QuickTime Can't Read Movie I Exported From iMovie

QuickTime is telling me it can't read a movie I exported using iMovie. The movie is saved as a .mp4 which I have used QuickTime to read in the past. Any suggestions?
Thanks

In the Videos App. That is where downloaded movies appear and that is where you play them - not in iTunes.

Similar Messages

  • How to sync sound with movie when exporting from iMovie

    i have problems with sound synchronization with movie. mostly is movie delayed few seconds behind sound. also sound is repeatedly missing - under certain frequency. videos are prepared in iMac iMovie and exported in to the file and stored on synology. how to fix this trouble before exporting from iMovie?
    playing movie on imac works without problem

    I have a collection of Apple Support documents about passwords, some of which might be of help ...
    iOS: Forgot Passcode or Device Disabled
    http://support.apple.com/kb/ht1212
    iOS Passcodes
    http://support.apple.com/kb/ht4113
    Find My iPhone, iPad, iPod a Touch or Mac
    https://www.apple.com/support/icloud/find-my-device/
    Find My iPhone Activation Lock
    http://support.apple.com/kb/HT5818
    Find My iPhone Activation Lock: Removing a Device from a Previous Owner's Account
    http://support.apple.com/kb/ts4515
    Apple release Tool to check the Activation Lock Status of iOS Devices
    http://www.idownloadblog.com/2014/10/01/activation-lock-status-check/

  • No sound in movie when exported from iMovie

    I have made movie in imovie, exported it to garageband to add music then when i export it to idvd there is no music but there is the video sound, can you tell me what i am doing wrong!
    thank you

    Welcome to the forums, Alison.
    I'm not a GarageBand user, but couldn't you export the GB audio tracks as a Quicktime file, and then import that audio track into iMovie? If it's combined in iMovie, then it should import into iDVD without a conceptual hitch.
    John

  • How can I tell if the quicktime movie I export from Final Cut Express through Quicktime to IDVD is anamorphic

    How can I tell if the quicktime movie I export from Final Cut Express through Quicktime to IDVD is anamorphic

    Find the Seuence icon in the Browser that corresponds to the Timeline.
    Right click the Sequence icon in the Browser.
    Select Item Properties.
    All info is revealed.
    Al

  • How do I export from IMovie when "not enough room in Heap Zone" error code appears?   How can I correct,  what to Do.."export movie" insteand of Media browser or IDVD?  Finalize movie?  I want to burn it to DVD!

    How do I export from IMovie to Wondershare Creator to Make DVD and share hour long movie when I am unable to "publish" movie on Media Browser of IDVD because the error code "not enough room in heap Zone/ " appears and function is aborted. 
    I shortened the movie, that is no cure...Correcting date info on clips does not pertain.  Why would Apple throw roadblocks in your way without solving problems they create?
    A techie made an appointment on the phone and was totally incapable of addressing the problem.
    What is a heap zone????

    Instead of Share to Media Browser, what happens if you try Share Menu > Export Movie... (choose Large size) and save it to the Desktop?
    If that fails try Share Menu > Export using QuickTime...
    Then pick Movie to QuickTime Movie, then click on Options... which is just to the right of Export
    Under the Video section click on Settings...
    Then in the pulldown menu at the top, titled Compression Type: Choose Apple Intermediate Codec. Then click OK. And click OK again, and save it to the desktop. Once the .mov file is created, you can import that into iDVD and most likely it will work in Wondershare Creator if you prefer to use that instead.

  • Aspect ratio issues in iDVD with mov files exported from FCE

    Please help. I believe this is an iDVD bug. I have found some relevant discussion of it on online forums - but have not found a solution that works for me. I am looking for a workaround.
    http://discussions.apple.com/thread.jspa?threadID=1356500&tstart=31
    PROBLEM STATEMENT:
    My 4:3 movies, exported from FCE in QT-with-conversion formats (any 4:3 format) - appear in iDVD with gray side-pillars (as expected for 4:3) AND with a black line (letter-boxing) at top and bottom - as would be for 16:9. It appears the aspect ratio is also distorted i.e. 16:9. (The iDVD project is set to 4:3.)
    1- A 4:3 mov file exported from FCE using Quicktime Movie format (no conversion) does not have the problem, but I cannot de-interlace the video using this export mode.
    2) A 4:3 mov file exported using QT-with-conversion mode (any 4:3 format) DOES have the problem. I need to use this mode in order to get de-interlace.
    (Exception: 640x480 VGA mode does not have the black lines, and it displays correctly in dvd player on my computer screen - but on the TV screen, it crops content from the top and bottom of the movie, so this is not an option.)
    3) In Finder, if you click on mov file exported QT-only (no conversion), it opens in the FCE viewer. If you click on mov file exported in any other 4:3 mode, it opens in Quicktime viewer (i.e. there is absolutely something different in the header/ID of these files.)
    4) All mov files, regardless of export mode, show correctly in Quicktime viewer - no black line, no distortion. The problem does not occur outside of iDvd.
    5) I tried passing the QT-with-conversion mov files through an Inverse-Anamorphicizer (per suggestion on forum - this apparently fixed the problem for some people) but the resulting output mov (i.e. the inverted product) still had the same problem.
    I am, so far, left with this trade-off: Give up the de-interlacing, or live with the letter-boxing/ distortion. Neither is acceptable.
    I am looking for a workaround:
    1) A way to export de-interlaced 4:3 mov from FCE that shows in correct ratio in iDVD
    2) A way to "convert" / re-head mov file after exported so that it displays corrrectly (inverse-anamorphicize) so that iDVD reads it correctly
    3) Can the mov be de-interlaced after the fact (so I could use QT export without conversion)?
    4) Something besides iDVD to put this together - that doesn't have this problem? (I like and want to use the iDVD menu/theme.)
    5) Other?????
    I also notice that all the QT-with-conversion mov files are 1/3 to 1/2 the size of the QT-only mov file, which is valuable and preferable to me. (I don't see any quality difference in the display...)

    In the Preview window > top frame > middle button
    do you have correct for pixel aspect ratio checked or not?
    !http://i533.photobucket.com/albums/ee340/gogiangigo/Picture1-4.png!

  • How do I produce the highest quality DVD from MOV exported from iMovie

    What is the best method in iDVD11 for burning to DVD, an imported HD 720p or HD 1080p MOV file exported from iMovie11?
    I have successfully exported a 5.5GB (66min) HD 720p MOV file from iMovie. I then used iDVD to import this MOV file and burn it to DVD. When I played the DVD the quality was nowhere near that of the imported HD 720p MOV file as played on QuickTime. The DVD also shows captions at the edge of the 16:9 TV screen instead of further inside as per the QuickTime screening of the HD 720p MOV file.
    How can I improve quality and maintain borders in iDVD for the DVD output?

    Hi
    How can I improve quality and maintain borders in iDVD for the DVD output?
    Quality.
    • Use iMovie up to HD6 or FinalCut - as iMovie'08 or 09 or 11 - just delivers every second line to iDVD = less resolution
    • There are no HD-DVD in real life - DVD is as standard SD-Video
    • If You must use iMovie'11 then do not use "Share to iDVD" BUT "Share to Media Browser" and as Large (Not HD or other resolution - as result will suffers)
    Border
    • May be turning on TV-Safe area in iDVD can help a bit. ?
    • If this is IMPORTANT - Then You have to re-do Your movie in FinalCut and here turn on TV-Safe area and shrink the movie area to within this. Now it will show all on an old CRT-TV - but with a black frame due to that no two CRT-TVs show exactly the same area and then TV-Safe must be less than this.
    My - Un-specific notes on DVD-Quality. If You are interested.
    DVD quality
    1. iDVD 08, 09 & 11 has three levels of qualities. (vers 7.0.1, 7,0.4 & 7.1.1)
       iDVD 6 has the two last ones
    • Professional Quality (movies + menus up to 120 min.) - BEST
    • Best Performances (movies + menus  less than 60 min.) - High quality on final DVD
    • High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) (movies + menus up to 120 min.) - slightly lower quality than above
    About double on DL DVDs.
    2.Video from
    • FCE/P - Export out as full quality QuickTime.mov (not self-containing, no QT-conversion)
    • iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
    when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
    • iMovie’08 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
    3. I use Roxio Toast™ to make an as slow burn as possibly eg x1 (in iDVD’08 or 09  this can also be set)
    This can also be done with Apple’s Disk Utilities application.
    4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
    use an external one as scratch disk (if it is not start-up disc).
    5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
    6. I use DVD-R (no +R or +/-RW)
    7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
    8. Don’t burn more than three DVD at a time - but let the laser cool off for a while before next batch.
    iDVD quality also depends on.
    • DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
    deliver anything better that this.
    HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
    These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-layer.
    Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
    _ Roxio Toast™ 10 Pro incl BD-component
    _ BD disks and burner if full length movies are to be stored
    _ BD-Player or PlayStation3 - to be able to playback
    The BD-encoded DVDs can be playbacked IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
    Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
    • HOW much free space is there on Your internal (start-up) hard disk. Go for approx 25Gb.
    less than 5Gb and Your result will most probably not play.
    • How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
    • Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
    • Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
    iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
    • What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
    other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
    Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
    strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
    Convert to .aiff first and use this in movie project
    • What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
    (If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
    (Dropping a PAL movie into a NTSC iDVD project
    (US) NTSC DVDs most often are playable in EU
    (EU) PAL DVDs most often needs to be converted to play in US
    UNLESS. They are playbacked by a Mac - then You need not to care
    • What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
    • How You encode and burn it. Two settings prior iDVD’08 or 09
    Pro Quality (only in iDVD 08 & 09)
    Best / High Quality (not always - most often not)
    Best / High Performances (most often my choice before Pro Quality)
    1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
    (x4 by some and may be even better)
    2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
    Region codes.
    iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
    DVD Studio pro can set Region codes.
    1 = US
    2 = EU
    unclemano wrote
    What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
    I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
    I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
    For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
    TO GET IT TO WORK SLIGHTLY FASTER
    • Minimum of 25Gb free space on Start-Up hard disk
    • No other programs running in BackGround eg EnergySaver
    • Don’t let HD spinn down or be turned off (in EnergySave)
    • Move hard disks that are not to be used to Trash - To be disconnected/turned off
    • Goto Spotlight and set the rest of them under Integrity (not to be scanned)
    • Set screensaver to a folder without any photo - then make an active corner (up right for me) and set
    pointer to this - turns on screen saver - to show that it has nothing to show
    Yours Bengt W

  • Changing frame rate when exporting from iMovie '09 using quicktime has no impact on duration.  Why?

    Changing frame rate when exporting from iMovie '09 using quicktime has no impact on duration.  Why?
    I have a file created by digitizing an 8mm film at a rate of 24 fps. I would like to create a downloaded movie at a frame rate of 15 fps.  The Export using Quicktime option seems to provide that capability but the resulting file has the same duration as the original 24 fps file.  How can I get the exported movie to be slowed down?

    joegez,
    There is a feature you can use to slow down the video. In the project, move the mouse pointer over the clip, then click the gear icon. That brings up the Inspector. Click the Clip tab. Then you will see a feature there called Speed. Move the slider to the left to slow down the clip. Or you can enter a percentage in the box on the right.
    Hope this solves the problem for you.

  • Why won't .MOV files export from Lightroom?

    Why won't .MOV files export from Lightroom?

    The will.
    Or at least they can, and do, sometimes, if you have good MOV karma..
    Why not supply a little more info, like:
    * Which OS
    * Which version of Lightroom
    * History of MOV files.
    * Export format.
    * Do other video types export OK
    * How many different MOV files have you tried - all with the same history?
    and of course:
    * What, exactly, happens, when you try?
    Rob.

  • When I try to export from iMovie '11 I get repeated messages that the project is too big. Why? Is there a workaround? (I have already cut a 40-minute movie into three chunks...)

    When I try to export from iMovie '11 I get repeated messages that the project is too big. Why? Is there a workaround? (I have already cut a 40-minute movie into three chunks... the first exported to iDVD ok, but the next one of 15 minutes balked for the same reason -- too long...)

    I wish I had a mac :-P 
    Sadly, this is Windows machine so I dont have a non-iOS version of iMovie.  I have 2 ideas left.  The first is xfering the project to my iPhone 4 and trying to export it there (if that works, awesome but geez apple the iPad 2 is way more powerful than the iphone 4.. youd think I wouldnt even have to attempt this).  The 2nd idea is to start at the end of my movie and delete clips and sounds backwards, trying to export each time to find whatever clip is causing the issue (when the movie was 5 minutes it mixed no probem, so I only need to go that far).
    Wish me luck? 
    Also, is anyone else besides me and the 5 dudes in the other threads having this issue??  Speak up, guys - Apple cant a fix a problem they dont know about.

  • I can not get movies to transfere from computer to IPad

    I can not get movies to transfere from my computer to my IPad,  I am using Window 7 64 byt and have down loaded the lastest version of Itunes from Itunes.  It will act like it is getting ready to sync (just like it did in the past) and then it stops

    johnny5trooper wrote:
    Ok, I searched system profiler and opened it up and I see the word firewire listed but that's all. I honestly have no idea what this is supposed to look like or what I should be looking for. Thanks again.
    Did you click on the Firewire word? What do see to the right of it?
    If you see something like the picture and nothing below the "Maximum speed" line, then the camera is not being "seen" by your mac. Otherwise a description of the camera should appear in the right pane.

  • How can I get a higher quality export from Imovie - QT & iDVD came out bad

    The playback on my imovie came out corrupted but it transferred ok to Quick Time and I also burned a DVD but the quality is not very good. Any suggestions on how to get a better version. Please keep in mind that the imovie file is huge - 29Gig and the QT file compressed it down to 350Megs. The whole movie is running around 43 minutes. Any suggesstions are appreciated.
    iMac   Mac OS X (10.4.6)  

    sorry, dogma, but you compressed your project by a
    factor of 1:100, and complain quality... ? did you
    use a preset of iM, or did you select any "Expert
    Options"?
    and hopefully, you didn't try to use that crunched
    file for usage in iDVD??
    store/save you project in your Movies Folder, launch
    iDVD, select from the media bin your project - done.
    last questions: is your project set as "mpeg4" or
    "dv/NTSC"; did you import from miniDV (what iM is
    made for...) or did you use any.. other formats?
    happy holidays
    Hi - Yep I did use the crunched version for the dvd and have tossed it. I am now transferring a new version from imovie to QT under the pre set of high quality. Since this is the first time I have done a movie I am not sure what settings I would use under expert options - suggestions? I would love to tranfer the imovie right to idvd but at the moment I only have 8G left on my Mac so this would likely be a problem. The movie was exported from a mini DV.

  • Why can't I move a folder from contacts to the mail address line?

    Why can't I move a folder from Contacts to the address line in mail?

    If all of the contacts don't get moved into the address field(s), it's possible that some of the contacts in a Group contain  information but not email addresses for those individuals.
    Don't really know what else to suggest except, possibly, that you delete, then re-create the problem Groups.

  • Audio drops when movie exported from iMovie into iDVD

    Hi there,
    I am a problem which I can't seem to fix.
    I have created a 7 minute long slideshow in imovie with MP3 files from iTtunes embedded. The video and audio are fine when exported as a MOV file (and within iMovie itself). But when exported into iDVD for burning, the audio drops out completely after 3 and a half minutes.
    I've tried updating iMovie, iDVD etc., deleting encoded assets as it says to do here: http://support.apple.com/kb/TA24043?viewlocale=en_US
    to no avail.
    Does anyone have any tips? My friend's wedding is on Saturday!
    Thanks so much.
    RR

    Hi
    A. I do not use "Share to iDVD" - BUT "Share to Media Browser" and as Large (not HD or other res.) - Works much better.
    B. When did it hang ?
    a. On Export from iMovie to iDVD
    b. When DVD is played on DVD-Player
    If last one - then
    • What brand of DVD did You use (Yes it matters)
    • What type of DVD
    • Free Space on Start-Up hard disk - How much
    • Burn speed - did You set down this - I do to x2 or x4
    Yours Bengt W

  • Why can I not move songs/playlist from my iPhone5 to my iTunes on new laptop?

    why can't I move songs/playlist from my iPhone5 to my iTunes on new laptop?

    The sync is one way - computer to iphone.  The exception is itunes purchases:  File>Devices>Transfer Purchases
    Copy everything from your old computer, or your backup copy of your old computer, to your new one.

Maybe you are looking for