Quicktime 7.x.x Full Install for Panther 10.3.9

Hello
As my PowerMac G5 just blew a power supply I had to dig out my old B&W G3 which has been updated with a G4 550MHz processor, running Panther. I thought I would update Quicktime Pro 6 to Quicktime 7 fot Panther. I was unable to view my tutorial videos so this was my motivation.
I downloaded QT 7.5 for Panther but after installing, rebooting, & repairing permissions QT bounces a couple of times in the dock, the beachball spins, and the drive whirs like crazy but to no avail. Quicktime is seen by Force Quit, which I have to do but Software Update does not see it.
I've since tried installing v7.4.1, 7.3.x & 7.1 using Pacifist but nothing has changed.
I suspect that the problem occured because I went from v6 to v7 without a full install for v7. In any event does anyone know where I might be able to download a full install of Quicktime 7 for Panther ?
Thanks
Tim

John:
Panther is a very stable OS, and although Tiger offers some new features you can likely live very well withough spotlight and widgets. I run Tiger on my G3 Pismo, but hesitated a long time before I did, because I liked Panther so well.
I concur with donny, that staying where you are is not a bad idea, especially if you don't have the money to spare. Also, whether you upgrade your OS or not you'd get a better payoff putting a bit of money in upgrading your RAM.
Good luck.
cornelius

Similar Messages

  • Looking for Classic Mac OS QuickTime 6.0.2 Full Install

    Hello:
    I would like to finally resolve a problem I've had for several years. When I upgraded to QuickTime 6.0.3 a couple of .avi files which played fine with QuickTime 6.0.2 do not work correctly. About 30 seconds into the clips, the video stops. Audio continues fine. I am also unable to convert the files to another format because of a "compression error." Since I know these files worked when I had QT 6.0.2 I would like to downgrade so I can convert the files.
    I've looked for a long time, but have been unable to find the Classic Mac OS QT 6.0.2 Full Install file anywhere. Does someone have this? Of course this would be the one file that I do not have a backup.
    TIA!

    The name of the Apple downloads file for QT 6.0.2 was probably something very close to this:
    QuickTime602_Installer.smi.bin
    Have you tried searching among those old legacy file downloads on the Apple downloads? I know they are sometimes hard to find and reasonable searches using the Apple search often gets one no where. You might try googling for the old quicktime and get into the Apple downloads through the "back door" so to speak.

  • Where can I find Safari for Panther?

    I've found the Safari 1.3.1 Updater but that won't allow me to re-install Safari (only update).
    The problem is I inadvertently installed Safari 3.1.1 on my G4 10.3.9 Mac (don't ask me how the installer package allowed that to be done) and that Safari 3.1.1 wouldn't open. Now I don't have a functioning Safari Browser at all.
    Where can I find a full Safari for Panther?

    Note that you can't simply reinstall Safari from the Panther Install disc as a fix for this problem - you need to do a full Archive & Install, or follow a more complex series of steps. This is because the Safari 3.x updater also upgraded the Mac OS Webkit to versions that are incompatible with Panther (this affects Mail, iChat, etc.).
    The more complex series of steps is outlined in the first link, with some additional helpful links to Safari 1.x updates in the second link:
    1. http://discussions.apple.com/thread.jspa?messageID=6889330
    2. http://discussions.apple.com/message.jspa?messageID=7073218
    Hope this helps...

  • I need the full install version rather than the install stub file. Multiple computer installs save internet bandwidth when the full install is downlo

    I need the full install for firefox, to install on multiple computers. Multiple Firefox downloads uses too much internet data download budget. I cannot find a link to the full install. Satellite internet has limited data usage budgets.

    http://mozilla.mirrors.tds.net/pub/mozilla.org/firefox/releases/latest/
    Select your computer, then language, then download the Setup File (not stub)

  • Full-Installed Tiger, iPhoto missing. Should I have started from Panther?

    Couldn't find in Search so here goes. For various reasons I chose to go ahead and run a full install of Tiger after my OS crashed. Everything works fine except that iPhoto and GarageBand are nowhere to be found. Should I have started with the original Panther 10.3.2 before installing Tiger? Alternately, can I simply install the missing apps from the Panther software without starting completely over?

    Hi, and a warm welcome to the Discussions!
    Too late nw, but the Archive and Install feature...
    http://docs.info.apple.com/article.html?artnum=107120
    Would've been the way to go.
    Normally, those APPs are on iLife disks... do you have them?
    http://www.apple.com/ilife/
    Though some install CD/DVDs had optional installs, Load your DVDs and see if there is Custom Install or such on them.

  • Is OS X 10.4 Tiger Full install CD Mac New X code the right thing for me?

    Please Help - I have been having problems on some websites and with Safari - I can't afford to buy a new or even a 'new' used Mac with Intel - I have been thinking that upgrading to Tiger will solve my problems, I have committed to buy (on Ebay) but not yet paid for OS X 10.4 and am now worried that I am buying the wrong thing.
    The description of what I am buying is Apple eMac OSX 10.4 Tiger Full install CD Mac New XCODE
    Rare genuine factory Mac operating system, full installation CD set for Apple OS 10.4 Tiger. Normally Tiger OS 10.4 comes in single DVD format which most older eMacs don't have, so this OSX 10.4 is a rare item in CD format. 16 install CD's plus an XCODE Development tools version 2 on 17 discs.
    My eMac specifications are:
    Machine Model: eMac
    CPU Type: PowerPC G4 (1.1)
    Number Of CPUs: 1
    CPU Speed: 1.25 GHz
    L2 Cache (per CPU): 512 KB
    Memory: 768 MB
    Bus Speed: 167 MHz
    Boot ROM Version: 4.8.2f1
    Can anyone please help a damsel (albeit not a very young one) in distress?

    No, its only 10 pm at the moment.
    OK, that's good news as it is the latter type eMac, though not identical to the latest, it falls into the 'second half' of the eMac series.
    The only difference I can see is that your model has a slightly slower graphics card but is the same model card. It seems only a subtle difference.
    I believe there is a high probability that those disks would work.
    Given they are considerably cheaper £27 or less it is probably worth risking. I'll guess 85% + chance of success.
    The retail Tiger disks are just black, but they are quite rare, and overpriced.
    Here is a comparison at
    http://fastmac.com/osx.php
    where they want over £50 (US79.95) so the ebay thing looks good.
    You could change web browsers to Opera or Camino but Java versions end at 1.4 in Panther.
    10.3 is pretty ancient in internet years, so an OS upgrade will at least keep you with a useful tool, even if not at the cutting edge.
    10.20pm see you tomorrow.
    Message was edited by: roam

  • What to prepare for if an XP full install is required

    For reasons too lengthy to describe it looks like I'm going
    to have to do a full install of XP on my laptop after running for
    3-4 years. Lots of apps to reinstall.
    Are there things I should be aware of that I'm going to have
    to deal with (other than an install) for Studio 8 or CS2?
    Tom

    Export your site definitions.
    Better, get this -
    http://mm-exporter.joexx.de
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "TCarp" <[email protected]> wrote in message
    news:eseluq$jkc$[email protected]..
    > For reasons too lengthy to describe it looks like I'm
    going to have to do
    > a
    > full install of XP on my laptop after running for 3-4
    years. Lots of apps
    > to
    > reinstall.
    >
    > Are there things I should be aware of that I'm going to
    have to deal with
    > (other than an install) for Studio 8 or CS2?
    >
    > Tom
    >
    >
    >

  • I just bought an app, $ 29.99, I installed it, but apparently only free version is installed. Apps asking me to buy the full version for 39.99, I cant find the way to communicate with app store. Help me please

    I just bought an App, $29.99. I got the free version apparently. Every time i try to use it message  says buy the full version for 39.99. What i am suppose to do now????

    Excuse me moinpara, but I know how you feel and I have been there many of times. It is not Itunes fault that your purchase inquiry was proposed to you as invalid, rather much more sort of than rather it being. If this happened to me, I would research that App, try to find out what went wrong. Heh, if you or I were to ask myself I could either tell you that you are putting yourself in a hole! Woah, but now this seems to me like something that would be simple to just contact an iPhone or apple associate and tell them why this happened to you, especially right after Christmas, or whatever religious holiday you choose to follow
    If I were to be in your shoes I would of spent the money in the itunes store on something else! But that is just me.

  • Full Oracle install for PHP?

    Hi,
    Can sombody tell what needs to be installed before I can start
    compiling oracle support into PHP3? I don't want to do a full
    install....
    Or are the libraries and header files available as a separate
    package somewhere?
    Thanks in advance
    Ronald van Kuijk
    null

    Ronald van Kuijk (guest) wrote:
    : Can sombody tell what needs to be installed before I can start
    : compiling oracle support into PHP3? I don't want to do a full
    : install....
    You can only install Oracle with a full RDBMS.
    : Or are the libraries and header files available as a separate
    : package somewhere?
    Install it and take out what you need.
    Thats the only way (I guess).
    Maybe you can find a hint here
    http://www.schou.dk/oracle/install.html
    http://www.schou.dk/oracle/demo/
    best regards
    hans
    null

  • Can't get to the installation window for Panther 10.3 upgrade

    Hello all, thanks for reading,
    Here's the deal:
    I have an iMac, 500 Mhz, G3, 128 RAM that originally has Mac OS 9 built into it. Recently (a day or two ago), I wanted to format my computer because it was giving me too much trouble (a message saying that there wasn't enough memory kept appearing and askign me to quit an application to free some up), so I introduced the Mac OS 9 restoration disk and initialized my HD.
    Everything went well, I was able to re-install the OS 9 and the necessary upgrades (up to 9.2.2) so that I could re-install my Panther 10.3 OS. However, when I reboot the computer with the installation disk in (so as to get to the installation window) it hangs when it reaches the white screen with the grey apple in the middle and the spinning thing on the bottom. It does not freeze up, 'cause you can see that the spiral still goes round and round, but disk activity ceases and it does not progress further than that (I have left it up to an hour in that state and nothing happens).
    What can be my problem? The disk is in good conditions, and it is not the driver because I can run any other cd and it even reads the Panther disks (all of the 3)..... please help!
    Thank you.
    iMac   Mac OS X (10.3)   128 RAM - 30 Gb HD - 500 Mghz - G3 PowerPC

    Psike:
    Welcome to Apple Discussions.
    To install Panther your computer will need to meet the minimum system requirements for Panther. Your RAM seems to be very marginal and I recommend that you upgrade your RAM to at least 256 MB or better still max it out to 1 GB.
    You will need to purchase the Full Retail version of Panther. Be aware that Computer specific or upgrade versions should be avoided since they are optimized for the computer to which they are specific and will therefore very likely cause problems during or after installation. On the legal side, it may be a violation of the Software License Agreement which statesThis License allows you to install and use one copy of the Apple Software on a single computer at a time. This License does not allow the Apple Software to exist on more than one computer at a time...If you do not have a Full Retail Version you can purchase universal installer Panther disks, guaranteed to install, from applerescue.
    In terms of your specific problem. Here's what I suggest:
    Insert Installer disk and Restart, holding down the "C" key.
    Go to Installer menu and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
    After disk has been repaired, with Disk Utility still launched and in the First Aid tab:
    Click Repair Disk Permissions button.
    Quit Disk Utility and open installer.
    Select install option.
    You may wish to Customize by deselecting Foreign Language Translations, unless you need it, and Additional Printer Drivers. This saves some disk space.
    Proceed with installation.
    After restart and set up:
    Restart computer
    Go to Applications > Utilities > Disk Utility
    Repair Disk Permissions (as before)
    Go to Apple Menu > Software Update
    Install all updates
    Repair Disk Permissions again.
    Please post back with questions or comments.
    Good luck.
    cornelius
    Message was edited by: cornelius

  • Quicktime 7.1.3 wont install, iTunes wont work.

    When ever I start iTunes,first of all it never opens up but a error comes up saying....
    "QuickTime version 7.0d0 is installed, iTunes requires QuickTime Version 7.1.3 or later.
    Please Reinstall iTunes"
    So I reinstall iTunes, I have done this about 4 times.I have also removed iTunes and reinstalled it completly but it seems like Quicktime is not updating with it. Is there older Quicktime folder that I need to get rid of or something?

    I was having the same problem. I followed the post from Colin and the link to 'Trouble installing iTunes or QuickTime software in Windows' and after a full uninstall following all the steps and 'Disable other conflicting software' after doing this and reinstalling it has started working again.
    I hope it works for you.

  • Beige G3 Won't Boot After Installing Xpostfacto & Panther

    I successfully installed OSX panther on a powermac G3 233mhz. While installing Norton utilities, it locked up. Now I can't get it to boot on anything.
    I've removed all cards, tried swapping ram, replaced the battery, zapped the pram, hit the reset, it will not start up off any cd, tried starting up with shift, option, shift-option-command-delete, nothing seems to work. I even unplugged the drive, and put in another drive and it won't start up on anything. The farthest it will go is the gray OSX screen with the apple and then I get a no symbol.
    If I hold down the option key, I will get a gray screen with a OS9 happy mac face, then it restarts over and over.
    If I hold down the command-V I can get into the verbose mode, where I do not see any errors, but get the "Still waiting for root device" and then no matter what cd or tape I put in, nothing.
    Anyone have any suggestions? The machine was working fine before I installed the xpostfacto.
    You can also email me at [email protected]

    Hi Mike,
    My first thought is that Norton has a history of not playing nice with the Beige.
    Also, which version of XPostFacto did you install? Version 4 on the Beige is best for Tiger only. If you go to the download page, and scroll WAY down to the bottom section showing Version History, you'll see version 3.1. That's the version to use when installing Panther. Here's the link -- http://eshop.macsales.com/OSXCenter/XPostFacto/Framework.cfm?page=XPostFacto3.ht ml
    Ok, now, to get you started up in anything. I'm assuming you have OS9.2.2 installed?
    Panther needs to be installed on a drive or partition of less than 8 GB. If your drive is larger than that, you'll need to partition it, with the first partition set at 7.9 GB. That's where Panther needs to be.
    Please post back with info on what your Beige contains -- PCI cards (USB? Firewire? Video?). When installing you should have nothing connected to any Firewire ports.
    Also, try inserting an OS9 install CD and restart, but do NOT press any keys, not even the C key. Sometimes this will get the Beige to boot from the CD (don't ask me why, but it works for me and others).
    Also, what kind of Panther install CDs were you using? If they were grey, and not the white ones with big Black/Silver X on them, they are not full retail install CDs and may not properly install Panther on your Beige. The grey CDs are machine-specific. You'll need full retail install CDs to be sure to have a correct install.
    Please post back and tell us the specs on your Beige and how it's going. Fear not, I'm sure we'll be able to get you up and running again!
    Tina

  • HT201456 I have tried to install Windows 8.1 64 on my new Mac Book Pro from a full install disc.

    I have tried to install Windows 8.1 64 on my new Mac Book Pro from a full install disc. When I get the the choice of partitions to install Windows 8.1 on the Windows installer says that the Bootcamp partition is not valid.
    Has anyone encountered the same issue?

    BCA creates the partition as FAT, which the installer needs to format.
    Please see https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2 for reference. Where does it break in your case?

  • Cannot execute Install for database ORACLE_HOME

    Dear ALl,
    EBS 11.5.9 with Windows 2003, during multi-node installation error.
    log file
    Oracle Applications Rapid Install Wizard Install log
    >> Using Rapid Wizard Version : 11.5.9.21
    >> Install session started : Fri Jul 25 17:41:05 GST 2008
    >> Rapid Wizard source location : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz
    >> Command Line arguments for this execution :
    =================================================================
    Install Session Information
    Host Name : sysd.apps.com
    Host Operating System : Windows 2000
    User running Install : applmgr
    =================================================================
    InstUpgPanel - User chooses to Install Oracle Applications
    NumNodesPanel - Multi-node Selected
    SIDSeedPanel - The PROD database is set to PROD fresh install database
    ProductPanel - The following are the selected Product Groups for instance PROD
    Basic
    E-Business Intelligence
    Marketing
    TeleSales
    Field Sales
    Order Management
    Inventory Management
    Purchasing
    Discrete Manufacturing
    Process Manufacturing
    TeleService
    Service Contracts
    Project Costing
    Project Billing
    Financials
    Human Resources
    ProductPanel - The following are the selected Product for instance PROD
    0
    160
    190
    265
    601
    174
    175
    690
    874
    709
    454
    452
    450
    558
    451
    530
    517
    520
    549
    670
    691
    882
    521
    676
    880
    696
    697
    660
    522
    544
    869
    676
    279
    697
    660
    702
    401
    665
    673
    401
    665
    201
    202
    250
    401
    702
    703
    704
    705
    706
    712
    550
    551
    552
    553
    554
    555
    556
    557
    514
    511
    542
    862
    696
    872
    170
    866
    518
    515
    510
    870
    524
    542
    275
    275
    101
    140
    200
    222
    240
    260
    600
    8400
    8401
    8450
    8901
    231
    673
    800
    804
    8301
    8302
    TerritoryPanel - The following are the selected settings for instance PROD
    LanguagePanel - The following are the selections from the Language Panel:
    US - American_English
    US - American_English
    US7ASCII
    US7ASCII
    AMERICA
    MultiNodePanel - Selected nodes:
    [Ljava.lang.String;@eddac
    [Ljava.lang.String;@7b7565
    [[Z@583cf4
    QuickPanel - Empty Fields were encountered. Number of empty Fields:1
    QuickPanel - The following are the selected top directories for instance PROD
    e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password apps.com
    QuickPanel - The following are the selected top directories for instance PROD
    e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password apps.com
    MountsPanel - The following are the mount points selected by the user for instance PROD
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    US7ASCII
    US-ASCII
    e:\oracle\prodcomn
    e:\oracle\proddb\9.2.0
    e:\oracle\prodora\8.0.6
    e:\oracle\prodora\iAS
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    e:\oracle\prodcomn\java
    e:\oracle\prodcomn\portal
    e:\oracle\prodcomn\util\jre\1.1.8
    e:\oracle\prodcomn\temp
    applmgr
    password
    apps.com
    C:\mksnt
    C:\VC98
    C:\java\jdk1.3.1
    c:\Program Files\Oracle\Inventory
    MountsPanel - The following are the mount points selected by the user for instance PROD
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    US7ASCII
    US-ASCII
    e:\oracle\prodcomn
    e:\oracle\proddb\9.2.0
    e:\oracle\prodora\8.0.6
    e:\oracle\prodora\iAS
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    e:\oracle\prodcomn\java
    e:\oracle\prodcomn\portal
    e:\oracle\prodcomn\util\jre\1.1.8
    e:\oracle\prodcomn\temp
    applmgr
    password
    apps.com
    C:\mksnt
    C:\VC98
    C:\java\jdk1.3.1
    c:\Program Files\Oracle\Inventory
    MountsPanel - The following are the mount points selected by the user for instance PROD
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    US7ASCII
    US-ASCII
    e:\oracle\prodcomn
    e:\oracle\proddb\9.2.0
    e:\oracle\prodora\8.0.6
    e:\oracle\prodora\iAS
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    e:\oracle\prodcomn\java
    e:\oracle\prodcomn\portal
    e:\oracle\prodcomn\util\jre\1.1.8
    e:\oracle\prodcomn\temp
    applmgr
    password
    apps.com
    d:\MKS\mksnt
    d:\VC98
    C:\jdk1.3.1_06
    c:\Program Files\Oracle\Inventory
    MountsPanel - The following are the mount points selected by the user for instance PROD
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    US7ASCII
    US-ASCII
    e:\oracle\prodcomn
    e:\oracle\proddb\9.2.0
    e:\oracle\prodora\8.0.6
    e:\oracle\prodora\iAS
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    e:\oracle\prodcomn\java
    e:\oracle\prodcomn\portal
    e:\oracle\prodcomn\util\jre\1.1.8
    e:\oracle\prodcomn\temp
    applmgr
    password
    apps.com
    d:\MKS\mksnt
    d:\VC98
    C:\jdk1.3.1_06
    c:\Program Files\Oracle\Inventory
    SettingsPanel - The following are the selected settings for instance PROD
    PROD
    PROD
    US7ASCII
    AMERICA
    1521
    1626
    7000
    8000
    8100
    8200
    8800
    9000
    9100
    9200
    9300
    9800
    10000
    10100
    10200
    10300
    16000-16009
    17000-17009
    18000-18019
    19000-19009
    AppsConfig temp dir set to: C:\DOCUME~1\applmgr\LOCALS~1\Temp
    ConfigFilePanel - Setting temp directory to: C:\DOCUME~1\applmgr\LOCALS~1\Temp <-> C:\DOCUME~1\applmgr\LOCALS~1\Temp\
    ConfigFilePanel - Writing configuration file to: C:\DOCUME~1\applmgr\LOCALS~1\Temp\config.txt
    Port Availability Check :
    Database Port Value = 1521...... Available
    Operating System Check
    command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkOS.cmd
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
    ALLUSERSPROFILE=C:\Documents and Settings\All Users
    APPDATA=C:\Documents and Settings\applmgr\Application Data
    ClusterLog=C:\WINDOWS\Cluster\cluster.log
    CommonProgramFiles=C:\Program Files\Common Files
    COMPUTERNAME=SYSD
    ComSpec=C:\WINDOWS\system32\cmd.exe
    DISPLAY=:0.0
    HOME=C:\Documents and Settings\applmgr
    HOMEDRIVE=C:
    HOMEPATH=\Documents and Settings\applmgr
    include=D:\VC98\atl\include;D:\VC98\mfc\include;D:\VC98\include
    lib=D:\VC98\mfc\lib;D:\VC98\lib
    LOGONSERVER=\\SYSD
    MSDevDir=D:\VC98\MSDev98
    NUMBER_OF_PROCESSORS=16
    NUTCROOT=D:\MKS
    OS=Windows_NT
    Path=C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
    PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
    PROCESSOR_ARCHITECTURE=x86
    PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 11, GenuineIntel
    PROCESSOR_LEVEL=6
    PROCESSOR_REVISION=0f0b
    ProgramFiles=C:\Program Files
    PROMPT=$P$G
    ROOTDIR=D:\MKS
    SESSIONNAME=Console
    SHELL=D:\MKS\mksnt\sh.exe
    SystemDrive=C:
    SystemRoot=C:\WINDOWS
    TEMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
    TERM=nutc
    TERMCAP=D:\MKS\etc\termcap
    TERMINFO=D:\MKS\usr\lib\terminfo
    TMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
    TMPDIR=C:\DOCUME~1\applmgr\LOCALS~1\Temp
    USERDOMAIN=SYSD
    USERNAME=applmgr
    USERPROFILE=C:\Documents and Settings\applmgr
    windir=C:\WINDOWS
    Operating System patch/version test has suceeded
    Port Uniqueness Check :
    All ports are unique.
    File System Check :
    Database ORACLE_HOME created:
    Mount Point = e:\oracle\proddb\9.2.0
    Database ORACLE_HOME admin folder created:
    Mount Point = e:\oracle\proddb\9.2.0\appsutil
    Database ORACLE_HOME temp folder created:
    Mount Point = e:\oracle\proddb\9.2.0\appsutil\temp
    Database Install Log Directory created:
    Mount Point = e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd
    Database System File Directory created:
    Mount Point = f:\oracle\proddata
    Database Log File Directory available:
    Mount Point = f:\oracle\proddata
    Database Data File Directory available:
    Mount Point = f:\oracle\proddata
    Database Index File Directory available:
    Mount Point = f:\oracle\proddata
    File Space Check :
    Disk space on system acceptable :
    Database ORACLE_HOME = e:\oracle\proddb\9.2.0
    required = 2381.0
    actual = 102323.203125
    Disk space on system acceptable :
    Database System File Directory = f:\oracle\proddata
    required = 9259.0
    actual = 457021.93359375
    Disk space on system acceptable :
    Database Log File Directory = f:\oracle\proddata
    required = 49.0
    actual = 447762.93359375
    Disk space on system acceptable :
    Database Data File Directory = f:\oracle\proddata
    required = 8175.0
    actual = 447713.93359375
    Disk space on system acceptable :
    Database Index File Directory = f:\oracle\proddata
    required = 6532.0
    actual = 439538.93359375
    Host/Domain Check :
    command : ping -n 1 sysd
    Pinging sysd [192.168.6.16] with 32 bytes of data:
    Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
    Ping statistics for 192.168.6.16:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    host ping has suceeded
    command : ping -n 1 sysd.apps.com
    Pinging sysd.apps.com [192.168.6.16] with 32 bytes of data:
    Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
    Ping statistics for 192.168.6.16:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    host.domain ping has suceeded
    command : ping -n 1 sysm
    Pinging sysm [192.168.6.17] with 32 bytes of data:
    Reply from 192.168.6.17: bytes=32 time<1ms TTL=128
    Ping statistics for 192.168.6.17:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    host ping has suceeded
    command : ping -n 1 sysm.apps.com
    Ping request could not find host sysm.apps.com. Please check the name and try again.
    Error - host.domain ping has returned an error: 1
    System variable PATH set to:
    C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
    System Utilities Check :
    command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkutil.cmd d:\MKS\mksnt d:\VC98
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
    Setting environment for using Microsoft Visual C++ tools.
    C:\WINDOWS\system32/cmd.exe
    'which' command is available.
    C:\WINDOWS\system32/gnumake.exe
    'gnumake' is available.
    d:\MKS\mksnt/cc.exe
    'cc' is available.
    D:\VC98\BIN/link.exe
    'link' is available.
    ERRORCODE = 0 ERRORCODE_END
    System Utilities Availability test has suceeded
    JDK Availability Check :
    running command : CheckerClass.JDKCheck()
    JDK Availability Test has succeeded , Version Detected is java version "1.3.1_06"
    QuickPanel - The following are the selected top directories for instance PROD
    e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password apps.com
    QuickPanel - The following are the selected top directories for instance PROD
    e:\oracle e:\oracle e:\oracle f:\oracle f:\oracle f:\oracle applmgr password appsa.com
    MountsPanel - The following are the mount points selected by the user for instance PROD
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    US7ASCII
    US-ASCII
    e:\oracle\prodcomn
    e:\oracle\proddb\9.2.0
    e:\oracle\prodora\8.0.6
    e:\oracle\prodora\iAS
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    e:\oracle\prodcomn\java
    e:\oracle\prodcomn\portal
    e:\oracle\prodcomn\util\jre\1.1.8
    e:\oracle\prodcomn\temp
    applmgr
    password
    apps.com
    d:\MKS\mksnt
    d:\VC98
    C:\jdk1.3.1_06
    c:\Program Files\Oracle\Inventory
    MountsPanel - The following are the mount points selected by the user for instance PROD
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    e:\oracle\prodappl
    US7ASCII
    US-ASCII
    e:\oracle\prodcomn
    e:\oracle\proddb\9.2.0
    e:\oracle\prodora\8.0.6
    e:\oracle\prodora\iAS
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    f:\oracle\proddata
    e:\oracle\prodcomn\java
    e:\oracle\prodcomn\portal
    e:\oracle\prodcomn\util\jre\1.1.8
    e:\oracle\prodcomn\temp
    applmgr
    password
    appsa.com
    d:\MKS\mksnt
    d:\VC98
    C:\jdk1.3.1_06
    c:\Program Files\Oracle\Inventory
    SettingsPanel - The following are the selected settings for instance PROD
    PROD
    PROD
    US7ASCII
    AMERICA
    1521
    1626
    7000
    8000
    8100
    8200
    8800
    9000
    9100
    9200
    9300
    9800
    10000
    10100
    10200
    10300
    16000-16009
    17000-17009
    18000-18019
    19000-19009
    AppsConfig temp dir set to: C:\DOCUME~1\applmgr\LOCALS~1\Temp
    ConfigFilePanel - Setting temp directory to: C:\DOCUME~1\applmgr\LOCALS~1\Temp <-> C:\DOCUME~1\applmgr\LOCALS~1\Temp\
    ConfigFilePanel - Writing configuration file to: C:\DOCUME~1\applmgr\LOCALS~1\Temp\config.txt
    Port Availability Check :
    Database Port Value = 1521...... Available
    Operating System Check
    command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkOS.cmd
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
    ALLUSERSPROFILE=C:\Documents and Settings\All Users
    APPDATA=C:\Documents and Settings\applmgr\Application Data
    ClusterLog=C:\WINDOWS\Cluster\cluster.log
    CommonProgramFiles=C:\Program Files\Common Files
    COMPUTERNAME=SYSD
    ComSpec=C:\WINDOWS\system32\cmd.exe
    DISPLAY=:0.0
    HOME=C:\Documents and Settings\applmgr
    HOMEDRIVE=C:
    HOMEPATH=\Documents and Settings\applmgr
    include=D:\VC98\atl\include;D:\VC98\mfc\include;D:\VC98\include
    lib=D:\VC98\mfc\lib;D:\VC98\lib
    LOGONSERVER=\\SYSD
    MSDevDir=D:\VC98\MSDev98
    NUMBER_OF_PROCESSORS=16
    NUTCROOT=D:\MKS
    OS=Windows_NT
    Path=C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
    PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
    PROCESSOR_ARCHITECTURE=x86
    PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 11, GenuineIntel
    PROCESSOR_LEVEL=6
    PROCESSOR_REVISION=0f0b
    ProgramFiles=C:\Program Files
    PROMPT=$P$G
    ROOTDIR=D:\MKS
    SESSIONNAME=Console
    SHELL=D:\MKS\mksnt\sh.exe
    SystemDrive=C:
    SystemRoot=C:\WINDOWS
    TEMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
    TERM=nutc
    TERMCAP=D:\MKS\etc\termcap
    TERMINFO=D:\MKS\usr\lib\terminfo
    TMP=C:\DOCUME~1\applmgr\LOCALS~1\Temp
    TMPDIR=C:\DOCUME~1\applmgr\LOCALS~1\Temp
    USERDOMAIN=SYSD
    USERNAME=applmgr
    USERPROFILE=C:\Documents and Settings\applmgr
    windir=C:\WINDOWS
    Operating System patch/version test has suceeded
    Port Uniqueness Check :
    All ports are unique.
    File System Check :
    Database ORACLE_HOME available:
    Mount Point = e:\oracle\proddb\9.2.0
    Database ORACLE_HOME admin folder available:
    Mount Point = e:\oracle\proddb\9.2.0\appsutil
    Database ORACLE_HOME temp folder available:
    Mount Point = e:\oracle\proddb\9.2.0\appsutil\temp
    Database Install Log Directory available:
    Mount Point = e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd
    Database System File Directory available:
    Mount Point = f:\oracle\proddata
    Database Log File Directory available:
    Mount Point = f:\oracle\proddata
    Database Data File Directory available:
    Mount Point = f:\oracle\proddata
    Database Index File Directory available:
    Mount Point = f:\oracle\proddata
    File Space Check :
    Disk space on system acceptable :
    Database ORACLE_HOME = e:\oracle\proddb\9.2.0
    required = 2381.0
    actual = 102323.203125
    Disk space on system acceptable :
    Database System File Directory = f:\oracle\proddata
    required = 9259.0
    actual = 457021.93359375
    Disk space on system acceptable :
    Database Log File Directory = f:\oracle\proddata
    required = 49.0
    actual = 447762.93359375
    Disk space on system acceptable :
    Database Data File Directory = f:\oracle\proddata
    required = 8175.0
    actual = 447713.93359375
    Disk space on system acceptable :
    Database Index File Directory = f:\oracle\proddata
    required = 6532.0
    actual = 439538.93359375
    Host/Domain Check :
    command : ping -n 1 sysd
    Pinging sysd [192.168.6.16] with 32 bytes of data:
    Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
    Ping statistics for 192.168.6.16:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    host ping has suceeded
    command : ping -n 1 sysd.apps.com
    Pinging sysd.apps.com [192.168.6.16] with 32 bytes of data:
    Reply from 192.168.6.16: bytes=32 time<1ms TTL=128
    Ping statistics for 192.168.6.16:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    host.domain ping has suceeded
    command : ping -n 1 sysm
    Pinging sysm [192.168.6.17] with 32 bytes of data:
    Reply from 192.168.6.17: bytes=32 time<1ms TTL=128
    Ping statistics for 192.168.6.17:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, Average = 0ms
    host ping has suceeded
    command : ping -n 1 sysm.appsa.com
    Pinging sysm.appsa.com [208.87.33.150] with 32 bytes of data:
    Reply from 208.87.33.150: bytes=32 time=295ms TTL=48
    Ping statistics for 208.87.33.150:
    Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
    Minimum = 295ms, Maximum = 295ms, Average = 295ms
    host.domain ping has suceeded
    System Utilities Check :
    command : cmd.exe /c D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\bin\checkutil.cmd d:\MKS\mksnt d:\VC98
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>echo off
    Setting environment for using Microsoft Visual C++ tools.
    C:\WINDOWS\system32/cmd.exe
    'which' command is available.
    C:\WINDOWS\system32/gnumake.exe
    'gnumake' is available.
    d:\MKS\mksnt/cc.exe
    'cc' is available.
    D:\VC98\BIN/link.exe
    'link' is available.
    ERRORCODE = 0 ERRORCODE_END
    System Utilities Availability test has suceeded
    JDK Availability Check :
    running command : CheckerClass.JDKCheck()
    JDK Availability Test has succeeded , Version Detected is java version "1.3.1_06"
    DoInstallPanel - Summary Text
    The Rapid Install Wizard will now install the following:
    Install Oracle 9i technology stack for PROD.
    Install Oracle Applications Database Seed for PROD.
    DoInstallPanel - User continued install at warning dialog.
    DoInstallPanel - Beginning install for all users.
    Starting from Rapid Install Full Stage area D:\Stage_area_11.5.9\oraDB\Disk1
    RapidWiz location: D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz
    Install Media location: D:\Stage_area_11.5.9\startCD\Disk1
    APPL_TOP location: e:\oracle\prodappl
    Database ORACLE_HOME: e:\oracle\proddb\9.2.0
    Database SID: PROD
    Database Context Name : PROD_sysd
    Creating 9.2.0 DB Context from D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp to e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    instantiate file:
    source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
    dest : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    instantiate file:
    source : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    dest : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    instantiate file:
    source : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    dest : e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    Processing DriverFile = D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
    Running Instantiation Drivers for D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
    Total number of processes in Current Install 3
    Processing DriverFile = D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
    Running Instantiation Drivers for D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
    Invalid target file name in driver file: <s_com>\admin\out
    Creation of Directory - E:\oracle\proddb\9.2.0\temp\PROD_sysd Succeeded.
    instantiate file:
    source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun8i.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun8i.cmd
    instantiate file:
    source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun9i.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun9i.cmd
    instantiate file:
    source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrundb.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrundb.cmd
    Step 0 of 3
    Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
    Processing Step 1 of 3
    Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd APPS APPS
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM $Header: adrun8i.cmd 115.24 2003/07/17 00:44:02 psaddi ship $
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and overwritten.
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM If you were instructed to edit this file, or if you are not able to use the settings
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM created by AutoConfig, refer to Metalink document 165195.1 for assistance.
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set date=Fri 07/25/2008 )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set time=05:49 PM )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM Print out the program name and start time
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
    STARTED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_CP=.;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET ENV_FILE=e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=16 )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\applmgr\LOCALS~1\Temp
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Install 8i will only happen, if database is "db817"
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "db920" == "db817" goto :INSTALL_DB
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>goto :SCRIPTEND
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>(set date=Fri 07/25/2008 )
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>(set time=05:49 PM )
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>ECHO FINISHED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
    FINISHED INSTALL PHASE : 8I RDBMS : Fri 07/25/2008 05:49 PM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Database ORACLE_HOME installation succeeded"
    "Database ORACLE_HOME installation succeeded"
    e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd APPS APPS has suceeded
    Step 1 of 3
    Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
    Processing Step 2 of 3
    Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd APPS APPS
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM $Header: adrun9i.cmd 115.19 2003/07/17 00:44:06 psaddi ship $
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and overwritten.
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM If you were instructed to edit this file, or if you are not able to use the settings
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM created by AutoConfig, refer to Metalink document 165195.1 for assistance.
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set date=Fri 07/25/2008 )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set time=05:49 PM )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
    STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_CP=.;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET ENV_FILE=e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=16 )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\applmgr\LOCALS~1\Temp
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Install 9i will only happen, if database is "db920"
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "db920" == "db920" goto :INSTALL_DB
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Installing 9i RDBMS
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Setting the driver file name
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>SET DRVNAME=gdb920.drv
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM install 9i
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
    "Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java -mx512M -classpath .;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip oracle.apps.ad.autoconfig.InstantiateFile -e e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml -d D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv -pwd no_password_here -log e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd\dbInstall.log -nthreads 16 -verbose
    Please specify valid number of threads. [1-12]
    usage:
    java oracle.apps.ad.autoconfig.InstantiateFile
    -e ENV_FILE [[-d INST_DRV [-log LOGDIR -bacdir BACKDIR]] ||
    [-d INST_DRV -tmpl TEMPLATE [-log LOGDIR -bacdir BACKDIR]] ||
    [-tmpl TEMPLATE [-out OUTFILE]]] [-pwd PASSWORD] [-test] [-nthreads NUMBER]
    java oracle.apps.ad.autoconfig.InstantiateFile
    -name VAR_NAME -value VAR_VALUE [-tmpl TEMPLATE] -out OUTFILE [-pwd PASSWORD]
    java oracle.apps.ad.autoconfig.InstantiateFile ENV_FILE INST_DRV
    where:
    ENV_FILE = Applications Context file to provide replacement vars
    INST_DRV = Instantion File Driver to define templates to be instantiated
    TEMPLATE = Template to be instantiated
    LOGDIR = The log file directory (default=<APPL_TOP>/admin/<CONTEXTNAME>/log/timestamp)
    BACKDIR = The directory for backing up previous templates
    (default=<APPL_TOP>/admin/<CONTEXTNAME>/out/timestamp)
    OUTFILE = Output file
    PASSWORD = APPS password
    VAR_NAME = A variable name to be replaced
    VAR_VALUE = The value pair to VAR_NAME
    NUMBER = Number of threads to be used in the zip action. Range [1-20]
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if 1 == 0 goto :DBINSTALL_OK
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Cannot execute Install for database ORACLE_HOME"
    "Cannot execute Install for database ORACLE_HOME"
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "" == "TRUE" goto :DBINSTALL_OK
    Error - script has returned an error: 1
    Error Code received when running external process. Check log file for details.
    Running Database Install Driver for PROD instance
    Processing DriverFile = D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
    Running Instantiation Drivers for D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adridb.drv
    Invalid target file name in driver file: <s_com>\admin\out
    instantiate file:
    source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun8i.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun8i.cmd
    instantiate file:
    source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrun9i.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrun9i.cmd
    instantiate file:
    source : D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\template\adrundb.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd to C:\DOCUME~1\applmgr\LOCALS~1\Temp\templbac\adrundb.cmd
    Step 0 of 3
    Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
    Processing Step 1 of 3
    Step 1 of 3
    Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
    Processing Step 2 of 3
    Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd APPS APPS
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM $Header: adrun9i.cmd 115.19 2003/07/17 00:44:06 psaddi ship $
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM This file is automatically generated by AutoConfig. It will be read and overwritten.
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM If you were instructed to edit this file, or if you are not able to use the settings
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM created by AutoConfig, refer to Metalink document 165195.1 for assistance.
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM ###############################################################
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>REM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('DATE /T') DO (set date=%a )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set date=Fri 07/25/2008 )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>FOR /F "delims==" %a IN ('TIME /T') DO (set time=%a )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>(set time=05:49 PM )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>ECHO STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
    STARTED INSTALL PHASE : 9I RDBMS : Fri 07/25/2008 05:49 PM
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET JRE_CP=.;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET ENV_FILE=e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET PATH=D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\unzip\NT;C:\Perl\bin;D:\MKS\bin;D:\MKS\bin\x11;D:\MKS\mksnt;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;D:\VC98\Tools\WinNT;D:\VC98\MSDev98\Bin;D:\VC98\Tools;D:\VC98\bin
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>SET EC=ERRORCODE
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>IF "5" == "1" (SET THREADS=1 ) ELSE (SET THREADS=16 )
    D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz>CD /D C:\DOCUME~1\applmgr\LOCALS~1\Temp
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Install 9i will only happen, if database is "db920"
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "db920" == "db920" goto :INSTALL_DB
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Installing 9i RDBMS
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM Setting the driver file name
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>SET DRVNAME=gdb920.drv
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM install 9i
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>REM
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
    "Statusstring Installing 9i - D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv"
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\bin\java -mx512M -classpath .;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\RapidWiz.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\rt.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jre\NT\1.3.1\lib\i18n.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\ewt-3_4_9.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\swingall-1_1_1.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\share-1_1_11.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\jnls.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\acc.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\help-3_1_8.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\oracle_ice-4_06_6.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\netcfg.jar;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\xmlparserv2.zip;D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\jlib\adconfig.zip oracle.apps.ad.autoconfig.InstantiateFile -e e:\oracle\proddb\9.2.0\appsutil\PROD_sysd.xml -d D:\Stage_area_11.5.9\startCD\Disk1\rapidwiz\driver\db\driver\gdb920.drv -pwd no_password_here -log e:\oracle\proddb\9.2.0\appsutil\log\PROD_sysd\dbInstall.log -nthreads 16 -verbose
    Please specify valid number of threads. [1-12]
    usage:
    java oracle.apps.ad.autoconfig.InstantiateFile
    -e ENV_FILE [[-d INST_DRV [-log LOGDIR -bacdir BACKDIR]] ||
    [-d INST_DRV -tmpl TEMPLATE [-log LOGDIR -bacdir BACKDIR]] ||
    [-tmpl TEMPLATE [-out OUTFILE]]] [-pwd PASSWORD] [-test] [-nthreads NUMBER]
    java oracle.apps.ad.autoconfig.InstantiateFile
    -name VAR_NAME -value VAR_VALUE [-tmpl TEMPLATE] -out OUTFILE [-pwd PASSWORD]
    java oracle.apps.ad.autoconfig.InstantiateFile ENV_FILE INST_DRV
    where:
    ENV_FILE = Applications Context file to provide replacement vars
    INST_DRV = Instantion File Driver to define templates to be instantiated
    TEMPLATE = Template to be instantiated
    LOGDIR = The log file directory (default=<APPL_TOP>/admin/<CONTEXTNAME>/log/timestamp)
    BACKDIR = The directory for backing up previous templates
    (default=<APPL_TOP>/admin/<CONTEXTNAME>/out/timestamp)
    OUTFILE = Output file
    PASSWORD = APPS password
    VAR_NAME = A variable name to be replaced
    VAR_VALUE = The value pair to VAR_NAME
    NUMBER = Number of threads to be used in the zip action. Range [1-20]
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if 1 == 0 goto :DBINSTALL_OK
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Cannot execute Install for database ORACLE_HOME"
    "Cannot execute Install for database ORACLE_HOME"
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "" == "TRUE" goto :DBINSTALL_OK
    Error - script has returned an error: 1
    Error Code received when running external process. Check log file for details.
    Running Database Install Driver for PROD instance
    Please guide.

    Hi,
    Thank you for reply, i have changed the stage directory name but error is this one appearing, you can check above log file.
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if 1 == 0 goto :DBINSTALL_OK
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>echo "Cannot execute Install for database ORACLE_HOME"
    "Cannot execute Install for database ORACLE_HOME"
    C:\DOCUME~1\applmgr\LOCALS~1\Temp>if "" == "TRUE" goto :DBINSTALL_OK
    Error - script has returned an error: 1
    Error Code received when running external process. Check log file for details.
    Running Database Install Driver for PROD instance
    Processing DriverFile = D:\Stage11\startCD\Disk1\rapidwiz\template\adridb.drv
    Running Instantiation Drivers for D:\Stage11\startCD\Disk1\rapidwiz\template\adridb.drv
    Invalid target file name in driver file: <s_com>\admin\out
    instantiate file:
    source : D:\Stage11\startCD\Disk1\rapidwiz\template\adrun8i.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd to C:\Documents and Settings\applmgr\My Documents\templbac\adrun8i.cmd
    instantiate file:
    source : D:\Stage11\startCD\Disk1\rapidwiz\template\adrun9i.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd to C:\Documents and Settings\applmgr\My Documents\templbac\adrun9i.cmd
    instantiate file:
    source : D:\Stage11\startCD\Disk1\rapidwiz\template\adrundb.cmd
    dest : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd
    backup : e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrundb.cmd to C:\Documents and Settings\applmgr\My Documents\templbac\adrundb.cmd
    Step 0 of 3
    Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun8i.cmd
    Processing Step 1 of 3
    Step 1 of 3
    Command: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd
    Processing Step 2 of 3
    Executing: e:\oracle\proddb\9.2.0\temp\PROD_sysd\adrun9i.cmd APPS APPS
    ------------------------------------------

  • Quicktime 7 Pro is not installing over Quicktime 7

    I have Quicktime 7.7.6 for Windows installed on my computer.
    I purchased Quicktime 7 Pro and received a registration number
    I entered the registration number according to instructions
    Quicktime 7 Pro did not install over Quicktime 7.
    Help!

    Entering the registration merely unlocks the Pro features of QuickTime Player 7. It doesn't replace it with a different version.

Maybe you are looking for

  • Exchange Email: Days to Sync

    What does the "Days to Sync" feature do on the iPhone? I understand that it tells it how many days of email to sync up, but what are the advantages/disadvantages to having it set as "no limit?" Is there a way to get it to display only x amount of mes

  • Audigy 2 ZS Platnum Pro Multitrack recording probl

    I hope I am in the right forum. This one looks pretty close. I have the Audigy 2ZS Platnum Pro in a brand new Compaq Prisario w/AMD (64) CPU running Windows XP w/52 megs of RAM. I bought this card new a couple of years ago and got frustrated trying t

  • Message diplay as iphone is disabled connet to itunes...help

    I can't use the phone....

  • Can we have a choice list (lookup) while editing a report.

    I have created a report and it has one editable field. BAM shows an input field which user can update but to avoid typing mistakes we want to make it choice list. Can I do it? Source data for choice list is fixed for time being but I would like to kn

  • Coding sms

    could you tell me Difference in coding Serbian(ŠĐČĆŽ) and English(SDCZ) in English, in sms, Unit of payment is 160 characters, and on Serbian is 70 characters!!!!!!!!!! Why?????? coding Englis and Serbian is same Ž is 000010100000 000001000000 001111