Quicktime 7.1 and OS X 10.3.9

I would like to register my displeasure over the Quicktime 7.1 update. This is basically a security update and, like Quicktime 7.04, it broke a number of Java applications. However Quicktime 7.04 was released five months ago. Why were these issues not fixed ? In particular, I am unable to reinstall Maple 10, which uses InstallAnywhere. This issue was fixed promptly on OS X 10.4.
I feel that you are purposely breaking the platform in order to get people to upgrade. I do not buy products that stop working for no valid reason. Please fix this issue, so that I can get on with my work.
iBook G4 1GHz / 768MB.   Mac OS X (10.3.9)  

Roman Pearce,
The Discussion Forums are not "read" by Apple per se and the best place to voice your feelings about a problem with the OS that you are encountering is perhaps best left through the Apple's Mac OS X Feedback page.
I know you must be frustrated by the problems you are encountering but the above link is the best place to post this feedback.
hope that helps some,
littleshoulders [:-)
PS. There may be someone here that could help you troubleshoot the issue, if possible, and will post in with some suggestions to help. I'm sorry I did not myself have the problem you describe as I do not use the application you mention so was not effected by the same problem with the update/s.

Similar Messages

  • HDC-SD9, iMovie 7.1.2, QuickTime 7.5, and Final Cut Pro

    After I read the post, I tested it on my Mac. I can safely say that I can import videos from HDC-SD9 using iMovie and Final Cut Pro now.
    Update to QuickTime 7.5 and iMovie 7.1.2 to make this camera work with the Mac.
    It seems to be working with Final Cut Pro too.
    source:
    http://37prime.com/news/?p=160

    That sounds promising! I will install the update tonight and let you know if the same goes for me!

  • After recent QuickTime updates fcp and QuickTime will not open .mov files captured on my FS-H200. Iran

    After recent QuickTime updates fcp and QuickTime will not open .mov files captured on my FS-H200. I put this onthe quick time thread and they sent me here.

    and NEVER do a software update unless you've got a clone of your startup drive so you can restore your system to it's working state if something goes wrong.
    https://discussions.apple.com/docs/DOC-2494

  • No itunes or quicktime will install and run

    I dloaded itunes on home pc before I even had ipod video for this Cmas. It works fine. Needed to get it on my laptop so I dloaded and it kept giving me the error message it encountered an error and needed to close (send error report or not). Tonite I scoped the site and found quicktime was key to the program so I found it on my laptop but it too wouldn't work (kept saying upon clicking to open that this was for installed programs, check to see that quicktime was properly installed). So I dloaded just quicktime and at the install pkg was told I had a "newer version" already installed. How can that be? This laptop is 9 mos old and surely the dload from apple is the "newest" version. So I tried to unintall quicktime and kept getting error msg that qtplugin.ocx could not be deleted. I tried uninstall from quicktime and windows add/remove pgms, then finally deleted all files in the quicktime folder except the one in the error msg, which still cannot be deleted. Tried dloading quicktime and itunes together and keep getting the window to either repair or uninstall. I chose repair 2x and was told all was fixed, but still can't open quicktime or itunes.
    I need to get this fixed asap. I already dloaded itunes 2 wks ago and it never worked, so I uninstalled and reinstalled. Same error msg every time.
    Have read the troubleshooting section which asks me to get into control panel and select the quicktime but I don't have any quicktime icon in control panel (neither before I deleted it nor now).
    Help!
    Sheila

    If you have internet explorer 7 that is your problem. If you really want itunes to work you need to uninstall IE7 from your control panel when you do this IE6 will automatically take over. Then you need to uninstall quicktime (all components) and itunes. Then reinstall quicktime and itunes. This is what I did and our iTunes is working great again. If you don't have IE7 then I have no idea.
    Good luck

  • Quicktime 7.5 and Final Cut Pro is there a problem?

    Quicktime 7.5 and Final Cut Pro is there a problem with this version of Quicktime?
    i cant capture at all now! I can control my camera but no capture or footage in the window?
    I can capture using IMovie fine!

    Alister, there's no problem with it on my Mac, nor none that I know of ... I think you must have an install specific issue.
    Check your camera setting matches your currently chosen Easy Setup ... in fact, close the Log and Capture window, then go ahead and re-choose the appropriate Easy Setup for your camera and I/O hardware, then choose View menu > Refresh A/V Devices, and then reopen Log and Capture ...
    ... still no go? if not then post pack with complete details of your hardware and software, your camera, the recording format, any I/O equipment that is in the mix etc.

  • QuickTime Streaming Server and Referenced Movies

    Does QTSS adjust it's stream depending on the client device and bandwith like HTTP referenced movies do? Are referenced movies strickly for HTTP delivery or can QTSS make good use of "hinted" reference media?
    I can create and stream hinted HD movies with no problem on QTSS. I can also create referenced movies via QuickTime or Compressor and even know how to add the "hinting" perameter to the Compressor workflow for referenced movies. I have the option to use QTSS or the Web Server to stream my HD content but would like to know what is the best option for backward compatibility, browser support, etc.
    Thanks, Yo Bro!

    Yo .. I am appauled at the lack of support for such posts .. and the limited answers for those looking for streaming support.
    I am trying to learn too .. currently running EvoLV to provide my solutions .. but it is not enough.
    Trying to assemble those of us interested with links.'
    Have you found any usefull answers?
    C

  • I am using QuickTime 7 Pro and want to loop my video.  The Loop function is grayed out.  Why?  How can I loop my video?

    I am using Quicktime 7 Pro on a Max Mini to play my video on a gallery monitor.  Under View, the Loop option is grayed.  Why?  I need to play the video in a continuous loop all day.  Thank you.

    Loop appears to be "broken" in QuickTime Player Pro and 10.7.4.
    It's been fixed in 10.8 and also works in QuickTime 10, 10.1 and 10.2.
    Use 10.1 on your machine if you need to loop your playback.

  • My Mac HD says that I have Quicktime Software, all that I find in my applications is Quicktime Player. And I cannot unlock Quicktime Pro in this program through its preferences.. help?

    My Mac HD says that I have Quicktime Software, all that I find in my applications is Quicktime Player. And I cannot unlock Quicktime Pro in this program through its preferences.. help?

    http://support.apple.com/kb/DL923?viewlocale=en_US&locale=en_US
    Install and register this version. It installs in the Utilities folder.

  • Quicktime encounters problem and must close. Sorry for inconvenience.

    I have downloaded Quicktime now 3 times and each time downloaded it again after first removing it from the control panel. Up to a few months ago I never had a problem and used it for many years as such. I think the problems started when the combination iTunes/Quicktime came on the market but I might be wrong. I have downloaded the combination, then Quicktime separately and iTunes separately but to no avail.
    I am an amateur in the field of problem soving so ask for your help. I have the icon sitting on the desktop but when I click on it I get immediately the message:
    "Quicktime encounters problem and must close. Sorry for inconvenience." What I don't think I had before is the fact that during installing I say the Icon appearing on my desktop and immediately my computer goes black and start
    a reboot. So I suppose my problem can be anything.
    I most likely messed something up.
    Your assistance is greatly appreciated.

    What I don't think I had before is the fact that during installing I say the Icon appearing on my desktop and immediately my computer goes black and start
    a reboot.
    That's a bit disconcerting. Are you getting a flash of a blue screen as well?
    We can make "hidden" blue screens stick around a little longer by using the following technique:
    1) Open your system control panel (Start->Control Panels->System).
    2) Select the "Advanced" tab.
    3) Click the "Startup and Recover" section's "Settings" button
    4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.
    Make those settings changes, and try another install.
    If you do get a blue screen this time, what numerical and text codes are you getting with it? (ie 0x[zeros/letters/numbers] CAPSANDUNDERSCORES)
    if the blue screen mentions a specific file, let us know what that is called too. (exact spelling, please.)
    here's a reference on the sorts of things i'm asking about:
    Troubleshooting Windows Stop Messages

  • How to avoid Quicktime error 50 and 0?

    How can I avoid Quicktime error 50 and 0?  Are there know problems in FCPX that will generate errors in QT?

    You can probably minimize you odds of getting corrupted clips by optimizing where possible.
    Russ

  • Quicktime 7.2 (and up) slow playout from network drive

    Does anybody has a problem with all versions of Quicktime 7.2 (and up) where Quicktime Player doesn't play or open files very slowly from network drives? 7.1.6 works fine. This happens on all my machines.

    Hey Germac,
    For me these invisible files were not stored on the desktop as the files i was working with were on an external drive but i guess if the file you are converting is located there or if the desktop happens to be where the resulting file is saved, it's likely these invisible .QT temp files will be created on the desktop.
    I've sent info of this to apples quicktime feedback so hopefully they'll look into it.
    Here are some apps that will allow you to view invisible files without using the terminal, i've been using the InvibliX app as it seemed to be the most recent and/or up to date but there are plenty to choose from.
    http://www.macupdate.com/search.php?arch=intel&keywords=invisible&os=macosx

  • OS 10.4.10 on G4 using quicktime 7.2 and Avid

    HHeellpp!!!
    My system just upgraded to 10.4.10 and Quicktime 7.2, and I'm running Avid Xpress Pro on my system. I have the upgrade for Avid; however, Quicktime 7.2 is not supported, (didn't know) and I need to roll back to 7.1.6. Can anyone help me successfully accomplish this w/o media loss?
    Mucho appreciate!

    ...Note that an archive and install should not affect either your project files or your OMFI MediaFiles directories, so you can do that without losing any media.
    If you are running Avid, you MUST treat your computer as an appliance. DO NOT upgrade ANYTHING until you know for certain that the upgrade is compatible with your Avid version! If you need the upgrade features, get yourself another drive and install the later OS version on that. On my desktop machine, I'm still running X.3.9 and QuickTime 6.5 because that's what works with my Avid. It's a PITA to have to reboot with another drive just to use QT-7 or to burn a dual-layer DVD, but at least my Avid works!
    --Dave Althoff, Jr.

  • When I import a video recorded in Quicktime, the audio and video don't sync. Any solution?

    When I import a video recorded in Quicktime, the audio and video don't sync. Any solution?

    Where did the media file come from?
    Does it use a variable frame rate?
    What version of Premiere are you using?
    Variable frame rate video problems:
    http://forums.adobe.com/message/4897424#4897424
    http://forums.adobe.com/message/4071506#4071506

  • I am attempting to open MPEG4 files on my Mac Book Pro and it is saying that the file cannot be opened because a codec is missing.  I downloaded both QuickTime Player 7.6.6 and also QuickTime Player MPEG2 and neither one of them are helping with my prob

    I am attempting to open MPEG4 files on my Mac Book Pro and it is saying that the file cannot be opened because a codec is missing.  I downloaded both QuickTime Player 7.6.6 and also QuickTime Player MPEG2 and neither one of them are helping with my problem.

    riiimommy wrote:
    I am not familiar with VLC, where can I download it? 
    VLC

  • I downloaded quicktime 7 to my pc and I purchased the quicktime pro upgrade and have a registration key.  How do I upgrade it

    I downloaded quicktime 7 to my pc and I purchased the quicktime pro upgrade and have a registration key. Now how do I upgrade it.

    Go into the preferences and there will be a tab for registration
    http://www.apple.com/quicktime/pro/unlock-mac_osx.html

  • Premiere Elements 13 has stopped importing MOV. files. Quicktime is installed and working

    Premiere Elements 13 has stopped importing MOV. files. Quicktime is installed and working.

    Nowconfused
    I tried to get background information on the video from your camera but all I could find so far is that the camera is probably recording
    1080p (1920 x 1080 @ 29.97 or 30 progressive frames per second. What are you (manually) or the program (automatically) setting as the project
    preset to match the properties of your video source. See Edit Menu/Project Settings/General and the readings for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio even if the fields look grayed out.
    How are you importing the files into the Premiere Elements 13 project - with the Add Media/Files and Folders/Project Assets from a computer
    hard drive location or are you making a USB connection between the camera and computer/Premiere Elements 13 and using Add Media/Video ..../Video Importer? Could you possibly have changed the way you are importing the files into a project?
    Would it be possible for you to send a small sample of one of these .mov files that will no longer import? Maybe in a Dropbox link that you include in a reply?
    Do you have any of the older files still available - the ones that did import at one time? If so, will they still import into a project or do they now not import?
    More later.
    Thanks for the follow ups.
    ATR

Maybe you are looking for