QUICKTIME; CAN'T UNINSTALL OLDER V; AND CAN'T INSTALL NEW V

I get error message when trying to install Quicktime - can't uninstall older version.  Contact support.  Quicktime does not show up in add/remove programs or in explorer.

It's gotta be in here
http://discussions.apple.com/thread.jspa?threadID=2096581&tstart=15

Similar Messages

  • In setup wizard it says "Your computer must be restarted to complete a previous uninstall. Do you want to reboot now?" after uninstalling old version and trying to install new. I CAN NOT run ANY version now......HELP

    I had an old version of Firefox and uninstalled it. Then I installed the 5.0 version. BUT, in the setup wizard it says "Your computer must be restarted to complete a previous uninstall of Firefox. Do you want to reboot now?" I choose "YES" and the computer reboots, but when I run the setup wizard again, it says the same thing. I have reinstalled it 8 times, and it says the same thing......I have searched my computer for it, and can't find what it's talking about!! HELP!!!!!!

    Cor-el:
    Thanks so much for your help, it is very much appreciated.

  • I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi.  I have searxhed evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason.

    I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi.  I have searched evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason. I can't upgrade for my icloud account.

    Try the following steps:
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

  • Can't uninstall older verion of itunes

    can't uninstall older verion of itunes

    Hey fop0016,
    Thanks for using Apple Support Communities.
    It looks like you have had trouble uninstalling iTunes. This article explains how to uninstall iTunes.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/ht1923
    Have a nice day,
    Mario

  • I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?

    I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?

    Apple changed MobileMe to iCloud and then restricted iCloud to 10.7 users only unfortunately
    If your machine is a 64 bit processor Intel Mac you can upgrade to 10.7 for $29, however a lot of your 10.5/10.6/Rosetta based software could cease to function, especially third party hardware drivers for printers, fax machines, all-in-ones, scanners etc.
    http://roaringapps.com/apps:table
    Also depending how old the machine is, if it can accept 4GB of RAM (preferred), older video card, may not run 10.7 very well or stable.
    My advice is to keep at 10.6.8, get a web based email service that's plaform/hardware neutral, forward your iPhone emails there. Gmail/Yahoo Mail for instance.
    When your ready for new hardware and all new software, then buy a new machine.
    If your going to go to 10.7 on your present hardware, I advise you clone 10.6.8 to a external drive first, that way you can c boot off the 10.6 disk erase the drive completely (necessary to remove hidden Lion Recovery Partition) and option boot off the 10.6.8 clone and reverse clone.
    http://www.bombich.com/get_ready_for_lion.html

  • How can I uninstall iDVD '08 and install iDVD '06?

    There's a reported bug among iDVD '08 users where burning
    large projects are resulting in audio synch problems near the
    end of the burned DVD.
    In other words, the audio slowly goes out of synch towards the
    end of burned projects.
    This is a problem inherent with 'DVD '08.
    I tried uninstalling iDVD '08 and replacing with '06 but it doesn't
    work. You try that and iDVD will not launch at all.
    Even tried to partition my drive and install iLife '06 to the partition
    but the system will not let me.
    Anyone have a solution how to completely uninstall iLife '08
    components and install iLife '06?
    Thanks

    I upgraded to iLife 08 from 06 (bad move). I couldn't install iMovie because my Mac is too old (must be Intel-based or comparable). iDVD didn't work--the document window was always black, even with a theme selected. The Virtual Band function in GarageBand did nothing whatsoever. I trashed the '08 applications, moved all Preferences files to my desktop, reinstalled iLife '06. Now, iDVD won't launch--just flashes the menu bar and exits back to the Finder. So, I have several DVD projects on my system that I cannot finish because I cannot reinstall iLife '06 (like the originator of this problem, "How can I uninstall iDVD '08 and install iDVD '06?") I hope someone has an answer as this is frustrating and costly to my small business.

  • Older ipod and can't use screen for selections

    I have tried number time to reboot my older ipod and can't get it to where the screen will react to touch
    rebooting doesn
    t seem to help

    Hi mikecpk,
    I recommend doing the troubleshooting assistant for your specific iPod from this page:
    iPod Troubleshooting Assistants
    http://www.apple.com/support/ipod/five_rs/
    Take care!
    - Ari

  • I get the message lightroom 5.5 is availeble, i downloaded it, but i always get the error, lightroon.msi is missing, fault 1714, can not uninstall 5.5 ( and i just want to install that ??? )

    i get the message lightroom V5.5 is availeble, i downloaded it, but i always get the error, lightroon.msi is missing, fault 1714, can not uninstall V5.5 ( and i just want to install that ??? )

    Lightroom 4.2 Installation Issue

  • Can I uninstall version 9 and put back version 8 ?

    I upgraded to version 9 of itunes but I don't like it, I liked the old show by genre on home page instead of the new itunes peddling particular artist and albums. Can I uninstall version 9 and put back version 8 ? does this matter to my iphone ?

    You can go back to version 8, but it isn't easy. iTunes 9 has already upgraded your library and you'll have to find your backup library to use with iTunes 8.
    I have found that the iTunes 9 store interface offers some advantages, but it takes some exploring to find everything. You can use the down arrows that appear as you mouse over each category at the top of the iTunes store home page to display whatever you like. For example, display a page of only music in a particular genre:
    Here is a tutorial in using the iTunes 9 store: http://www.apple.com/itunes/how-to/#video-explore
    If you really want to go back to iTunes 8, see this thread: http://discussions.apple.com/thread.jspa?threadID=2157090&tstart=180

  • Can I uninstall iOS 8 and then reinstall it?

    Can I uninstall iOS 8 and then reinstall it?

    Hello pritammmul,
    If you follow the steps in the article below, it will erase all the contents and then install the latest version of iOS on your iPhone.
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/ht1414
    Regards,
    -Norm G. 

  • How can i uninstall Windows 7 and remove the partition?

    how can i uninstall Windows 7 and remove the partition?  white unibody late 2009.  i cannot seem to find bootcamp either :/

    Open the Boot Camp Assistant in the /Applications/Utilities/ folder and use it to restore the drive to a single partition setup. If it's not there, use Pacifist to extract it from your install DVD and run the combo updater for your OS version.
    (79308)

  • How can i sync my iphone and ipad to a new computer

    how can i sync my iphone and ipad to a new computer

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • How can I retrieve my contacts and pictures after installing iOS6 on my iphone?

    How can I retrieve my contacts and pictures after installing iOS6 on my iphone? Don't call me stupid! I was relying on iCloud to have backed all this up, but turns out it didn't work. Can anyone help me get my photos back - they were of my baby daughter. Also, I've lost all my contacts. Please help.

    Unfortunately no. The only way the phone backs up is if you make it back up. You either connect to iTunes and backup and sync, or you set it up for a wifi sync to iCloud. But you have to setup iCloud to start with. You have learned a hard lesson on how to make sure you import pictures on a regular basis like you would the digital camera. When things happen to the phone, this is the media that is lost the most (pictures in camera roll). After taking a number of pictures, and especially ones you consider important, you should connect the phone to the computer and import them, so there is a backup copy on the computer.
    Contacts are saved in the backup as well, however they are really designed to be synced to a supported application on the computer, or backed up to iCloud or other cloud service. And, the only way to go back in time on the phone is to restore from a backup, but you also have to remember, you would lose everything on the phone that you had done since that backup, so it is a double edged sword.

  • Can not update error 1602 and can not restore error 1604 what is the solution

    Have a IPod touch 4, can't update (error 1602) and can't restore (error 1604) any solution?

    try this support article.

  • HT1338 Hi everybody..i have an enigmatic problem since i bought MacBook Air..i can't watch youtube videos and i did install the latest adobe flash player BUT when i start to install it the system keeps asking me to enter a password ? which password i need

    Hi everybody..i have an enigmatic problem since i bought MacBook Air..i can't watch youtube videos and i did install the latest adobe flash player BUT when i start to install it the system keeps asking me to enter a password ? which password i need ??????

    Your admin account password.

Maybe you are looking for

  • Connecting HP LaserJet P1102w printer to wireless network

    I have been trying to connect my HP LaserJet P1102w printer to my wireless network for a couple days now. I put the disk in and follow the instructions. When I get to the part about plugging in the USB to the desktop computer and turning on the print

  • Problem when installing oracle 10g on RHEL-4

    greetings, i have been trying to install oracle 10g on my linux machine for the past 10 days, everytimje i do all the steps and change the kernel parameters but when i start the runinstaller file. i get the folloeing error. I don't know what this err

  • Itunes will not open since update

    Hi all have just updated itunes for windows and now it will not open "this application has failed to start because MSVCR80.dll was not found .........." ERROR 7 (windows error 126) tried reinstalling several times but no different

  • I can't import P2 footage

    I have an old project that needs some changes. The footage I need to add was never imported the first time around. When I go to the log and transfer window, I can't add the P2 folder for this project, or any project for that matter. I'm using FCP 6.0

  • PDK for EP 7.0

    Hi all, We installed EP 7.0 successfully. But we couldn't find the PDK for EP 7.0 anywhere. The links which were mentioned in other threads are not working. I couldn't find any info regarding PDK download. Any inputs on the path to download PDK for E