Quicktime Conversion for PS3

I have the HV-20 and a PS3, I'm trying to put a test clip on a USB drive then watch in HD through my PS3. Sony says the PS3 can only use MPEG-4 format, so I used FCE to do a quicktime conversion and export the clip into the correct format. It comes up under MP4 (ISMA) but I could only get the custom field under image size to come up using just MP4. I messed up and used the 1920x1080, when the HV-20 only does 1440x1080, but still when I played it on the PS3 not only did it look horrible it was also in 4:3 instead of 16:9 ratio. Why is this? Can you tell me which settings will give the correct look on playback with the PS3?

OK, I just tried a size "passthru" export encoding and got a "unsupported data" error on the PS3 with 2.1 firmware! I believe these files had previously played back in 4:3 format (literally 1440X1080 with no horizontal expansion) using previous firmware.
The coding times are so long it is difficult to run through all of the possible combinations in a reaonable amount of time.
The file does play back in 4:3 in QT player. Evidently, the 2.1 firmware either disabled 1440X1080 video or added a check to refuse playback with no anamorphic expansion flag set.
In a way it kinda makes sense that QT would play it because it has to support odd sizes such as that, whereas 1440X1080 non-anamorphic would not be a standard HD format.
I opened the file in QT-PRO and scaled the horizontal width as follows:
window-->show movie properties-->select video track-->visual settings-->uncheck "preserve aspect ratio" -->revise horizontal "scaled size" to 1920 -->file-export mp4-->options-video format "passthrough"-->save
The file now plays in 16:9 in QT, but still shows as "unsupported data" on the PS3.
from searching the web, I get the impression that the mp4 specification for horizontal scaling has somehow diverged from the original QT method. From there it seems to digress to people resorting to low level HEX editors to sort things out (good grief!).
reference---http://forum.doom9.org/showpost.php?p=988006&postcount=2838
Actually, I am not sure why a scaling flag would even be required for true HD since there is no legitimate 1440X1080 4:3 aspect ratio format in the AVCHD spec
http://www.avchd-info.org/format/index.html

Similar Messages

Quicktime conversion for moving subjects

Hi everyone,
I have filmed cricket and football matches and exported from FCE using quictime conversion (h.264) and then burned a dvd with Toast. The end result is that rapidly moving balls and arms and legs etc seem to flicker and a double image is seen. The rest of the pictures (slow moving/stationary objects) are crystal clear. When i viewed the exported quicktime files on the TV monitor they looked fine. I am wondering if there is a better option than H.264 for rapidly moving subjects, or is the problem more likely to be within Toast? (I burned at 8mbps and 4x)
Thanks for any help!

Export to QuickTime Movie not to QuickTime Conversion.

Creating Chapters using quicktime conversion for iDVD?

I'm gonna make this as simple as possible.
Please do me a favour and read this first: http://support.apple.com/kb/TS1611
So I cant export as 'Quicktime Movie', instead follow the instructions and export using 'Quicktime Conversion' Ok thats fine but..........
WHAT ABOUT THE CHAPTER MARKERS?!!!!!!!!!!!!!!!!!!!!!!!! SOMEONE HELP ME!!!!!!!!!
.........thanks

https://discussions.apple.com/message/9408556#9408556
Al

Quicktime conversion for web...

am usually good at this!
i have a quicktime movie, about 270 megs (short).
i want to post it on the web; i tried making an mp4; set it up in dreamweaver, uploaded to the web, and all i get is the "Q" symbol.
i tried changing "mp4" to "mov"; plays locally on my mac!
what settings do i use to get a smaller-file, half-size, qt movie on the website??
and should it be an mp4, or sorensen 3, or??
thanks!

Please post a URL so we can check the page code and the .mp4 file.
270 MB's is not a small file. What software did you use to create it? What is its current size and what codecs were used? Use the Movie Info window to find out and post back.

Aspect ratio problem with Quicktime Conversion from FCE HD 3.5

I have a FCE 3.5 HDV project (16:9 aspect ratio) which I am trying to export using Quicktime Conversion for eventual web-streaming. I have tried various settings including "maintain aspect ratio" and the "letterbox" options. After every multi-hour attempt, the end result is just what I need, except the aspect ratio is always 4:3 and vertically squeezed.
What settings should I use for a small to medium sized version of my movie for streaming on a website, but in the correct aspect ratio? I'd prefer a 16:9 Quicktime frame, or at least a 4:3 Quicktime frame with black bars.

I too have been having some problems, same software. Export to iPod completely ignores the intended aspect ratio and is non-adjustable and squeezes the footage. It looks fine on the canvas but gets messed up on export. A 4:3 video that should be 640x480 ends up being 640x426, and a 16:9 video that should be 640x360 looks to be getting 640x426 as well.
Currently, my work-around is to export to DV file, then export to iPod. Being a double encoding, it is quite wasteful in terms of time and processing power. Is there something else I can do?

Instead of Compressor went Quicktime conversion (still problems)

Hi,
Thanx for all the suggestions regarding compressor. I didn't even consider doing Quicktime conversion for my DVDSP2. I did this last night with a two pass knowing it would take along time. After about 9 hours with some 18 to go ( the piece is 78 minutes) I got two errors, one from my system and one from FCP. FCP simply said "Out of memory". And what I'm assuming was from my system with the yellow triangle and exclamation point. "Your startup disk is nearly full. You need to delete some files."
What I don't understand about these is that I had "video" as my destination. This is a drive within my firewire drive that I had earmarked for just video and it has 23GB of memory in it which should be enough for this piece. Am I wrong?
I know that the other internal drive that I have just for graphics such as video does have a lot on it. A 200GB drive, it only has about 5GB left of memory. Can anyone enlighten me or point me to some articles.
Thank you in advance,
John

Your system drive functions as a virtual memory device. When the software you are running requires more memory that the physical ram you have, the hard disk pages in and out of RAM as needed. Since your spec doesn't mention ram below, I don't know how much you have, but once it filled, overflow started to fill up your system drive. If that becomes full, the system itself could shut down.
You can think of the disk as a pantry and shelf space and RAM as the kitchen table and counter top. When you run out of space for food preparation, you can put stuff back in the pantry or put partially prepared recipes on shelves for later completion.
And please don't call disk space MEMORY - it is not memory. Memory is RAM. Disk space is storage. Also, I should mention that the efficiency of your hard drive drops off SIGNIFICANTLY once it gets over 90% full.
make sense?
Patrick

DO ANY OF THE QUICKTIME CONVERSION SETTING ALLOW FOR WEB FRIENDLY HD

i have a 3 minute movie....i want to make it sendable via the internet....it is current HD with 1440 x 1081 aspect ratio.
It seems to me the Export - Using QuickTime Conversion option would be a great solution....however every setting i choose renders beautiful small file sized QuickTime movies with one major problem....THE ASPECT RATIO IS 4 X 3 AND I DON'T KNOW HOW TO EITHER CHANGE IT OR WHICH SETTING I SHOULD CHOOSE INSTEAD?
These are some of the settings i've tried: h263, h 261, h262 and so on.... each one has is unique problems either cropping the image or squishing letterbox into 4x3 aspect ration
Can someone please help me? Thank you Thank you thank you!!!

YOu need to choose a 16:9 resolution RATIO...meaning smaller size, but a 16:9 frame.
640x360...for example.
Shane

I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

I am using FC Express HD, and for some reason, when I export a Quicktime movie, the final movie will only play audio, and the video is black. I only get the actual video if I export as self contained, or if I exportusing quicktime conversion. Why?

QuickTime Conversion settings for preset options

Is there a place I can get the detailed settings behind the presets for QT Conversion exports? Would like to see the frame sizes, data rates, etc. for things like "iPod" "iPhone" etc.
Thanks,
billy

Hi(Bonjour)!
Yes you can tweak any parameters with the "export using quicktime conversion".
Just select quicktime movie format and click the "options" button at the right.
You'll get the Movie settings window. From this point, use the settings and size for video and setttings for audio.
The choice of your codecs will be directed by the intended use of your movie.
Michel Boissonneault

Is it possible to create a new preset for Export/Quicktime Conversion ?

Hi,
I was wondering if there is a way to make a new export preset for the Export with Quicktime Conversion, in FCE HD 3.5
I am working on preparing a file for YouTube, and finding that some of the video effects render differently when exported, so I am having to render a couple of tests, but with YouTube's new 640x360 16:9 format, there is no easy way to do this other than checking the settings at each export. If one could make a new preset, it would be much easier. Any ideas?
Thanks,
t

thankyousir.
I think that Apple could add this, easily, as a feature to what, essentially, is QT Pro, and its embedded brother in FCE. Apple could also release a tiny update for QT including the new YouTube format... I haven't checked if iMovie knows about this new resolution, though it does upload directly to the tube itself.
Thanks for your time,
T

QUICKIE - default settings for quicktime conversion export

Hi All...
Is it possible to set the default settings to still image when choosing export via quicktime conversion?
I do a lot of frame grabs and at present whenever i do an export via QT Conversion i have to change the default from movie to still image...can still image be set to the default and therefore be selected when QT Conversion is selected from export options?
I think that is comprehensive enough a question!
Thanks for any help or guidance..it will save a lot of mouse clicking if it is possible.
ta...Mike

Michael Grenadier wrote:
Here's what I do. Park on the frame I want to export. Mark In AND out, Make subclip...
Wow! I sometimes need to do a few frame grabs, and this is a great way to do it.
Good thinking.
there are a few other editors and often it is difficult to persuade them out of their comfort zones.
Gee and they still get work?
If I didn't get out of my "comfort zone" my style wouldn't change, I wouldn't be able to handle OS and suite updates, let alone move away from linear suites.
I understand that some people might want a quick and easy solution, a single button press, but this solution sounds like it isn't so hard to make editors run and hide.
If they do baulk and cry, I would suggest you find some new editors; cause they are never going to adapt and give your clients top quality stylish work.

Export Quicktime movie is not rendering video track, just the audio track. However, everything works when using Quicktime Conversion menu options. What is wrong with my setting for Export Quicktime movie?

Export>Quicktime movie is not rendering video track, just the audio track. However, everything works when using Quicktime Conversion menu options. What is wrong with my setting for Export>Quicktime movie?

When you converted the original files via MPEG Streamclip, what did you convert them to?
Have you tried trashing your preferences in FCP? Trashing FCP prefs is usually the first step when FCP is performing strangely.
Download Preference Manager from Digital Rebellion (free) at:
http://www.digitalrebellion.com/prefman/
It will allow you to archive your current preferences if you wish to restore them later.
MtD

Saving Settings for use with Export using Quicktime Conversion

Dear All,
Is it possible to save a set of settings for use with the Export using Quicktime Conversion feature? The reason I ask is that we have to export a quicktime of every tv commercial we make (using the same settings) and it would be great if "one click" could deliver the export settings we need.
All the best, Sean

Well, you can create a droplet from Compressor that would do what you'd like...
Open compressor and in the Help menu, Select the user manual. Navigate to page 315.
Jerry

Quicktime conversion settings for HD 16:9

I have a HD-wedding that I want to export for iDVD using 16:9. I use quicktime conversion because when I used quicktime, it looked absolutely awful.....using quicktime conversion, it is better quality BUT it comes out 4:3, and is tall and thin. Black barn on the left and right side. I have tried all the different settings, but it is still wrong. Can anybody tell me the settings I should use?

It is possible you have the incorrect field dominance set.
Click anywhere on your timeline and type Command + 0 {zero} to see your sequence settings. Either report what the sequence settings are or take a screen shot of them and post that here.
Now click on a source clip of video in your FCP browser. Type Command + 9 to see the item properties. Either report what the item properties for your source clips are or take a screen shot of them and post that here.
MtD

Audio and video out of sync when using quicktime conversion

hello,
i am editing a hdv project and want to export to quicktime. the client needs it in a specific size (700x394). they do not want the video in the file compressed, just the size of image. they are compressing the video through flash for the web. anyways, i used to just use quicktime conversion, custom size and use 700x394, but now when i do that the audio and video are sparadically out of sync in the product. the wierd thing is that the project plays fine in the timeline, but when i export the problem occours. i then, exported to a full res fcp movie and it is fine. then tired reexporting through qt pro to 700x394. when i did this their were no sync issues but the quality of the file was not so good, it look more pixely, certainly not as good as when i did it using quicktime conversion.
how can i export through fcp to get the 700x394 file? someone said 'use current settings' instead of using quicktime conversion? how do i do this? what do i need to do and what are my settings?
any help is appreciated. thanks a ton in advance.
cheers,
clay

What format are you converting the HDV to?
If it's animation, it is quite possible your computer can't pull the data rate. In this case it would be a processor / hard drive issue not an out of sync issue.
x

Quicktime Conversion for PS3

Similar Messages

Maybe you are looking for