifying the multiple values in the different suggested ways that David Brunner advised such as a semi colon delimited list (e.g. Miami;Boston;Chicago) but this didn't appear to be working either.
    Can anyone suggest what I may be doing wrong here? Why is only the first value being passed?
    I am using Xcelsius Enterprise 2008 SP3.
    Many Thanks,
    Gary
    Edited by: Gary Scott on Dec 1, 2010 3:49 PM

    Hi Gary,
    I have the same problem. Have you found any solution?
    Thanks.
    EZ

  • QuickTime Alternates in Quicktime 7.0.3 and Tiger 10.4.2

    I have a co-worker that has been testing our QuickTime Streaming videos and he is running Mac OS 10.4.2 and QuickTime 7.0.3. On our QuickTime alternates created with Cleaner 6 he keeps getting an error message that QuickTime 5 needs to be installed. If I put in the direct rtsp URL to the movie without alternates he can view it fine.
    Anyone else having the same problem?
    Anyone know what might be causing this problem and if there are maybe issues with QuickTime 7.0.3 and Tiger that could be causing problems?

    Cleaner hasn't been updated in at least a couple of years (all indications are that it's a dead product; the last version was a beta, never finalized) and does not recognize QuickTime 7 as a valid version. So he probably needs to use something else to handle the compression, though perhaps just avoid using a version preference setting in Cleaner might work (doubt it, though).

  • AWP and "Mark Of The Web"

    I'm trying to add the "mark of the web" to the pages that run
    the web player and it causes the web player not to run for me. All
    I get is an outline box where the player should be. If I take that
    code out, it works as normal. Any ideas?

    > I'm trying to add the "mark of the web" to the pages
    that run the web
    > player
    > and it causes the web player not to run for me. All I
    get is an outline
    > box
    > where the player should be. If I take that code out, it
    works as normal.
    > Any
    > ideas?
    >
    I never found that useful for Authorware content.
    What problem are you trying to fix by using this?
    Steve
    EuroTAAC eLearning 2007
    http://www.eurotaac.com
    Adobe Community Expert: Authorware, Flash Mobile and Devices
    My blog -
    http://stevehoward.blogspot.com/
    Authorware tips -
    http://www.tomorrows-key.com

  • Quicktime causes buffer overrun and does not work

    I just tried to update to Quicktime 7 (7.0.4). It installs fine.
    When I visit the movie trailers page on Apple.com
    I try to play a clip and I get an error message that says buffer overun (trying to play keynote address in wuicktime application)
    or an error message that says plugin performed an illegal operation and then it crashes my firefox browser.
    It seems there are a lot of bugs with quicktime 7, I have tried standalone downloads of 7.0.3 and 7.0.2, they don't work either.
    I have tried installing in safe mode and the installler will not work. what next?
    do I actually have to reinstall windows to get it to work or do i have to go through the hassle of manually attempting to clear all of the clutter off of the hard drive and tinker with registry settings and try again?
    Is there an explanation from APPLE to rectify these problems or will I just have to give up using your product?
    Is there going to be a fix or is apple not supporting quicktime for windows anymore?
    Too bad version 6 was messed with. It worked perfectly.

    I'm having the exact same problem, since the upgrade this week.
    iTunes does an immediate shutdown when it’s clicked. No errors are reported.
    I automatically thought of Quicktime and when I clicked on it, I get a immediate shutdown as-well, but in Quicktime’s case I get an error window that states “Buffer Overflow error”.
    I’ve tried to uninstall Quicktime from the Add/Remove programs in the Control panel. It flashes, does not report any errors and appears to be removing the program (Quicktime). But, when all is finished Quicktime remains in the Add/Remove programs list and it has not been removed.
    Just to see what would happen, I installed Quicktime all by itself, and then tried to removed it VIA Control Panel. Same experiences (Quicktime remains in the Add/Remove programs list and it has not been removed).
    I’ve removed iTunes a couple of times and tried to re-install (using defaults). Same problem exists (i.e. ‘Buffer Overflow error’).
    I reinstall DirectX. Same problem exists (i.e. ‘Buffer Overflow error’).
    Can Quicktime be removed manually? (i.e. delete files\directories, and Registry edits)?
    Or is this just a nightmare to perform?
    Does anyone have any other thoughts I can try?
    AMD 3300+   Windows XP   512mb memory, CD writer, SATA and IDE HD's, On board Mobo video (S3).

  • When i try to update itunes and quicktime, it stops me and says " The feature you are trying to use is on a network resource that is unavailable" please help.

    when i try to update itunes and quicktime, it stops me and says " The feature you are trying to use is on a network resource that is unavailable" please help.

    Before trying the update again, use Microsoft's Fix it solution at http://support.microsoft.com/mats/Program_Install_and_Uninstall. Use it to uninstall iTunes and Quicktime. It bypasses this not uncommon problem. When the solution finishes, the selected program will be uninstalled. It can take several minutes and I have seen as much as half an hour.
    After iTunes & Quicktime are uninstalled, try the update again.

  • Help. Deleted Quicktime using the Trash and I need to get it back!

    Hi,
    Quicktime was not playing .avi files so I though I'd delete it and reinstall it to clear up the problem. So I dragged Quicktime into the trash and emptied it. When I tried to reinstall it I got a message saying that Quicktime cannot be installed on this disk because Quicktime X is already present. I need to get Quicktime back, can anybody help me please?

    Extract the QuickTime X player from your Mac OS X 10.6 DVD and then run the combo updater for your Mac OS X version.
    If you want QuickTime 7, it's here.
    If you can't play a given AVI, install Perian. If you still can't play it, it probably can't be played in Mac OS X.
    (57456)

  • I have Quicktime pro 7.69 and I can't get it to Launch. I am using leopard 10.5.8 can anyone help me please

    I am Using  Mac leopard 10.5.8 and just loaded quicktime pro 7.69 and just can't get it to launch. Can anyone help me with this please
    tommy

    I am Using  Mac leopard 10.5.8 and just loaded quicktime pro 7.69 and just can't get it to launch.
    There is nothing new or separate to launch. When the QT 7.6.9 Player is keyed with your registration name and number, the player itself becomes the QT v7.6.9 "Pro" player with additional features "unlocked" for your use. For instance, if you have a QT compatible file loaded in your player and can now open the "Properties" window, then you have "Pro" feature access. In a similar manner, "File"  menu transcoding and "Edit" menu features are now accessible.

  • I need to download Quicktime 7.0.3 and iTunes 6, where are they?

    I am having big problems with Quicktime 7.1.3 and I just want to go back to using 7.0.3 with iTunes 6. Can anybody tell me where to download these from on the Apple website, or anywhere else for that matter, I can't see them.
    Annoyingly I can't find the installation disc that came with my ipod either.

    http://www.apple.com/downloads/macosx/apple/
    I believe it has the Quicktime 7.0.1 reinstaller link and the 7.1.2 update there.

  • My quicktime is very jerky with 1080p video but when I play the video file in FCPX its smooth. I recently upgraded to OS mavericks on iMac with 16gb of ram and should not be having this problem. Is it possible to reinstall older software?

    My quicktime is very jerky with 1080p video but when I play the video file in FCPX its smooth. I recently upgraded to OS mavericks on 2011 iMac with 16gb of ram and should not be having this problem. Is it possible to reinstall older software? I cant figure whats causing the jerky video so I'm assuming its the new OS. Any one have any suggestions?

    I have the same but not the same problem. When I play a sound or a video on a website (other than youtube)on safari,  a weird nois is comeing from the speakers, the sound has pops/clicks but if I play the same video/sound on mozilla it works fine.. If wnyone know what's the problem.. please let us know

  • I can't download Quicktime Pro?  HELP!!  I have Quicktime viewer 7.5 and ju

    I can't download Quicktime Pro? HELP!! I have Quicktime viewer 7.5 and just bought the download for Quicktime Pro upgrade.
    But the "Control Panel" window they tell me to look for can't be found. All I can do is open my Quicktime Player 7.5 window, and it doesn't offer the tabs in the instructions.

    http://www.apple.com/quicktime/download/
    Regards
    Paul

  • I have a page with multiple quicktime players on it, and want to close all other players when any of the players is started.

    I have a page with multiple quicktime players on it, and want to close all other players when any of the players is started.
    <div id="mp3-player" style="display:none;height:15px !important;float:left;margin:0px 0 15px 0px; width:270px !important;">
                           <div style="height:15px !important;width:270px !important;">
                               <embed src='http://209.15.205.3/~cityval2/MP3/352681.mp3' width="270px" height="15px" AUTOPLAY=false CONTROLLER=true LOOP=false PLUGINSPAGE="http://www.apple.com/quicktime/" />
                            </div>
                        </div>

    One key point.
    1. Migration within  the same forest ; we can say operation is cut & paste (Source account wil be not present)
    2. Migration between the forest ; we can say operation is copy  & paste ( Source account will be present)
    Also find some ADMT cool stuffs.
    ADMT Series – 1. Preparing Active Directory
    ADMT Series – 2. Preparing the ADMT Machine
    ADMT Series – 3. SID History
    ADMT Series – 4. Password Export Server
    ADMT Series – 5. Machine Preparation
    ADMT Series – 6. Service Account Migration Wizard
    ADMT Series – 7. Group Account Migration Wizard
    ADMT Series – 8. User Account Migration Wizard
    ADMT Series – 9. Merging Users with a Different sAMAccountName
    ADMT Series – 10. Security Translation Wizard – Local Profiles
    ADMT Series – 11. Computer Migration Wizard
    Regards,
    Biswajit
    MCTS, MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, Enterprise Admin, ITIL F 2011
    Blog:
      Script Gallary:
    LinkedIn:
    Note: Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights..

  • How to correctly render quicktime with two pop and timecode?

    I have a feature finished and need to create the quicktime for the composer and mixer. But I have to add a new time code generator as well. So, at the moment, I have a timeline starting at 58:50 and the feature starting at 01:00:00. It is selected as non-drop.
    I was told by my online editor that I would have to either Nest the sequence and then generate my quicktime or I would have to create a quicktime from this sequence and then drop the quicktime on a new timeline and then create a quicktime again. I may be wrong, but it seems that both of those would be uneccesary as shouldn't I be able to just make the edited sequence into the new quicktime with an added timecode (via the generator)? Also because if I have my original timeline at 58:50 and then nest it on a new time line would the new timeline start at 01:00:00 and then generate a mixed up timecode?
    So, with all that in mind. I am just wondering what my steps from here are in:
    1) How to add the two pop (I was told to go into the effects bin and find the Bars And Tone and extract two frames at 59:58:00 and 59:5801 and I gues drop those two frames into the timeline.)
    2) Add the timecode generator ( i know it is available somewhere in FCP)
    3) And how to then correctly render a quicktime for the post gang.
    After that, I drop the drive and project off to the online guys and they will do the OMF and create the master HD project.
    Thanks in advance.

    Hi Andy,
    Thanks for the reply but am not sure what you mean by removing in and out points and dragging from browser to a new sequence. How does one technically remove an in and out point? And is this a strategy that will somehow enable me to be able to nest the project?
    I remember once a long time ago I tried to nest a large project (probably 70 minutes) and I tried highlighting the whole thing (which I may be doing the long way as I have to SHIFT click clip one and then SHIFT click the last clip and then try and find every clip in between that didn't get highlighted - which can take some time) and it would still not nest the project (kept coming up with some warning). So, I ultimately had to nest it by copying and pasting the film in 5ths onto their own sequences and then nesting them and then nesting the nests!
    So, I am hoping to do a quicktime for my post guys will not be as long winded....
    Thanks.

  • Relation between QuickTime 7.1.1 and AirPort problems

    I've read a few thread talking of relations between
    the last QuickTime 7.1.1 update and problems with AirPort
    in one way or the opposite.
    As this looked quite hard to explain I thoroughly checked
    the QuickTime 7.1.1 update package and I can tell everyone for
    sure:
    it doesn't include a bit that could interfere with the
    AirPort driver or software
    You could double check it for yourself with the following
    steps:<pre>
    1. within "Software Update...", select "QuickTime 7.1.1"
    and select "Update > Download Only"
    2. in a Terminal or xterm window, type the following
    commands:
    my_mac$ cd /Library/Packages/QuickTime711.pkg/Contents
    my_mac$ gzcat Archive.pax.gz | pax | egrep -i 'air|802'
    my_mac$ cd Resources
    my_mac$ egrep -i 'air|802' cleanup-list InstallationCheck
    my_mac$</pre>
    Then, if your AirPort was "apparently" broken or repaired
    just after the QuickTime 7.1.1 update, this was simply
    due to the restart of your system.
    dan    

    If you've got quicktime pro working with 7.1.3, count yourself lucky considering all the reports about 7.1.5 problems. I was about to download QT Pro when I started reading the reviews. Most of them were bad. Is it working for you with 7.1.3, especially on creating media files? Do you use it with Final Cut Pro? I'd appreciate your feedback.

Maybe you are looking for