Quicktime 7.4.1 Hangs Up Crashes System When I Try to Install on Tiger 4.11
I'm running Mac OS X.4.11 on a 800 MHz G4 PowerPC with 1GB SDRAM.
When I tried to install it through software update (several times now over a number of weeks) it is terminated by software update and moved to the trash. When I have rebooted and try to run the installer after removing it from the trash, it hangs up the system and I have to do a manual cold boot using the switch in the back (horrors). When I went to the Apple download site I noticed that the Tiger download wants 10.4.39 while my last update is to 10.4.11 with no way visible to get to 10.4.39.
When I go back a step and try to download Quicktime for Panther which only requires 10.3.9 the software does a check that says that it cannot be installed on my machine.
I am currently running Quicktime 7.3.1 Pro and am not sure what the heck the problem is. Any ideas as to what I can do?
Now of course iTunes is telling me to install it. But I don't think doing a software update from iTunes is going to do any good.
Other tidbits. I have a number of non-networked external drives, both USB and Firewire, I have run through procedures with these both on and off as the 1T Firewire drive backs up all the others. This has a backup of the QT software - could this be the problem even though I have tried installs with all external drives turned off.
Also, I have Flip 4 Mac and a number of other players for various formats. Is this an issue?
Thanks!
I may write comedy, but I assure you, this is no laughing matter!
Peter
Try using the "combo" update for 10.4.11 instead.
Similar Messages
-
HI
in my sharepoint farm has
Language Pack for SharePoint, Project Server and Office Web Apps 2010 - Arabic العربية
Microsoft SharePoint Server 2010
installed
is any service pack 2 there for language packs for arabic as i installed service pack 2 sharepoint 2010
sucessfully
and after i go to apply dec 2013 CU it is not installed
it thrown a messege the expected version of the product not installed on the system
dec 2013 cu in sharepoint 2010
current sharepoint farm has below
adilHi,please find the below URL that exactly talking about the issue.
http://expertsharepoint.blogspot.de/2013/10/the-excepted-version-of-product-was-not.html
Find the detailed installation of of CUs in Post categories on blog
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/ -
Hi
Due to impossibility to upgrade the i tunes version installated on my computer, i decided to remove it because i had needed to sincronize my new iphone 4s. But when i try to install the i tunes newer version the installation hangs on the collecting product information and only after a long wait i receive the following message :
An error occurred during the installation of assembly ‘Microsoft.VC80.CRT.type=”win32”,version=”8.0.50727.6195”,publicKey Token=”1fc8b3b9a1e18e3b”,processorArchitecture=”x86”.Please refer to Help and Support for more information. HRESULT: 0x800736B3
HeeeeeeeeeeeeeeelpWhat version of Windows are you using? This is not a problem with iTunes. It may have to do with an issue of the compatibility of a newer version of iTunes with an older Windows system/older hardware.
What do you want to synchronize? If you were previously using iCloud you should be able to restore most of your oringinal content onto your new phone via was was last synched with the iCloud on your previous phone/device. -
Hi everybody.
Im still hanged by the same problem i reorted in the message listed below ten days ago.
Is there anyone can hep me ?
Due to impossibility to upgrade the i tunes version installated on my computer, i decided to remove it because i had needed to sincronize my new iphone 4s. But when i try to install the i tunes newer version the installation hangs on the collecting product information and only after a long wait i receive the following message :
An error occurred during the installation of assembly ‘Microsoft.VC80.CRT.type=”win32”,version=”8.0.50727.6195”,publicKey Token=”1fc8b3b9a1e18e3b”,processorArchitecture=”x86”.Please refer to Help and Support for more information. HRESULT: 0x800736B3What version of Windows are you using? This is not a problem with iTunes. It may have to do with an issue of the compatibility of a newer version of iTunes with an older Windows system/older hardware.
What do you want to synchronize? If you were previously using iCloud you should be able to restore most of your oringinal content onto your new phone via was was last synched with the iCloud on your previous phone/device. -
I have an IPad 4. After updating the system, when I try to look at picture on Facebook and make it larger, there is just a "circle" in the middle of the page instead of the picture. Can anyone help me?
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss) -
Hi. I was trying to update my Itunes to the newer version but now when I try to install it, it comes up with Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services. How do I fix this?
Hi LyfsGD!
Here is an article that can help you troubleshoot this issue with the Apple Mobile Device Service:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Thanks for using the Apple Support Communities!
Cheers,
Braden -
I just bought and downloaded quicktime Pro for it's exporting capabilities. When I tried to install it on my imac it said it couldn't because QT 10 already exists on computer. When I dumped quicktime 10 in the trash and restarted computer, I still am unable to install.
You can't install that version on Snow Leopard. Look here instead:
http://support.apple.com/kb/DL923 -
When I try to install adobe photoshop 13 on my computer it comes up with the following error message " This installer does not support installation on a 64bit windows operating system" error code 6. How to I recify this? TIA
You can try downloading the 64 bit version. You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html -
when i try to install itunes i get an error that says to verify that i have sufficient privilege to start system sevices. I am the system administrator.
Hi annibu757,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden -
I am running 10.7.5 but when I try to install 10.8.2 I get an alert that says 10.8 is required first. Can't find a 10.8 system upgrade. What do I need to do to install Mountain Lion?
Buy it from the Mac App Store.
(70259) -
When I try to install the latest version of iTunes, during the installation I get error messages saying that a program is trying to change registry and the installation is stopped.
After this happens the only way that I can open iTunes is to do a 'system restore' to an earlier time.
Has anyone else experienced this and can you help?Could you please post the exact text of the error message or provide a screenshot?
There is advice on issues with the update at Troubleshooting issues with iTunes for Windows updates. One of the entries in the further information section refers to a possible registry permissions problem which might be what you are seeing.
tt2 -
I have the system "windows 8.1". When I try to install Photoshop Elements 9 I became the error Message; Photoshop can't be install, I need the Internet Explorer 4.0 or higher. The setup will be closed.
There is a problem with IE10+ in that it is mistakenly seen as being IE1. To get around this either use a different browser or use compatibility view (http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-10)
-
HELP! Bridge crashes when i try to install extentions
Hello
Im new to flash and reallyenjoying it
My issue is that when I try to instal the photoflow extention, or TN2 gallery bridge just crashes...
Can i install manually?Which version of Flash and these two extensions are you using? Which OS are you using? Please make sure their versions are compatible, and you have sufficient privilege to install files included in extensions to their destination folder.
Maybe you can get the answer about how to install these two extensions manually from http://www.forum.flashloaded.com/boards/forumdisplay.php?f=122 and http://www.forum.flashloaded.com/boards/forumdisplay.php?f=99 . -
I have purchased Mosaic World and it keeps crashing and when I try to restart it, it will not work. What do I do?
Hello Vicarage00,
It sounds like the app on your iPad is quitting unexpectedly. I recommend following the steps in the article below for an issue like this (you can skip the step to download another app from the App Store since it is not related to this issue):
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Thank you for using Apple Support Communities.
Best,
Sheila M. -
When I try to install (upgrade) to Quicktime 7, I get 'unable to uninstall older version, contact your technical support group'.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATION" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up").
In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC. Now try another QuickTime install. Does it go through properly this time?
Maybe you are looking for
-
Stuck in grayscale, can't access image mode rgb
For some reason photoshop decided I didn't want to work in color on a certain image anymore, and isn't allowing me to access the usual fix for undoing grayscale. I've been pulling my hair out trying to recover this image and can't find a solution onl
-
Dear All, I need to create quick POC that will involve provisioning to multiple resources during OIM profile creation. One consolidated e-mail notification should be sent as a result. 1. I never used simulated/fake/manual resource. If you used it in
-
ALE Error Handling with Workflow
Hi All, I have some issues with using workflows with idocs: In our process codes , the business object , start event for error handling and success event has been configured. Now if the workflow_result is 0 then success event is triggered and if work
-
Hey I have a program that runs a server and database check every second or two to make sure that they are still alive,the problem that I am having is that the checks are carried out by an external class and when an error occurs I want the program to
-
How to install Printer in network
Hi Currently i am using VPN Connection and working on Client server but i want to take printout on my local printer.As i am not in my network how do i take printout in my network.Please tell me what re the settings required .