Quicktime 7.1 buffer overrun when trying to get info from an Indeo 4.4 AVI

Surprisingly Quicktime7.1 can play one of my Indeo video 4.4-encoded Windows .AVI File. It plays and exports flawlessly but when I want to use Get Info the player (or maybe one of the QuickTime DLLs) crashed with a VC++ Runtime Error: Buffer Overrun. All other QuickTime file don't have this problem.

This is what when the situation happens.
Message was edited by: yksoft1

Similar Messages

Getting error NSURLErrorDomain error -1100 when trying to get updates from the App Store. Are updates still available for OS below Maverick?

Started getting this error today (01/14/2014) when trying to download updates from the App Store for my MBAir 11" mid 2013. Error: NSURLErrorDomain error -1100
Are updates still available for OS below Maverick?

That error may result from connecting to a cellular network via a phone or mobile broadband device. If that's what you're doing, try another network.

Buffer Overrun when trying to view downloaded Videos

I've recently downloaded a video from iTunes. When trying to play via iTunes, it crashes after a moment, giving no error but a windows error of "iTunes has encountered a problem and needs to close"
I have tried opening this file through QuickTime and I get this error:
"A buffer overrun has been detected which has corrupted eternal state. The program cannot safely continue exacution and must now be terminated"
I have:
1. Uninstalled/Reinstalled both iTunes/Quicktime
2. Updated Motherboard chipset drivers
3. Cleaned out all references to both Quicktime and iTunes
4. Cleaned out all Registry entries involving quicktime.
Since all these were "fixes" to this question before, I thought maybe there was one I was missing.
Any help please? Thanks

Seriously, the itunes support is for the birds....go over on the QuickTime support discussions and repeat that post, is my advice.

ITunes locks up and closes when trying to "Get Info" to edit Podcasts

Also having problems with ver 9. iTunes downloads and stores podcasts by the same author separately instead of placing them under the section for that series podcasts by the author. Then when I try to edit them so they will all be listed in one podcast heading it shuts down when I go to the "Get info" to edit. I guess this is actually two problems in one!
Thanks for any suggestions!

What version of Mac OS X is on your MacBook?

'general error' when trying to get clip from browser to viewer

I'm trying to put together a short instructional video (a kind of 'quick intro' on what a particular website is all about).
Some clips in the video consist of screen captures (made with iShowU) while others are 'live' from a firewire camcorder.
There's no problem with the camcorder clips. All going according to plan there.
However, *when I try to get the screen grab clips from the browser to the viewer (to mark in/out points, etc), I get a 'general error' message followed in quick succession by an 'out of memory' message*. (I have 8GB ram so I'm sure memory's not the issue.)
I can drag the screen grab clips from the browser directly to a sequence in the timeline, but not to the viewer.
Neither quitting FCP nor logging out (and back in again) fixes the problem. (BTW, I'm working with a PAL setup on the camera and am capturing in PAL dimensions in iShowU, if this has any relevance here.)
I'm tearing my hair out... Maybe it's something very simple that I'm doing wrong? *Any ideas on how I might get the screen grab clips from the browser to the viewer?*
TIA.
Hugh

Sounds like iShowU may be writing a less-than-valid QuickTime file.
If you can successfully drag one of these items into the timeline, I'd drag it in and then File->Export->QuickTime Movie... checking the Make Movie Self-Contained box. If this works and you have a lot of clips you might try dragging them all into a timeline and then saving them as one big movie. Sounds like they're not that long so such an approach shouldn't get you into FCP performance problems.
Another approach would be to open each movie in QuickTime and do a Save As... with the "Save as self-contained movie" option.
Either way these will probably write a MOV file that FCP will be happy with.
Good Luck!
-Joe

SharePoint Designer 2010 Error occurs when accessing Edit Form: "The server returned a non-specific error when trying to get data from the data source ..." This occurs when using "" in a calculated column in a SharePoint List

I created a calculated column "Expiration Date" in SharePoint 2010 with formula, =IF([Contingent Hire]=TRUE,(Created+90),(IF([Contingent Hire]=FALSE," ")))
This works in the SharePoint list but when I go to edit the Edit Form in Designer. I get the error specified in the title of this post. I'm trying to make it so the Expiration Date is blank when another column, "Contingent Hire" (a YES/No
column) is FALSE.
The Edit Form is essentially a DataViewWebpart. If I remove the " ", like so, "(IF([Contingent Hire]=FALSE,))" from the calc column, the error goes away; however, the Expiration Date field does not
remain blank like I want it to.
Does anyone have any suggestions? (Below is the error generated when I open Designer and then try to open the Edit form for the corresponding list containing the calc column)
JackSki123

Hi Jack,
Could you provide a screenshot about this issue?
As Dimitri suggested, you can install the update for your SharePoint Designer and check again.
And you can also check if you can display "NA" instead of " " in your calculated column per the following post.
http://rajeshspillai.blogspot.in/2012/03/server-returned-non-specific-error-when.html
Thanks
Daniel Yang
TechNet Community Support

Crashing when trying to upload info from device

Here is the report:
Date/Time: 2010-02-03 13:59:34.010 -0700
OS Version: 10.4.11 (Build 8S2167)
Report Version: 4
Command: Safari
Path: /Applications/Safari.app/Contents/MacOS/Safari
Parent: WindowServer [58]
Version: 4.0.4 (4531.21.10)
Build Version: 1
Project Name: WebBrowser
Source Version: 45312110
PID: 340
Thread: Unknown
Link (dyld) error:
Symbol not found: _usleep$UNIX2003
Referenced from: /Library/Java/Extensions/libbmserialapex25.jnilib
Expected in: /usr/lib/libSystem.B.dylib
Model: MacBook2,1, BootROM MB21.00A5.B07, 2 processors, Intel Core 2 Duo, 2 GHz, 1 GB
Graphics: Intel GMA 950, GMA 950, Built-In, spdisplaysintegratedvram
Memory Module: BANK 0/DIMM0, 512 MB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 512 MB, DDR2 SDRAM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), 1.4.4
Bluetooth: Version 1.9.5f4, 2 service, 0 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MHW2080BHPL, 74.53 GB
Parallel ATA Device: MATSHITACD-RW CW-8221
USB Device: Built-in iSight, Micron, Up to 480 Mb/sec, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA
USB Device: BodyMedia(R) Armband Mini USB, BodyMedia, Up to 12 Mb/sec, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., Up to 12 Mb/sec, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., Up to 12 Mb/sec, 500 mA
This is happening when I am trying to upload my bodybugg info to the apex website. It crashes everytime. Any advice is greatly appreciated!

Hi,
*"USB Device: BodyMedia(R) Armband Mini USB, BodyMedia, Up to 12 Mb/sec, 500 mA"*
Apparently it's not compatible with either Safari or Tiger 10.4.11. Check the BodyMedia site for support.
There's an e-mail address here you can use. Ask if they support the Macintosh OS X Tiger v10.4.11 and Safari 4.0.4
http://my.apexfitness.com/vip/contact.php
Carolyn
Message was edited by: Carolyn Samit

"Unknown error" when trying to get updates from App store...

Anyone else having trouble with the App store today? Trying to take in updates but get a "cannot be completed due to unknown error" huh? I've double/triple checked passwords etc, and they're free updates so I don't get it. Deleted apps and tried to re download, but no go..... Thoughts?
Thank you!

Hi there. I had the same issue just now. Tried twice and fortunately the apps started to update as per normal. Unfortunately, i'm not able to view my "featured" page. Hv raised the same question just now.

When trying to update apps from iPad and iPhone a previous one time users email keeps coming up. How do I delete their information?

When trying to update apps from iPad and iPhone a previous one time users email keeps coming up. How do I delete their information?

delete off any apps that are asking for the wrong apple id and download/sync them over from the correct one

Get error message when trying to launch bridge from CC 64 bit.

Get error message when trying to launch Bridge from Photoshop CC 64 bit. "Cannot complete command because extension cannot be loaded." Need fix. Thanks.

Hi Adobe Bubba,
Please uninstall the software, run the cleaner tool, restart your machine and install again.
Cleaner tool: http://www.adobe.com/support/contact/cscleanertool.html .
Regards,
Romt Sinha

Mail unexpectedly quits when trying to get mail

Please help me, the person at the genius bar was useless. My mail unexpectedly quits only when trying to get mail. I have repaired permissions, and I did an archive reinstall (at the recommendation of the genius). Nothing I seem to do works, even when I removed the envelop index and started mail after getting re setup it just crashed again.

Hi CurtRK, and a warm welcome to the forums!
You mention the envelope, but how about the Cache, and doing it like this...
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move the following folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.

2nd gen A TV I can hear but not see on the TV when trying to stream TV from the iPad2

2nd Gen ATV I can hear but not see on the TV when trying to stream TV from the iPad2

You can look at the ipad under settings, general, about and see if it's 4.3.3.
Or when you connect the ipad to the computer with itunes, it'll tell you on the first tab if you need an update.

From an iPhone 5, I receive the following error message when trying to download content from a radio show app: "Alert Could not parse feed." How do I fix?

From an iPhone 5, I receive the following error message when trying to download content from a radio show app: "Alert Could not parse feed." How do I fix?

Since you're using a 3rd party app, suggest contacting the app developer or looking at their support site for help.

When trying to download app from itunes store I get message: Apple Id has been disabled. I have reset my password, but the problem has not been resolved.

When Trying to download applications from the itunes store, I receive a message that my Apple Id has been disabled. I reset my password, accessed my Itunes Account successfully, but when trying to download, the same message appears.

You need to contact Apple Support, particularly iTunes Store support team. Cheers!

When trying to upload pictures from my camera I get this message although I have uploaded from the same camera in the pastiPhoto cannot import your photos because there was a problem downloading an image.

When trying to upload pictures from my camera I get this message although I have uploaded from the same camera in the past, "iPhoto cannot import your photos because there was a problem downloading an image."

Can you access the images with Image Capture (in your Applications Folder) ?

Quicktime 7.1 buffer overrun when trying to get info from an Indeo 4.4 AVI

Similar Messages

Maybe you are looking for