QuickTime and NVIDIA
Everyone having problems with choppy QuickTime video on computers running Vista with NVIDIA motherboards needs to view the following link and then ask Apple and NVIDIA to work together to fix this problem. I see this same problem posted on this discussion every day, but neither Apple nor NVIDIA seem to be doing anything about it.
http://www.istartedsomething.com/20070712/quicktime-bug-nvidia-sata-vista/
Apple and NVIDIA, please fix this!
NVIDIA finally fixed this problem with updated SATA drivers. Windows Update installed version 9.95 of NVIDIA's SATA drivers and now Quicktime runs smooth. Yea!
Similar Messages
-
Unable to capture in FCP, Quicktime and iMovie, camera not recognized.
I am unable to capture in FCP, Quicktime and iMovie.
I have been dealing with this problem for quite a while now, and I think I have tried everything posted on these forums regarding this issue. I have been to the Quicktime, iMovie, and this FCP forum looking for the solution. Hopefully someone has a suggestion that I have missed or have not tried yet. I have a Powerbook G4 running OSX Tiger 10.4. I am running Quicktime 7.04, and FCP 4.5.
My problem is this… I am unable to capture from my Canon ZR-200 Mini DV camera, using Final Cut Pro, iMovie and also Quicktime. FCP says no camera recognized. iMovie says no camera attached, and Quicktime says no recording device found. In FCP, I am using the Firewire Basic setting, and NTSC DV settings. I have captured in FCP with the same camera several times in the past. I think the problem started when I upgraded to OSX 10.4, or one of the Quicktime upgrades.
Here are the details…
- Camera is connect via Firewire. I have tried the built in ports, as well as a Firewire Carbus card.
- OSX recognizes the Canon ZR-200 in the System Profiler, so I know the computer sees the camera.
- I have tried the camera on a Windows XP machine, and capture works perfectly, so I know the camera is functioning properly in VTR mode.
- Deleted my FCP pref’s using FCP Rescue.
- Deleted the Quicktime receipts, and re-installed Quicktime 7.04
- Reverted back to Quicktime 7.01
- Set the audio to 44.1 in the the Audio MIDI setup in the Utilities folder
- Tried the “GarageBand” fix, opening the programing, playing a few notes and closing.
- I have installed Quicktime using the program “Yank” to completely delete Quicktime and re-install.
I may have tried more solutions, but these are the fixes that I can recall.
If anyone has any others suggestions, it would be much appreciated.
BrentHi Brent:
Although it looks as if you have tried all of the 'fixes' that are normally suggested here, please read through this Apple Article to see if some obscure thing applies to you.
iMovie: Cannot see or control camera
http://docs.info.apple.com/article.html?artnum=43000
Sue -
Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.
@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help! -
[Solved]Cannot startx on fresh install with xfce4 and nvidia-304xx-lts
I just installed Arch base onto my system with my Nvidia GTS 250 Graphics card, however I am unable to start a x session after installing xfce4 and nvidia-304xx-lts followed by the command nvidia-xconfig and reboot. When I try to issue startxfce4 I get an error pointing to /var/log/Xorg.0.log as follows
[ 24.856]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 24.857] X Protocol Version 11, Revision 0
[ 24.857] Build Operating System: Linux 3.15.5-2-ARCH x86_64
[ 24.857] Current Operating System: Linux yte 3.16.2-1-ARCH #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST 2014 x86_64
[ 24.857] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
[ 24.857] Build Date: 31 July 2014 11:53:19AM
[ 24.857]
[ 24.857] Current version of pixman: 0.32.6
[ 24.858] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 24.858] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.858] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 17 21:49:53 2014
[ 24.875] (==) Using config file: "/etc/X11/xorg.conf"
[ 24.875] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 24.897] (==) ServerLayout "Layout0"
[ 24.897] (**) |-->Screen "Screen0" (0)
[ 24.897] (**) | |-->Monitor "Monitor0"
[ 24.905] (**) | |-->Device "Device0"
[ 24.905] (**) |-->Input Device "Keyboard0"
[ 24.905] (**) |-->Input Device "Mouse0"
[ 24.905] (==) Automatically adding devices
[ 24.905] (==) Automatically enabling devices
[ 24.905] (==) Automatically adding GPU devices
[ 24.914] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 24.914] Entry deleted from font path.
[ 24.914] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 24.914] Entry deleted from font path.
[ 24.914] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 24.914] Entry deleted from font path.
[ 24.914] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 24.914] Entry deleted from font path.
[ 24.914] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 24.914] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 24.914] Entry deleted from font path.
[ 24.914] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 24.914] (==) FontPath set to:
/usr/share/fonts/misc/
[ 24.914] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 24.914] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 24.914] (WW) Disabling Keyboard0
[ 24.914] (WW) Disabling Mouse0
[ 24.914] (II) Loader magic: 0x818d80
[ 24.914] (II) Module ABI versions:
[ 24.914] X.Org ANSI C Emulation: 0.4
[ 24.914] X.Org Video Driver: 18.0
[ 24.914] X.Org XInput driver : 21.0
[ 24.914] X.Org Server Extension : 8.0
[ 24.917] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 24.918] (--) PCI:*(0:4:0:0) 10de:0615:19f1:0d76 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/131072
[ 24.918] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 24.919] (II) LoadModule: "glx"
[ 24.953] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 25.974] (II) Module glx: vendor="NVIDIA Corporation"
[ 25.974] compiled for 4.0.2, module version = 1.0.0
[ 25.974] Module class: X.Org Server Extension
[ 25.974] (II) NVIDIA GLX Module 304.123 Wed Jul 2 11:19:55 PDT 2014
[ 25.974] (II) LoadModule: "nvidia"
[ 25.974] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 26.027] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 26.027] compiled for 4.0.2, module version = 1.0.0
[ 26.027] Module class: X.Org Video Driver
[ 26.042] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 26.042] (EE) NVIDIA: system's kernel log for additional error messages.
[ 26.042] (II) UnloadModule: "nvidia"
[ 26.042] (II) Unloading nvidia
[ 26.042] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 26.042] (EE) No drivers available.
[ 26.042] (EE)
Fatal server error:
[ 26.042] (EE) no screens found(EE)
[ 26.042] (EE)
Please consult the The X.Org Foundation support
at [url]http://wiki.x.org[/url]
for help.
[ 26.042] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 26.042] (EE)
It apears to be trying to load various modules, first of which is my propietary nvidia driver which refers to the kernel log. My dmesg looks like this:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.2-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cffa0000-0x00000000cffadfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cffae000-0x00000000cffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: HP-Pavilion FQ618AA-A2L a6734f/Benicia, BIOS 5.35 12/16/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 000000000 mask F00000000 write-back
[ 0.000000] 3 base 100000000 mask FE0000000 write-back
[ 0.000000] 4 base 120000000 mask FF0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcffa0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
[ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
[ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
[ 0.000000] [mem 0x12fe00000-0x12fffffff] page 2M
[ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
[ 0.000000] [mem 0x12c000000-0x12fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff]
[ 0.000000] [mem 0x100000000-0x12bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcff9ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcff9ffff] page 4k
[ 0.000000] RAMDISK: [mem 0x3798e000-0x37cbefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FC440 000014 (v00 HPQOEM)
[ 0.000000] ACPI: RSDT 0x00000000CFFA0000 000044 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000CFFA0200 000084 (v02 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x00000000CFFA0440 004E91 (v01 HPQOEM SLIC-CPC 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000CFFAE000 000040
[ 0.000000] ACPI: APIC 0x00000000CFFA0390 00006C (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000CFFA0400 00003C (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000CFFAE040 000072 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CFFA52E0 000038 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: GSCI 0x00000000CFFAE0C0 002024 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: SLIC 0x00000000CFFB00F0 000176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
[ 0.000000] ACPI: SSDT 0x00000000CFFB14B0 00082F (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
[ 0.000000] NODE_DATA [mem 0x12fff7000-0x12fffbfff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x12fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xcff9ffff]
[ 0.000000] node 0: [mem 0x100000000-0x12fffffff]
[ 0.000000] On node 0 totalpages: 1048381
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13247 pages used for memmap
[ 0.000000] DMA32 zone: 847776 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffa0000-0xcffadfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffae000-0xcffdffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88012fc00000 s86784 r8192 d23808 u524288
[ 0.000000] pcpu-alloc: s86784 r8192 d23808 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031977
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4046408K/4193524K available (5334K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 147116K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 2333.276 MHz processor
[ 0.006681] Calibrating delay loop (skipped), value calculated using timer frequency.. 4668.99 BogoMIPS (lpj=7777586)
[ 0.006685] pid_max: default: 32768 minimum: 301
[ 0.006695] ACPI: Core revision 20140424
[ 0.012534] ACPI: All ACPI Tables successfully acquired
[ 0.013368] Security Framework initialized
[ 0.013377] Yama: becoming mindful.
[ 0.013731] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.017212] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.017970] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.017980] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.018300] Initializing cgroup subsys memory
[ 0.018326] Initializing cgroup subsys devices
[ 0.018334] Initializing cgroup subsys freezer
[ 0.018338] Initializing cgroup subsys net_cls
[ 0.018344] Initializing cgroup subsys blkio
[ 0.018375] CPU: Physical Processor ID: 0
[ 0.018376] CPU: Processor Core ID: 0
[ 0.018379] mce: CPU supports 6 MCE banks
[ 0.018387] CPU0: Thermal monitoring enabled (TM2)
[ 0.018394] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
[ 0.018487] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
[ 0.019569] ftrace: allocating 20434 entries in 80 pages
[ 0.027196] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060221] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz (fam: 06, model: 17, stepping: 07)
[ 0.063333] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.063333] ... version: 2
[ 0.063333] ... bit width: 40
[ 0.063333] ... generic registers: 2
[ 0.063333] ... value mask: 000000ffffffffff
[ 0.063333] ... max period: 000000007fffffff
[ 0.063333] ... fixed-purpose events: 3
[ 0.063333] ... event mask: 0000000700000003
[ 0.076742] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.083412] x86: Booting SMP configuration:
[ 0.083415] .... node #0, CPUs: #1 #2 #3
[ 0.130014] x86: Booted up 1 node, 4 CPUs
[ 0.130018] smpboot: Total of 4 processors activated (18673.96 BogoMIPS)
[ 0.133346] devtmpfs: initialized
[ 0.136924] PM: Registering ACPI NVS region [mem 0xcffae000-0xcffdffff] (204800 bytes)
[ 0.137923] pinctrl core: initialized pinctrl subsystem
[ 0.137968] RTC time: 1:49:28, date: 09/18/14
[ 0.138025] NET: Registered protocol family 16
[ 0.138158] cpuidle: using governor ladder
[ 0.138160] cpuidle: using governor menu
[ 0.138185] ACPI: bus type PCI registered
[ 0.138187] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.138268] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.138270] PCI: not using MMCONFIG
[ 0.138272] PCI: Using configuration type 1 for base access
[ 0.153430] ACPI: Added _OSI(Module Device)
[ 0.153430] ACPI: Added _OSI(Processor Device)
[ 0.153430] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.153430] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.155075] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.157331] ACPI: Dynamic OEM Table Load:
[ 0.157338] ACPI: SSDT 0xFFFF880129AB7600 0001F3 (v01 HPQOEM SLIC-CPC 00000011 INTL 20051117)
[ 0.157716] ACPI: Dynamic OEM Table Load:
[ 0.157721] ACPI: SSDT 0xFFFF880129AB7400 0001F3 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.158103] ACPI: Dynamic OEM Table Load:
[ 0.158109] ACPI: SSDT 0xFFFF8801295D4000 0001F3 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.158489] ACPI: Dynamic OEM Table Load:
[ 0.158494] ACPI: SSDT 0xFFFF8801295D4200 0001F3 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.158833] ACPI: Interpreter enabled
[ 0.158843] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.158857] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.158859] ACPI: Using IOAPIC for interrupt routing
[ 0.158879] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.159657] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.160132] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.165222] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.165228] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.165233] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.165516] PCI host bridge to bus 0000:00
[ 0.165519] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.165522] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.165524] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.165526] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.165528] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.165530] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
[ 0.165532] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
[ 0.165541] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.165640] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.165677] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.165716] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.165796] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.165844] pci 0000:00:1a.0: reg 0x20: [io 0xb400-0xb41f]
[ 0.165936] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.165991] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.166039] pci 0000:00:1a.1: reg 0x20: [io 0xb480-0xb49f]
[ 0.166130] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.166194] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.166216] pci 0000:00:1a.7: reg 0x10: [mem 0xf9efec00-0xf9efefff]
[ 0.166307] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.166350] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.166407] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.166427] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ef8000-0xf9efbfff 64bit]
[ 0.166516] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.166616] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.166706] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.166752] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.166807] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.166899] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.166945] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.167003] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.167049] pci 0000:00:1d.0: reg 0x20: [io 0xb800-0xb81f]
[ 0.167139] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.167203] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.167250] pci 0000:00:1d.1: reg 0x20: [io 0xb880-0xb89f]
[ 0.167339] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.167392] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.167439] pci 0000:00:1d.2: reg 0x20: [io 0xbc00-0xbc1f]
[ 0.167528] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.167580] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
[ 0.167627] pci 0000:00:1d.3: reg 0x20: [io 0xc000-0xc01f]
[ 0.167719] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.167782] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.167804] pci 0000:00:1d.7: reg 0x10: [mem 0xf9eff800-0xf9effbff]
[ 0.167895] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.167938] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.167989] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.168083] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.168135] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
[ 0.168209] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
[ 0.168214] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.168217] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.168328] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[ 0.168351] pci 0000:00:1f.2: reg 0x10: [io 0xc880-0xc887]
[ 0.168361] pci 0000:00:1f.2: reg 0x14: [io 0xc800-0xc803]
[ 0.168371] pci 0000:00:1f.2: reg 0x18: [io 0xc480-0xc487]
[ 0.168381] pci 0000:00:1f.2: reg 0x1c: [io 0xc400-0xc403]
[ 0.168390] pci 0000:00:1f.2: reg 0x20: [io 0xc080-0xc09f]
[ 0.168400] pci 0000:00:1f.2: reg 0x24: [mem 0xf9eff000-0xf9eff7ff]
[ 0.168458] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.168549] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.168567] pci 0000:00:1f.3: reg 0x10: [mem 0xf9effc00-0xf9effcff 64bit]
[ 0.168592] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.168733] pci 0000:04:00.0: [10de:0615] type 00 class 0x030000
[ 0.168748] pci 0000:04:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.168761] pci 0000:04:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.168774] pci 0000:04:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.168784] pci 0000:04:00.0: reg 0x24: [io 0xdc00-0xdc7f]
[ 0.168793] pci 0000:04:00.0: reg 0x30: [mem 0xfeae0000-0xfeafffff pref]
[ 0.168906] pci 0000:00:01.0: PCI bridge to [bus 04]
[ 0.168909] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.168912] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.168916] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.168982] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.169127] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.169187] pci 0000:02:00.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.169296] pci 0000:02:00.0: reg 0x18: [mem 0xfebff000-0xfebfffff 64bit]
[ 0.169354] pci 0000:02:00.0: reg 0x20: [mem 0xf8ff0000-0xf8ffffff 64bit pref]
[ 0.169397] pci 0000:02:00.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.169663] pci 0000:02:00.0: supports D1 D2
[ 0.169665] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.169850] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.169855] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.169859] pci 0000:00:1c.2: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.169866] pci 0000:00:1c.2: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.169932] pci 0000:01:05.0: [11c1:5811] type 00 class 0x0c0010
[ 0.169949] pci 0000:01:05.0: reg 0x10: [mem 0xf9fff000-0xf9ffffff]
[ 0.170025] pci 0000:01:05.0: supports D1 D2
[ 0.170028] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
[ 0.170112] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.170119] pci 0000:00:1e.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.170126] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.170128] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.170131] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.170133] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.170135] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.170137] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.170715] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.170769] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.170823] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.170875] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.170927] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.170983] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.171036] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.171088] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.171151] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.171253] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.171253] vgaarb: loaded
[ 0.171253] vgaarb: bridge control possible 0000:04:00.0
[ 0.171253] PCI: Using ACPI for IRQ routing
[ 0.179597] PCI: pci_cache_line_size set to 64 bytes
[ 0.179658] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.179660] e820: reserve RAM buffer [mem 0xcffa0000-0xcfffffff]
[ 0.179795] NetLabel: Initializing
[ 0.179797] NetLabel: domain hash size = 128
[ 0.179798] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.179813] NetLabel: unlabeled traffic allowed by default
[ 0.179835] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.179841] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.179845] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.181019] Switched to clocksource hpet
[ 0.187008] pnp: PnP ACPI init
[ 0.187030] ACPI: bus type PNP registered
[ 0.187128] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.187133] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.187213] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.187433] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.187436] system 00:02: [io 0x0800-0x087f] could not be reserved
[ 0.187438] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.187441] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.187444] system 00:02: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.187447] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187548] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.187551] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.187555] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187674] system 00:04: [io 0x0a00-0x0adf] has been reserved
[ 0.187678] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187756] system 00:05: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.187759] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187825] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.187829] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.188006] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.188009] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.188012] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.188014] system 00:07: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.188017] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.188133] pnp: PnP ACPI: found 8 devices
[ 0.188135] ACPI: bus type PNP unregistered
[ 0.197465] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.197469] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.197472] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.197491] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.197494] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.197497] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.197499] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.197505] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
[ 0.197510] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.197514] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.197516] pci 0000:00:01.0: PCI bridge to [bus 04]
[ 0.197519] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.197522] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.197525] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.197529] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.197532] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.197537] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff]
[ 0.197542] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.197548] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.197551] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.197557] pci 0000:00:1c.2: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.197561] pci 0000:00:1c.2: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.197568] pci 0000:00:1e.0: PCI bridge to [bus 01]
[ 0.197573] pci 0000:00:1e.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.197582] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.197585] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.197587] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.197589] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.197591] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.197593] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.197596] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.197598] pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfeafffff]
[ 0.197600] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.197602] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.197604] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf01fffff]
[ 0.197607] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.197609] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.197611] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.197613] pci_bus 0000:02: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.197615] pci_bus 0000:01: resource 1 [mem 0xf9f00000-0xf9ffffff]
[ 0.197618] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.197620] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.197622] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.197624] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.197626] pci_bus 0000:01: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.197628] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.197657] NET: Registered protocol family 2
[ 0.197878] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.197999] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.198159] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.198193] TCP: reno registered
[ 0.198203] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.198230] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.198298] NET: Registered protocol family 1
[ 0.199202] pci 0000:04:00.0: Boot video device
[ 0.199211] PCI: CLS 32 bytes, default 64
[ 0.199266] Unpacking initramfs...
[ 0.265035] Freeing initrd memory: 3268K (ffff88003798e000 - ffff880037cbf000)
[ 0.265050] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.265053] software IO TLB [mem 0xcbfa0000-0xcffa0000] (64MB) mapped at [ffff8800cbfa0000-ffff8800cff9ffff]
[ 0.265383] Scanning for low memory corruption every 60 seconds
[ 0.265750] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.266220] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.268226] zbud: loaded
[ 0.268426] VFS: Disk quotas dquot_6.5.2
[ 0.268472] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.268644] msgmni has been set to 7909
[ 0.268709] Key type big_key registered
[ 0.269063] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.269162] io scheduler noop registered
[ 0.269165] io scheduler deadline registered
[ 0.269227] io scheduler cfq registered (default)
[ 0.269402] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.269456] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.269523] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.269664] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.269772] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.269794] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.269839] intel_idle: does not run on family 6 model 23
[ 0.269876] GHES: HEST is not enabled!
[ 0.269980] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.270599] Linux agpgart interface v0.103
[ 0.270658] rtc_cmos 00:01: RTC can wake from S4
[ 0.270820] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.270850] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.270864] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.270984] TCP: cubic registered
[ 0.271114] NET: Registered protocol family 10
[ 0.271372] NET: Registered protocol family 17
[ 0.271821] registered taskstats version 1
[ 0.272365] Magic number: 14:261:812
[ 0.272465] rtc_cmos 00:01: setting system clock to 2014-09-18 01:49:28 UTC (1411004968)
[ 0.272539] PM: Hibernation image not present or could not be loaded.
[ 0.273767] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
[ 0.273769] Write protecting the kernel read-only data: 8192k
[ 0.276140] Freeing unused kernel memory: 800K (ffff880001538000 - ffff880001600000)
[ 0.277248] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
[ 0.284774] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.286420] systemd-udevd[59]: starting version 216
[ 0.299539] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.302475] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.302536] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.305975] ACPI: bus type USB registered
[ 0.306007] usbcore: registered new interface driver usbfs
[ 0.306020] usbcore: registered new interface driver hub
[ 0.306135] usbcore: registered new device driver usb
[ 0.306716] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.307076] ehci-pci: EHCI PCI platform driver
[ 0.307191] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.307253] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.307261] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.307274] ehci-pci 0000:00:1a.7: debug port 1
[ 0.311183] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.311202] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9efec00
[ 0.315748] SCSI subsystem initialized
[ 0.317397] libata version 3.00 loaded.
[ 0.320025] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.323598] hub 1-0:1.0: USB hub found
[ 0.323608] hub 1-0:1.0: 4 ports detected
[ 0.323904] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.323911] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.323925] ehci-pci 0000:00:1d.7: debug port 1
[ 0.327815] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.327834] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9eff800
[ 0.336696] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.336926] hub 2-0:1.0: USB hub found
[ 0.336936] hub 2-0:1.0: 8 ports detected
[ 0.337334] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.337345] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.337354] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.337394] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b400
[ 0.337866] hub 3-0:1.0: USB hub found
[ 0.337875] hub 3-0:1.0: 2 ports detected
[ 0.338094] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.338100] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.338107] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.338134] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b480
[ 0.338347] hub 4-0:1.0: USB hub found
[ 0.338355] hub 4-0:1.0: 2 ports detected
[ 0.338546] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.338553] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.338559] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.338578] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b800
[ 0.338786] hub 5-0:1.0: USB hub found
[ 0.338794] hub 5-0:1.0: 2 ports detected
[ 0.338981] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.338987] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.338993] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.339020] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b880
[ 0.339235] hub 6-0:1.0: USB hub found
[ 0.339244] hub 6-0:1.0: 2 ports detected
[ 0.339429] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.339435] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.339442] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.339460] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bc00
[ 0.339667] hub 7-0:1.0: USB hub found
[ 0.339675] hub 7-0:1.0: 2 ports detected
[ 0.339862] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.339870] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 0.339876] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 0.339894] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c000
[ 0.340109] hub 8-0:1.0: USB hub found
[ 0.340117] hub 8-0:1.0: 2 ports detected
[ 0.340263] ahci 0000:00:1f.2: version 3.0
[ 0.340410] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.340467] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.340515] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.340519] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 0.366734] firewire_ohci 0000:01:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 0.374399] scsi0 : ahci
[ 0.374615] scsi1 : ahci
[ 0.374814] scsi2 : ahci
[ 0.375005] scsi3 : ahci
[ 0.375196] scsi4 : ahci
[ 0.375388] scsi5 : ahci
[ 0.375468] ata1: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff100 irq 43
[ 0.375472] ata2: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff180 irq 43
[ 0.375474] ata3: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff200 irq 43
[ 0.375477] ata4: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff280 irq 43
[ 0.375480] ata5: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff300 irq 43
[ 0.375482] ata6: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff380 irq 43
[ 0.630034] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 0.693360] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.754296] hub 1-2:1.0: USB hub found
[ 0.754373] hub 1-2:1.0: 7 ports detected
[ 0.866772] firewire_core 0000:01:05.0: created device fw0: GUID 001e8c0001bb0f0a, S400
[ 1.013360] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.266684] tsc: Refined TSC clocksource calibration: 2333.285 MHz
[ 1.333363] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.336819] ata3.00: ATA-8: WDC WD10EARS-00MVWB0, 50.0AB50, max UDMA/133
[ 1.336823] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.340399] ata3.00: configured for UDMA/133
[ 1.340517] scsi 2:0:0:0: Direct-Access ATA WDC WD10EARS-00M AB50 PQ: 0 ANSI: 5
[ 1.373365] usb 2-5: new high-speed USB device number 3 using ehci-pci
[ 1.500038] usb-storage 2-5:1.0: USB Mass Storage device detected
[ 1.500227] scsi6 : usb-storage 2-5:1.0
[ 1.500322] usbcore: registered new interface driver usb-storage
[ 1.500694] usbcore: registered new interface driver uas
[ 1.660027] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.980028] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 1.980030] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.125620] usb 5-1: config 1 has an invalid descriptor of length 17, skipping remainder of the config
[ 2.125624] usb 5-1: config 1 has 1 interface, different from the descriptor's value: 4
[ 2.125628] usb 5-1: config 1 interface 0 altsetting 0 has 0 endpoint descriptors, different from the interface descriptor's value: 2
[ 2.266750] Switched to clocksource tsc
[ 2.370018] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 2.504151] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 2.504778] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 2.505402] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 2.506038] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 2.509294] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.509340] sd 2:0:0:0: [sda] Write Protect is off
[ 2.509343] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.509363] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.515260] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 2.515889] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 2.516511] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 2.517136] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 2.569106] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2.569597] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.571450] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.586591] usbcore: registered new interface driver usbhid
[ 2.586594] usbhid: USB HID core driver
[ 2.587316] input: Logitech Gaming Mouse G600 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:046D:C24A.0001/input/input2
[ 2.587394] hid-generic 0003:046D:C24A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G600] on usb-0000:00:1a.1-1/input0
[ 2.620024] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.621301] input: Logitech Gaming Mouse G600 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/0003:046D:C24A.0002/input/input3
[ 2.621413] hid-generic 0003:046D:C24A.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G600] on usb-0000:00:1a.1-1/input1
[ 2.623705] ata6.00: ATAPI: HL-DT-ST BDDVDRW GBC-H20L, 1.B8, max UDMA/100
[ 2.628682] ata6.00: configured for UDMA/100
[ 2.741224] scsi 5:0:0:0: CD-ROM HL-DT-ST BDDVDRW GBC-H20L 1.B8 PQ: 0 ANSI: 5
[ 2.796696] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[ 2.870295] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.870300] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.870508] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.983435] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.3/usb8/8-2/8-2:1.0/0003:046D:C318.0003/input/input4
[ 2.983518] hid-generic 0003:046D:C318.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.3-2/input0
[ 2.987055] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.3/usb8/8-2/8-2:1.1/0003:046D:C318.0004/input/input5
[ 2.987190] hid-generic 0003:046D:C318.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.3-2/input1
[ 3.173499] usb 1-2.7: new high-speed USB device number 4 using ehci-pci
[ 3.257551] hub 1-2.7:1.0: USB hub found
[ 3.257622] hub 1-2.7:1.0: 4 ports detected
[ 3.316702] floppy0: no floppy controllers found
[ 3.830625] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.027733] random: nonblocking pool is initialized
[ 4.403265] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
[ 4.403452] systemd[1]: Detected architecture 'x86-64'.
[ 4.434571] systemd[1]: Set hostname to <yte>.
[ 5.263934] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 5.264264] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.264322] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.264334] systemd[1]: Starting Remote File Systems.
[ 5.264630] systemd[1]: Reached target Remote File Systems.
[ 5.264663] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 5.265007] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.265025] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 5.265058] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.265067] systemd[1]: Starting Paths.
[ 5.265331] systemd[1]: Reached target Paths.
[ 5.265342] systemd[1]: Starting Encrypted Volumes.
[ 5.265614] systemd[1]: Reached target Encrypted Volumes.
[ 5.265625] systemd[1]: Expecting device dev-sda3.device...
[ 5.265819] systemd[1]: Expecting device dev-sda6.device...
[ 5.266013] systemd[1]: Starting Root Slice.
[ 5.275815] systemd[1]: Created slice Root Slice.
[ 5.275829] systemd[1]: Starting User and Session Slice.
[ 5.276279] systemd[1]: Created slice User and Session Slice.
[ 5.276291] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.276593] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.276604] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.276899] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.276910] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 5.277203] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.277213] systemd[1]: Starting Journal Socket (/dev/log).
[ 5.277507] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.277518] systemd[1]: Starting LVM2 metadata daemon socket.
[ 5.277808] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.277824] systemd[1]: Starting udev Kernel Socket.
[ 5.278109] systemd[1]: Listening on udev Kernel Socket.
[ 5.278123] systemd[1]: Starting udev Control Socket.
[ 5.278410] systemd[1]: Listening on udev Control Socket.
[ 5.278424] systemd[1]: Starting Journal Socket.
[ 5.278716] systemd[1]: Listening on Journal Socket.
[ 5.278736] systemd[1]: Starting System Slice.
[ 5.279185] systemd[1]: Created slice System Slice.
[ 5.279201] systemd[1]: Starting File System Check on Root Device...
[ 5.279858] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 5.280411] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.371945] systemd[1]: Mounting Temporary Directory...
[ 5.379927] systemd[1]: Starting system-getty.slice.
[ 5.380442] systemd[1]: Created slice system-getty.slice.
[ 5.414498] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.477478] systemd[1]: Started Set Up Additional Binary Formats.
[ 5.477515] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.503309] systemd[1]: Started Load Kernel Modules.
[ 5.503363] systemd[1]: Starting Apply Kernel Variables...
[ 5.504202] systemd[1]: Mounting Configuration File System...
[ 5.504898] systemd[1]: Mounted FUSE Control File System.
[ 5.504935] systemd[1]: Mounting Huge Pages File System...
[ 5.505656] systemd[1]: Mounting Debug File System...
[ 5.506353] systemd[1]: Starting Setup Virtual Console...
[ 5.507155] systemd[1]: Starting udev Coldplug all Devices...
[ 5.507863] systemd[1]: Starting Journal Service...
[ 5.508912] systemd[1]: Started Journal Service.
[ 5.600542] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[ 5.836201] systemd-udevd[175]: starting version 216
[ 6.237023] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 6.237029] ACPI: Power Button [PWRB]
[ 6.237089] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 6.237092] ACPI: Power Button [PWRF]
[ 6.393110] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000084f (\PMRG) (20140424/utaddress-258)
[ 6.393118] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.393146] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.403316] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.624551] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 6.697197] sound hdaudioC0D0: ALC1200: SKU not ready 0x411111f0
[ 6.697713] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 6.697715] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.697718] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.697720] sound hdaudioC0D0: mono: mono_out=0x0
[ 6.697722] sound hdaudioC0D0: dig-out=0x11/0x1e
[ 6.697724] sound hdaudioC0D0: inputs:
[ 6.697726] sound hdaudioC0D0: Front Mic=0x19
[ 6.697729] sound hdaudioC0D0: Rear Mic=0x18
[ 6.697731] sound hdaudioC0D0: Line=0x1c
[ 6.697732] sound hdaudioC0D0: dig-in=0x1f
[ 6.702189] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 6.709310] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 6.717944] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input8
[ 6.718325] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 6.718367] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 6.718409] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 6.718451] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 6.718493] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 6.718576] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 6.718699] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 6.718743] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 6.728756] microcode: CPU0 sig=0x10677, pf=0x10, revision=0x705
[ 6.780564] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 6.802218] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.802227] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 6.802531] r8169 0000:02:00.0: irq 45 for MSI/MSI-X
[ 6.802745] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc90010736000, 00:24:8c:13:67:78, XID 1c4000c0 IRQ 45
[ 6.802748] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 6.815163] microcode: CPU1 sig=0x10677, pf=0x10, revision=0x705
[ 6.815200] microcode: CPU2 sig=0x10677, pf=0x10, revision=0x705
[ 6.815216] microcode: CPU3 sig=0x10677, pf=0x10, revision=0x705
[ 6.815650] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 6.852178] iTCO_vendor_support: vendor-support=0
[ 6.951618] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.951664] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
[ 6.952163] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.961276] systemd-udevd[183]: renamed network interface eth0 to enp2s0
[ 6.962065] mousedev: PS/2 mouse device common for all mice
[ 7.539521] Adding 4051964k swap on /dev/sda3. Priority:-1 extents:1 across:4051964k FS
[ 8.405763] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
[ 8.687024] systemd-journald[157]: Received request to flush runtime journal from PID 1
[ 9.356701] floppy0: no floppy controllers found
[ 10.274611] r8169 0000:02:00.0 enp2s0: link down
[ 10.274665] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 11.871962] r8169 0000:02:00.0 enp2s0: link up
[ 11.871971] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
Due to the length of the above logs I looked for a option to upload them but could not find the button for this, my appologies. Would anyone be able to see where I am going wrong?
Last edited by meschael (2014-09-18 04:16:08)The first code block contains my Xorg.0.log however I just tryed modprove nvidia and recieved FATAL: Module nvidia not found. which I discovered was solved by someone here https://bbs.archlinux.org/viewtopic.php?pid=961852 however when I tryed to do a pacman -S nvidia nvidia-utils I get a unresolved confilict with nvidia-304xx-utils which after trying to remove with pacman -Rs shows dependencies with cario, Im not sure how far back I should start removing things to solve this conflict or how to go abouts solving it
+++++++++
Update: Solved
+++++++++
I did some more looking and found I could force the uninstall of nvidia-304xx-lts with pacman -Rdds nvidia-304xx-lts and after revisiting the Nvidia page on the wiki for the dozenth time I started thinking maybe I needed nvidia-304xx oposed to the lts release as google as kindly pointed out lts is long term support and maybe my kernel was not lts and thus conflicting. This turned out to be the case, after removing the ofending lts version of the driver, replacing with the correct nvidia-304xx , another nvidia-xconfig and reboot followed by modprobe nvida and startxfce4 my wounderfull xfce is now running as I type this messsage in firefox. Thank you for you help, as you asking about the modprobe output caused the chain of events leading to the success.
Last edited by meschael (2014-09-18 04:15:30) -
Sever issue with Xorg and Nvidia Drivers
I run a 2.6.20 kernel with Xorg and Nvidia drivers all from arch rep on a Asus NV6200. Everything works fine, except one thing. When I exit X, the monitor shuts down imediatly. It wont start up at all, not even by manual startup. I cant understand what happens. The configuration is correct, is done with the correct settings for my video-card and monitor taken directly from the documentation. I cant use my X server at all since several days ... I checked the logs and there are no EE's. Anyway ... here is the log. Help anyone can help, I cant use X at all.
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux solarflare 2.6.20-ARCH #1 SMP PREEMPT Fri Mar 16 20:22:11 CET 2007 i686
Build Date: 27 February 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 21 03:26:45 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "AOC 7F+"
(**) | |-->Device "NVIDIA 6200"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(**) FontPath set to:
/usr/share/fonts/misc
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81c34a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.1
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3099 card 1106,3099 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0a:0: chip 1317,0985 card 1113,1216 rev 11 class 02,00,00 hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1019,0996 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1019,0996 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1019,0996 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3104 card 1019,0996 rev 82 class 0c,03,20 hdr 00
(II) PCI: 00:11:0: chip 1106,3177 card 1019,0996 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1019,0996 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 1019,0996 rev 50 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0221 card 1043,820c rev a1 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe8000000 - 0xeaffffff (0x3000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV44A [GeForce 6200] rev 161, Mem @ 0xe8000000/24, 0xd0000000/28, 0xe9000000/24
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[1] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[3] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[4] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[5] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[6] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[7] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[8] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[9] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[10] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[11] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[1] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[3] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[4] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[5] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[6] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[7] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[8] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[9] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[10] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[11] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[5] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[12] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[13] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[14] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[15] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[16] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[17] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.2.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.9755
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.9755
Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) NVIDIA dlloader X Driver 1.0-9755 Mon Feb 26 23:23:13 PST 2007
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="NVIDIA Corporation"
compiled for 7.1.99.2, module version = 1.0.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules//libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[5] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[12] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[13] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[14] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[15] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[16] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[17] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[5] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[16] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[17] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[18] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[19] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[20] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[22] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): NVIDIA GPU GeForce 6200 at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 05.44.a2.03.00
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:1:0:0:
(--) NVIDIA(0): AOC Spectrum7F (CRT-0)
(--) NVIDIA(0): AOC Spectrum7F (CRT-0): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1024x768"
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) NVIDIA(0): DPI set to (81, 81); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b]
[1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
[2] 0 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[7] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[8] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[10] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[12] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[19] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[20] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[21] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[22] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[23] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) NVIDIA(0): Setting mode "1024x768"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc104"
(**) Keyboard1: XkbModel: "pc104"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 2, should be 1; fixing.No ... the problem is in the kernel that comes precompiled.
I did this test.
The first time I installed the kernel I unloaded nvidiafb since I dont like it.
When I install nvidiafb back something strange happends. Nvidia module fails to load.
The modprobe sais it cannot find the device nvidia.ko ... but it is there!
So my best guess is, there is something with the kernel. Any ideas?
Problem resolved, installed older driver
Last edited by Nefer-Ra (2007-03-22 02:59:25) -
I have a mid 2007 MacBook Pro with 2GB of RAM and NVIDIA GeForce 8600M graphics card. Is it possible to upgrade the RAM and the graphics card?
The RAM can be upgraded as indicated below. The Graphics card can not be upgraded.
Maximum Memory
6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM -
Why can't I use my mid 2010 macbook pro with 8GB memoir and NVIDIA GEForce GT 330M 256MB to run 3D in photoshop CC?
3-D is very memory intensive.
System requirements | Photoshop
Mac OS
Multicore Intel processor with 64-bit support
Mac OS X v10.7, v10.8, or v10.9
2 GB of RAM (8 GB recommended)
3.2 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024x768 display (1280x800 recommended) with 16-bit color and 512 MB of VRAM (1 GB recommended)**
OpenGL 2.0–capable system
Internet connection and registration are necessary for required software activation, membership validation, and access to online services.*
** 3D features are disabled and some Mercury Graphics Engine enhanced features may not work with less than 512 MB VRAM. Read the Help article.
Bottom line, you don't have enough VRAM
Nancy O. -
I just bought a new computer and had files transferred along with itunes to the new computer. I can't get it to work. It doesn't recognize the extensions for itunes. I also tried downloading Quicktime and couldn't get it to download.
iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
Help!
Thanks, MarkUnfortunately, the error message gives no details about what codec might be missing or what it needs.
If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
It's a stupid error message. Apple should do better than that.
Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
I'll call Apple support when I get a chance.
Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems. -
Quicktime and itunes wont install. I have never had quicktime installed on my computer before
I recently bought an ipod touch 4g and realized that I needed itunes to activate it. After downloading itunes it wouldn't install, no error messages or anything, when I click on the installer it just doesn't do anything.
After downloading several versions of itunes (older versions) I finally found one that started to install. Then it told me that I need Quicktime on my computer in order for it to install. So I downloaded the latest version of quicktime and had the same problem, when I click on the installer, nothing happens. I tried downloading older versions of quicktime but still had the same problem.
I have never had quicktime or itunes installed on this computer before, so I know that it isn't an older version of the program hidden in my computer that is preventing the installation from happening.
My computer is running on Windows 7. I know that there wasn't a problem with downloading the software, the files weren't corrupted or anything. There are no error messages, the software doesn't even partially install. When I click on the installer, nothing happens. I have tried running the programs as an administrator and that doesn't change anything.
I have tried so many different things, but can't remember everything that I tried. Yesterday I spent nearly 10 hours trying to sort this out because I was determined to get my ipod running. I only stopped when my internet credit ran out and today after buying some more, I am trying again. Please help.I appreciate the quick response, thank you for that.
One thing I did try was windows cleanup utility and searched through the program files for all apple software, but had none. I even deleted the temp files on my computer, and on my internet browser, but nothing happened.
One thing that I didn't think of was deleting the installation files in my downloads folder, pretty silly of me but I didn't think it would make a difference. I also spent about 2-3gig on downloads yesterday and didn't want to delete the files but as a last resort I did and emptied my recycle bin, then downloaded a fresh copy of Quicktime and finally it installed!
Now I am in the process of downloading a fresh copy of iTunes, the download hasn't finished yet so I haven't had a chance to install it yet but I have a much better feeling about it this time after deleting all the old installation files from my downloads folder. If Quicktime worked after that, I am sure iTunes will.
I can't believe it was something so simple as deleting the installation files in my downloads folder and emptying the recycle bin. I had seriously gone through my entire computer looking for any little file that was related to Quicktime or iTunes. I didn't even think of the two most obvious places. I spent so much time and credit downloading multiple files and my computer even got a virus when trying to download a copy from an unauthorized source, I had no problem getting rid of the virus, but struggled with Quicktime and iTunes, that is why I got so frustrated! I feel like an idiot now :-P
Thank you for your help. I still havent installed iTunes yet, so fingers crossed. I think it will work now though. -
Quicktime and iTunes "quit unexpectedly" when I try to open them
I'm getting an error message whenever I try to open either Quicktime or iTunes saying that the application quit unexpectedly. The error report (for both Quicktime and iTunes) says (amongst other things):
Exception: EXCBADACCESS
Codes: KERNPROTECTIONFAILURE
Thread 0 Crashed with PPC thread state 64
Anyone any ideas? Thanks.Please post the crash report here so we can view it and offer help.
-
Final Cut, Quicktime, and Pro Tools conflicts
Hi there,
I'm working on a "situation" I recently encountered, and wonder if anybody else has had this problem.
I'm trying to upgrade Pro Tools LE to version 6.9.2 with the install discs that were sent to me from Digidesign, and it's wreaking havoc with Final Cut Pro and Quicktime.
Initially when I installed the upgrade, I was running OSX 10.4.2, FCP 5.0.3 and QT 7.0.2. The Pro Tools upgrade worked fine, as did FCP when I launched it, but Quicktime wouldn't launch- spinning beachball forevermore.
So after doing all the basics- trashing pref's and render files, repairing permissions, etc.- and finding QT still wouldn't work, I tried upgrading to QT 7.0.3.
Once I did that, QT still wouldn't work, and Final Cut Pro would no longer launch. It just hung on the application startup screen, at no particular point each time.
I then upgraded to FCP 5.0.4, and as well OS 10.4.3. No luck. I installed the Pro Application Support updates 2005-02 1.0, and 3.1, and still no luck.
Since there is not yet a downgrade from QT 7.0.3 to 7.0.2, I ran the 7.0.2 to 7.0.1 installer, and downgraded to QT 7.0.1. QT still wouldn't launch, and FCP still hung on launch but this time it hung at the point where it was loading audio filters.
I tried removing the audio filters from their folders to see if it would launch then, but that didn't work. At this point, the only thing I could think to do was to uninstall Pro Tools altogether (safe uninstall, not clean uninstall) and this is what finally brought Quicktime and Final Cut back to life. Great, because I use FCP and QT everday, but I no longer have the use of Pro Tools.
Throughout this process I made sure to diligenty repair permissions, trash prefs, and restart whenever I made a change.
So I'm not sure at this point how to get Pro Tools LE 6.9.2, Final Cut Pro 5.0.4, and Quicktime (any version above 7.0) to work harmoniously, and I'm unable to spare any more troubleshooting time for a week or so because there are of course, projects due.
Has anybody else encountered these oddities?
Thanks a lot,
JoniHi, Joni C
I'm Bump,
I'm having the same trouble, I have FCP I'm running it on a G5 power Mac dual 2.5 ghz with 2.5 gb of memory, my os is 10.4.4. I also have Quicktime pro 7.0.3 and I have Pro Tools LE 7.0, every time I try to use FCP it starts and about five sec. later it shuts back down. I also have a Universal Audio UAD pci card that runs audio plugins and I also have fxpansion program it converts my vst & Au plugins to rtas for pro tools le. IBefore I installed FCP I wiped my hard drive and re installed a fresh version of tiger 10.4 and then I installed FCP studio, then Pro Tools, then all plugin and kept checking to make sure every thing was working correctly and then the U audio stuff with the Vst to rtas wrapper and it all was working fine. I even did the full final cut tutorial still worked fine. Yesterday out of no where final cut just stop working and still all the other programs work fine like dvd studios, soundtrack, motion, pro tools. If you can shead any light on this I would be very greatful
Bump -
Mail, App Store, Quicktime and others don't work!
I downloaded OS X Mavericks but mail crashes every time i open it with my IMac.
Also App Store, Quicktime and other software don't work.
I'm really in difficult! Help me please!Mmmmm I tried this an it didn't seem to solve my problem, but I think it helped me understand what's going on slightly more than before. I restored my system and files after my HD became corrupted by duping the drive. When I restored everything, it seems there might have been some conflicting problems with the OS and two identical users were created. So now in order to access my personalized settings and what not, I need to unlock my user settings and leave it unlocked for a few hours. This wouldn't be a problem if my MBP didn't give me kernal panics every time I run Safari or some general application for more than 10 minutes. I'm going to declare AppleCare as it's been under 3 years, but want to wait before my replacement iMac comes. Thank you for your help.
-
How can I locate, uninstall Quicktime and iTunes in order to reinstall?
Installed iTunes and Quicktime and bought music. Then tried to access a couple of week later. From iTunes got message 'the feature you are trying to use is on a network resource that is unavailable'. Quicktime says 'Error 46: could not load or find the QT ActiveX control'. I can't access them through Add/Remove Programs, so can't uninstall or update. Any advice or suggestions would be greatly appreciated.
DELL Windows XPI've installed and run Win Install Cleanup. Have tried reinstalling iTunes and QT a couple of times. Both times, the status bar freezes at four 'blocks' from the end, with the message 'Registering iTunes automation server'. The Task Manager says the installer's status is Running, so I don't know what to do, other than uninstall as best I can and start the process again. Could it be that the Security Center is preventing it from completing the installation? Any suggestions gratefully received.
DELL Windows XP -
Any known problems with 2.6.32.5 kernel, xorg 1.7.3.902 and nvidia 190
Hi everybody.
Last update I did was when xorg 1.7.x (where x is between 1 and 3, dont remember), and it broke my xorg, I had some glitches with graphics, and x randomly crashed.
Now xorg 1.7.3, kernel 2.6.32.5 and nvidia 190.53 is here for pretty long time and as arch suer I feel committed to update
So i read the forum here a bit, and havent found any particular issues that broke the system, but I want to be safe.
I got nvidia geforce 6600 agp if it does matter.
So is there any particular issues that can arise after updating?
Thanks a lot!Similar problem here, after updating xorg and nvidia driver the system freezes with nvidia logo on display and caps lock and scroll lock leds blinking.
I got nvidia geforce 7300.
Any solution to this besides downgrading?
Maybe you are looking for
-
NO Authorization error when accessing Functional module RH_CUT_OBJECT
Hi, I am getting NO AUTHORIZATIOn error when I am executing SE37-->FUNCTIONAL OBJECT-RH_CUT_OBJECT. I also checked SU53 screenshot which says AUTHORIZATION CHECK SUCCESSFUL and there are no errors or missing authorizations highlighted in SU53. I swit
-
Sumtotal error 404 - file or directory not found
Hi, We have a SCORM 1.2 compliant content created using Captivate 5. It's a multiple SCO (6 modules) combined into a single SCORM package. When the package was loaded in Sumtotal LMS, one of the modules alone does not launch and throws the below erro
-
Can I sort the images used in a book's browser by the # of times used?
I'm also producing a DVDSP slideshow of the event's (selected) photos not included in the book. Q2: Can I sort the images used in a book's browser by the # of times used? That way I don't have to search thru hundreds of photos. When used in a book, e
-
I'm a junior in highschool, and i need advice! I have the choice of an iPad 2, or a Macbook Pro 13". Now to explain, i need a "computer" for Garage band, aka recording music, and just general college/highschool things like essays, just like browsing,
-
Where is my "Track Reviews" file
I posted a pdf to share with someone. Going to the "Track Reviews" on the pdf, I was able to get to the file that was being shared. Now it's gone. When I go to the menu tab "Track Reviews" I get the message " You currently don't have any initiated r