Quicktime Active content

Does anybody know how to get rid of the box that makes you press the key board or hit enter to view the video. They play properly, it is the active content on ie.
I know how to fix this with flash but not with QT
thanks

Opps...last link was wrong.
This one does work but it had to be manually editing from an
embedded QT
format which is designed to add a separate audio track via an
mp3. But DW
did not automatically detect it as needed "repairing" and if
I manually
click on the convert button it causes it to fail.
http://www.buddhapada.com/tests/qt-active-content-manual-edit.htm

Similar Messages

Pop-Up Menus and active content errors - Help!

I'm attempting to add pop-up menus to my navigation bar, to
make my site more user-friendly, but to no avail:
I've tried designing pop-up menus in Fireworks, then
importing the html code in, but that gives me errors when I try to
insert the bar. Then, I tried putting my menus in different layers,
with a "show layer" behavior on the button, and a "hide layer"
behavior attached to the roll-off of the layer, but my version of
Dreamweaver won't attach a behavior to a layer.
Then, I noticed the tech-note on this site for the fix to use
pop-ups in a template, so I added pop-up menus directly to my
navigational buttons using the wizard. So here's where my problem
comes in. . .
When I preview my page, it throws up an active content error,
but will still run. I uploaded it to my remote server, but when I
went to the url, no action takes place when I put my cursor over
it. Anybody have any ideas on how to create a pop-up menu that
won't throw up an active content error? I've seen them on plenty of
websites before, but can't figure how to do them.
Any light you could shed would be greatly appreciated!

> I'm attempting to add pop-up menus to my navigation bar,
to make my site
> more
> user-friendly, but to no avail:
Sometimes, they make your site less user-friendly. So be
careful.
The DW/FW pop-up menus are usually something that should be
avoided. They
are very poorly thought out and implemented, and will likely
cause you
continuing problems. It's foolish to devote the time to them
that could be
more effectively be placed elsewhere, especially since there
are better
options that work right out of the box, so to speak. Please
check the free
and commercial options here -
http://www.projectseven.com/.
> Any light you could shed would be greatly appreciated!
Don't use DW/FW pop-up menus.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Ally86" <[email protected]> wrote in
message
news:[email protected]...
> I'm attempting to add pop-up menus to my navigation bar,
to make my site
> more
> user-friendly, but to no avail:
>
> I've tried designing pop-up menus in Fireworks, then
importing the html
> code
> in, but that gives me errors when I try to insert the
bar. Then, I tried
> putting my menus in different layers, with a "show
layer" behavior on the
> button, and a "hide layer" behavior attached to the
roll-off of the layer,
> but
> my version of Dreamweaver won't attach a behavior to a
layer.
>
> Then, I noticed the tech-note on this site for the fix
to use pop-ups in a
> template, so I added pop-up menus directly to my
navigational buttons
> using the
> wizard. So here's where my problem comes in. . .
>
> When I preview my page, it throws up an active content
error, but will
> still
> run. I uploaded it to my remote server, but when I went
to the url, no
> action
> takes place when I put my cursor over it. Anybody have
any ideas on how
> to
> create a pop-up menu that won't throw up an active
content error? I've
> seen
> them on plenty of websites before, but can't figure how
to do them.
>
> Any light you could shed would be greatly appreciated!
>

Active Content warning with web player

We have a client who is using our web packaged program from a
CD and they are getting Active Content warnings and they do not
like it. Is there a way to set the active content to run when start
the CD without using the registry? They said something about doing
it through discretionary access control list (DACL) files.

I've never heard of DACLs but I think the 'Mark of the Web'
will satisfy
your need? Search it and see...
Erik
dparrott wrote:
> We have a client who is using our web packaged program
from a CD and they are
> getting Active Content warnings and they do not like it.
Is there a way to set
> the active content to run when start the CD without
using the registry? They
> said something about doing it through discretionary
access control list (DACL)
> files.
>
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.adobe.com/communities/experts/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/group/macromedia.authorware

Active Content when RH topic contains Captivate movies

I use Robohelp to display my captivate movies (published as
FLASH).....since the Active Content issue in the latest IE update,
my users now have to click on the movie before it becomes
interactive.....I've managed to fix the topics in RH that don't
have a movie inserted on them....but if there's a movie, my fix
doesn't work unless I modify EACH htm file (each topic's code).
This works great except that EVERY time I re-compile the RH
project, the fix is overwritten.....
My fix involves a javascript include file......
Thanks.
Pam

Hi again Pam
Hmmm, well I'll see if I can help any. I'm not sure what you
mean with "fixing topics in RH that don't have a movie inserted".
What are you fixing? Why is a fix needed if a movie isn't there?
But on to the actual issue at hand. You are saying that
something is being overwritten? Perhaps it will help to outline the
process as I envision it.
1. You have a topic containing a Captivate movie that is
interactive, meaning the user must click or type somewhere to
interact with it.
2. Before the fix is applied, the user must click or press
the spacebar in order to "activate" the control. This is equivalent
to patting Internet Explorer on the head and saying "It's okay.
Really. The world will, in fact, NOT end if you just show me the
content and allow me to click it."
3. You apply the fix, which means to use an external
JavaScript file (.JS file) to perform a "write in" of the code
needed to present the movie.
4. You generate WebHelp (assuming WebHelp here, as I do not
believe this issue manifests from inside a compiled .CHM file) and
something gets overwritten?
And here is the quandry. I'm assuming you are intent on
asking either how to prevent the overwriting from occurring, or
possibly WHY it's being overwritten. Perhaps both?
I think the first step is to determine if the WebHelp
generation process is actually overwriting files. I'd compare the
HTML code of a topic that works fine prior to genning WebHelp, with
the same topic code after the generation process has occurred. What
has changed with respect to the code you inserted? Is the code just
gone? Or is it possibly an issue whereby the .JS file simply hasn't
survived the WebHelp generation process? I'm guessing the latter.
You may simply need to add the .JS file to baggage.
Cheers... Rick

"Apply Active Content Update" message ONLY in Firefox

Here's my new website:
www.ClampTools.com
When I view it in IE it looks great. When I view it in
Firefox (like for the Press link) I get this error:
This page requires AC_RunActiveContent.js. In Flash run
"Apply Active Content Update" in the Commands menu to copy
AC_RunActiveContent.js to the HTML output folder.
I already did all of this and yes the js file is there, in
the same directory. Any ideas why this isn't working?
Thanks!

FIREFOX FIX FOR VS.NET 2005 USERS:
This issue happens when using Visual Studio 2005 as the
editor.
I copied the <HEAD> portion of a page that worked and
pasted it in the bad page. When saving the file in the VS editor it
gives me this message:
Some Unicode characters in this file could not be saved in
the current
codepage. Do you want to resave this file as Unicode in order
to maintain
your data? Yes, No, Save With Other Encoding or Cancel
I selected NO and everything is fine.

"Convert Active Content" problem

Recently, I opened an html page in DW8, and a dialogue box
appeared called "Convert Active Content". It said "This page
contains <object> tags that may not work properly in the most
recent versions of Internet Explorer. To correct this problem, you
can convert these tags to browser-safe scripts. Do you want
Dreamweaver to convert these tags for you?" So, being the trusting
soul that I am, I clicked "yes." But when I uploaded my page, I
could not see the Flash videos that I had put in this page. The
same thing happened with another page. So I created new pages, and
clicked on "no" when the "Convert Active Content" dialogue box
appeared, and my Flash videos appear again.
I really would like to avoid the annoying double-clicking
that has to happen with the new IE browser whenever I include Flash
content, but this work-around does not work. Any ideas?
Thanks.

You were right to say you wanted DW to "convert these tags to
browser-safe
scripts." What you didn't do was upload the SCRIPTS directory
that DW
created. Try doing that and all should be well.
Mad Dog
vh2 wrote:
> Recently, I opened an html page in DW8, and a dialogue
box appeared
> called "Convert Active Content". It said "This page
contains
> <object> tags that may not work properly in the
most recent versions
> of Internet Explorer. To correct this problem, you can
convert these
> tags to browser-safe scripts. Do you want Dreamweaver to
convert
> these tags for you?" So, being the trusting soul that I
am, I
> clicked "yes." But when I uploaded my page, I could not
see the
> Flash videos that I had put in this page. The same thing
happened
> with another page. So I created new pages, and clicked
on "no" when
> the "Convert Active Content" dialogue box appeared, and
my Flash
> videos appear again.
>
> I really would like to avoid the annoying
double-clicking that has to
> happen with the new IE browser whenever I include Flash
content, but
> this work-around does not work. Any ideas? Thanks.

Convert to active content

I get a AC_RunActiveContnet.js warning when I try to run an
online Flash file. It was my understanding that Dreamweaver was
supposed to convert files to active content, or at least give you
and option. I have Dreamweaver CS3. It is not converting to the
AC_RunActiveContent.js file. Do I need an update? If so how do I
get it. I could not find it for Dreamweaver CS3/Flash9.
Thanks

When you insert a flash file in DW, it creates a Scripts
folder in your site
for you. Inside that Scripts folder, you will find the
AC_RunActiveContent.js file. Upload the Scripts folder to
server. That
should take care of your problem.
--Nancy O.
Alt-Web Design & Publishing
www.alt-web.com
"SuJun" <[email protected]> wrote in message
news:ffl0a5$se3$[email protected]..
> I get a AC_RunActiveContnet.js warning when I try to run
an online Flash
file.
> It was my understanding that Dreamweaver was supposed to
convert files to
> active content, or at least give you and option. I have
Dreamweaver CS3.
It
> is not converting to the AC_RunActiveContent.js file. Do
I need an
update? If
> so how do I get it. I could not find it for Dreamweaver
CS3/Flash9.
>
> Thanks
>

Active content updater not working

hello, i am having alot of trouble getting the active content
updater for my flash to work, i have followed all directions and i
still have to click to activate the content? i am using Flash 8
professional. Any help please?

Hi,
For active dataguard;
1 - alter database open read only;
2 - alter database recover managed standby database using current logfile disconnect;
Did you forget the first step?

Active Content Update Issue

I hope someone can help me! Here is the deal, I want to make
a button that will open a blank page with a PDF document. I can get
it to work with GETurl, but I cannot figure out how to apply active
content update to the new page. It works fine on a Mac, but on a PC
when the new window opens I get the warning messages and have to
click the top bar and say "allow content etc.". Does anyone know
what code I can use to tell the new html page to apply the active
content update? Or can anyone tell me a better way to achive the
same thing.
Thanks

qdog111711 wrote:
> My client is complaining that several of his potential
clients are unable to
> see video on the website and the site itself runs
sluggish. I thought that
> maybe this issue relates to the "Active Content Update"
that Microsoft released
> several months ago for Internet Explorer. Does anyone
know what the issue may
> be or have had any similar experiences?
Active Content has nothing to do with performance of the
movie.
It is in regard to licensing of the player technology -
nothing else.
Perhaps the clients do not have the latest player and low in
resources
machines ? Your movie seem overly big for what it does.
Probably reducing
quality of images and sound w/o losing much of an actual
quality could cut
the file down at least to 1MB, help the playback a bit.
It could be real drainage for older machines.
The video works for me just fine so my guess is they simply
do not have
compatible player.
Best Regards
Urami
!!!!!!! Merry Christmas !!!!!!!
Happy New Year
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>

Active Content - Flash - fix for Contribute Users

Greetings,
I have a group of users that use Contribute. Many of these
users create Flash Paper forms and embed them in a standard
template. These individuals do not work with HTML or JavaScript.
Recently a security patch for IE has been applied to the
organization. This patch includes the IE Run Active Content patch.
Now, when Contribute users apply Active Content and post their
pages they get the "Click to activate this content" message and a
bounding box around the Flash Paper content.
Right now I know there are two work-arounds that fix this
problem, unfortunately it requires someone usingJavascript and
Dreamweaver (or hand coding) rather than Contribute. As Contribute
users they do not have the rights to modify parts of the template.
Unfortunately that part of the template is where work-around
javascript would be placed.
Is there a way for content providers to apply the fix rather
than having a Dreamweaver Admin apply a fix? Is there a javascript
modification that changes one of the two work arounds
(AC_RunActiveContent.js and swfobject.js). These folks are not
posting to an IIS server. They are using standard HTML templates.
Thank you,
TPK

> Greetings,
>
> I have a group of users that use Contribute. Many of
these users
> create Flash Paper forms and embed them in a standard
template. These
> individuals do not work with HTML or JavaScript.
Recently a security
> patch for IE has been applied to the organization. This
patch includes
> the IE Run Active Content patch. Now, when Contribute
users apply
> Active Content and post their pages they get the "Click
to activate
> this content" message and a bounding box around the
Flash Paper
> content.
>
> Right now I know there are two work-arounds that fix
this problem,
> unfortunately it requires someone usingJavascript and
Dreamweaver (or
> hand coding) rather than Contribute. As Contribute users
they do not
> have the rights to modify parts of the template.
Unfortunately that
> part of the template is where work-around javascript
would be placed.
>
> Is there a way for content providers to apply the fix
rather than
> having a Dreamweaver Admin apply a fix? Is there a
javascript
> modification that changes one of the two work arounds
> (AC_RunActiveContent.js and swfobject.js). These folks
are not posting
> to an IIS server. They are using standard HTML
templates.
>
> Thank you,
>
> TPK
>
Hi,
This should get fixed with the new release of Contribute...
-Avinash

IE Active Content + Dynamically Loaded Swfs...any help?

Hi,
I've recently become aware of the whole IE active content
problem and I followed the tutorial at
http://activecontent.blogspot.com/
to adjust my html files accordingly. However I have one site
located at:
http://www.mrdodson.com/SavannahSucks/SavannahSucks.html
which loads several swfs dynamically. However in IE none of the
swfs will start loading until you click on one of the markers
which, unfortunately locks the user into a zoomed in view with no
way of exiting until the external file finishes loading. Can anyone
provide any suggestion on how I can get around this? Should I load
the clips in a different fashion or can it be resolved by adding
something to the HTML? I'm a recent grad trying to finish up my
portfolio and this is really holding me back. Many thanks for any
suggestions.
-Rob

please if anyone knows anything i would really appreciate it.
i can't send my portfolio out until i fix this one thing so pretty
much my life is on hold until i can resolve this.

Active content update for dw8

Hi guys, I've just installed the active content updater found
at
http://www.adobe.com/support/dreamweaver/downloads_updaters.html#dw8
and reopened my html files that contain flash and agreed to the
prompt. I then saved changes and uploaded the files to my ftp but
the flash content seems to have disappeared in the html file
comlpetely! An example of one of the pages is here:
http://www.cambridgestainedglass.co.uk
where it should contain this flash movie:
http://www.cambridgestainedglass.co.uk/flash/home.swf
. this is really annoying does anyone have any ideas why. I have
updated another site I have done and that worked fine. Please help.
Thanks

Upload the NEW Scripts folder that DW8.0.2 now places in the
root of your
site.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Stefan83" <[email protected]> wrote in
message
news:fcggvv$fla$[email protected]..
> Hi guys, I've just installed the active content updater
found at
>
http://www.adobe.com/support/dreamweaver/downloads_updaters.html#dw8
and
> reopened my html files that contain flash and agreed to
the prompt. I
> then
> saved changes and uploaded the files to my ftp but the
flash content seems
> to
> have disappeared in the html file comlpetely! An example
of one of the
> pages is
> here:
http://www.cambridgestainedglass.co.uk
where it should contain this
> flash
> movie:
http://www.cambridgestainedglass.co.uk/flash/home.swf
. this is
> really
> annoying does anyone have any ideas why. I have updated
another site I
> have
> done and that worked fine. Please help. Thanks
>

Workaround for IE active content problem?

Adobe
posted
a workaround for existing web pages to respond to the change in
IE that requires users to manually activate Flash content. I tried
doing the same document.write in an external file for the HTML
files FlashHelp generates wherever I found the <object> and
<embed> tags, but I get a script error ("Object expected") in
the lines where I call the function. (The solution worked for me in
simple HTML pages with Captivate movies, so I know it can work.)
The only reason I can think of that it won't work is that the
scripts are concatenating strings, not just showing a movie where
the <object> and <embed> tags are. Has anyone found a
workaround for FlashHelp so users don't have to manually activate
the top and left panes? I put in a "wish" for Adobe to provide a
solution on the site and later in an update or new version of
RoboHelp (which is another issue in and of itself), but who knows
when the developers will be able to come up with it. Thanks!

Thanks for asking, Mimi. Here are more specific steps:
1. Open Notepad or another program for creating text files.
2. Create two functions. For example:
function insertMaster1() {
function insertMaster2() {
You can call your functions anything you want, but the names
must be different. Note that for the moment, they're empty, but
we'll change that in a minute.
3. Save the Notepad file with a JS file extension (for
example, runactive.js). In Notepad, specify “All Files”
for “Save as type” so that it doesn’t save as a
TXT.
4. When you generate your FlashHelp system, it creates a
bunch of HTM files containing JavaScript in the destination folder
you specified when generating your output. Locate wf_master.htm and
wf_navpane.htm in the output folder. (If you leave RoboHelp to use
its defaults, it puts your help system in an !SSL!/FlashHelp
directory within your project folder.)
5. Open wf_master.htm.
6. In the <head> tags, insert a line that references
your JS file:
<script language=“JavaScript”
src=“runactive.js”></script>
7. Find the lines in the code that look like this:
// Insert the “Master” SWF
8. Highlight everything AFTER this commented-out block until
the </script> tag. The last thing you highlight should be
"document.write(strObject);".
9. Cut the highlighted code and paste it into the first
function in your JS file so it looks like this:
function insertMaster1() {
// Build up the variable string we will be sending
strFlashVars = "uniqueHelpID=" + parent.UniqueID();
……(more code)
document.write(strObject);
10. In the place where you just cut all that code out of
wf_master.htm, insert a call to the function:
insertMaster1();
That’s all you need because all that code you just
moved was already in <script> tags in the HTM file. The
</script> tag should come immediately after this function
call.
11. Open wf_navpane.htm.
12. Repeat steps 6 – 10 for wf_navpane.htm. The code
we’re concerned with in this file looks almost exactly like
that in wf_master.htm, but there are a few lines less this time.
Put the code you take out of wf_navpane.htm into the second
function in your JS file. Where you cut out the code from
wf_navpane.htm, put a call to the second function (it should come
right before the end of the <script> tags):
insertMaster2();
13. Save your JS file and the two HTM files.
14. Whenever you re-generate your output, RoboHelp is going
to erase your new versions of these HTM files and create its own
again. Copy your new versions of wf_master.htm and wf_navpane.htm
to another location (can be a folder within your output folder).
Now you have them so you can paste them back over RoboHelp’s
versions each time you finish generating your output. For example,
I would stow my wf_master.htm and wf_navpane.htm in a folder called
"drop files." Then, after I get done generating my output, I copy
those files and paste them in the output folder, letting them save
over the ones that RoboHelp created.
15. To test it once you've finished the swap, find the HTM
file in your output folder that is named after your project. For
example, if my project is called flying_monkey, I would find
flying_monkey.htm. Open this HTM file in Internet Explorer, and you
shouldn’t have any messages telling you that you have to
press Enter or Spacebar or click on the panes to activate them.
This runs from the same basic idea as Adobe’s
workarounds for Flash—we’re going to a file external to
the HTM files for the active content tags. Hope you find this
useful! Let me know if you run into any problems.
--Ben

IFRAME and The code to fix the IE active content behavior

I'm using the Macromedia Extension for fix the IE April 11
Upgrade. It's all right, but the iframes doesn't work with thenew
code, Do you know some solution???? HELP!!!
Thanks

<sigh>
Upload the Scripts folder that the fix places in your Local
root folder.
This is asked and answered about 10 times a day here.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"_adrian" <adrian @ test.com> wrote in message
news:ej5a1j$rc9$[email protected]..
> So I have version 7 SWF on a page, and DW8 wants to
apply its "IE Active
> Content block fix" to the page, after which time, the
SWF no longer shows
> up. The page just sits there bank. There had been a
posting here months
> ago about a cgc.js fix, but I can't find the details on
that now...
>
> Has anyone else run into this? How should we handle it?
Thanks
>

Getting Message "Convert Active Content"

All,
After my last post with problems displaying my youtube video in IE, now am getting a message in DW when I open
the project "Convert Active Content" This page contains <object> tags that may not work properly in some versions
of IE, do you want DW to convert yes or no"
I have been saying no....if that is correct how do you get the message to not appear again? thanks...dano

Remove the active content and re-insert it, and be sure to
upload the
Scripts folder to your server.
HTH
"SwiftMed" <[email protected]> wrote in
message
news:fegd0d$bik$[email protected]..
> Hey Guys,
>
> when opening a website file in dreamweaver cs3 (just one
particular file),
> i
> am being presented with the following message, could
anybody shed light
> onto
> whats happening please?
>
> this page contains <object> tags which will not
work properly in the most
> recent versions of internet explorer, dreamweaver cannot
convert these
> <objects> tags.
>
> any advice would be appreciated.
>

Quicktime Active content

Similar Messages

Maybe you are looking for