QuickTime Conversion Exporting HDV

Hi,
The camera I used was a Sony HDV 1080i60 and my movie is about 10 minutes in length. Just a simple video with fade in and fade outs with audio.
It seems that when I convert by exporting to QuickTime Movie, there is no issue. However, when exported through certain settings under QuickTime Conversion, the 'cross dissolve' effect does not seem to appear properly.
Can anybody suggest a standard setting for this?
Thank you.

Hi Muglho,
You should really use QT movie, same settings self-contained and not QT conversion as the latter causes further coompression to your video and possible loss of quality (HDV is an heavely compressed format).
gogi

Similar Messages

FCP quicktime conversion export problem

issue exporting still image instead of video
FCP quicktime conversion export problem
within the last 2 weeks i have exported from FCP studio 7.0.3 as quicktime conversion, the settings are:
export as QuickTime Conversion:
> Options> quality> set to Best>
Standard Video Compression Settings
Compression Type: H.264
Motion:
Frame Rate: Current fps
Key Frames: Every 24 frames
check Frame Reordering
Compressor:
Quality: Best
Encodeing: Best (Multi-pass)
Data Rate:
Automatic
Filter… none
Size>
Dimensions:
NTSC 720x486 16:9
>ok
Sound: (don't change anything)
Format: Integer (Little Endian)
Sample rate: 48.000kHz
Sample size: 16-bit
Channels: (L R)
>Export
the results i get a odd. - the video exports fine, except for the beginning titles, instead a still frame image from somewhere else in the video occupies that intro, until the first transition- in this case- dip to white, then the rest of the video is fine. the portion of the beginning that does not show are composed of: livetype text credits in V2 - in which i have done a manual opacity fade up and down - so the livetype text fades in, over matte color solid in V1. in the exported video -i do not see any of this, all i see is a seemingly random still from somewhere else in the video. i can however hear the audio as it is supposed be.
cant figure out why this is happening. anybody know?
i think the livetype files are 1920 x 1080.
my FCP sequence is 720 p
this has only recently started happening and doesn't seem to be consistent.
im wondering if it has to do with the live type files, or the white solid?…
or the conversion settings above?

Alistair
Earlybird is exporting H264 ... the Key Frames setting is determining the GOP length. This value should really be determined based on the complexity of the video, to my understanding, the actual frame rate has no bearing on it. If you have very complex fast moving content then a low Key Frame rate is advisable to ensure good image quality (although it will adversely affect the filesize) whereas if you have slow moving or static content (like an interview subject) then a higher Key Frame rate will still produce a good image but at a smaler filesize. The default of 24 should be pretty much fine as a catchall starting point.
Earlybird
Corrupted render files (and render references) can be a pain because FCP will use those files and references in place of the original media when building the export. And so it should as it does't want to waste time re-rendering sections that are apparently already rendered. Unfortuantely, as noted, if the render file has gone bad and/or starts referencing the wrong media then you'll get these wierd flashes of completely unexpeced and unwanted footage showing up where it shouldn't be. When you trash those files then QT / FCP will just go back and re-reference the original media ... so it's usually a worthwhile step to take just in case thats the problem. The worse case scenario is that it only that doesn't work and you spend some time unecessarily re-rendering.
As to why these files go bad? That I don't know. Why do Preferences get corrupted? That I don't know either but it definitely happens :-(
Cheers
Andy

FCP7 Quicktime Conversion Export Resetting

Hi,
I'm trying to export a 46 minute HD project from FCP 7, which is due to TX on national TV in 4 days time.
I'm trying to export as the following:
Pro res 422
Quicktime Conversion
1920x1080
6 channels of audio
25p
49Khv 16bit Linear PCM
However, the Quicktime conversion export keeps reaching 100%, and then resets straight back to either 0 or a different random percentage. Why is this? It's been going for 5/6 hours...

This is FCPX forum. Try FCP Studio

Can you make a custom quicktime conversion export be your default?

When I go to export a quicktime conversion, I change the perameters to a custom setting for my need. Next time I go back into quicktime conversion, it goes back to the FCP defaults and I have to set my custom settings all over again.
Is there a way to create a custom export in quicktime conversion AND MAKE THAT the new default for quicktime conversion?
Alternatively, is there a quicker way to always get to my preferred export settings?
Thanks.

Why not just construct your favourite QT EXPORT setting in Compressor and then drag that setting into the box every time you want that type of movie?
K.

Final Cut Pro 5.1.4 crashes when using QuickTime conversion export

Our copy of Final Cut Pro 5.1.4 has started to crash when exporting using QuickTime Conversion. It gets about 66% complete, then dumps out. I have updated FCP using Software Update and QT to the latest version. Any ideas why this happening? Pro Kit 4.5 installed. QuickTime Pro 7.4.5
My previous post had the wrong version of FCP. Dyslexia sets in.

Erik:
quite often during render I get the error messages "The specific file is in use by another application"
Check this Apple doc:
http://docs.info.apple.com/article.html?artnum=302790
I think that was solved with 10.4.10.
About the crash problem, you would post the system configuration of that computer.
Hope that helps !
Alberto

KNOWN PROBLEM BUT NO SOLVING: FCE CRASHES ON QUICKTIME CONVERSION EXPORT

Hi to all,
i'm an italian new user. I already use FCP on my Mac Pro 2007,and i purchased FCE for my new MacBook 2008 3GB Ram.
I use Snow Leopard for both machines. FCE is installed only on MacBook. The issue is:
When i put ANYTHING on timeline (effect,clips of ALL formatsetc) indipendently from Sequence presets,FINALCUT EXPRESS CRASHES IMMEDIATLY WHEN I TRY TO EXPORT TO "QUICKTIME CONVERSION". No messages,no report,nothing.
I searched and read many pages of this forum,i found a similar thread where the suggestions were the erase of preferences in Libray and reinstalling. I DID THAT but FCE crashes again.
I'd like to resolve the problem on this machine,because i will use FCE on this computer.
Follow, there is a sample video of my problem,i captured it for this thread. I hope will help you to understand exactly i want to repair:
http://www.zshare.net/video/658799979072b569/
FCE CRASH.mov - 34.38MB
Thanks in advance
Lamberto from Italy
Message was edited by: LamProds,Inc
Message was edited by: LamProds,Inc
Message was edited by: LamProds,Inc
Message was edited by: LamProds,Inc

Tom,
This is an excellent tip. I really learnt something I wasn't aware of. FCE always seemed to render anyway but it takes longer if you did not render first. But you are right. The manual mentions it as well.
Anyway, it does not explain really why, with Quicktime X installed, I and others experience FCE crashes. Before with Leopard , FCE really never crashed.
Contrary to what I mentioned, I still experience crashes, also after full rendering. Strangely enough, it does not happen all the time. It seems difficult to reproduce the circumstances when FCE crashes on export. Any suggestions?
Jan

QUICKIE - default settings for quicktime conversion export

Hi All...
Is it possible to set the default settings to still image when choosing export via quicktime conversion?
I do a lot of frame grabs and at present whenever i do an export via QT Conversion i have to change the default from movie to still image...can still image be set to the default and therefore be selected when QT Conversion is selected from export options?
I think that is comprehensive enough a question!
Thanks for any help or guidance..it will save a lot of mouse clicking if it is possible.
ta...Mike

Michael Grenadier wrote:
Here's what I do. Park on the frame I want to export. Mark In AND out, Make subclip...
Wow! I sometimes need to do a few frame grabs, and this is a great way to do it.
Good thinking.
there are a few other editors and often it is difficult to persuade them out of their comfort zones.
Gee and they still get work?
If I didn't get out of my "comfort zone" my style wouldn't change, I wouldn't be able to handle OS and suite updates, let alone move away from linear suites.
I understand that some people might want a quick and easy solution, a single button press, but this solution sounds like it isn't so hard to make editors run and hide.
If they do baulk and cry, I would suggest you find some new editors; cause they are never going to adapt and give your clients top quality stylish work.

Fcp quicktime conversion export colour problem

Since upgrading to Snow Leopard, i have noticed that whenever i want to export a file using Quicktime Conversion from Final Cut Pro 6, the output file has lost its colour depth and seems flat.
For example, i have a DV-PAL timeline and want to export a mov file using QT Conversion and the DV-PAL setting, the file's colour is different to fcp.
What could cause such a problem? i never encountered such a problem running on an older system.
Please help!

i have tried checking and unchecking 'Enable Final Cut Studio color compatibility', and i do not see a change. i have even tried opening the file using the old Quicktime player, but both the new Quicktime x player and the old one look identical.
i appreciate your help!

Quicktime Conversion Export Takes Way Too Long

I am using FCE2.
I have a 28-minute project that I am trying to export to a quicktime movie. (h.264 640x480 29.97FPS)
Every time I export, it takes 6 hours to complete! When I play it back, the quality is bad. It skips like there are not enough FPS.
I have tried adjusting the compression, size, FPS everything...but it just doesn't come out right. I have the latest versions of quicktime pro, and FCE2.
Something is wrong. Isn't 6 hours way too long? My computer gets real hot and the fan is constantly on while it's crunching.
What do I need to change? Any suggestions?
Thanks

Ah I think I figured it out.
I did another test project with the same source DV file, but didn't do ANY editing to it.
It took 2 minutes to export a 70mb reference mov file from a 7 minute DV sequence.
Then I cropped & resized the sequence by changing parameters in the "motion" tab.
Then it took 20 minutes to export a much larger reference mov file from the same 7 minute DV sequence.
Then I clicked "render all" after selecting every render option in the drop-down menu.
Then it took less than 1 minute to export a 70mb reference mov file from the same 7 minute DV sequence.
So I guess I was having problems because I didn't render "everything", because I didn't select "FULL" on the drop-down menu for rendering. I thought only RED segments in the timeline needs to be rendered prior to export, but apparently the "FULL" render must be selected as well so that the entire timeline is nice and purple. (or some shade of blue)
Also, a cropped and resized video is very large in size (GB) if it is exported as a reference file only without prior rendering. * Can someone else confirm that this is the normal behavior in FCE? *
Oh well, lesson learned.. This movie is going to take a very long time to export, and result in a very large file. But I can't use it without cropping & resizing it!
Message was edited by: Yongwon Lee

Final Cut 7 CRASHES during Quicktime conversion export

Does anyone else have this problem. The error message says it might be the FLV plugin? It doesn't even het to the options window... just crashes.

I don't know if this will make too much of a difference, but if you can, try using Compressor. It's a bit slower and more clumsy than a direct QT conversion or Export, but it should do the trick. As a bonus, if anything does go wrong, Compressor might offer a more detailed error report.
Hope this helps!
Titan

Trouble Exporting to 16:9 with Quicktime Movie or Quicktime Conversion

I have created a 5 minute movie using shots taken from my Sony HDR-FX1. The shots were native 16:9. They imported fine into FCEHD. While editing in FCEHD, the clips all displayed in the viewer as 16:9. When I exported to Quicktime Movie, the resulting product was 16:9. When I exported using Quicktime Conversion, my product became 4:3.
Having read other posts here, I looked closely at all clips (which were all checked as Anamorphic), and my Sequence (which was not checked Anamorphic -- but was instead HD1440x1080). I then created a new sequence, which was checked as Anamorphic, copied my clips to it, then exported it. It got worse. Now, it exports 4:3 using both Quicktime Movie and Quicktime Conversion.
I then created a new project, created a new sequence set to Anamorphic, then copied one clip into it from my earlier project and exported it -- same result. I then imported a clip into this new project from the original files from my camera and exported -- same result.
One final note, when looking at the Frame Size in the properties of my sequence and clips, it is set to 720x480. And, when I look at the Get Info on the exported files of the original, I see 1920x1080 (Quicktime Movie export) and 1440x1080 (Quicktime Conversion export) before I created the new sequence; then 720x480 in both after I created the new sequence.
Any help you can provide would be incredibly appreciated!
Dan

You are right. My original sequence was marked as HD. When I exported that one to Quicktime Movie, it displayed 16:9.
Then, I created a new sequence that was 720x480 and checked as anamorphic. That one, exported with Quicktime Movie and/or Quicktime Conversion was 720x480 and was squeezed into 4:3 rather than displaying in Quicktime as 16:9.
Last night, I burned this to DVD using iMovie and it displayed properly on my 16:9 television. But, alas, it is squeezed on my 4:3 television (rather than letterboxed).
Also, I exported to Quicktime Conversion and used "custom size" of 720x405 and achieved a movie that will play in Quicktime as near 16:9 so I can put it up on the web in the right dimensions.
Is there a better/easier way to export footage shot 16:9, edited 16:9 so that it automatically exports 16:9 for use in Quicktime and/or on a DVD?

Multiple problems when exporting 16:9 HDV using Quicktime Conversion

Hello,
I am trying to export a 41-minute long video so that I can post it online. It is in 16:9 HDV Widescreen format, and the computer I am using is an iMac G5 2.1Ghz PowerPC with 2.5GB of RAM. I've been having the following issues so far:
1. It doesn't export the entire video when exporting to WMV. It stops after only a few minutes of exporting, and then when I check it to see how it came out, only the first few minutes of my video are there.
2. When exporting using Quicktime Conversion to being an actual Quicktime file (.mov), it starts but then it stops at 7% and the "Estimated Time" increases from "about 2 minutes", to "about 5 hours"...and then THAT increases a few minutes later to "about 7 hours". I've already increased my memory to 2.5GB (which unfortunately is the most amount that my computer can fit).
3. So far, for .mov, .divx, .wmv, .m4v, and .mp4, I've been having a lot of trouble trying to figure out the exact settings that I should be using for 16:9 widescreen (dimensions, formats, etc). A lot of times, the video has become 4:3, with the video itself stretched from top to bottom (it looks very weird like that).
Any ideas on what I should do?
Thanks.

Hi,
I have the same problem and I can't believe Apple did not think about that. Each time I'm doing a 16:9 movie, it doesn't work with QuickTime conversion.
Read this site, it might help you. I'm gonna try the solution they're talking about.
http://www.fcpbook.com/Video8.html
Mart (From Montréal, Can)

Exporting HDV to Small Quicktime Movie

I need to export an HDV sequence (1440x1080) to a 320x240 Quicktime movie. Can anyone please help me on how I can export this and maintain the aspect ratio. I have tried to export it using the Quicktime conversion, but it comes out squished. Any tips would be greatly appreciated. I am currently using Final Cut Pro 5.

Why 320X240? It's a 4:3 aspect ratio, and the only way you'll get your 16:9 images in that size is to letter box it in a 4:3 sequence, then export that letterboxed movie... Or use a pan and scan technique (cropping the original) and fill a 4:3 aspect ratio that way... but you can't get a 16:9 aspect ratio of images to fit right in 4:3 aspect any other way... other than to export as a 16:9 movie.
You can in QT conversion, select it to be letterboxed using the H.264 codec too I think if it must be that size. I think 320X180 would come out right using compressor instead...
Jerry

Export-- Quicktime Conversion totally corrupts??? (help!)

Ok,
in FCP 5.1.2 in an HDV timeline (1080i, Sony Z1U) my clips play fine.
When I export to quicktime movie, my HDV movie works great and I can convert it to other formats, including DV/NTSC standard def.
However, if I try to (directly from my HDV timeline) export to quicktime conversion (DV/NTSC codec, high quality, 720x405 standard definition 16:9) things get weird. some of my movie looks and sounds good, but seemingly random clips from my movie are out of sync. I examined it carefully and found that during the export, some clips actually shifted around timecode-wise. Hard to explain. Basically, within my exported SD movie, some clips from my timeline start a half second or so before they actually should.
My movie is a documentary. When it cuts to someone for an interview, for example, playing the timeline shows them begin speaking when they should. Export to an SD version, and suddenly when it cuts to the speaker, they are looking at the camera, and then blink a few times, and then begin speaking, even though the audio is playing out of sync now with the video. Somehow FCP is reaching into my clips' handles-- footage that is not even visible in any track-- footage that is before where the timecode says the clip should start.
examining the files directly in the finder reveals all to be well, as far as i can tell. but obviously there is corruption of some kind, either the codec or my drive. but I tried two different computers and it did the same thing.
anybody understand my problem? make sense at all? my FCP problems never seem like problems others have had.

I think you need to do that render/resolve thingie before exporting HDV...
Patrick

File export using quicktime conversion quit!!!

I am trying to export a 3 minute film and I have just downloaded flip4mac studio as my client needs it in wmv format. I exported the film yesterday to a quicktime format, so they could watch it online. But today, after i downloaded flip4mac studio when I click on file > export > using quicktime conversion the whole of fcp just quits! when i click on file > export > quicktime movie it is fine, it just seems to be when i click on quicktime conversion. What is going on, it was fine yesterday!!!
I am using final cut pro version 5.1.4. Please help me because I don't know what the **** is going on!?!

I have a mac pro, 2x 2.66 GHZ Dual core Intel Xeon, 2 GB RAM, 1ST hard drive, free space 136GB - second hard drive 204GB. Operating system: Mac OS X 10.4.10 - Quicktime version 7.2.0 - player version 7.2. - Flip4Mac version 2.1.2.72, flip4mac wmv studio, downloaded and purchased from their site.
My project details - filmed on Sony Z1 in HDV, captured via firewire (preset HDV), device preset Sony HDV 1080i 50, sequence preset, HDV - 1080i 50.
These the normal settings i usually use for all the projects that I have ever done. Have I always set it up wrong or am I just going crazy? Also do I need a separate plugin to connect flip4mac and final cut? I have never used flip4mac before, so I don't really know how it works!
I googled 'flip4mac final cut plugin' and it said:
Final Cut Pro: Flip4Mac MXF components may cause unexpected quit
Issue or symptom
With more than one Flip4Mac component installed, Final Cut Pro may unexpectedly quit when you open it in Mac OS X 10.4.10.
Products affected
Final Cut Pro
Mac OS X 10.4.10
Flip4Mac MXF components
Solution
Delete or temporarily remove the following items:
Library/Application Support/Final Cut Pro System Support/Plugins/Flip4Mac Editcam Plugin.bundle
Library/Application Support/Final Cut Pro System Support/Plugins/Flip4Mac XDCAM Plugin.bundle
Library/Application Support/Final Cut Pro System Support/Plugins/Flip4Mac Profile Plugin.bundle
Library/Preference Panes/Flip4Mac Editcam.prefPane
Library/Preference Panes/Flip4Mac XDCAM.prefPane
Library/Preference Panes/Flip4Mac Profile.prefPane
Library/Frameworks/Flip4MacPro.framework
Library/QuickTime/Flip4Mac Editcam.component
Library/QuickTime/Flip4Mac XDCAM.component
Library/QuickTime/Flip4Mac Flip4Mac Profile.component
Is this relevant to my problem?
Thanks for your help.

QuickTime Conversion Exporting HDV

Similar Messages

Maybe you are looking for