Quicktime and trash

has anyone had this problem in leopard: when quicktime is open, if you click on the trash icon on the dock, the trash wont open. if you log out then log in again, it cures the problem, but this is a pain to do every time. there must be an easier way.

etumak wrote:
pls help,i think i put my codec for quictime into trash unconsciously leading me unable to watch videos and movies that i download,what can i do??thanks...
Download VLC Player
http://www.videolan.org/vlc/download-macosx.html
and avoid using your computer whilst unconscious.
Cheers
Pete

Similar Messages

  • Final Cut, Quicktime, and Pro Tools conflicts

    Hi there,
    I'm working on a "situation" I recently encountered, and wonder if anybody else has had this problem.
    I'm trying to upgrade Pro Tools LE to version 6.9.2 with the install discs that were sent to me from Digidesign, and it's wreaking havoc with Final Cut Pro and Quicktime.
    Initially when I installed the upgrade, I was running OSX 10.4.2, FCP 5.0.3 and QT 7.0.2. The Pro Tools upgrade worked fine, as did FCP when I launched it, but Quicktime wouldn't launch- spinning beachball forevermore.
    So after doing all the basics- trashing pref's and render files, repairing permissions, etc.- and finding QT still wouldn't work, I tried upgrading to QT 7.0.3.
    Once I did that, QT still wouldn't work, and Final Cut Pro would no longer launch. It just hung on the application startup screen, at no particular point each time.
    I then upgraded to FCP 5.0.4, and as well OS 10.4.3. No luck. I installed the Pro Application Support updates 2005-02 1.0, and 3.1, and still no luck.
    Since there is not yet a downgrade from QT 7.0.3 to 7.0.2, I ran the 7.0.2 to 7.0.1 installer, and downgraded to QT 7.0.1. QT still wouldn't launch, and FCP still hung on launch but this time it hung at the point where it was loading audio filters.
    I tried removing the audio filters from their folders to see if it would launch then, but that didn't work. At this point, the only thing I could think to do was to uninstall Pro Tools altogether (safe uninstall, not clean uninstall) and this is what finally brought Quicktime and Final Cut back to life. Great, because I use FCP and QT everday, but I no longer have the use of Pro Tools.
    Throughout this process I made sure to diligenty repair permissions, trash prefs, and restart whenever I made a change.
    So I'm not sure at this point how to get Pro Tools LE 6.9.2, Final Cut Pro 5.0.4, and Quicktime (any version above 7.0) to work harmoniously, and I'm unable to spare any more troubleshooting time for a week or so because there are of course, projects due.
    Has anybody else encountered these oddities?
    Thanks a lot,
    Joni

    Hi, Joni C
    I'm Bump,
    I'm having the same trouble, I have FCP I'm running it on a G5 power Mac dual 2.5 ghz with 2.5 gb of memory, my os is 10.4.4. I also have Quicktime pro 7.0.3 and I have Pro Tools LE 7.0, every time I try to use FCP it starts and about five sec. later it shuts back down. I also have a Universal Audio UAD pci card that runs audio plugins and I also have fxpansion program it converts my vst & Au plugins to rtas for pro tools le. IBefore I installed FCP I wiped my hard drive and re installed a fresh version of tiger 10.4 and then I installed FCP studio, then Pro Tools, then all plugin and kept checking to make sure every thing was working correctly and then the U audio stuff with the Vst to rtas wrapper and it all was working fine. I even did the full final cut tutorial still worked fine. Yesterday out of no where final cut just stop working and still all the other programs work fine like dvd studios, soundtrack, motion, pro tools. If you can shead any light on this I would be very greatful
    Bump

  • Can't Update QuickTime and iPhoto

    When attempting to download and install the latest version of QuickTime and iPhoto via Software Update, I got the error message, "None of the checked updates could be saved. You do not have appropriate access privileges." I have two User Accounts on this Mac, both are Admin accounts, and I've tried updating from both accounts. I've repaired privileges via Disk Utility. Why can't I download these updates?

    Same issue with the QT 7.3 update, I get this message...
    The update “QuickTime” can’t be saved.
    You do not have appropriate access privileges.
    The Installer package has been moved to the Trash. To try again, open the package from the Finder.
    Tried repairing permissions with disk utility, it ran with a few warnings and 3 unexpected ACLs on the private/var/root dirs, but that did not help.
    Had keychain problems when I did the Leopard upgrade, had to reset the root password to fix. Wondering if the problematic Leopard upgrade did some other damage?

  • Unable to capture in FCP, Quicktime and iMovie, camera not recognized.

    I am unable to capture in FCP, Quicktime and iMovie.
    I have been dealing with this problem for quite a while now, and I think I have tried everything posted on these forums regarding this issue. I have been to the Quicktime, iMovie, and this FCP forum looking for the solution. Hopefully someone has a suggestion that I have missed or have not tried yet. I have a Powerbook G4 running OSX Tiger 10.4. I am running Quicktime 7.04, and FCP 4.5.
    My problem is this… I am unable to capture from my Canon ZR-200 Mini DV camera, using Final Cut Pro, iMovie and also Quicktime. FCP says no camera recognized. iMovie says no camera attached, and Quicktime says no recording device found. In FCP, I am using the Firewire Basic setting, and NTSC DV settings. I have captured in FCP with the same camera several times in the past. I think the problem started when I upgraded to OSX 10.4, or one of the Quicktime upgrades.
    Here are the details…
    - Camera is connect via Firewire. I have tried the built in ports, as well as a Firewire Carbus card.
    - OSX recognizes the Canon ZR-200 in the System Profiler, so I know the computer sees the camera.
    - I have tried the camera on a Windows XP machine, and capture works perfectly, so I know the camera is functioning properly in VTR mode.
    - Deleted my FCP pref’s using FCP Rescue.
    - Deleted the Quicktime receipts, and re-installed Quicktime 7.04
    - Reverted back to Quicktime 7.01
    - Set the audio to 44.1 in the the Audio MIDI setup in the Utilities folder
    - Tried the “GarageBand” fix, opening the programing, playing a few notes and closing.
    - I have installed Quicktime using the program “Yank” to completely delete Quicktime and re-install.
    I may have tried more solutions, but these are the fixes that I can recall.
    If anyone has any others suggestions, it would be much appreciated.
    Brent

    Hi Brent:
    Although it looks as if you have tried all of the 'fixes' that are normally suggested here, please read through this Apple Article to see if some obscure thing applies to you.
    iMovie: Cannot see or control camera
    http://docs.info.apple.com/article.html?artnum=43000
    Sue

  • When in mail, i would like to move emails to different folders other than the inbox, sent and trash can a folder be created?

    When in mail i would like to move my emails to a different folder on mail account other than the inbox, sent and trash options, can i  create a new folder?

    The suggestion above is for MailBoxes on the Mac in the mail app and have nothing at all to do with the iPad. I think that you are asking about the iPad mail app.
    You need to have an IMAP email account in order to create additional mailboxes on the iPad.
    If you go to your email account in the Mail app and look at the window where your inbox, trash folder and sent folder are - if there is an Edit button at the top of the window - tap that and then tap Add Mailbox at the bottom.
    If the Edit button is not there - you cannot create folders on the iPad. Your email account is not IMAP. Only IMAP email accounts can create folders on the iPad. Any folders that you would already have in an IMAP account would sync to the device as well.

  • Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

    Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

    @ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
    @ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!) 
    @ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack.  i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot. 
    Thanks fo rall yor help!

  • A "genius" at an Apple store told me to delete the photos from my documents folder and trash them and I would still be able to keep them in iPhoto.  Now I cannot use the photos other than in the iPhoto file. Can this be undone?

    How can I retreive deleted iPhotos which were deleted from the documents and trash files?  I stupidly did this because a "genius" from Apple Store assured me that I would still have access to the photos. 

    Check iPhoto's Advanced preference pane to see if it's set to a referenced or managed library;
    If it's set to a referenced library you photos are gone.
    If that's the case they might be able to be recovered with a file recovery app like   SubrosaSoft FileSalvage.  It will run in demo mode so you can see if it can recover your photos before having to purchase it. Use the iMac as little as possible till them so as not to overwrite them.
    If it's set to a managed library launch iPhoto with the Option+Command keys held down and rebuild the library's databse file.
    What verson of iPhoto and system are you running?
    OT

  • I just got a new computer with Windows 7 and all my songs were transferred to my new computer along with itunes.  But I can't get it to work.  I also tried downloading Quicktime and couldn't get it to download.

    I just bought a new computer and had files transferred along with itunes to the new computer.  I can't get it to work.  It doesn't recognize the extensions for itunes.  I also tried downloading Quicktime and couldn't get it to download.

    iOS: Device not recognized in iTunes for Windows
    I would start with:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.

    I'm running snow leopard. The try to open any .mov file in Quicktime, and I get an error message that says, "The document xyz.mov could not be opened. The movie is not in a format that Quicktime player understands. I'm a recent upgrade to Snow Leopard.
    Help!
    Thanks, Mark

    Unfortunately, the error message gives no details about what codec might be missing or what it needs.
    If the file can't be opened in QT, it only means you cannot use the QT "Inspector" window to check what compression formats were used to create the file. It does not mean you can't use the Finder "Information" window to check on the compression formats or use a third party media information window (e.g., like VLC which will open many compression formats not supported natively by QT) to determine what kind of data is included in the MOV wrapper. If the file cannot be opened in any app, it is usually a good sign that the file itself is corrupted.
    It's a stupid error message. Apple should do better than that.
    Error trapping is quite extensive but there are still many areas which require human oversight. The message is telling you that either the container has a problem (e.g., not properly terminated, non-standard, or corrupted) or that one or more of the compression formats used is not supported by your current codec component configuration or that the data was encoded using non-standard settings or preferences not supported by QT or that the fourCC code does not match the data contained in the file or that there are timecode inconsistencies, etc., etc., etc. In short there are a near infinite number of possible problems for which it would be very difficult/nearly impossible to program error trapping depending on your sourcing of content and how you process it before it reaches the player app. Think of it like trying to play a BD disc in an DVD player.
    I'll call Apple support when I get a chance.
    Chances are good that they will end up sending you back here. In any case, it is often a good idea to post a sample file for examination by other QT users. At the very least, they should be able to tell you if the sample file will play on other systems which would indicate whether or not the file itself is bad and under the best of circumstances whould allow them to examing the file in detail for various common problems.

  • Quicktime and itunes wont install. I have never had quicktime installed on my computer before

    I recently bought an ipod touch 4g and realized that I needed itunes to activate it. After downloading itunes it wouldn't install, no error messages or anything, when I click on the installer it just doesn't do anything.
    After downloading several versions of itunes (older versions) I finally found one that started to install. Then it told me that I need Quicktime on my computer in order for it to install. So I downloaded the latest version of quicktime and had the same problem, when I click on the installer, nothing happens. I tried downloading older versions of quicktime but still had the same problem.
    I have never had quicktime or itunes installed on this computer before, so I know that it isn't an older version of the program hidden in my computer that is preventing the installation from happening.
    My computer is running on Windows 7. I know that there wasn't a problem with downloading the software, the files weren't corrupted or anything. There are no error messages, the software doesn't even partially install. When I click on the installer, nothing happens. I have tried running the programs as an administrator and that doesn't change anything.
    I have tried so many different things, but can't remember everything that I tried. Yesterday I spent nearly 10 hours trying to sort this out because I was determined to get my ipod running. I only stopped when my internet credit ran out and today after buying some more, I am trying again. Please help.

    I appreciate the quick response, thank you for that.
    One thing I did try was windows cleanup utility and searched through the program files for all apple software, but had none. I even deleted the temp files on my computer, and on my internet browser, but nothing happened.
    One thing that I didn't think of was deleting the installation files in my downloads folder, pretty silly of me but I didn't think it would make a difference. I also spent about 2-3gig on downloads yesterday and didn't want to delete the files but as a last resort I did and emptied my recycle bin, then downloaded a fresh copy of Quicktime and finally it installed!
    Now I am in the process of downloading a fresh copy of iTunes, the download hasn't finished yet so I haven't had a chance to install it yet but I have a much better feeling about it this time after deleting all the old installation files from my downloads folder. If Quicktime worked after that, I am sure iTunes will.
    I can't believe it was something so simple as deleting the installation files in my downloads folder and emptying the recycle bin. I had seriously gone through my entire computer looking for any little file that was related to Quicktime or iTunes. I didn't even think of the two most obvious places. I spent so much time and credit downloading multiple files and my computer even got a virus when trying to download a copy from an unauthorized source, I had no problem getting rid of the virus, but struggled with Quicktime and iTunes, that is why I got so frustrated! I feel like an idiot now :-P
    Thank you for your help. I still havent installed iTunes yet, so fingers crossed. I think it will work now though.

  • Quicktime and iTunes "quit unexpectedly" when I try to open them

    I'm getting an error message whenever I try to open either Quicktime or iTunes saying that the application quit unexpectedly. The error report (for both Quicktime and iTunes) says (amongst other things):
    Exception: EXCBADACCESS
    Codes: KERNPROTECTIONFAILURE
    Thread 0 Crashed with PPC thread state 64
    Anyone any ideas? Thanks.

    Please post the crash report here so we can view it and offer help.

  • Mail, App Store, Quicktime and others don't work!

    I downloaded OS X Mavericks but mail crashes every time i open it with my IMac.
    Also App Store, Quicktime and other software don't work.
    I'm really in difficult! Help me please!

    Mmmmm I tried this an it didn't seem to solve my problem, but I think it helped me understand what's going on slightly more than before. I restored my system and files after my HD became corrupted by duping the drive. When I restored everything, it seems there might have been some conflicting problems with the OS and two identical users were created. So now in order to access my personalized settings and what not, I need to unlock my user settings and leave it unlocked for a few hours. This wouldn't be a problem if my MBP didn't give me kernal panics every time I run Safari or some general application for more than 10 minutes. I'm going to declare AppleCare as it's been under 3 years, but want to wait before my replacement iMac comes. Thank you for your help.

  • HT1430 I can't see my send or my folders in mail on my I phone 4. All I see is Inbox and trash

    I cannot see my send folder or my mail folders on I phone 4 . I can only see Inbox and Trash. I used to see all ut they now went away and I can not figure how to fix it.  I do not know ny operating sytem . I only have had my ohone one week so still learning

    With the site on display, click on the site identity button (for details on what that is see [https://support.mozilla.com/kb/Site+Identity+Button]) and then on More Information. This will open up the page info dialog.
    First select the Permissions panel, make sure that "Load Images" is set to allow (selecting Use Default should also work)
    Next select the Media panel, then click on the first item in the list. Use the down arrow key to scroll through the list. If any item has the option "Block images from (domain name)" selected, de-select the option.
    This should hopefully resolve your issue, but also see https://support.mozilla.com/kb/Images+or+animations+do+not+show
    Some add-ons can also block images, for example if you have AdBlock Plus installed, make sure that you have not accidentally created a filter to block the images.

  • How can I locate, uninstall Quicktime and iTunes in order to reinstall?

    Installed iTunes and Quicktime and bought music. Then tried to access a couple of week later. From iTunes got message 'the feature you are trying to use is on a network resource that is unavailable'. Quicktime says 'Error 46: could not load or find the QT ActiveX control'. I can't access them through Add/Remove Programs, so can't uninstall or update. Any advice or suggestions would be greatly appreciated.
    DELL   Windows XP  

    I've installed and run Win Install Cleanup. Have tried reinstalling iTunes and QT a couple of times. Both times, the status bar freezes at four 'blocks' from the end, with the message 'Registering iTunes automation server'. The Task Manager says the installer's status is Running, so I don't know what to do, other than uninstall as best I can and start the process again. Could it be that the Security Center is preventing it from completing the installation? Any suggestions gratefully received.
    DELL   Windows XP  

  • With the new i0s7 update I can't delete the mail in my inbox all at once.  I see there is the edit which allows you to mark all and to the right of that is MOVE and TRASH, why when you mark all you can't access these two options?

    In the new ios7 update, why can't you mark all your messages in the inbox all at once?  The EDIT tab lets you Mark All and off to the right is greyed out "move" and "trash", why can't you Select all and then press TRASH.  It only lets you mark them as Flag, or mark as read.  This *****!

    Hi Scottay777,
    Per pg 52 of the iOS7 User Manual, what you describe should be possible:
    Delete, move, or mark multiple messages. While viewing a list of messages, tap Edit. Select some messages or tap Mark All, then choose an action. If you make a mistake, shake iPhone immediately to undo.
    iPhone User Guide - For iOS 7 Software
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
    If a button isn't responding correctly in Mail, you may want to try forcing it to close and then relaunch it. You may find the following article helpful:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Regards,
    - Brenden

Maybe you are looking for