Quicktime cant export or share!

My Quicktime can't export or share files!
The Export seems to work fine but crashes in the end, the exported file crashes every software (Quicktime, iMovie, Mail etc.)
The same problem when exporting in iMovie!
The same file converts just fine on my girlfriends mac.
What can I do?
(I run the latest system and Quicktime pro version on an iMac G5...)
Thanks in advance!
//Mikael

Yes the files opens and plays perfectly in Quicktime.
I have had this problem for a while, the file i tryed now has format and codek:
Motion JPEG OpenDML, Unsigned Integer (Whatever that means)
Todays files are from a Cannon camera but I have had similar problems in other files i.e. original iMovie files...
Previous attempts to fix this problem has been:
- Reinstalling Quicktime.
- Creating a new user on this mac.
- Reinstalling the system (keeping my user info)
None of these helped.
The error message I get includes this text "KERNINVALIDADDRESS (0x0001) at 0xc0000000 quicktime"
Greatful for any advise!
With regards
Mikael
Sweden

Similar Messages

Cant export in quicktime pro get buffer overrun detected

cant export in quicktime pro progeam shuts down and a microsoft visual c++ runtime libary buffer overrun detected error pops up what is the fix for this??

I do not know if this helps as my problem was specifically with picture viewer but I also was unable to run the quicktime updater. I removed quick time via the windows add/remove in control panel as I had done before. But this time I did a search for all quick time files and found over 50 files (I have 4 partitions and they were hiding in one of them). So I deleted them, did a defrag (using diskeeper 10) then downloaded the latest version of quick time. Now it works perfectly.

Cant export using quicktime in mp4

hi,
i tried to export using "share" using quicktime to get an mp4 file , then the process start, and within a couple of seconds its just stop ! and the temporary file disapear. I tried to change some setting to see if it change something but no. it work sometime wth other project. i also tried to duplicate the project but no luck, i even redo the project, no luck, i tried to delete prefs, no luck, finally i tried to export without using quicktime just "export movie..." and then it work ! but i got an mov file
anyone have a clue please ?
thanx
J

i found in an other thread that it was the "hard" filter that was causing that bug, so i remove the filters and tried again et voilà !
so it was the filters, now everything works fine
J

HT4714 i cant export my video to any of the destinations on my list.. it keeps saying QuickTime Error -50 what do i do cuz if i cant use it i want my money back

i cant export my video into anything i keep getting a QuickTime Error -50

Unfortunately, these boards have too many similar complaints.
There are variety of things that seem to cause these exporting failures. Most seem to relate to corrupted clips. Here's a list of fixes that have worked to solve some of the reported problems.
First it's worthwhile to trash preferences; use this app.
Turn off Background Rendering.
From within FCP, delete project render files and event render files. Select a short section and export without rendering. If it works, export the full project. If it doesn't work…
Create a new project. Copy the old project and paste into the new project. Export a short test and if it exports. export the full project. If that doesn't work…
Create a new user account.
Good luck.
Russ

I cant export my photos from my mac to my ipad , bluetooth wont se

i cant export my photos from my mac - osx - 10.6.8 to my ipad air , bluetooth wont recognise it

That's because Bluetooth is not supported out of the box for the transfer of photos to the iPad from your Mac. There are third party apps that let you transfer over WiFi or Bluetooth. I use this one. There are others in the App Store that you can check out.
Wireless Transfer App - Share, sync & backup photos, pictures ...
You can also sync photos from the Mac to the iPad using iTunes.
iTunes: Syncing photos - Support - Apple

Loss of Export and Share with 7.1.3

On a G4 PowerBook FW800, I've updated to QuickTime 7.1.3.
The Export and Share items are now gone. This is QuickTime Pro and that is still rewcognized under Registration.
Any similiar experiences? Any solutions other than trying to downgrade?

My guess would be that a firewall or some other privacy filter or possibly antivirus or antispyware utility is blocking the ability of QuickTime Player to connect to Apple's server. Many such utilities and filters will erroneously consider an upgrade to an application as a new installation and so have to be reset to allow the connection again, so you may need to go into the settings of any such firewall/filter/utility and reallow QuickTime Player's connections.
Hope this helps.

Imovie shuts down when I click to Export Movie, share or finish project.

Imovie shuts down when I click to Export Movie, share or finish project.
I have upgraded RAM Memory cards from 4 to 8 GB and cleaned away the soft wear and files I do not need.
The movie is in HD and about 25 min long.
The "Problem Info" says:
Process:         iMovie [1190]
Path:            /Applications/iMovie.app/Contents/MacOS/iMovie
Identifier:      com.apple.iMovieApp
Version:         9.0.2 (1099)
Build Info:      iMovieApp-10990000~3
Code Type:       X86 (Native)
Parent Process: launchd [102]
What is there to do?
/Nicco

Hello there, averypamby.
The following Knowledge Base article offers up some great information in regards to sharing/exporting your video in Motion:
Motion 5: Export a QuickTime movie
http://support.apple.com/kb/PH16623
Export your project as a movie file
Choose Share > Export Movie (or press Command-E).
Choose an export format from the Export pop-up menu.
This menu provides a list of codecs.
Choose an option from the “Open with” pop-up menu:
Do Nothing: The movie is not opened after the export is completed.
Open with QuickTime Player: The movie is opened in QuickTime Player.
Open with Compressor: The movie is opened in Compressor (if installed on your system).
Choose an option from the Include pop-up menu: Video and Audio, or Video Only.
If you’ve set In and Out points in the Timeline, use the Duration pop-up menu to choose whether to export the sequence or the portion between the In and Out points.
To specify additional Motion-specific options, click Render.
For more information about options available in the Render pane, see Render settings.
To see details about the file to be output, click Summary.
Click Next.
Enter a name and choose a location for the exported file, then click Save.
Motion renders and saves your movie.
Important:    The Export Movie command does not use background rendering, so you must wait until rendering is finished before you can continue to work in Motion.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

FCP quicktime conversion export problem

issue exporting still image instead of video
FCP quicktime conversion export problem
within the last 2 weeks i have exported from FCP studio 7.0.3 as quicktime conversion, the settings are:
export as QuickTime Conversion:
> Options> quality> set to Best>
Standard Video Compression Settings
Compression Type: H.264
Motion:
Frame Rate: Current fps
Key Frames: Every 24 frames
check Frame Reordering
Compressor:
Quality: Best
Encodeing: Best (Multi-pass)
Data Rate:
Automatic
Filter… none
Size>
Dimensions:
NTSC 720x486 16:9
>ok
Sound: (don't change anything)
Format: Integer (Little Endian)
Sample rate: 48.000kHz
Sample size: 16-bit
Channels: (L R)
>Export
the results i get a odd. - the video exports fine, except for the beginning titles, instead a still frame image from somewhere else in the video occupies that intro, until the first transition- in this case- dip to white, then the rest of the video is fine. the portion of the beginning that does not show are composed of: livetype text credits in V2 - in which i have done a manual opacity fade up and down - so the livetype text fades in, over matte color solid in V1. in the exported video -i do not see any of this, all i see is a seemingly random still from somewhere else in the video. i can however hear the audio as it is supposed be.
cant figure out why this is happening. anybody know?
i think the livetype files are 1920 x 1080.
my FCP sequence is 720 p
this has only recently started happening and doesn't seem to be consistent.
im wondering if it has to do with the live type files, or the white solid?…
or the conversion settings above?

Alistair
Earlybird is exporting H264 ... the Key Frames setting is determining the GOP length. This value should really be determined based on the complexity of the video, to my understanding, the actual frame rate has no bearing on it. If you have very complex fast moving content then a low Key Frame rate is advisable to ensure good image quality (although it will adversely affect the filesize) whereas if you have slow moving or static content (like an interview subject) then a higher Key Frame rate will still produce a good image but at a smaler filesize. The default of 24 should be pretty much fine as a catchall starting point.
Earlybird
Corrupted render files (and render references) can be a pain because FCP will use those files and references in place of the original media when building the export. And so it should as it does't want to waste time re-rendering sections that are apparently already rendered. Unfortuantely, as noted, if the render file has gone bad and/or starts referencing the wrong media then you'll get these wierd flashes of completely unexpeced and unwanted footage showing up where it shouldn't be. When you trash those files then QT / FCP will just go back and re-reference the original media ... so it's usually a worthwhile step to take just in case thats the problem. The worse case scenario is that it only that doesn't work and you spend some time unecessarily re-rendering.
As to why these files go bad? That I don't know. Why do Preferences get corrupted? That I don't know either but it definitely happens :-(
Cheers
Andy

Export gives "Unable to create" error,Can't EXPORT or SHARE modified images

I am running iPhoto 8.1.2 and I cannot export or share any images I modify.
Upon editing images (cropping or enhancing color profile), I am unable to drag and drop images to my desktop (gives a "∅" symbol) which I used to do all the time. I cannot export them - iPhoto gives an error: "Unable to create" filename error...
If I look at the "Show file" and verify the contents of the folder, none of the images I have modified appear there. If I look at "Show original file" all the original files are there but do not have my edits/cropping, etc. Where are my modified images going and how can I get to them? iPhoto seems like it is getting Alzheimer's or something...
I have tried closing and re-opened iPhoto and all the images thumbnails appear to be ok with my updated crops/enhancements. Double-clicking and opening them opens files with the correct edit/enhancements. Everything seems ok until I try to export or share any of the modified photos.
I tried rebuilding iPhoto and selecting the first 4 options but after the rebuild the problem still persists...
None of the files that I cropped/enhanced appear in the "Modified" folder for that date. There are some files there, but they appear to be files that I deleted!
So, where are my cropped/enhanced photos going??? iPhoto shows them ok in the Events, etc. but they are not in the "Modified" folder and I cannot export, drag/drop, email or share them...
This has been happening to me for awhile now and it is very frustrating. iPhoto is ok so long as I don't do any cropping or enhancing. If I do that, then it gets all screwed up...
I know that I can use something like "iPhoto Library Manager" to rebuild stuff but I don't want to lose any of my data. I have done extensive work with faces, places, attributes, names, etc...
I JUST WANT iPHOTO TO WORK LIKE IT IS SUPPOSED TO AND LIKE IT USED TO!
Thanks,
Steve

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair Library permissions.
If the permissions have been mucked up somehow, it's likely that your edits have not been saved.
If the fails:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

How to correctly export and share an ADF project?

We are having some trouble with our SVN, so for the moment I am trying to share an ADF application I started developing with another developer by making a zip file of the entire application directory. We are both using JDeveloper 11.1.1.6.
My colleague extracts the zip file and opens the application jws file, but JDeveloper on his machine does not seem to be recognizing that it is an ADF application. Many of the ADF libraries are missing in the project classpath, and the design editor does not open JSF files correctly, and shows lots of errors.
Why might this be happening? What is the correct way to export and share an ADF application workspace?

First thng to try is to rename the system11.1.1.x.x.x.x folder and start jdev again. Jdev will recreate the folder, but any bad configuration inside the folder are gone and this might help to get it running again. However, all customization done in jdev are gone. It's like jdev is freshly installed.
If you try this and get the question if you like to migrate from an older version answer 'no' as you might get the error back this way.
Timo

I can't export or share my project.

Okay, I am a beginner and trying my best. But right now my best is definately not good enough.
I am using the 30-day trial of Final Cut Pro X with the latest updates. It's only limitation is the 30-day trial so I should be able to export and share my project.
After I mark the project and then click on the share-symbol->export I get the following message: "This item cannot be shared while it is still referencing media on the camera." I have also tried file->share but that menu is in gray and I can't click the options. If I click on any of the clips in the events window I can export them but that's not what I want to do.
I can't remove the trial and download it again since I can only download it once.
I suspect it might have something to do with my organizing the clips and the original files. My originals are in a folder on the desktop and that is the location I import media from into Final Cut's events.
If you have any ideas, please help me out.
Sincerely,
Edith

Thanks for your fast reply!
I had the copy to event function checked on. The folder is a regular folder that I created on my desktop. I have put other folders inside that folder, one of which is called "FILM" and contains 10 camera archive folders that the camera (Sony NEX-5N) created for me. That is how the footage was automatically uploaded onto my MacBook Pro. Each of the camera archive folders contains multiple clips.

Using Quicktime's "Export for Web" feature in iWeb?

Greetings,
Does anyone know if this is possible within iWeb, that is, to use movies created using Quicktime's "Export to Web" feature, which really seems to deliver superior movie quality?
Much appreciated,
DaveB

Thanks, good stuff, though I'm still having a small problem with this. I'm getting a gray line around the top and left of my movie and the right side of the player is getting cut off. When I try to make the width larger, it just moves the gray line further to the left.
Any ideas?
http://www.brianderr.com/brianderr/copythis3.html
*This is the script that I added to the html snippet in iWeb.* I changed the height to 505px because it was cutting off the bottom of the player at 496.
<iframe src="http://idisk.me.com/brianderr/Public/KANYE%20PT%201/kanye1.html"
style="width:720px; height:505px";
scrolling="no">
</iframe>
*This is the script from my read me file that I kept:*
<?xml version="1.0" encoding="utf-8" ?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html>
<head>
<title>QuickTime Pro - Export for Web - KANYE PT 1</title>
<script src="http://www.apple.com/library/quicktime/scripts/ac_quicktime.js" language="JavaScript" type="text/javascript"></script>
<script src="http://www.apple.com/library/quicktime/scripts/qtp_library.js" language="JavaScript" type="text/javascript"></script>
<link href="http://www.apple.com/library/quicktime/stylesheets/qtp_library.css" rel="StyleSheet" type="text/css" />
</head>
<body><script type="text/javascript">
</script>
<noscript></body>
</html>

Cant Export movies in 1280 x 720 only in 960 x 540

before when i try to export videos i cant export in 1280 x 720 anymore only in 960 x 540 or below
why did it change from 1280 x 720 to 960 x 540?
anyone know please help me out
thanks =)

Romeromckay wrote:
.. the video i shot is in 1280 x 720
.. and my questions were:
• how did you import, Full or Large?
• did you optimize the clips..?
or, let's try the other way round:
• in your Project, ctrl-click a clip
• choose 'Reveal in Finder'
• Apple-i that file..
• what resolution do you read under 'additional info'?

I cant export my photo's ,why ?

i was Re-install my laptop ,and i'll install Lightroom 5,3 . but after i edited a pic from my disc , i cant Export them . what happend ?
it's happend after i re-install my laptop and never happend before
maybe you Gentleman have a Result for this promblem
THANKS BEST REGARD IVAN

Since you didn't state your operating system, you should go to your favorite search engine and find instructions on how to change permissions. Follow those instructions.

QuickTime not playing QuickTime when exported?

Hi,
I just exported a movie for iPhone from QuickTime using Export for web. I get a question mark.
I'm using QuickTime Pro Version 7.6.2 (518) and OS X 10.5.7
I also get the question mark when publishing movies with iWeb so I'm assuming it's the same problem.
What can I do to fix this and ensure that others can see these movies?
thanks,
Dave

sure thing. I've posted these galleries in 2 places and neither are working for me:
http://gallery.me.com/timaging#100060
http://web.me.com/timaging/DaveLisaPix/CapeCod2009.html
second one doesn't work in Firefox at all, so I'm just considering the first link for now. Scroll down and you will see a few movies in there.
Dave

Quicktime cant export or share!

Similar Messages

Maybe you are looking for