Quicktime and iTunes 6 problems...Urgent Help! Please!
I have recieved an iPod for christmas, for use on my laptop which currently uses iTunes 6. I would like to be able to burn some tracks onto a disc, but a CD-Burner for the laptop is not availiable. My Family Computer however, does have a CD-Burner, so I thought I would be able to burn the tracks from here. I installed the version of iTunes supplied with the iPod and connected the ipod to the computer. I attempted to play some purchased music, in order to add it to my library and was told it was not authorised to play in the computer. I attemtpted to authorise it and it then told me that I needed to install iTunes 6. I did so, and half way through the download, it stopped and told me their was an error with the Quick time download (Error : - 3). I attemtpted to use iTunes after the installation finished and it told me that I could not use it becuase it require a certain version of Quicktime. I then attempted to dwnload the version of Quicktime, without iTunes. There was an error (1402). After tis there was another error (-1603). It then told me Quicktime could not complete its installation...Could anyone direct in the right direction to being able to have iTunes 6 and burn tracks from my iPod? Help would be MUCH appreciated...
I am using Windows XP Service Pack 2...
hiya!
I then attempted to dwnload the version of Quicktime, without iTunes. There was an error (1402).
hmmm. that's the underlying problem that is causing the -3 on the itunes install.
let's try applying the following treatments:
Error 1406 or 1402 appears when you install iTunes or QuickTime for Windows
... and if you end up trying the regedit, let's take a few additional precautions on the standalone QT 7.0.3 reinstall after that.
reboot the PC first. then download and save a copy of the QT 7.0.3 installer to your hard drive. (we'll run the install from there rather than online.) switch off any antivirus and antispyware applications prior to the install.
Quicktime 7.0.3 Standalone Installer
keep us posted.
love, b
Similar Messages
-
Quicktime and iTunes 6 problems...Urgent Help!
I have recieved an iPod for christmas, for use on my laptop which currently uses iTunes 6. I would like to be able to burn some tracks onto a disc, but a CD-Burner for the laptop is not availiable. My Family Computer however, does have a CD-Burner, so I thought I would be able to burn the tracks from here. I installed the version of iTunes supplied with the iPod and connected the ipod to the computer. I attempted to play some purchased music, in order to add it to my library and was told it was not authorised to play in the computer. I attemtpted to authorise it and it then told me that I needed to install iTunes 6. I did so, and half way through the download, it stopped and told me their was an error with the Quick time download (Error : - 3). I attemtpted to use iTunes after the installation finished and it told me that I could not use it becuase it require a certain version of Quicktime. I then attempted to dwnload the version of Quicktime, without iTunes. There was an error (1402). After tis there was another error (-1603). It then told me Quicktime could not complete its installation...Could anyone direct in the right direction to being able to have iTunes 6 and burn tracks from my iPod? Help would be MUCH appreciated...
See if this article helps
http://docs.info.apple.com/article.html?artnum=93865
Also, the installing and upgrading forums will have more answers to this type of question.
http://discussions.apple.com/forum.jspa?forumID=792&start=0
Good luck! -
an absolute night mare i can't download itunes, keep getting itune msi message my son wants his ipod working. i cant find the file anywher on my comp as i previously had it it won't let me uninstall or reinstall
What did iTunes Support say when you contacted them ? If it's been more than 48 hours since you contacted them and you haven't had a reply then contact them again.
If you haven't yet contacted them, then to do so :
- go to http://www.apple.com/support/itunes/ww
- click on your country's flag
- click on the Contact Support at the bottom of the left-hand column
- click on Contact iTunes Store Support on the right-hand side of the page
- then Purchases, Billing & Redemption -
IMessage and FaceTime not working, Urgent Help please!!!
Hi guys,
Need help urgently, my iMessage and FaceTime are both not working on my Macbook Pro.
The iMessage gives giving this message "Could not sign in. Please check your network connection and try again.", while FaceTime just simply cannot login.
Please help!!!This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Sign out of iMessage and FaceTime on all your Apple devices. Log out and log back in. Try again to sign in.
Step 3
Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
Step 4
From the menu bar, select
▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 5
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 6
From the menu bar, select
▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 7
Select from the menu bar
▹ System Preferences… ▹ Flash Player ▹ Storage
and click
Block all sites from storing information on this computer
Close the preference pane.
Step 8
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
Step 9
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 10
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound outputand Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
Step 11
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/com.apple.apsd.plist
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 12
Reset the NVRAM.
Step 13
Reset the System Management Controller (SMC).
Step 14
Reinstall OS X.
Step 15
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support. When you set up a support call, select "Apple ID" as the product you need help with, not the hardware model. That way, if you're not under AppleCare, you may be able to talk your way out of being charged for the call. -
Ajax problem urgently help please?
Hi all,
Can you tell me that is it possible using for when we selected a data from a select list to show the selected item results in a multiselect list.I tried but did not success.For example we select a dept name from a select list and in the multiselect list we will show the empnames for this deptno but more than ona rows.can you tell me how can ı success this?
ı am waiting your helps!Hi,
You can replace a select list's item by doing something like the following in javascript:
function fillState(country)
var statelist = document.getElementById("StateList");
statelist.length=0;
var opt = new Option;
var statenames = getStateNames(country);
var optioncount = 0;
var isSelected = false;
for (var n = 0; n < statenames.length; n++)
opt = new Option;
opt.value = statenames[n][0];
opt.text = statenames[n][1];
statelist.options[optioncount] = opt;
optioncount++;
Without knowing more about the data you get back, I couldn't tell you how to adjust the above to suit your needs.
In this example, I have an array populated with state codes and names which I then loop through to add into the select list. The "statelist.length=0" line at the beginning clears out any previous data.
Hopefully this should give you an idea of what's needed.
Regards
Andy -
SQL problem URGENT help PLEASE
SQL> select period_number, sum(gross_amt)
2 from mpy_payslip_headers
3 where payroll_year = 2001
4 and business_group_id = 'E4'
5 and employee_number = '366'
6 and period_number between 12 and 13
7 group_by period_number;
group_by period_number
ERROR at line 7:
ORA-00933: SQL command not properly ended
WHY THIS ERROR? As far as I know it is possible.
Thanks in advance,
MarijaSometimes, the most obvious things are the harder to see...
The correct is 'order by', not 'order_by'! -
After updating to iOS 8.0.2 the App Store and iTunes have disappeared, is anyone else having this problem? Help please!
Well, if they have truly disappeared then something is really messed up. For really messed up stuff, you need to set it to factory default condition, and then afterwards, restore it from your backup.
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414 -
I have the new iOS 6 on my iPad, and when ever I try to log on to the iTunes store this comes up: Cannot connect to the iTunes store. Anybody help please?
I'm also having this problem I've already tried changing the year stuff and its still the same I succeeded once when I toggled my credit card account but after that the same problem occurred.
-
Cannot restore my brand new iphone 4s ,got stuck in DFU mode and itunes shows error code (-1) please help?
repeatedly tried from diffierent computers and the same error code pops up (error -1)That's a hardware problem which will require a trip to the Apple store for evaluation, unless your phone has been jailbroken, then it's a corrupt hosts file (and we can't help you with that here as it is against the forum's terms of use).
-
b font color ='red' Java JDBC and Oracle DB URGENT HELP PLEASE /font /b
Hello, I am a newbie. I'm very interested in Java in relation to JDBC, Oracle and SAP.I am trying to connect to an Oracle DB and I have problems to display the output on the consule in my application. What am I doing wrong here . Please help me. This is my code: Please Explain
import java.sql.*;
import java.sql.DriverManager;
import java.sql.Connection;
public class SqlConnection {
public static void main(String[] args) {
Class.forName("oracle.jdbc.driver.OracleDriver"); //Loading the Oracle Driver.
Connection con = DriverManager.getConnection
("jdbc:orcle:thin:@34.218.5.3:1521:ruka","data","data"); //making the connection.
Statement stmt = con.createStatement ();// Sending a query to the database
ResultSet rs = stmt.executeQuery("SELECT man,jean,test,kok FROM sa_kostl");
while (rs.next()) {
String man = rs.getString("1");
String jean = rs.getString("2");
String test = rs.getString("3");
String kok = rs.getString("4");
System.out.println( man, jean, test,kok );//here where my the
//compiler gives me errors
stmt.close();
con.close();
}<b><font color ='red'>Java JDBC and Oracle DB URGENT HELP PLEASE</font></b>Too bad your attempt at getting your subject to have greater attention failed :p
-
Urgent help please, I made an file with the size 1024x768, then i made two folios, one for retina 2048x1536 and one for non retina 1024x768, i have alot of video content in it, everything works perfect on my retina ipad, but when i open it on ipad 2 an error appears on the pages with video content?
its in german:
der Vorgang könnte nicht abgeschlossen werden.
something like the process coundnt be completed -
I have downloaded iCloud control panel but when I sign in with my iTunes username and password it say they are valid but I don’t have an iCloud account and Iam lost can you help please.
JohnYou are getting this message because you are trying to create an iCloud account on a PC. You can only create iCloud account on an iOS device (iPhone, iPad or iPod Touch) running iOS 5 or higher, or on a Mac running OS X Lion (10.7.5) or higher. After creating your account on one of these devices you will then be able to sign into the account using this ID on your PC.
-
Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?
Ron Bell
[email protected]Mozilla, like many other software companies, thoroughly test their software before releasing it to the public and I'm sure that no problem you are having is intentional.
I do not work for Mozilla but I do have experience of releasing software for public usage.
Firefox has no way of knowing what other software is already on your computer and with millions of combinations it isn't always possible to test for every scenario.
You can go back to the old version of Firefox but that won't always solve your problem.
The web site below tells you how:
https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox -
Just bought Elements 13. Input serial number (starting 1057), which is not recognised and the installation stalls here. Urgent help please...
Maryrhire910 I am sorry that you are facing difficulty downloading and installing Photoshop Elements 12. Are you downloading the installation files from Download Photoshop Elements products | 13, 12, 11, 10? If so what specific error are you receiving?
-
Get three quarters of the way through recovery mode and then iphone goes back to "Connect to Itunes screen" can someone help please?
Delete the .ipsw file on the computer.
Put the device in DFU mode.
Restore as new, once the restore completes, then try restoring from backup.
Maybe you are looking for
-
MDX Parser: Error during allocate
Hi, I'm trying to create some WebI reports over BW Queries, but when I try to refresh the WebI document, it throws an error that more less says "timeout during allocate / CPIC-CALL: ThSAPCMRV", I know that Note 1032461 is related, but unfortunately I
-
MacBook Pro won't allow website to use camera
Hey fellows. So, I've been trying to use a few different websites, the likes of www.6rounds.com and www.stickam.com, that allow you to video chat with people. Whenever I try to make sure my camera is working, though, it refuses to acknowledge it. I h
-
How do I tag people in PSE 11?
How do I tag people in PSE 11?
-
About glyph template in Illustrator
When I created glyph template in Illustrator and added it to Adobe SING Glyphlet Manager, I can find the created glyph at Indesign glyph panel. There's also glyph panel in Illustrator CS4 software, but the created glyph can not be displayed in CS4, i
-
My camera doesn't work + it doesn't recognize external cameras. what's the problem here?
I set up a new windows 7 version for my laptop (probook 4510s) & the camera doesn't work + it doesn't recognize any external camera. So how to fix my camera & get it back to work?