Quicktime cant read files and displays Alert

OSX 10.3.9
quicktime 7.0.4
I cant figure this out. I have a quicktime file that runs fine on two other OSX systems (powerbook G4 and dual G5) but when I file transfer the same quicktime video via CD and via file transfer - I get an Alert that says:
"QuickTime cannot open the file: "filename blurred.mpg"
it is not a file that QuickTime understands (-2048).
Any clue why this happens?
cheers,
Noah

And I just moved the exact file that encountered the quicktime error and moved it to another machine and it played just fine there.
what on earth could be wrong with my powerbook that is resulting in a quicktime alert.
cheers

Similar Messages

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt ‏2 KB
read_array.vi ‏21 KB

The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

I need to read data from a text file and display it in a datagrid.how can this be done..please help

hey ppl
i have a datagrid in my form.i need to read input(fields..sort of a database) from a text file and display its contents in the datagrid.
how can this be done.. and also after every few seconds reading event should be re executed.. and that the contents of the datagrid will keep changing as per the changes in the file...
please help as this is urgent and important.. if possible please provide me with an example code as i am completely new to flex...
thanks.....

It's not possible to read from a file without using classes from the core API*. You'll have to get clarification from your instructor as to which classes are and are not allowed.
[http://java.sun.com/docs/books/tutorial/essential/io/]
*Unless you write a bunch of JNI code to replicate what the java.io classes are doing.

// Code Help need .. in Reading CSV file and display the Output.

Hi All,
I am a new Bee in code and started learning code, I have stared with Console application and need your advice and suggestion.
I want to write a code which read the input from the CSV file and display the output in console application combination of first name and lastname append with the name of the collage in village
The example of CSV file is
Firstname,LastName
Happy,Coding
Learn,C#
I want to display the output as
HappyCodingXYZCollage
LearnC#XYXCollage
The below is the code I have tried so far.
// .Reading a CSV
var reader = new StreamReader(File.OpenRead(@"D:\Users\RajaVill\Desktop\C#\input.csv"));
List<string> listA = new List<string>();
while (!reader.EndOfStream)
var line = reader.ReadLine();
string[] values = line.Split(',');
listA.Add(values[0]);
listA.Add(values[1]);
listA.Add(values[2]);
// listB.Add(values[1]);
foreach (string str in listA)
//StreamWriter writer = new StreamWriter(File.OpenWrite(@"D:\\suman.txt"));
Console.WriteLine("the value is {0}", str);
Console.ReadLine();
Kindly advice and let me know, How to read the column header of the CSV file. so I can apply my logic the display combination of firstname,lastname and name of the collage
Best Regards,
Raja Village Sync
Beginer Coder

Very simple example:
var column1 = new List<string>();
var column2 = new List<string>();
using (var rd = new StreamReader("filename.csv"))
while (!rd.EndOfStream)
var splits = rd.ReadLine().Split(';');
column1.Add(splits[0]);
column2.Add(splits[1]);
// print column1
Console.WriteLine("Column 1:");
foreach (var element in column1)
Console.WriteLine(element);
// print column2
Console.WriteLine("Column 2:");
foreach (var element in column2)
Console.WriteLine(element);
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

Reading from a text file and displaying the contents with in a frame

Hi All,
I am trying to read some data from a text file and display it on a AWT Frame. The contents of the text file are as follows:
pcode1,pname1,price1,sname1,
pcode2,pname2,price2,sname1,
I am writing a method to read the contents from a text file and store them into a string by using FileInputStream and InputStreamReader.
Now I am dividing the string(which has the contents of the text file) into tokens using the StringTokenizer class. The method is as show below
void ReadTextFile()
                    FileInputStream fis=new FileInputStream(new File("nieman.txt"));
                     InputStreamReader isr=new InputStreamReader(fis);
                     char[] buf=new char[1024];
                     isr.read(buf,0,1024);
                     fstr=new String(buf);
                     String Tokenizer st=new StringTokenizer(fstr,",");
                     while(st.hasMoreTokens())
                                      pcode1=st.nextToken();
                           pname1=st.nextToken();
          price1=st.nextToken();
                          sname1=st.nextToken();
     } //close of while loop
                } //close of methodHere goes my problem: I am unable to display the values of pcode1,pname1,price1,sname1 when I am trying to access them from outside the ReadTextFile method as they are storing "null" values . I want to create a persistent string variable so that I can access the contents of the string variable from anywhere with in the java file. Please provide your comments for this problem as early as possible.
Thanks in advance.

If pcode1,pname1,price1,sname1 are global variables, which I assume they are, then simply put the word static in front of them. That way, any class in your file can access those values by simply using this notation:
MyClassName.pcode1;
MyClassName.pname1;
MyClassName.price1;
MyClassName.sname1

Can a servlet read a jsp file and display its contents?

Hi,
I would like to know if Servlets can read a Jsp file and display its contents.. Right now for our website, I am using a html file to be displayed after a successful post operation through the Servlets...
-Thanks!

I posted this in another thread.
Here's some code that reads using a URL. This doesn't work with JSPs as the server executes JSP when it connects but it's useful for other file types. Note that the filename is a URI</h1>This is <code>show.jsp</code></h1>
<hr>
<%! String file = null; %>
<%! java.io.InputStream is = null; %>
<%
file = request.getParameterValues("filename")[0];
try {
is = (new java.net.URL(file)).openStream();
} catch (java.io.IOException ioe) { out.write(file + " not found!<br>"); }
java.io.BufferedReader in = new java.io.BufferedReader(new java.io.InputStreamReader(is));
String line = "";
%>
<pre>
<%
while((line = in.readLine()) != null) {
%>
<%=line%>
<%
%>
</pre>

Reading a unicode file and displaying it on jsp !!!!!

I've one file that consists of unicode character. I've to read it and display it on the jsp page. I'm able to display it other contents but for unicode i'm unable to display it properly. Could anyone help me how to achieve this problem.....
in advance thanks a lot...............

Read this.

Help! Read raw Image data from a file and display on the JPanel or JFrame.

PLEASE HELP, I want to Read Binary(Raw Image)data (16 bit integer) from a file and display on the JPanel or JFrame.

Hey,
I need to do the same thing. Did you find a way to do that?
Could you sent me the code?
It's urgent, please.
My e-mail is [email protected]

Code to read xml file and display that data using sax parser

Hai
My problem I have to read a xml file and display the contents of the file on console using sax parser.

here you go

Hi i am new to labview. i want to extract data from a text file and display it on the front panel. how do i proceed??

Hi i am new to labview
I want to extract data from a text file and display it on the front panel.
How do i proceed??
I have attached a file for your brief idea...
Attachments:
extract.jpg ‏3797 KB

RoopeshV wrote:
Hi,
The below code shows how to read from txt file and display in the perticular fields.
Why have you used waveform?
Regards,
Roopesh
There are so many things wrong with this VI, I'm not even sure where to start.
Hard-coding paths that point to your user folder on the block diagram. What if somebody else tries to run it? They'll get an error. What if somebody tries to run this on Windows 7? They'll get an error. What if somebody tries to run this on a Mac or Linux? They'll get an error.
Not using Read From Spreadsheet File.
Use of local variables to populate an array.
Cannot insert values into an empty array.
What if there's a line missing from the text file? Now your data will not line up. Your case structure does handle this.
Also, how does this answer the poster's question?

Include text file and display from text file

Ok. I'm found the site with the monkey on the the flash thing and all it shows is a name, email and something else and I used it and it works by including a txt file and displaying text from that file as putting down this information
name.text = this.name;
and I can't find the site anymore to get help.
I want to know how to include a PHP script that shows this information like this
text=something I need&username=My Name&email=[email protected]
I want to show this stuff on the flash but every time I execute by using it as localhost/test.php, it will show a sentax error.
This is really stressing me out and I need a lot of help on this stuff.
Can someone help me?

ok. let me describe something else.
there's 3 text boxes that is dynamic text.
one of them is called name
the other one is called email
and last one is called location
in the text file, it shows this for importing to the flash file
name=My Name&email=EMAIL&location=My Location
When viewing the flash file that you created, it shows the name, it shows the email, and it shows location.
When I do it on my own even with a text file, it keeps on saying that there is an error on line 1.
I found a site that shows how to do it and it shows what to put in a text file, and it shows the action script. On the FLA file that he shows me has a monkey on the flash file and it has 3 text boxes that I described above. As well as the text file, it is the same. I used the example and it worked but I can't find the example again. I don't know what happened to the website and I don't know what happened to the download I had but it is not downloaded any more. I have adanced systemcare pro so it clears out my recent web searches and my recent downloads so I can't find it. I did a google search on anything about action scripts. I even did a monkey action script search and I couldn't find it.
It's making me mad and I don't know what to do. This is stressing me out way more than you think.
UPDATE:
I did a google search on a file I found in my www folder and I found it. finally.
Here's the site.
http://www.kirupa.com/developer/mx/externaldata.htm
now, I need to figure out how to load it from a PHP file.

How to upload the tif file and Display into Iframe

Hi all,
   My requirement is to upload 'n' number of tif files and display the file name in dropdown.
   If i select the file name, it should display the file in Iframe.
My problem is i am not able to upload the tif file.
try{
      byte []by=new byte[wdContext.currentContextElement().getPhotoResource().read(true).available()];
      wdContext.currentContextElement().getPhotoResource().read(true).read(by);
      String ext=wdContext.currentContextElement().getPhotoResource().getResourceType().getFileExtension();
      WDWebResourceType res=wdContext.currentContextElement().getPhotoResource().getResourceType();
      IWDResource resource=null;
      resource=WDResourceFactory.createResource(by,"sample",WDWebResourceType.getWebResourceTypeForFileExtension(ext));
       wdContext.currentContextElement().setPhoto(resource.toString());
          catch(Exception e){
In the above code Photo is Iframe Context variable.
If i upload tif file means it directly giving Save and Open options is giving.
Please how to slove this probelm...........................
Thanks,
Suni

Hi Satya,
In HTML a TIF file can be displayed as"
<html>
<body>
<object height="100%" width="100%"
type="image/tiff" data="PO.tif">
</object>
</body>
</html>
Hope it helps.
Regards,
Alka

Upload excel file and display content in sapui5 table

hi:all
how to upload excel files and display its contents in the view of sapui5 table ,then 'create ' these data into the abap database using odataservice.
Do you have any solutions ? I appreciate for your help.

Two possible way come to mind.
1. ADF DI (desktop integration): sorry, don't know enough about it to give a how to :-(
2. POI (http://poi.apache.org/) : open source project to read and write excel file with java. Using POI you can open the .xsl file, read it's contents and display it as af:table. For this you need to read the xsl into a data structure (this can be a temporary db table or a list of POJOs) and build a data control out of it. This you can drop on a page as table.
Timo
Edited by: Timo Hahn on 15.02.2010 13:59

Parsing large xml file and display using swing

Hi all,
I want to read a large xml file and display graphically in swing as a tree structure.
I implemented it and works fine for files of 5MB size after increasing the jvm heap size (-Xmx). If the file size is larger than 5MB it throws out of memory error. I'm creating a custom datastructure from the xml and I'm using sax parsing.
After displaying the datastructure, the user could do some operation on this, like search etc.
Can any of you suggest a method, to support larger files ? What I'm looking for is create the datastructure in file system, rather than in memory.
Any other tips for memory management would be greatly appreciated
Thanks in Advance.
Nisha

Use a memory-mapped file?
http://javaalmanac.com/egs/java.nio/CreateMemMap.html

Reading files and converting into xml structure

Hi,
In my application a client requests for the folder structure information to a server through RMI. The server needs to read files and folders on local machine and convert it into some structure (I am thinking of using xml) and send it back. For eg: I am planning to have Server send back something like:
<directory name = "parentdirectory">
<file name = "abc.jpg"/>
<file name = "def.bmp"/>
<directory" name = "subdirectory">
<file name = "hij.jpg"/>
<file name = "klm.bmp"/>
</directory>
</directory>
It is just the names of the files I am interested in and not the contents. Is this a good approach of sending back the data as a string containg xml definition. Is there any better appproach in terms of performance, memory etc? I am currently planning on using DOM for construction of this structure. Is there a source code for reading and converting the folder structure into xml. Just for your information, the clients gets this information and shows it as a tree structure on the GUI.
Thanks!!!!

Is this a good approach of sending back the data as a string containg xml definition. It'll work.
An alternative, more direct approach is to build a memory representation and send this as argument/return value of an RMI call. You'd need to write classes MyDirectory and MyFile; MyFile has just a name; MyDirectory has a name and a collection of MyDirectory and one of MyFile. Make these classes implement Serializable and you can send them over RMI.
The effort to write those trivial classes would be less than to implement XML encoding/decoding, and also in terms of runtime performance and memory it will be hard to beat Java's serialization with anything XML-based. In this case I doubt performance/memory are relevant considerations though.
If for some reason I'd go for sending XML Strings anyway, I wouldn't do the encoding/decoding myself; I'd use XStream to convert Java classes to/from XML and still end up writing the above two classes and be done.
Sorry if you wanted a simple yes or no :-)

Quicktime cant read files and displays Alert

Similar Messages

Maybe you are looking for