QuickTime crashes after Video settings

I want to export my 3gp video to an avi, but when I click on the settings and into the video's settings, it just exit the whole program. I've re-installed and restarted my computer after each installation and it still doesn't help.

Okay, there is a solution for this.. I've read it somewhere else in this forum, but here is some more info and a couple of links.
You have to roll back your NVidia Display driver to version:
ForceWare Release 90
Version: 94.24
Release Date: May 31, 2007
+WHQL Certified+
*Direct link:*
http://www.nvidia.com/object/winxp2k94.24.html
+NVidia Driver Archive+
http://www.nvidia.com/object/winxp-2k_archive.html
You might wanna use Guru 3D Driver Sweeper to delete NVidia (display) driver files & settings leftovers
*Guru3D - Driver Sweeper*
http://www.guru3d.com/index.php?page=driversweeper
+I'm still not really, really happy.. but it's a fix.+

Similar Messages

  • Skype crashing on Video Settings Page

    Skype version 7.3.0.101 crashes while Iam on the Tools -> Options -> Video settings page for about a minute. As the webcam works and the video shows for about a minute, the application crashes.  Any help on this please ?

    Upgraded to latest Skype version 7.4.0.102. Interestingly the bug still exists.

  • ITunes want Launch, QuickTime Crashes after Installing

    After my laptop crashes to the BSOD, this is what the screen reads.
    A problem has been dected and windows has been shut down to prevent damage to your computer.
    If this is the first time you've seen this stop error screen
    restart your computer. If this screed appears again, follow these steps:
    Check to be sure you have adequate disk space.If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
    Check with your hardware vender for any BIOS updates. Disable BIOS memory options such as caching or shadowing.
    If you need to use Safe Mode to remove or disable components, restart your computer, press F8nto select
    advanced startup options, and then select Safe Mode.
    Technical Information:
    *STOP: 0X0000008E, (0X0000005,0X805274B8,0XA81B20C4,0X00000000

    I downloaded iTunes w/Quictime, I then installed itunes, and started the quicktime install My laptop crashed.
    I downloaded the QuickTime standalone installer,
    still my laptop crashed.
    I've done the 5 R'S suggested by Apple, with no luck,
    This is all I get.
    After my laptop crashes to the BSOD, this is what the
    screen reads.
    A problem has been dected and windows has been shut
    down to prevent damage to your computer.
    If this is the first time you've seen this stop error
    screen
    restart your computer. If this screed appears again,
    follow these steps:
    Check to be sure you have adequate disk space.If a
    driver is identified in the stop message, disable the
    driver or check with the manufacturer for driver
    updates. Try changing video adapters.
    Check with your hardware vender for any BIOS updates.
    Disable BIOS memory options such as caching or
    shadowing.
    If you need to use Safe Mode to remove or disable
    components, restart your computer, press F8nto
    select
    advanced startup options, and then select Safe Mode.
    Technical Information:
    *STOP: 0X0000008E,
    (0X0000005,0X805274B8,0XA81B20C4,0X00000000
    Can anyone help?

  • I phone 4 completely crashed after network settings reset?

    hello
    i recently experienced difficulty in connecting to wifi on my iphone 4, i tryed a new wifi receiver in the phone but it still did not work. so i tried
    to reset the network settings on the phone, and ever since i have done that the phone just crashes every 2/3 minutes and it wont charge....but says it is charging. i tried to do a hardware reset and also tried rebooting it through itunes, but due to it crashing it wouldnt work properly. the battery has now gone dead and the phone wont even turn on.....although when i plug the charger in the screen lights up and i see the apple icon.. but then nothing happens?? im completly confussed, does anyone have any ideas whats wrong with it????

    It doesn't matter how competent you are or how many screens you've replaced.
    There are NO legitimate sources for iPhone parts. Apple doesn't sell iPhone parts. The only possible sources are counterfeit parts, stolen parts, salvaged parts, or just plain cheap knockoffs.
    Your forfeited your ability to get service or support from Apple the minute you opened the phone.
    Obviously, something is broken. Find a competent 3rd party repair shop, ask your question someplace like ifixit.com, or buy a new phone.
    You can't get advice here on how to fix it.

  • ITunes 10.3.1 crashing after video plays

    This does not happen every time, but frequently enough to be a pain.  I am to the point of avoiding playing videos now as when it crashes, it stops responding and I must go and end the program manually through the Task Manager.
    I am running Win 7, 64 bitand have a fairly new computer, so it should not be an issue of old hardware.
    Any suggestions appreciated.
    Thanks

    Ditto happening to me as well.

  • X220 crashes after video driver

    I have installed a 64GB Transcend mSATA and installed Windows 7 64bit from a DVD (using the DVD drive on the base pad). Windows installs fine, the problem seems to occur when I try to update the video driver. The file that seems to be causing me the trouble is the 'Intel HD Graphics Driver (Integrated) for Windows 7 (64-bit)'. However I try to install, it goes smoothly, then asks to restart. After that, I get to the Windows loading icon, but then it goes to bluescreen. Other drivers seem to install OK. Any help would be most gratefully recieved.
    Solved!
    Go to Solution.

    Hello,
    Check with Transcend to see if the latest firmware is installed in your SSD, then try installing all of the available updates for the system from Lenovo except the video driver and then from Microsoft via Windows Update, which may offer a different driver.  Does that make any difference?
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Quicktime crashes after opening

    Hey,
    I have to use Quicktime for some files in Adobe after effects but when i install and open QuickTime i will get an error:
    Problem statement:
    BEX
      Name of Application
    QuickTimePlayer.exe
      Version of Application
    7.74.80.86
      Time stamp of Application
    5180e5b5
      Name of Error Module
    StackHash_0a9e
      Error module version
    0.0.0.0
    Time stamp of error module
    00000000
      Uitzonderingsmarge:
    00000000
      Uitzonderingscode:
    c0000005
      Uitzonderingsgegevens:
    00000008
      Version of Operatingsystem
    6.1.7600.2.0.0.256.1
      ID
    1043
    Extra Infromation 1:
    0a9e
    Extra Infromation 2:
    0a9e372d3b4ad19135b953a78882e789
    Extra Infromation 3:
    0a9e
    Extra Infromation 4:
    0a9e372d3b4ad19135b953a78882e789
    I tried re-installing the program multiple times but this didn't help
    I'm using a Windows 7 64 bit O,S.
    thanks in advance.

    Hello Visji,
    Thank you for the details of the issue you are experiencing with QuickTime.  I recommend reviewing the following article for an issue like this:
    QuickTime: Windows troubleshooting tips
    http://support.apple.com/kb/TA44469
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Quicktime Broadcaster crashes after a few seconds

    Hi
    This will probably be all too vague for a good answer but thought I'd ask anyway...
    Does have experience of Quicktime Broadcaster being unstable? I've tried using it with a USB webcam (logitech pro 9000) device that works fine with other apps on the Mac and an XP laptop but once broadcasting (to Darwin STreaming Server on another machine) QT Broadcaster crashes after a few seconds or minutes, or when you try to use another application. Looks like memory conflicts but it worked for much longer periods of time earlier this year but after the usual upgrades to 10.4.xx (to 10.4.11) it's become unuseable.
    I was wondering if anyone knew if upgrading to 10.5.xx would sort the problem out?
    Any help or pointers much appreciated.
    Bill

    I'm using the latest version of QT Broadcaster (1.5.2) on a MacBook running OS 10.5.6, using an old external iSight camera for the video input, and I can broadcast for hours without problems. I would recommend an update to Leopard. I might also suggest that you perform a hardware test and check your DRAM, just to be on the safe side.

  • Quicktime crashes when opening a video file

    After installing Snow Leopard, Quicktime X will not play any of my video files. It crashes after I select a movie file from the menu. These are MP4, MOV and Avi previously created with QT7 and iMovie 09. I installed the QT7 from the Snow Leopard disk with the same results. All movie files play on the remaining Leopard (not upgrade) Mac.
    Any Idea?
    Thanks, Dale

    The files I'm most concerned with playing are my animations exported from Final Cut and from another system's quicktime. These usually are quicktimes or .wma's that are either uncompressed or with a variety of compression, usually DV-NTSC, H.264, HDV 1080 60i, or mpeg4 for the web. But as I've professed before, it seem that the file type isn't necessarily factor. Any video file that should play in Quicktime does not and the program crashes. Upon this I get a very vague error message which reads "Quicktime Player has encountered a problem and needs to close. We are sorry for the inconvenience." That unfortunately is as much detail as I can give at the moment. I know this is a vague problem and that my information is just as vague, but that is all I have gathered. Anything is appreciated.

  • Trying to go to video settings crashes skype

    I have recently bought a web cam IT-105WC from INTEX. After installing the web cam and going to video settings, skype crashes.

    Please post event viewer log in your very next reply.
    Click Start >> Run >> Type eventvwr.msc /s
    Custom Views >> Administrative Events
    Look for any error message related to Skype crash.
    Regards,
    Tamim
    Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
    If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

  • Quicktime closes when trying to change video settings

    I just bought PRO and now i cant even use it. I open my avi file, go to export and when i go into options and i click on SETTINGS for video quicktime beeps and closes... no warning message no error NOTHING. i can get into the audio settings just not the video. And its bothering me that theres no official support COME ON APPLE i just gave you money at least give me a telephone number come on.

    I have the same problem - I have a MP4 movie file that's using the H264 codec that I need to play via a PowerPoint presentation - so I need to convert it to something more Windows friendly. I wanted to export the mp4 as a AVI using one of the lossless codecs I have which I would then convert to a WMV file using Windows Media Encoder. The minute I tried to change any video settings on the export feature on QT Pro QT Pro crashed. Of course looking around the QT page for any support information is pointless (because it's not there) - and I purchased Pro with QT 7.2 and can't revert to another version.
    And looking around the +QT for Mac OS+ forum this is not just a Windows problem - it's a QT Pro 7.2 problem. I thought Apple applications were flawless and didn't crash??? +<insert sarcasm>+ Anyway...it would be nice to have something that works for my $30 rather than a overpriced video player.

  • Quicktime crashed and deleted my video file??

    I trimmed a clip with quicktime and tried to iMessage it. Quicktime crashed and took the file off my camera. How do i retrieve it?

    This happened to me as well. Trimming in Quicktime Player, hit Share to upload to Vimeo and Quicktime Player crashes with a "can't create file" message. After force-quitting, I notice that the ORIGINAL file (that had been captured with Blackmagic Design Media Express) has been DELETED!! This is a major bug. I spent a good 30 minutes trying to figure out where one of my video files had gone and ended up re-capturing it only to have this happen again.

  • Quicktime crashes when I attempt to change export settings.

    Everytime I attempt to change my export settings in Quicktime 7 Pro (File>Export>Options>Settings) Quicktime crashes. I can open the Options window and see what compression I am using etc but as soon as I click on Settings or Filter or Size the next window opens for less than a second and Quicktime crashes along with an annoying tone from Windows.
    I have uninstalled and re-installed Quicktime and iTunes with no change. I have also done a complete reinstall of XP home edition including downloading all the security updates, Service Pack 2 etc and I get the same error. This is a new problem because I had been doing this with no trouble just a few weeks ago.
    I have also run into some errors if I attempt to update Quicktime. The errors are different depending on the way I try to update.
    Going to Edit>Quicktime Preferences>Update Tab>Update I get the following error.
    An exception occured while trying to run "Shell32.dll, Control_RunDLL" C:\Program Files\Quicktime\QTSystem\Quicktime.cpl"" If I leave that error window (labelled Run.DLL) open I then get Run a DLL as an App has encountered a problem and needs to close. We are sorry for the inconvenience. and it asks me to send an error report etc etc...
    The other update error I get is if I go to Help>Update Existing Software I get
    Microsoft Visual C++ Runtime Library
    Buffer Overrun detected!
    Program C:\Program Files\Quicktime\QuickTimePlayer.exe
    A buffer overrun has been detected which has corrupted the program's internal state. The program cannot safely continue execution and must now be terminated.
    I've never seen Quicktime act this buggy until recently. This occurs with 7.1. 7.1.3 and the newest 7.1.6.
    Custom   Windows XP  
    Running updates with the Apple Software Updater seems to work without any errors.

    Okay. I don't know if anyone's reading this thread anymore but there is a work-around. It is a conflict with Quicktime and Nvidia cards. If you go into your display properties then click settings and click advanced, then click Troubleshoot. Slide the hardware acceleration slider all the way to the left. Disabling this does fix it. I know Quicktime and Nvidia are being asked for a fix but in the meantime, this does work.
    David

  • When iPhoto '11 crashes after importing photos and videos, they are gone. How can I retrieve them?

    iPhoto '11 randomly crashes after importing/editing/organizing photos and videos. When it does, photos and videos that I've been working on are gone. Pictures taken with iOS devices can be retrieved if they are still in Photo Stream, but videos are gone. Is there anyway I can retrieve photos and pictures that are not saved before iPhoto crashes? Also, is there anyway to prevent it from crashing? It seems iPhoto '11 is doing this since the day 1 I started using it. Thank you.

    Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library
    this should help with the crashes - it may or may not help with the missing videos
    LN

  • Why doesn't Frontrow take the same video settings from QuickTime?

    Hi,
    I would like to play my video's in Frontrow. But when I do that, they aren't stretched on the entire screen. There are black sidebars. So I changed in Quicktime my settings for fullscreen, so the aspect-ratio from the video is equal to that from the screen. But it won't work in Frontrow. Someone knows the answer to this, because it's pretty important.

    Front Row does use QuickTime to play videos, but it doesn't use the QuickTime Player directly. So, the QuickTime Player's preferences are not referenced. When playing DVDs, most DVD Player application preferences are ignored, but some are referenced. For example, if you change the DVD Player to use the digital optical audio of your computer, Front Row will use it the next time you play a DVD. So, it must be possible to get Front Row to look at some of the other preference files. I would suggest you send Apple some Mac OS X feedback so they know you'd like to have more control over the video playback options in Front Row.
    Doug

Maybe you are looking for