Quicktime and /or the appropriate codec do not appear to be installed.

Could not import file ....... .mov. QuickTime and /or the appropriate codec do not appear to be installed.
Quicktime is indeed installed and the files play fine in other programs.  I have same setup on another laptop and all is ok. I am trying to determine the problem..

Read Bill Hunt on a file type as WRAPPER
http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/

Similar Messages

  • CS5 - "quicktime and/or the appropriate codec do not appear"

    Hey everyone,
    I'm trying to import a video file created in FCP7 into Encore CS5 to make a blu ray.
    I've exported my video as a 1080p/24 ProResHQ quicktime (NOT a QT reference, but the full contained QT file), and every time I try and import it into Encore I get the error "quicktime and/or the appropriate codec do not appear to be installed"
    I've seen some threads talking about how the solution was to not make it a refernce file, or use a non QT codec, but since neither of those restrictions apply here, I'm stumped.
    I'm running CS5 on a Mountain Lion 10.8.1 brand new installation of everything.
    Any suggestions?
    thx!

    Read Bill Hunt on a file type as WRAPPER
    http://forums.adobe.com/thread/440037?tstart=0
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
    Report back with the codec details of your file, use the programs below
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainfo.massanti.com/

  • This type of file is not supported, or the required codec is not installed.

    About two months ago, I was able to edit these files and create videos from them. Now I get the following message: This type of file is not supported, or the required codec is not installed.
    Aside from regular Windows updates, nothing has been added or removed from my PC.
    I’m using fully patched Windows 7
    Premiere Elements 8.0
    Canon T2I Hi def movies are .MOV

    I can't believe that tech challenged moi is replying to the codec issue.  I bought a new computer with Windows 7.  I won't go into the tech issues with a Windows update....   Anyway I downloaded Photoshop Elements 8 and figured out how to import my photos and videos to Photoshop on the new comptuter.  Photos were fine but videos wouldn't play.  I got the messages about Apple's Quicktime required and then the "required codec is not installed".  I went "What is a "codec"!
    I downloaded Quicktime which went smoothly but I still had the "required codec not installed" message to deal with.  I researched and found that it referred to compressed/decompressed files(?)  Next I googled "Windows 7 codec download" (not even sure if there was one).  There was!   I clicked on the first result and downloaded the codec.  The info stated that this codec should read 99.9% of video files.  Went back to Photoshop and clicked on the blue video thumbnail.  It worked!!!  The video played just as it did on the old computer.
    Hope this helps someone else.  Now why would Windows 7 not include this codec in the first place.  I never had to download one before on other computers.  Only Quicktime needed downloading.  Oh, well.
    Maggie

  • I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which als

    I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is  not installed.  When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video.  I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video.  Do you have any suggestions?  I researched codec, but do not understand them at all.

    gloucester
    In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
    that appears at the top of this forum.
    Premiere Elements 10 NVIDIA Video Card Driver Roll Back
    If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
    Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
    back the video card driver version instead of assuring that it is up to date.
    Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
    glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
    to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
    the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
    Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
    Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
    http://forums.adobe.com/thread/1317675
    Older NVIDIA GeForce drivers can be found
    http://www.nvidia.com/Download/Find.aspx?lang=en-us
    A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
    http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
    ATR

  • Error Message: This type of file is not supported, or the required codec is not installed?

    I am trying to get media from my computer, and I only receive this error message :
    This type of file is not supported, or the required codec is not installed?
    What should I do? I have a window 8 laptop. My video files are from my itouch/ipod. I am using Premiere Elements 7.
    I have used this software with success before. HELP would greatly be appreciated!

    darlingdarleen
    Did both laptop 1 and 2 have QuickTime (latest version or any version) installed on the computers with Premiere Elements 7 when you got this "this type of file......" message?
    If you go to the opened Premiere Elements 7 projects involved and look at Share/Personal Computer/QuickTime, do you find that QuickTime Presets are shown and that you find export settings choices under the Advanced Button/Video Tab and Audio Tab?
    Look at the file name of the video. Do you see any irregularies in the name of the file, dots and such?
    If you record new iPod footage, open a new Premiere Elements project, and import that iPod footage, do you still get the error message? Putting aside, iTouch, what model iPod are these videos coming from?
    Thanks.
    ATR

  • Re user tip: How can I import a homemade DVD into iMovie for editing? - I've followed instructions so far so good, until I get to "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. "  How do I do that?

    Re AppleMan 1958 excellent user tip: How can I import a homemade DVD into iMovie for editing? -
    I've followed instructions with success until  "You can then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec as your video codec. "  How do I do that?
    I installed MGEG Streamclip 193b8 and used their utility to install quicktimempeg2 and got a message stating it was successfully installed.  (I'm on latest Maverick 10.9.2 on iMac)  Then I dragged the VIDEO_TS file from my home DVD into the streamclip app.  It asked which of 4 files to use, and I selected the first one.  Streamclip played the video with the sound.  so far so good. but now I cannot figure how to use quicktime player 10.3 to export this vob file out of streamclip.

    Thank you for your quick reply and for clearing up my confusion.  I'm exporting the first section now.  I choose the smallest size, 3x4 but I'd prefer to go higher as this DVD was originally a VHS home movie.  I'm wondering if after three conversions (VHS,->DVD->MPEG) the resolution will be so poor as to not support a larger size frame?  If it can, what size should I select when I export? 

  • How to solve "this type of file is not supported, or the required codec is not installed"?

    Hi all,
    I've just started using a new computer with WIndows 8.1 within the last week and have loaded my Adobe Premiere Elements 11.0 software into it.
    In trying to view and edit a video I created on my old computer, I got "Media Pending" and "Media Offline" notices as soon as I began. The source files are located on an external drive with a permanent letter designation. I began the process of reconnecting my Project Assets files with the source files this morning, but have now encountered a new roadblock. Each time I try, I get the message "this type of file is not supported, or the required codec is not installed." It offers no information or options other than to click "OK," which is not very helpful.
    All the source files are located in one folder on my external drive. I have been able to reconnect the JPEGs and the mp3 source files but not the AVI video files.
    Here are three screenshots. The first is the "Media Offline" message, the second is the message I receive when I try to reconnect my Project Assets to the source files and the third is a screenshot of the codecs installed on the new computer.
    Here is my new computer information:
    Model: Del Inspiron 3847
    Intel Core i5-4460
    CPU @ 3.20 GHz  3.20 GHz
    RAM 8 GB
    System type: 64-bit, x64-based processor
    I hope someone can guide me. What do I need to do to solve this problem?
    Thank you.
    Message was edited by: Janie Christensen Ficara

    StreetSongs
    Thank your for the information supplied.
    But, what are the properties of this .avi file that you seek?
    Video Compression
    Audio Compression
    Frame Size
    Frame Rate
    Interlaced or Progressive
    Pixel Aspect Ratio
    Right now of prime interest is the video compression that is being wrapped by that AVI wrapper/container.
    AVCHD.avi
    MotionJPEG.avi
    XviD.avi
    DviX.avi
    other
    There are instances were a particular video compression or a particular container/wrapper format is each supported by Premiere Elements, but
    not a combo of those particular two. But, in this instance, I suspect this to be a MotionJPEG video codec issue, but your details will
    point us to the actual situation, and we will plan troubleshooting strategy from there.
    ATR

  • Export HD1440x1080 to quicktime and SAVE the ratio

    I made a project that is HD1440x1080 and I want to export to quicktime and save the ratio. Everything I tried gets smashed in to a 4:3 box.

    Have you tried setting the Conform Aperture property in QuickTime 7? It should be set to either Clean (to eliminate blanking) or Production (to simply correct the pixel aspect ratio, but leave the blanking). If you have an existing export, it should pop into the right aspect ratio just by toggling this property on.
    Or has that not worked for you?

  • I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

    I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

    The sound seems very faint but can here static on playback.

  • When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the test and change the font, it does not change it properly?

    When I convert my pdf doc to word, the fonts go really weird and it also puts some text into boxes. when I try to select the text and change the font, it does not change it properly? This is making it impossible to amend.

    Hi Janedance1,
    If the PDF that you converted already has searchable text, please try disabling OCR as described in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel. (If the PDF was created from a scanned document and doesn't already have searchable text, disabling OCR isn't a great option, as the text won't be searchable/editable in the converted Word doc.)
    Please let us know how it goes.
    Best,
    Sara

  • Good night recently my iphone 4s was exchanged for a new one because was defective and was in warranty. the problem is that now I try to use the same apple id on itunes and applications while had bought the old iphone does not appear and I think should ap

    good night recently my iphone 4s was exchanged for a new one because was defective and was in warranty. the problem is that now I try to use the same apple id on itunes and applications while had bought the old iphone does not appear and I think should appear. Can someone help?

    ?

  • Adobe Premiere Elements 12: This type of file is not supported, or the required codec is not installed

    Hallo! I use Adobe Premiere Elements 12 on my computer (PC, windows 7). When I try do re-open my projects on Adobe Premiere Elements I get the message: This type of file is not supported, or the required codec is not installed. The file type of my saved projects is: Adobe Premiere Elements Project (.prel). The same happens when i try to re-open the auto save files. This is very annoying because I losse all my earlier work. I would be really grateful for help. Best regards, Stefan

    With the QT Player installation, you should have Apple's H.264 CODEC.
    Maybe this ARTICLE will give you some tips on the GoPro footage.
    Good luck,
    Hunt

  • I have a MacPro with 10.7.2 installed. I want to create a new partition and install 10.5. When I put in the install DVD and restart the computer, it does not restart. What can I do?

    I just purchased a  MacPro with 10.7.2 installed. I want to install 10.5 on a separate partition.
    I created the partition with no issues, now when I put in the 10.5 install DVD and restart the computer, it does not restart.
    All I get is a grey screen. no icons, no nothing. I have to shut the computer down.
    I really need to do this. I plan on upgrading to FCP X, but I still need to finish some old projects that were done with FCP 7. I need the different boot drives

    Mac Pro - Mid 2010
    Processor  2 x 2.66 GHz 6-Core Intel Xeon
    Memory  8 GB 1333 MHz DDR3 ECC
    Graphics  ATI Radeon HD 5870 1024 MB
    Software  Mac OS X Lion 10.7.2 (11C74)
    This is a brand new machine that I just purchased from Apple. It was delivered yesterday
    The old computer is an old PowerMac G5, but my OS X install disc is a retail version of 10.5.
    I also tried the OS X 10.5 install disc that came with my MacBook Pro (2.6 Ghz Intel Core 2 Dual).
    Same issue - nothing but a grey screen when the system tries to boot from the DVD

  • I have just installed a new hard drive in my imac intel 20" (2006) and now the hard drive does not show up in the 'select destinations' folder of the install program.

    I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
    It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
    If anyone has any suggestions I would be happy to hear them.
    I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
    I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
    Anyone?

    Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
    The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
    I have my suspiscions about the drive but any help would be appreciated.

  • I just switched from Outlook to Mail and now the sent messages are not being displayed.  Help, please.

    I just switched from Outlook to Mail and now the sent messages are not being displayed.  Help, please.

    Back up all data. Rebuild the mailbox.

Maybe you are looking for

  • Error when migrating weblogic 10.3.0 to weblogic 10.3.2

    Hi, i try to migrating my application from weblogic 10.3.0 to 10.3.2 and when i run i've got this error (from tomcat) java.rmi.MarshalException: CORBA MARSHAL 0 No; nested exception is: org.omg.CORBA.MARSHAL: vmcid: 0x0 minor code: 0 completed: No at

  • IPod 80GB: My computer won't read the iPod is connected!

    I plug the iPod in and it lights up, but it doesn't say it's plugged in. If I have it plugging in when I restart the computer it says it's connected but my computer won't start. It's just a black screen with a flashing white underscore.

  • How to access files outside a .jar file netbeans project

    Hi, i need to access a file outside a built project inside netbeans. Ideally i would like this file next to the .jar file as myapp.properties. If possible i would like it so that when i am compiling and running the project in netbeans the file can be

  • Production Confirmation - Report

    Dear Sirs, I am doing production confirmation with a particular Scrap / Reject Qty. through CO11n / CO15. Client requires the following: 1. Wants to Track the Scrap Qty. which is being posted. 2. Wants to note down the Reasons of rejections and wants

  • Identify the Button Pressed in BBP_DOC_CHANGE_BADI ?

    Hi guys, Do you know how could I identify which button was pressed in BBP_DOC_CHANGE_BADI ?    Because that badi is called a lot of times, but I would like to execute some code when the end-user pushes the "submit" button. Do you know ? Thank yoiu !!