Quicktime AVI cannot open

I am trying to run some small videos that are quicktime.AVI type. However, every time I try I get an error mesasage that says "Error Opening Movie" - cannot open movie?
How can I fix this?
Steve

"how do you repair permissions? "
Save and/or quit your applications & doucuments
Go to Applications>Utilities Folder
Click Disk Utility
Click the Volumn (HD) that you want to check.
Click the Repair Disk Permissions button. (Don't worry about verifying)
At the bottom of window when the repairs have finished, you will see the “most important thing”:
Permission Repairs Complete
The previliges have been repaired or completed on the selected volumn.
Restart your computer.
See Knowlege Base Articles:
http://docs.info.apple.com/article.html?artnum=106214 Using Disk Utility and fsck to resolve startup issues or perform disk maintenance
http://docs.info.apple.com/article.html?artnum=25751 About Disk Utility's Repair Disk Permissions feature
TIP-You should Repair Permissions:
After installing and/or updating an OS (Operating System).
After installing software.

Similar Messages

  • IMAQ Create for compressed .avi - cannot open the new file afterwards with IMAQ Open

    Hi there,
    i hope i'm in the right board.
    I recently tried to compress avi-files i collected from various cameras throughout the last years.
    At first i used VDub and ffdshow with a FFVH codec - it worked fine as long as i won't try to open the compressed avi using IMAQ Open.
    I googled a bit and read a lot in these forums, tried several solutions - none of them worked.
    So i gave it a last, let's call it fail-proof, try:
    I took the original .avi (uncompressed, openable with IMAQ Open) and used my newly gained knowledge to use LV for the compression work, i chose from IMAQ AVI Get Filter Names the ffdshow Video Codec and built a small read-write for-loop to convert the AVI frame for frame.
    All worked fine despite the problem, that i still cannot open the compressed file in IMAQ Open - and i do not know why.
    I would be glad to force labview to decode and open the compressed file with a certain codec, but i found no option for this.
    Thanks in advance
    Markus
    P.S.
    I'm using LabView 2010 and VAS of 02/2014.

    Hello Markus,
    have you had a look at this:
    Writing a Compressed AVI File with the IMAQ Vision Acquisition Software
    Compressing avi files-Discussion Forums
    Regards,
    eletra

  • Quicktime x cannot open mkv file with perian installed

    I just installed Lion and found out that the quicktime x is not so good as it is in Snowleopard that even though I install the latest perian, I cannot play the mkv file via Quicktime X now. Does anyone have any solution?Thanks a lot.

    Install QuickTime Player version 7.6.6 and use it instead of X.
    http://support.apple.com/kb/DL923

  • QuickTime Player cannot open files in the "data" format.

    The title above is an exact clip from error message rcvd when quicktime loads after clicking on a web hyperlink.  I enjoy the simplicity of a mac and don't like having to make things work smoothly myself.  
    The error as quoted doesn't show up when searching the quicktime section of this forum, so I'm contributing it for all the other users who experience the same show-stopper and will appreciate a solution that doesn't require too much more than just Apple>Software update, or some similar scenario.
    p.s. I saw some solution mentioning components out of date.  I have no idea, nor wish to know about these.  Hope I don't have to go there! 
    version 10.0
    OS 10.6.7 System Version: Mac OS X 10.6.7 (10J869)
      Kernel Version: Darwin 10.7.0

    NjoyAmac wrote:
    Well, now that we both figured out it was a windows file I wonder about
    why not just install the windows player for mac
    why pay for the flip program just for occasional viewing
    how would we have known of the .wma file extension had I not done the text display of the link
    1. There isn't a window player for the MAC.
    2. Flip4Mac playback plugin is a free download... I hope you didn't buy Flip4Mac.
    3. We wouldn't....
    iMac 27", 3.4GHz Quad-Core Intel Core i7, 16GB 1333MHz DDR3, 2TB HD + 256GB SSD, AMD Radeon HD 6970M 2GB GDDR5•FCS 3•OS X 10.6.7•iPad 1&2•Apple Tv 2

  • HT3775 I recently upgraded my OS to Mountain Lion 10.8.2 and cannot open up .avi files now in Quicktime. I get this error message: The document "ANDREW_McD_MEDIA_VERSION.avi" could not be opened. A required codec isn't available.

    I recently upgraded my OS to Mountain Lion 10.8.2 and cannot open up .avi files now in Quicktime. These same files opened up with no problem prior to my upgrade.  Additionally, I had upgraded to the Pro version of Quicktime recently, but it appears I've retrograded back to the basic version, unexplainably.
    I get this error message: The document “ANDREW_McD_MEDIA_VERSION.avi” could not be opened. A required codec isn't available.

    Hi,
    I had exactly the same problem & found the answer here  https://discussions.apple.com/thread/3219982?start=0&tstart=0 . Download a program called Perian, very easy to download worked a treat. I wish all fixes were this easy - Debbie

  • HT3775 cannot open avi file with quicktime pro7

    I cannot open avi file with quicktime pro 7

    VideoLAN - Download official VLC media player for Mac OS X

  • Macbook pro cannot open .avi files

    I have just bought this Macbook Pro and have found that Quicktime cannot open either .avi or mp4 videos. I downloaded RealPlayer for Mac - it plays .avi video sound but shows no picture. What can I do to correct these faults?

    Get VLC http://www.videolan.org/vlc/download-macosx.html the intel based 64 bit one.

  • Error: File "x.avi" cannot be opened (86::1)

    I've started using a new camera to record some footage and it saves videos in an .avi format with the H.264 codec.
    Everytime I try to import footage from the camera I get an error message saying 'After Effects error: File "X.avi" cannot be opened, it may be in an unsupported format ( 86::1 ).
    I use After Effects CC and this problem has never occured before. I have tried videos with both 1920x1080 and 1280x720 resolutions and the error still comes up. Converting the footage to another format works but slightly lowers the frame rate and sometimes messes up audio.
    Please Help

    Todd_Kopriva wrote:
    Can you play these .avi movies with this H.264 variant using media players on your computer, such as QuickTime Player or Windows Media Player?
    I can play them on all media players except from Quicktime which doesn't usually support AVI playback.

  • HT1338 I cannot open itunes. When I try, a popup says I need quicktime 7.5.5 but I cannot download it. Can someone help??

    I cannot open itunes. When I try, a popup says I need quicktime 7.5.5 but I cannot download it. Can someone help??

    Quicktime 7.5.5 can be downloaded from this link.
    http://support.apple.com/downloads/#quicktime

  • I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet. I get a dialogue box saying the QuickTime plugin has failed. I have tried to download the latest plugin but this doesn't work. Can anyone help?

    I have just upgraded to OSX 10.6.8 and now I cannot open or save PDF files from the internet using either Safari or Firefox. I get a dialogue box saying the QuickTime plugin has failed. Can anyone help?

    Is this what you downloaded: iTunes 10.7?
    When the update fails what if any error report do you get, specifically? Please do this before trying again:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • Hello! I used QuickTime for watch any videos on OS X Mountain Lion, but now, I'm passed to OS X Mavericks and QuickTime, when I open an .avi file, convert this in a .mov file. I'm sorry for my English, I'm French and I don't know speak English very well,

    Hello! I used QuickTime for watch any videos on OS X Mountain Lion, but now, I'm passed to OS X Mavericks and QuickTime, when I open an .avi file, convert this in a .mov file. I'm sorry for my English, I'm French and I don't know speak English very well, but what can I do for QuickTime opens on .avi and doesn't convert to .mov?

    HI GalaxieMusique,
    I'm french too, but I'm going to write this post in english so that everyone may understand it
    I have the same problem in Mavericks, but I'd say, more important, with QuickLook.
    Indeed Quicklook can't read avi movies anymore. Actually it always been the case, but with Perian we were able to fix it. The problem is that Perian is no longer available for Mac OS 10.9....
    I'd assume that our only hope is Apple themselves... It would be nice from Apple to creat an add-on for quicklook to be able to preview the avi movies.
    In regards with quicktime, you can download QuickTime 7 here:
    http://www.01net.com/telecharger/windows/Multimedia/lecteurs_video_dvd/fiches/10 0.html
    and ask all the .avi movies to be played by QuickTime 7 and not QuickTime X (included into Mac OS).
    Sorry for the english, we french people can make mistakes sometimes
    If anyone has a solution for QuickLook, please do not hesitate. This topic is becoming a real mess....

  • I just recently did a reinstall on my mac, i tried to open itunes, but there is an error message that says itunes requires quick time 7.5.5 or later, i have tried to update quicktime, but cannot.  please help :)

    i just recently did a reinstall on my mac, i tried to open itunes, but there is an error message that says itunes requires quick time 7.5.5 or later, i have tried to update quicktime, but cannot.  please help

    Just FYI
    QuickTime 7.7 for Leopard - http://support.apple.com/kb/dl761
    http://support.apple.com/kb/DL27 <-- Quicktime 7.5.5

  • HT204382 MAC PRO10.6.8 just downloaded file sent  5/2010 "BoogieWoogie" (4-wmv) I could play it then, but now it says I cannot open because its not in a format that Quicktime Player understands that I have to install addit'l software to open this type of

    MAC PRO10.6.8 just downloaded file sent  5/2010 "BoogieWoogie" (1-wmv) I could play it then, but now it says I cannot open because its not in a format that Quicktime Player understands that I have to install addit'l software to open this type of file??? WHAT software and WHERE do I find it to download?
    calico6

    Free VLC player for the Mac, check out the Icecast Radio Directory also
    http://www.videolan.org/vlc/download-macosx.html
    And if it's copy protected then
    http://www.telestream.net/flip4mac/
    If anyone is running 10.8. or later, then they might have to right or control click on the installer or app to "Open" to bypass Gatekeeper controls at least once, then it learns it's a ok to be trusted program.

  • I cannot view video clips in iphoto. quicktime used to open automatically but no longer

    I cannot view video clips I created and syncd from my iphone into iphoto.  Quicktime used to open automatically.  Now it wont for some reason.

    If you have iPhoto 8 and Lion then download and install QuickTime Player 7 for Mac OS X v10.6.3 or later.  That should let you view clips in the iPhoto library.
    OT

  • I have Aperture3 and iPhoto.  When I try send video clips as attachments, I get a message saying Quicktime can't open the .avi - why?

    I have Aperture3 and iPhoto.  When I try send video clips as attachments, I get a message saying Quicktime can't open the .avi - why?  Others couldn't open them so I sent them to myself and get the same message.  Doesn't seem to be a size issue as I've tried with really short clips (4 seconds).  As I recall, I didn't have this problem before buying Aperture last fall, when I only had iPhoto.  It appears that by default, an attachment to an email automatically comes from my iPhoto files and not Aperture - assume that is supposed to happen but not sure.  Thanks for any and all help!
    Jim

      When I try send video clips as attachments, I get a message saying Quicktime can't open the .avi - why?
    How are you tryin to send the .AVI file? Are you sending the attachment directly from Mail or from Aperture or iPhoto?

Maybe you are looking for

  • Problem with loading a project from other system

    Hi! I am tring to load a project that being done on logic with audiowerk card on other computer. I can open the project but when I am choosing a channel and changing the sound-card name to my card (core audio) I can hear the sund but all the plug-ins

  • Nokia N73 Camera problems

    Thanks alot Edward. I tried removing the battery but it didn't work out. Then I put the code and it worked. Thanks a lot. I appreciate it. !!!OHOO!!!

  • Will Pages work with MacBook Pro OS Snow Leopard 10.6.8?

    I am wondering if the Pages App will work with MacBook Pro OS Snow Leopard 10.6.8.  I am getting conflicting information from people, and I don't want to purchase and download the App if I am not able to use it.  Thanks for your help.

  • Trial version not working

    Hello to all! We downloaded the trial version of SunONE Identity Server for Windows 2000 from this web site. We installed it with default options (with new directory server). After installation we are unable to log into amconsole. Interner Explorer j

  • Podcasts showing up as saved when they are not on my computer

    I have a daily podcast I listen to.  I set the settings to delete all played episodes, and this seems to successfully happen.  When I sync my iPod touch to my computer (via USB; I never sync over WIFI), two old episodes show up under the "saved" tab.