Quicktime 7.2 under Vista x64

I am using iTunes 7.3.1 under Vista x64 Ultimate with no issues. However, Quicktime 7.2 doesn't work very well.
When I open .mp4 vidoes which run fine under Windows Media Player, Quicktime Player seems to stubmle.
I get the following errors:
-The video screen turns green
-Video stutters
-Audio seems to play ok
I am running on an AMD 3800 x2 with nVidia 7900GTO video card (using latest WHQL video drivers from nVidia).
Are there known issues with Quicktime with Vista x64?

I have the same issue with QT running on Vista. The new version of QT that just came only made things worse!!! Now the tv shows I purchased from iTunes shuts iTunes down when I try to view them. At first, I was getting the green screen, video stuttering, etc.
I tried ALL the recommended fixes:
- Changing the settings in QT to take off Direct3D
- changing the settings in QT to "safe mode"
- Updating my Nvidia graphics card driver
- Going into my bios to ensure my hard drive was not using the RAID array
- Uninstalling QT and reinstalling
This is DEFINITELY a QT (Apple) issue. They simply do not support Vista. I have already stopped purchasing video media on iTunes until QT is updated to run smoothly with Vista.
All that to say... you can search discussion boards all you want, but there is no real fix for QT to run smooth video (audio is OK) in Vista.
AMD Athlon 64 X2 Dual Core Processor 3800+ 2.01 GHz w/ 2Gigs RAM Windows Vista 80 Gig Video iPod
AMD Athlon 64 X2 Dual Core Processor 3800+ 2.01 GHz w/ 2Gigs RAM   Windows Vista   80 Gig Video iPod

Similar Messages

  • X-fi platinum gives out only static noise under Vista x64

    hello. I need some help getting x-fi to work under Vista x64.
    the card works great under XP. no problems at all.
    under Vista x64 drivers install fine. but the card only outputs very loud static sound. sometimes all the time, sometimes only when I try to play music. when I try to play audio the program usually freezes or acts like it takes much longer to play the sound. for example Vista speaker test shows speaker animation for much longer than normally.
    switching to Audio Creation mode usually helps some, but still only static.
    switching in Vista Sound->Recording devices causes a lot of static to be generated as soon as I switch to it (and nothing is being played).
    sometimes there's no sound at all (programs act normally then).
    I've tried all X-Fi drivers I could find (newest and older, including from X-Fi Vista CD) to the same result.
    tried 5. speakers and connect to front panel.
    tried installing drivers in safe mode. tried clearing old driver after driver un-install to reinstall the driver fresh.
    if it wouldn't work under XP I?would have sent it back, bet seeing that it works fine there I can only guess that it has something to do with drivers.
    any help would be appreciated. thank you.

    if anyone experiences the same issue, reformatting HDD and reinstalling Vista from scratch solved tho problem.
    I guess there was some conflict with the previous sound driver.

  • (D20) Marvell SAS/SATA Controller Utility under Vista X64

    Dear All,
    I am the new user for Lenovo workstation. recently I bought D20 for my work. I use the Vista X64 as my O.S. for D20 and I also setup the RAID5 under Marvell SAS Storage Controller.
    Everything running well presently, but I can not find the Marvell SAS/SATA Storage Controller utility to monitor the RAID volume under Vista x64 ? 
    Can you advise me where I can find it or how I can monitor the RAID volume under Vista X64 ? 
    Thanks,
    Cody.
    Solved!
    Go to Solution.

    cody,
    currently that's the only version available that i could find and the only one listed on the D20 driver matrix page.
    all you can do is try installing it in vista and see if it works.   most likely it will.
    -erik
    ThinkStation C20
    ThinkPad X1C · X220 · X60T · s30 · 600

  • S10 RAID configurat​ion = AHCI = Blue Screen under Vista x64

    I'm trying to setup a SATA RAID 1 configuration on my new S10 and it's really a nightmare...if I enable the Raid option in the BIOS it enables also the AHCI feature and my Vista x64 (pre-installed on the S10) don't boot, it just show me a blue screen that I don't even have the time to read. If I disable the AHCI option it's ok I can't boot again.
    The question is simple, how can I achieve to install an updated AHCI driver for Vista x64 in order to boot and then use the RAID features of my S10 ?
    I've tried do download the latest version of the IMSM from Intel (x64 vista version) but it does'nt want to install saying that I haven't the required configuration. My S10 uses an ICH 9 chipset, so I don't understant why I can't install this update.
    Please what is the solution to have AHCI and RAID working on an S10 WITHOUT REINSTALLING Vista (I don't have any installation CD and don't wan't to) ???? Note that my system is up to date regarding the ThinkVantage drivers (and windows updates also)
    Thanks by advance for your help
    Solved!
    Go to Solution.

    I finally achieve to configure AHCI under Vista x64 on my S10 (but still a problem with RAID..), here's how I did :
    - Open registry, go to the Key \HKLM\SYSTEM\CurrentControlSet\Services\msahci
    - Set the DWORD "Start" at 0 (it was 4 on my system)
    - Restart your computer then Enable immediatly the AHCI feature in the BIOS
    - Vista will start without BSOD using it's default SATA AHCI driver. Let it detect & install your AHCI periphals before going to the next step
    - Install the latest Lenovo IMSM update for S10 from here : http://www-307.ibm.com/pc/support/site.wss/MIGR-69​984.html.
    - Restart the computer it should boot without any blue screen, go to the Vista device manager and check that your IDE ATA/ATAPI controller is "Intel(R) ICH9 SATA AHCI Controller".
    AHCI is active now, but RAID still doesn't work...here's what I did :
    - I backup my main HDD with R&R (after having installed AHCI)
    - I restart and enable the SATA RAID in the BIOS
    - Restart again, CTRL+I to open IMSM and create my RAID 1 array (2x500GB) under the name "Volume0" (all parameters to default)
    - Ok, raid array created, I now boot from my R&R emergency CD and restore my backup
    - 3 hours later I reboot...and blue screen again just when Vista starts (seems to be the same BSOD than with AHCI)
    - if I disable the RAID option in BIOS the (but let AHCI enabled) Vista boots again and everything seems fine, and it seems that my raid array is still configured for Windows since I see a Volume0 drive in the device manager. But RAID is disabled in the BIOS so what ?
    I am lost, I spent 2 full days on these AHCI/RAID problems and nothing seems to work correctly. Each test on RAID configuration needs 3 hours of restoration. I am very dissapointed to see how RAID is complicated to configure on the S10, it's is exactly to avoid this kind of problem that I bought a "workstation" and it's a nightmare.
    Hope you can help me, thanks.

  • Losing serial numbers under Vista x64/Boot Camp

    I have Vista x64 installed under Leopard 10.5.2 under Bootcamp (running fine). I installed a 64-bit version of an animation program that required that I enter a bunch of serial numbers for its various modules. The app ran fine after I finished. But when I exited out to Mac OS and later came back into Vista, all the serials were gone and I had to enter them again. This is repeatable. Any thoughts or suggestions?
    Thanks much.
    Dennis

    Snow Leopard changed things

  • PC Suite 6.84, Restore crash under Vista x64 Ultim...

    Hello, there. I have PC Suite 6.84 and, of course contents copier V4.0 on Vista Ultimate x64. Backup went very well with both N73ME or 6267. However, on Restore part, when go to part that ask us which Backup you want to restore, it crashs and Windows has to close program.
    PS. Not a problem with WinXP. All with USB connection.
    What should I do? Any suggestion??
    Also, N-Series PC suite have had the similar problem but right from start Contents Copier V3.0. Is there any bugs in program or it just Winows Vista?Message Edited by delixis on 28-Oct-200703:47 AM
    C6-00 with 8GB MicroSD

    There are no suggestions what so ever. This means I'm alone or no body here use Vista x64 Ultimate version. Please shade some light on me.
    C6-00 with 8GB MicroSD

  • System Control Manager for GX710 under Vista x64?

    OK So i purchased a GX710-250 about 3 months ago and iv been hooked on it .  I just ordered the extended battery from etech4sale.com and i loaded up Vista Ultimate X64 on it.  Everything working great on it as all the items have 64 bit drivers but i ran into a snag with the SCM software for it.  I notice that That the SCM software is only 32X but there is SCM Out there under some other laptop that MSI so i wounder if i can run the software from it on my laptop.  I really just need the Volume Control for in game  but i would to have my little UGI flash up and show me whats going on.  Has any one tried using the SCM from another laptops yet?  was it compatible with the laptop?   where there any issues?  just throwing this out there since i don't think MSI would go back and rebuild the SCM for 64X Vista.
    PS
    Vista 64 is the future....get use to it.  I love it and the Emu system built into it is good enough already.

      o well i still got 2 years to get use to this system and all so i don't mine installing it on my pc...anyways when the time comes and sooner or later everyone will have to upgrade in some format... i just hope 7 will go up to 64 bit also.  I've been on 64 for about a month now and I've seen no performance decrease but in fact seen performance improvement .  My Friends and I see it its time for a generational leap in technology and have a windows system be only 64 bit.  But knowing Microsoft they are going to make Vista and Windows 7 the transitional OS like they did back in the early 90 with windows 3.0 and 3.1.  So i want to know whats going to be the Windows 95 of the 2000 and force a new 64x standard . I'm sure im going to keep my XP Cd until 2010 when they kill support for XP .

  • AC3Filter Dolby decoding on Xfi under Vista x64 - please he

    How do I set up AC3filter to decode the signal from my satellite box optical in?I have the audio optical output from my Sky+ satellite receiver connected through the I/O module to my?X-Fi XtremeGamer Fatalty Pro. My Creative Inspire T7700 7. speakers are connected directly?to my soundcard with the 7. audio cable. I can hear normal sounds fine through my system, but anything broadcast with DTS (DD) doesn't work - i guess because Vista does not support hardware decoding. So I'm trying to use A3filter to decode for me. However, I can't work out the settings I need to use. Any ideas? Many thanks.

    Dolby Digital (DD/AC3) is completely different form DTS. I'm not sure that Sky transmits DTS, so assume thats a typo. Chances are that there is no support for incoming decode of multichannel audio via Creatives crap Vista drivers, compounded Vista's **bleep** DRM controls and removal or DirectSound. If that's the case then at most you will only get a stereo stream passed from the optical in to the soundcard, so any software like AC3Filter or FFDShow's direct sound filters wont work anyway. From the Vista FAQ:?Will decoding of Dolby Digital and DTS signals be supported in the future? If not, why not?
    These functions are not supported at driver level in Windows Vista and going forward will be supported at application level by applications such as Power DVD or WinDVD.
    Perhaps when/if Creative pull their finger out and get some proper drivers out there will be software support for decode of multichannel, (if there isnt already), although it begs the question of why Creative are incapable of doing the same at driver level or via their own software.

  • Crystal Reports 2008 in Windows Vista x64 + IIS7 DOESNT WORK!!!!!! HELP!

    Hi,
    I´m developing an application with Microsoft Visual Studio 2008 and Crystal Reports 2008 Professional
    (i´m not using the Crystal Reports 2008 for .Net basic)
    As I have Windows Vista x64, my ASP.NET applications run under IIS7, but for my surprise, Crystal doesn´t work under Vista x64 + IIS7. I got the following error:
    An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required.  Please go to http://www.businessobjects.com/support for more information.
    When I run the same routine in an Windows Application the error doesnt occur. It only happens under Web Applications.
    I tested in a Windows Vista 32 bit and there´s no error....
    Crystal Reports 2008 does not work in II7 x64 ?
    Is there any solution?
    Please.... help me!!!!!

    Hi Fernando,
    Please read and follow the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] for future topic posts as yours violates the current policy.
    You will need to build your application to run in 32 bit only mode. This note explains how to do it:
    [Set app to 32 bit mode|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do]
    Jason

  • Anyway to get an Ipod to work with Vista X64?

    I recently built a computer under Vista X64 and remarkably enough, the most manufactured piece of hardware I hook up to it is the only one that isn't supported by its manufacture. Whether or not this is extreme incompetence or complications, I will never truly know but anyways....
    Is there anyway to sync an Ipod with a 64bit version of Windows Vista. I don't care whether it is through Itunes or not, I just need to be able to add and remove video and music from my Ipod.

    You can try Winamp or Xplay.

  • 4502 connects to wireless router but will not load as printer to Dell 1545 Vista x64 wireless

    HP 4502 shows and active wireless connection to router and router shows 4502 is connected and has MAC pass-thru. HP software install on Dell 1545 computer under Vista x64 was fine until the connect wireless choice was selected. Result was printer was not loaded. Dell does not have bluetooth board so couldn't use wireless direct option on printer. Printer worked well wireless at one time but when internet connection to AOL was lost something went astray. Printing test page wireless while in HP printer control software on computer works fine but that is rather boring after a while, and very frustrating trying to understand why thats' possible when printer does not show as available for connection from any other program. Have uninstalled HP software, cleaned registry, set printer to factory default, powered down and unplugged all, reinstalled from scratch twice with same result. ANy suggestions?

    Hi Sam_lost,
    Thank you for your response! I have a few more solutions for you:
    Please try going through this guide, An 'Unable to find printer' Error Displays for the HP ENVY 4500 e-All-in-One and HP Deskjet Ink Adva....
    Try this Microsoft Fix It program. Fix problems that programs cannot be installed or uninstalled.
    If those steps do not work then try the following:
    Backup your files. Back up your files.
    Re-install Windows Vista. Installing and reinstalling Windows.
    Hope this helps, and have a good day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • [Vista x64] Microphone problems with X-Fi and 2.15 drive

    Hi guys,?I'm having a problem with the 2.5 drivers on my X-Fi Platinum card, under Vista x64. It seems the microphone inputs (both on the card and on the breakout box) have problems, any recordings stutter and pop rapidly, making any recordings (or voice chat)?quite useless. This issue doesn't occur with the 2.3 drivers. Is there any known solution to this problem yet?My system: e6600 CPU, Asus P5W-DH motherboard (975X chipset), 4GB RAM, 8800GTX, X-Fi Platinum. Thanks.

    hey Darkman,
    since I never had this problem with installing this software, I cant really tell whats wrong, but you dont need it anyway to use the x-fi.
    but you may want to try one thing, since it crashes at 27% something may still be in use, so check your task manager and close everything that has CT in its name. then try reinstalling again. If that still doesnt work, try to empty your temp folder, its located in documents and settings/user you are/local settings/temp
    if that still doesnt work, try maybe something stupid, wait a bit longer than usual and keep the install window in the front to watch the process, maybe your pc is just a bit slowed down by other software so it may take longer than normal

  • Vista x64 SP2 & Reactivate

    Something interesting is happening. AA has been on this computer for over a year.  After installing SP2 whenever I am on the net and I start AA 3.01 the activation screen pops up, and it seems I do an activation.
    If I am not connected to the net, via my  wireless network where I have to log in, the activation screen does not pop up. Started doing this after installing SP2 x64.
    Interesting.....
    Duff

    I found the problem. I had installed a VST demo version of Antares Autotune Harmony Engine and the needed the 64 bit iLOK driver.  Antares states that H-E may or may not work under VISTA x64.  I had installed H-E but had not tried it for a few days,  my troubled started after those few day when  I installed the iLOK driver. Uninstalling didn't get it all,  I had to manually clean it from my registery which seems to have resolved my problem.
    DUFF

  • Vista x64 cannot run Quicktime

    i have vista x64 and i have installed quicktime many times to try and solve this problem. When i click on quicktime to open, it says that "quicktime requires windows 2000 or later" and "please check compatibility mode and make sure it is deselected". Now i DO have compatibility mode deselected and it is still giving me this error. any help would be appreciated.

    A lot of programs don't support the 64bit format... perhaps the QT you are trying to install is one of them? I think there's a 64bit version... forget what it's called

  • Audition under XP x64 or Vista Business x64?

    Anybody running this under x64 OS of either Server, XP, or Vista?
    I am currently running Audition 2.0 under XP x64 just fine other then the lack of DVD Audio plug in, but was wondering if it will perform the same for v3.0. I realize the specs say it is for 32bit (x86) only but then it said that for 2.0 as well.

    Durin,
    I'm sure there are others who will be encouraged by your update to me in the Vista 64-bit question. Very helpful.
    You write that Microsoft is taking this seriously and I can attest to that. I was very impressed with the five phone conversations with (both to and FROM) them on this issue. They are taking it very seriously. One conversation was two full hours! The next one moved the matter to a "higher level" of tech service called their Research Division.
    Interestingly to them, I was told, was that by way of one of the Adobe user forum threads I referred them to, the one from "Roy" at Adobe, I was able to "help" them on the problem. Your reply is no less impressive.
    As to the 64-bit PC on which I discovered the problem, I took it back to the store and downgraded to a 32-bit Vista PC. Based on the strong feedback from both Adobe and Microsoft, I will return the 32-bit PC and re-buy the 64-bit PC. (And, sparked by one of the thread's contributors, while I wait I can sure keep business going on my old XP).
    That is fine for me, except for now I can't help you on your request for more information on how reliable the "push clock" suggestion is. For you and all reading this, in all honesty I probably did not give "Roy's" Push-The-Clock-Ahead remedy a fair chance. As you can imagine, if Microsoft was concerned enough to spend AT LEAST five hours on the phone with me over three days, I was frustrated enough to give the "clock" thing a true trial.
    Thanks again for the good feedback. As "Ozpeter" said in this string, it is very good for you to reply and thanks to Adobe to be doing so in this venue.
    Still loyal, waiting, and thanks much,
    -Rich Petersen

Maybe you are looking for