Quicktime and Playing Audio CDs - Why Can't I Select the Whole CD to Play?

I unfortunately agreed to update my Quicktime software when prompted by Apple. Since then, when I try to play audio CDs while working on my Mac, I have to select one song at a time and then select "play" in order to hear it. Now, only 48 hours ago, all I had to do was double click on the audio CD and the whole thing would play with no problem. This is why I am so wary of this so-called "convenient" and "user friendly" update alerts because you never know what the update actually contains and how it is going to change the behavior of your computer!
Anyone out there in the Mac community know how to fix this problem?

Anyone out there in the Mac community know how to fix this problem?
Would assume most people now use iTunes to import/convert audio files for playback/storage on their computer/iPod and/or burning of custom MP3 CDs which hold on the order of 10 times as much music and are compatible with most current generation CD/DVD players.

Similar Messages

  • Is 4/4 time the only time signiture available and what audio file type can will import using the media browser?

    Is 4/4 time the only time signiture available and what audio file type can will import using the media browser?

    latela33 wrote:
    Is 4/4 time the only time signiture available
    so far, yes, if you want more, be sure to let Apple know:
    http://www.bulletsandbones.com/GB/GBFAQ.html#sendfeedback
    (Let the page FULLY load. The link to your answer is at the top of your screen)
    latela33 wrote:
    what audio file type can will import using the media browser?
    44.1k/16-bit AIFF, WAV, or Caf files

  • The Superdrive on my MacBook Pro ejects audio CDsa few seconds after they are inserted. This happens with both prerecorded CDs I have bought in music stores AND with audio CDs I have recorded myself, on the very same computer, via iTunes.

    The Superdrive on my MacBook Pro ejects audio CDs just a few seconds after inserting them. This happens both with original audio CDs I have bought in music stores AND with audio CDs I have recorded myself, on the very same computer, via iTunes. The same does NOT happen with data CDs (e.g., stuff in mp3 format), which are read just fine. This behaviour started a couple of weeks ago, until then everything had worked just fine for years. I am running iTunes 11.1 under Snow Leopard 10.6.8. Any idea?
    Fabrizio

    You could also try a SMC reset:
    Resetting the SMC (System Management Controller) on Intel-based Macs:
    http://support.apple.com/kb/ht3964  and
    http://support.apple.com/kb/HT1237?viewlocale=en_US

  • Why can't we have the whole photo as our background and y is it difficult to zoom in and out or move the pic to the left and the right?

    iPad 3 is having difficulties  with changing the backgound, sometimes it won't change it's won't zoom out or in,or  move the pic to the left or right , also get the whole picture,

    It's a glitch, no idea when or if Apple will fix it.
    One work around is to go to the photos app and 'send' your photo to be wall paper. It gives you a bit more control, even if it doesn't give you all that you used to have.

  • Why can't I see the whole image?

    I can not see the whole image in the viewing area. All I get is a partial rectangular section, with the rest being either white, or checkerboard. It doesn't matter what size the image is, nor how many layers, or even whether I use the 32 or 64 bit versions of the software. I even have the same problem when I create a new image from scratch. It doesn't matter whether I reboot the system either.
    I am using Windows Vista, on a two year old machine, but it does have a powerful processor, and 4GB of RAM. I've checked the system resources, and the CPU is only 25% occupied with 2GB or RAM to spare... so what gives?

    You need an updated display driver.
    Go to the web site of the maker of your video card (not Microsoft), and locate their current release for your hardware and OS.  Download and install, and it will almost certainly solve this issue.
    -Noel

  • Why can i only select playlists from iTunes to play with my slideshows?

    I used to be able to select individual tracks from my itunes library to play with slideshows. For some reason i only seem to be able to select playlists now?
    Anybody know what is going on here? I did recently upgrade my iLife, has this got anything to do with it?
    Any feedback or hints and tips greatly received.
    G4 Powerbook, 1.25 Ghz   Mac OS X (10.3.9)   iPod 5gen 30G, Sony DSC-P7

    hi chris,
    You might just have to fiddle around with the window and the dimple.
    Take a look at the quicktime movies to see if it will help you.
    Music menu for Cinematic Slideshow
    Music menu for "on the fly" Slideshow
    Lori

  • When I use migration assistant it won't let me use my account name that I'm signed in with.  It requires me to select a different user name and then creates a separate account where my files live.  Why can't I select the user name and account name I have?

    I'm trying to migrate my music and pictures over to my new iMac.  When I use the migration assistant it connects to my PC fine but it won't let me use the account name and username that I have created as the admin.  It requires me to create a new user account - so then I have two separate accounts to log in to which i don't want.  How do I get it to let me use the current account that I have to move my files to?
    Thanks!

    Migration Assistant creates a new account and migrates all the information you have requested to that new account. There is no way around that. However once migrated you can move the data to the account you want to. Here are some instructions for doing so:
    Transferring files from one User Account to another.

  • I subscribed for Cloud with adobe photoshop cc and lightroom 5. Why can't I download the app from the Cloud centre?

    Hi,
    I have just subscribed to Adobe photoshop cc and LR5 but I cannot download LR5 from the Creative Cloud Center because it is not showing in the list of apps.
    Can you please help me?
    Best regards,
    David

    Have you already got LR installed?  If so, you might have to uninstall it first.  Otherwise try https://forums.adobe.com/community/download_install_setup/creative_cloud_faq

  • Why can't i select the tools ?

    Hi
    i can't select tools
    in the screenshot i zoom on a wave and tried to move the point on the wave , you can see the red arrow (i added the red arrow because my english sucks)
    and there is a second arrow , on the tool , i can 't select in the waveform
    why?
    i use audition cs5 under w7

    The spot healing brush is designed for use in Spectral Frequency Display mode--click on the tool with the red/orange display at the other end of the tools from the one you want to use and you should get the control you want.
    Beyond that, to get the best out of the tool you'd probably draw around the specific mix of frequency and time you want to "heal" rather to just try to manipulate a single sample.
    Have a play--you can do some pretty amazing things with the spot healing brush.

  • Where is Verizons email for CONTACT?Why can't I select the date to make a payment?

    How come when I pay my Bill with a credit card & Or debit card I cannot chose a date in advance for paynent?  99.99% of the bills I pay online (AT&T included) when I schedule a bill payment with a credit card &/or debit I can schedule payment 2 months to a year in advance. Why not Verizon? Perhaps I wouldn't have any late fees if they had it setup that way? Perhaps that IS why they do so they can get those extra fees? Also why is it so difficult to contact Verizon, why don't they have an email addy? I have an acct with verizon for my Hub and a wireless acct with AT&T. I am looking for a new carrier for my wireless phone & most likely my hub now for I've crossed Verizon off my list  of a new carrier if they make things this difficult on such easy problems. Apparently they don't want to be customer friendly!

    You bill due date is the same date every month. It is not all that difficult to pay on time.
    Set up a monthly notification on your device to pay your bill.

  • Why can I not select the transparency flattener preset option when exporting to a pdf?

    Hi all,
    I have not had to use this option in quite a while so may have forgotten a few things.
    In InDesign, under Edit>Transparency Flattener Presets, I have created a new preset and included the option of converting all text to outlines.
    However, when I try to export to a PDF, the option to select a transparency flattener preset is greyed out.
    Can you tell me what I may be doing wrong? This is driving me crazy!:(
    (There was originally no transparency in the file, so I created some with a white square set to 0.5% opacity).
    Thanks in advance for your help!
    Best regards,
    Christine

    DesignerDave72,
    Thank you SO MUCH!!
    I have been battling with this for over an hour...and it was frustrating me no end. 1 minute into reading the article you suggested and I was home free!! THANK YOU...!! You're my hero!
    Best regards,
    Christine

  • Why can I only select the 'I' beam tool?

    Audition CS6 in Master Collection...I'm new to it so it might be finger trouble on my part, but I'm working on an MP3 file and all I can get is the I beam tool. The others (move, razor, slip, marquee etc.) are visible, but not active. Any ideas?
    Thanks
    Andy

    Yeah I know, I'm talking about clicking on the tool bar at the top left. I've got the I beam cursor. That's it. I cant choose any of the other tools to the left or right of the I beam icon. ('Select' probably wasn't the appropriate word)  Maybe I'll reinstall it. Does that mean I have to reinstall all of Master Collection too? And all my Premiere and Photoshop plugins ?     I'm on Windows 7 Pro 64bit btw

  • Why can't I see the whole PSE organizer screen on iMac?

    PSE 12 was working fine until I tried changing the screen resolution....then I lost half the organiser. I've changed the resolution back...but I still can't see my complete organiser.  I can only see my last bottom 3 albums.  Despite uninstalling and reinstalling the PSE disc. Please please help....

    Stuck Windows in Photoshop Elements on a Mac | Barbara's Sort-of-Tech Blog

  • Why can I not select the 3d rotation tool? HELP!

    I have my object converted to a symbol and I have "created a motion tween" but the 3d rotation tool is greyed out and I cannot use it. Help!

    3D rotation tool is not available in Flash CC 'Canvas' document. Try creating a new file (Flash ActionScript 3.0) and creating movieclip in it.

  • How to select a whole album to play without selecting each track individually in iTunes 12.1.2 for  Mac book pro OS 10.9.5

    The only way that I am able to play a whole album is to select each track to play up next.  This extremely tedious.  There must be some way to select the whole album to play.

    Hello Achates:
    I did not read the rather long post. If you wish to reinstall OS X 10.4, use your software install DVD. Backup is essential. To minimize your risk, I would use an archive and install:
    http://docs.info.apple.com/article.html?artnum=107120
    In that way, you will have a fresh copy of OS X and your current settings will be preserved.
    Incidentally, I do not agree that the printer problem is best solved by reinstalling OS X. I have had HP printers for sometime and, on one occasion, had difficulty after an upgrade. HP technical support walked me through uninstalling all traces of the HP driver and then reinstalling.
    Barry

Maybe you are looking for

  • Wait (ms) - NI KnowledgeBase article example

    I am reading http://digital.ni.com/public.nsf/allkb/12B2EA9AD5B265AD86256257004DD8E2 which is suppose to explain the difference between the Wait (ms) function and the Wait Until Next ms function. I am having a hard time understanding the example give

  • User Exit at VF01

    Hi, I have business requirement, at the time of creation of billing document we need to call another Z Screen for some data selection.  Please anybody can help me which exit availabe to VF01 level and also at  VF01 Conditions level. Regards Goutham

  • CSS - src and dst in the same vlan

    Hi guys, I need LB something like this in routed mode: first data flow: [client]->[vip1-c(css)]->[www1/www2] and second (backend) flow is: [www1/www2]->[vip2-c(css)]->[www3/www4] vip1,2-c = VIP address on client side www1,2,3,4 = all servers are in t

  • Form rights for Reader XI

    The Adobe Acrobat XI SDK Release Notes state, "Beginning Acrobat XI, Form Rights are available to all documents irrespective of whether the documents are Reader extended or not." When I use importXFAData() in the document-level Javascript, everything

  • Ok I am getting different speeds in every program I use (p6n sli)

    Post says one thing, cpu-z, dual core center, and clock gen says another. Which should I trust exactly? I have an e6600, is a 1480 MHz fsb pretty good at stock voltage to start with? Im afraid to go any further, as I am getting a myriad of different