Quicktime desktop recording use almost 100% of cpu!

When the video recording of the desktop is on, my Macbook pro (2.4 GHz, 8 Go ram, mid-2010) become really slow. Quicktime then use near 100% of the CPU. So I can't do the task I whant to record (someting like a tutorial).
Is there a solution for this? I tried Voila app and IT WORK PERFECTLY. So, what's the deal with quicktime?
Thanks,
SL

Thanks for the reply,
Turned flash off but it made no difference, Facebook home page still shoots Firefox cpu up to 100%.

Similar Messages

  • ITunes uses almost 100% of CPU and slows PC down

    Recently I decided to start using my iPod touch 4G again and downloaded the latest version of iTunes.
    Upon launch, iTunes acts normally until about 4-5 minutes of being open (just in idle). It then happily proceeds to use up 100% of my CPU load and slows my entire PC down to a halt, even once I've closed it (iTunes).
    I've tried re-installing it, downloading a different version, disconnecting from the internet, practically everything and yet the problem persists.
    My PC specs are as follows:
    Amd FX Piledriver 8-Core FX-8350 @ 4.0GHz
    Powercolour HD7990 Devil 13
    G-Skill 1866Mhz 16Gb memory
    OCZ Vector 128Gb HDD / WD Caviar Green 3TB
    So I can assure you, this is NOT hardware related.
    I've tried the following method with no results.
    1) Click Start and type "cmd" (without the quotes) DO NOT press enter or Ok yet.
    2) Right click "cmd" in the search results at the top of the start menu and select "Run as Administrator".
    3) In the command window, type "netsh" and press enter. (Without the quotes)
    4) In the next prompt, type "winsock" and press enter. (Without the quotes)
    5) In the next prompt, type "reset" and press enter. (Without the quotes)
    6) Reboot the PC. (Do not skip this step)
    I've also been through the list of conflicting software and have none of the mentioned.
    I'm running Windows 7 with the latest updates.
    I'm getting extremely frustrated now. ANY help would be appreciated.

    Sorry. I did a search, and a lot of threads came up. The one I chose, I thought, explained WHY it happened.
    Maybe you'd get answers more helpful to you, if you went throught the search results.
    Sorry I wasn't of any assistance.

  • Firefox using almost 100% CPU - hogging resources - hanging

    After several hours of operating Firefox starts using almost 100% CPU - with peaks of 100% occurring in rapid succession - FF hangs until CPU useage drops below 100%
    Followed recommended troubleshooting as recommended on this site:
    * Started in Safe mode - no problems occurred.
    * Disabled all extensions; Plug-ins left operating.
    * No replication of problems.
    * Enable 1/2 of extensions up to Flashblock - restarted - seems ok
    * Enable most remaining extensions
    * (There are 3 Java extesnions - only enabling one) - again seems ok
    * Some hours later - problem reoccurred. Each time CPU useage peaked at 100% (according to Task Manager) the Firefox Window flickered & was unresponsive.
    * Deleted cache - no change
    * Disabled recently added programs - no change
    FF opens and closes normally & completely. '''Problem only seems to occur after FF has been operating for some time'''
    This has occurred intermittantly before but has become chronic over the last few days. Apologies if I've been repetitive or explained poorly - FF has hung several times while typing this.

    No issue for me, after 4 loops my CPU load was around 18%.
    Firefox 33.1.1 under Windows Vista.

  • Process: "kernel_task" taking up almost 100% of CPU

    A few hours ago, I noticed my MBP start hanging and generally processing very slow. Apps would freeze at random times, and generally a lot of odd behavior.
    I checked the activity monitor to see what might be causing this. It turns out, the process "kernel_task" is using almost 100% of my CPU. It has stayed within the 70-100% range, and has yet to go down. I tried many things, including restarting my Mac many times, but it remains the same.
    Does anyone know why "kernel_task" is taking up so much of my CPU? Is there a way to somehow "reset" the process to get it back to normal? Any help would be much appreciated, since my Mac is, for just about all purposes, useless right now. It took me about an hour just to get to this page and type this message.
    Thanks in advance!
    P.S. I attached a screenshot of the process in the Activity Monitor. You can view it here: http://images12.fotki.com/v203/filejMEm/9ae47/8/1659168/8691947/kernel_task.png

    I just want to add that I think the "kernel_task" might have started eating CPU when I stopped a RAR program in the middle of extracting an archive. I'm not 100% sure though that this is when the problem started.

  • Why is my quicktime screen recording using 200% CPU?

    When I try to make a screen recording with quicktime, it uses 200-300% of cpu, making it impossible to record myself using any cpu-intensive applications.  Is this normal?  Are there any settings anywhere that I can change to make recording less resource intensive?

    Sorry, forgot to mention I am on OS X 10.9.3

  • Desktop recording using flex

    Hi,
    I am new to flex. I want to know that is it possible to record remote user desktop screen using flex and to save the recorded video to flash media server?

    Wow, thanks so much Bob - that is some absolutely fantastic information. 
    I converted one of my Presenter courses to a fully functional EXE file in about 5 minutes with the SWF Maestro Exe trial!  I have been trying for years to find a solution to turn my Presenter files into single, flat file and that seems to do exactly what I need.
    Your sample training course is really nice - you did a great job with it!  I know how much work it can be to get the PPT file, transitions and audio to work just right like you have.  I have 15 eLearning files that have hundreds of hours of work on each one!

  • Tasks using over 100% of CPU?

    There are a few Root tasks that occasionally use more than 100% of my CPU according to my Activity Monitor. One of them was at 148% at one point.
    There is usually just one Root task that uses that much CPU whenever I open my Macbook from sleep or it just happens at random times. And the only way to stop it is to force quit the task that is making it do that. It all started after I was ripping a DVD using iSkySoft and it froze so I had to force quit. Once it quit, the CPU problem came up.
    Why does it do this? Do I just have to check the Activity Monitor every now and then to delete the Root tasks that use a lot of CPU? Is there a way to permanently make it stop?

    Well the root task problem stopped but now I just turned on the computer and Finder was using about 80% CPU for some reason but it seems to be working now after I quit it in Activity Monitor and brought it back up again.

  • AppleMobileDevice using upto 100% of CPU, pls help

    I have recently downloaded itunes 10.5.0.142 and since then I'm having major problems.
    When i start up the computer the AppleMobileDevice is using 100% of the CPU and won't allow me to do anything until the process is stopped.  When i do finally get on to itunes i cannot connect to ITunes store.
    I have tried removing all of the Itunes, apple software and quicktime and reloading it but the same problem still occurs.
    Any advice please?

    ssls6 wrote:
    4) I would remove finder plist files (com.apple.finder.plist from ~/Library/Preferences)
    This is less effective than it once was because Mavericks caches plist files, so even if you trash the plist file(s) it will continue to use the cached versions, & if anything in one of them is updated, the cached version gets written back to the Preferences folders, making it harder than it used to be to get rid of corrupted ones.
    Supposedly, you can force the cached version to be flushed with a "defaults read" Terminal command, but you need to know which domain name to use with the command for this to work. (See the man page for defaults for the appropriate syntax.)
    For some plist files an immediate restart does the same thing, but unfortunately many Finder plist files are updated at shutdown or log out time, so this is sort of hit or miss.

  • Premiere cc & media encoder update and it doesn't use anymore 100% of cpu,why?

    hi
    i don't like always to update programs
    but yesterday i update premiere to version 7.2.2 and adobe media encoder and others , in short i updated everything
    well i started to render a video and i noticed that adobe media encoder (during the rendering) did not use all my cpu
    in the prev , i used the 90% of my cpu
    my cpu it's the last intel 4 core (8 vitual) 4Ghz
    but the new verstion uses not more then 50% , don't know how much gpu does it use , can't find a program to monitor under w8.1 pro 64bit
    what's wrong?
    is there a way (option) to let media encoder to use all my 100% cpu?
    is there a way to check how much gpu does it use?
    thanks

    Hi Thomas,
    Thanks for your reply.
    It doesn't appear to be the problem though. The encode I have running at the moment has been going for the last 13 hours and in the last two hasn't once got any further along!
    Current elapsed time for a 30 minute film going to MPG2 is 13 hours and 18 minutes! Seems a touch excessive for just muxing!
    Any other ideas? Would be really grateful for any advice as Adobe Media Encoder is becoming very unreliable and I have tonnes of encoding to do!
    Many thanks

  • ITunes Using Up 100% of CPU

    For some reason iTunes was using 100% of my CPU, for some reason I thought the iTunes library may have been corrupt, making iTuunes use 100% of my CPU when I started it. So I deleted my .itl file and imported all of my music again, so now all my songs are in iTunes and it seemed to work. Then, as part of my settings, I turned on the souncd check, now iTunes uses 100% of my CPU and doesn't respond when I open it, how can I fix this?

    Sorry. I did a search, and a lot of threads came up. The one I chose, I thought, explained WHY it happened.
    Maybe you'd get answers more helpful to you, if you went throught the search results.
    Sorry I wasn't of any assistance.

  • Problem with oracle using up 100% of CPU

    Could anyone tell me what cause oracle to use up all the clock cycle?
    This problem occured when I tried to load a jar file to the server and it paused at the resolving stage for a really long time without any errors.
    I checked under task manager and found that the cpu is taking up 97-99% by Oracle.exe.

    Originally posted by Peter Duong ([email protected]):
    Could anyone tell me what cause oracle to Hi,
    In order to confirm whether resolving is taking much time during loading,can you load it without the resolve option of loadjava and find out how much time does it take.
    Regards
    Anand
    null

  • Quicktime screen recording error.

    Hey, I was wondering if there is a fix for Quicktime screen recording, because almost everytime I use screen recording, Quicktime crashes within two minutes. Before mountain lion quicktime was fine, but now the screen recording doesn't work, because of a "kernal" error. If anyone can help, that would be awesome.

    peljmies
    You have resurrected an ancient thread by posting in it, and since there was no answer in IT, it may be that your Question would benefit from starting an New Question!!
    I would title it something like "  QT screen recording crashing with alert "The operation couldn’t be completed. (OSStatus error -536870186.)"  "
    (Before you post, double check the error alert message text)
    Include as much of the following as possible:
    Quoted from  Apple's "How to write a good question"
       To help other members answer your question, give as many details as you can.
    Include your product name and specs such as processor speed, memory, and storage capacity. Please do not include your Serial Number, IMEI, MEID, or other personal information.
    Provide the version numbers of your operating system and relevant applications, for example "iOS 6.0.3" or "iPhoto 9.1.2".
    Describe the problem, and include any details about what seems to cause it.
    List any troubleshooting steps you've already tried, or temporary fixes you've discovered.
    CCC

  • AQM desktop recording not happening

    Hi
    We have configured desktop recording using AQM but that recording is not even generatiang in the Local Client Machine .
    In the common file section.
    from the SQM service log i am getting the attcahed error.
    However i have hardphone and Softphone attcahed to the same machine where we have installed CAD .
    I ahve configured my windows login in the AQM server same as my PVC login where CAD is installed, but the password is different  as i came to know from cisco that ony usernbame matter but not the password.
    Also checked by same password but issue is same.
    Attcahed is the SQM sercvice loggs.
    Any support is appreciated.
    2012-05-22 09:26:41:195 INFO QM0000 Beginning telephone discovery task.  This may take a minute or two.
    2012-05-22 09:26:41:258 ERROR QMVR2001 Unable to retrieve list of adapters with error: 0
    2012-05-22 09:26:41:258 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-22 09:27:41:271 ERROR QMVR2001 Unable to retrieve list of adapters with error: 0
    2012-05-22 09:27:41:271 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-22 09:28:26:402 INFO SPUD0000 Successfully launched update from <C:\Program Files\Common Files\QM\bin\update.exe>.
    2012-05-22 09:28:34:186 INFO SPUD0000 Returned from update.
    2012-05-22 09:28:41:315 ERROR QMVR2000 Unable to find connected phone. No CCM IP addresses are available.
    2012-05-22 09:28:41:315 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-22 09:29:04:941 INFO QM0000 ASIAPAC\RChakraborty is not configured.
    2012-05-22 09:29:05:643 INFO QM0000 ASIAPAC\RChakraborty is not configured.
    2012-05-22 09:29:06:298 INFO QM0000 ASIAPAC\RChakraborty is not configured.
    2012-05-22 09:29:43:340 INFO QM0000 ASIAPAC\RChakraborty is not configured.
    2012-05-22 09:36:43:235 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-22 09:37:45:615 INFO QM0000 ASIAPAC\RChakraborty is not configured.
    2012-05-22 09:44:46:196 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-22 09:45:50:157 INFO QM0000 ASIAPAC\RChakraborty is not configured.
    2012-05-22 09:52:50:161 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-22 09:53:53:295 INFO QM0000 ASIAPAC\RChakraborty is not configured.
    2012-05-22 09:59:57:160 INFO QM0000 Found MAC: '0021CC65A57C', CCM IP: '20.250.146.20'.
    2012-05-22 09:59:59:781 INFO STD0004 Client <Primary_CTI> connected to service at <20.250.185.66>.
    2012-05-22 10:00:00:744 INFO CTI0000 A status request failed with error 'PlatformException in init: com.cisco.jtapi.PlatformExceptionImpl: Unable to create provider -- user is not authorized, please check CM administration.'.  Retries will occur automatically.
    2012-05-22 10:00:16:145 INFO CTI0000 A status request failed with error 'PlatformException in init: com.cisco.jtapi.PlatformExceptionImpl: Unable to create provider -- user is not authorized, please check CM administration.'.  Retries will occur automatically.
    2012-05-22 10:00:29:784 INFO QM0000 Initial audit did not complete successfully.
    2012-05-22 10:00:29:784 INFO STD0005 Client <Primary_CTI> disconnected from service at <20.250.185.66>.
    2012-05-22 16:58:28:997 ERROR SQMUPLOAD1005 ERROR: (15:failed to read from socket)
    2012-05-22 20:32:59:600 ERROR SQMUPLOAD1005 ERROR: (15:failed to read from socket)
    2012-05-22 22:17:43:353 INFO QM0000 Beginning telephone discovery task.  This may take a minute or two.
    2012-05-22 22:17:43:368 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-22 22:18:43:662 ERROR QMVR2001 Unable to retrieve list of adapters with error: 0
    2012-05-22 22:18:43:662 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-22 22:19:43:676 ERROR QMVR2001 Unable to retrieve list of adapters with error: 0
    2012-05-22 22:19:43:676 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-22 22:20:43:689 ERROR QMVR2001 Unable to retrieve list of adapters with error: 0
    2012-05-22 22:20:43:689 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-22 22:21:43:702 ERROR QMVR2001 Unable to retrieve list of adapters with error: 0
    2012-05-22 22:21:43:702 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-22 22:22:43:716 ERROR QMVR2001 Unable to retrieve list of adapters with error: 0
    2012-05-22 22:22:43:716 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    VERSION INFO: Environment: Platform <Windows 7 (Business/Professional/Ultimate) >.
    VERSION INFO: Environment: Working Dir: <C:\Windows\system32>.
    VERSION INFO: Environment: User Dir: <C:\Wind
    012-05-23 13:10:04:435 INFO QM0000 Beginning telephone discovery task.  This may take a minute or two.
    2012-05-23 13:12:17:725 INFO QM0000 Found MAC: '0021CC65A57C', CCM IP: '20.250.146.20'.
    2012-05-23 13:55:59:319 ERROR SQMUPLOAD1005 ERROR: (15:failed to read from socket)
    2012-05-23 14:03:06:821 INFO QM0000 Beginning telephone discovery task.  This may take a minute or two.
    2012-05-23 14:03:06:857 ERROR QMVR2000 Unable to find connected phone. No CCM IP addresses are available.
    2012-05-23 14:03:06:857 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-23 14:03:26:644 ERROR SQMUPLOAD1005 ERROR: (15:failed to read from socket)
    2012-05-23 14:04:06:878 ERROR QMVR2001 Unable to retrieve list of adapters with error: 0
    2012-05-23 14:04:06:878 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-23 14:05:06:901 ERROR QMVR2001 Unable to retrieve list of adapters with error: 0
    2012-05-23 14:05:06:902 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-23 14:06:06:925 ERROR QMVR2001 Unable to retrieve list of adapters with error: 0
    2012-05-23 14:06:06:925 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-23 14:07:06:948 ERROR QMVR2001 Unable to retrieve list of adapters with error: 0
    2012-05-22 09:26:41:195 INFO QM0000 Beginning telephone discovery task.  This may take a minute or two.
    2012-05-22 09:26:41:258 ERROR QMVR2001 Unable to retrieve list of adapters with error: 0
    2012-05-22 09:26:41:258 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-22 09:27:41:271 ERROR QMVR2001 Unable to retrieve list of adapters with error: 0
    2012-05-22 09:27:41:271 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-22 09:28:26:402 INFO SPUD0000 Successfully launched update from <C:\Program Files\Common Files\QM\bin\update.exe>.
    2012-05-22 09:28:34:186 INFO SPUD0000 Returned from update.
    2012-05-22 09:28:41:315 ERROR QMVR2000 Unable to find connected phone. No CCM IP addresses are available.
    2012-05-22 09:28:41:315 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-22 09:29:04:941 INFO QM0000 ASIAPAC\RChakraborty is not configured.
    2012-05-22 09:29:05:643 INFO QM0000 ASIAPAC\RChakraborty is not configured.
    2012-05-22 09:29:06:298 INFO QM0000 ASIAPAC\RChakraborty is not configured.
    2012-05-22 09:29:43:340 INFO QM0000 ASIAPAC\RChakraborty is not configured.
    2012-05-22 09:36:43:235 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-22 09:37:45:615 INFO QM0000 ASIAPAC\RChakraborty is not configured.
    2012-05-22 09:44:46:196 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-22 09:45:50:157 INFO QM0000 ASIAPAC\RChakraborty is not configured.
    2012-05-22 09:52:50:161 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-22 09:53:53:295 INFO QM0000 ASIAPAC\RChakraborty is not configured.
    2012-05-22 09:59:57:160 INFO QM0000 Found MAC: '0021CC65A57C', CCM IP: '20.250.146.20'.
    2012-05-22 09:59:59:781 INFO STD0004 Client <Primary_CTI> connected to service at <20.250.185.66>.
    2012-05-22 10:00:00:744 INFO CTI0000 A status request failed with error 'PlatformException in init: com.cisco.jtapi.PlatformExceptionImpl: Unable to create provider -- user is not authorized, please check CM administration.'.  Retries will occur automatically.
    2012-05-22 10:00:16:145 INFO CTI0000 A status request failed with error 'PlatformException in init: com.cisco.jtapi.PlatformExceptionImpl: Unable to create provider -- user is not authorized, please check CM administration.'.  Retries will occur automatically.
    2012-05-22 10:00:29:784 INFO QM0000 Initial audit did not complete successfully.
    2012-05-22 10:00:29:784 INFO STD0005 Client <Primary_CTI> disconnected from service at <20.250.185.66>.
    2012-05-22 16:58:28:997 ERROR SQMUPLOAD1005 ERROR: (15:failed to read from socket)
    2012-05-22 20:32:59:600 ERROR SQMUPLOAD1005 ERROR: (15:failed to read from socket)
    2012-05-22 22:17:43:353 INFO QM0000 Beginning telephone discovery task.  This may take a minute or two.
    2012-05-22 22:17:43:368 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-22 22:18:43:662 ERROR QMVR2001 Unable to retrieve list of adapters with error: 0
    2012-05-22 22:18:43:662 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-22 22:19:43:676 ERROR QMVR2001 Unable to retrieve list of adapters with error: 0
    2012-05-22 22:19:43:676 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-22 22:20:43:689 ERROR QMVR2001 Unable to retrieve list of adapters with error: 0
    2012-05-22 22:20:43:689 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-22 22:21:43:702 ERROR QMVR2001 Unable to retrieve list of adapters with error: 0
    2012-05-22 22:21:43:702 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-22 22:22:43:716 ERROR QMVR2001 Unable to retrieve list of adapters with error: 0
    2012-05-22 22:22:43:716 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    VERSION INFO: Environment: Platform <Windows 7 (Business/Professional/Ultimate) >.
    VERSION INFO: Environment: Working Dir: <C:\Windows\system32>.
    VERSION INFO: Environment: User Dir: <C:\Wind
    012-05-23 13:10:04:435 INFO QM0000 Beginning telephone discovery task.  This may take a minute or two.
    2012-05-23 13:12:17:725 INFO QM0000 Found MAC: '0021CC65A57C', CCM IP: '20.250.146.20'.
    2012-05-23 13:55:59:319 ERROR SQMUPLOAD1005 ERROR: (15:failed to read from socket)
    2012-05-23 14:03:06:821 INFO QM0000 Beginning telephone discovery task.  This may take a minute or two.
    2012-05-23 14:03:06:857 ERROR QMVR2000 Unable to find connected phone. No CCM IP addresses are available.
    2012-05-23 14:03:06:857 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-23 14:03:26:644 ERROR SQMUPLOAD1005 ERROR: (15:failed to read from socket)
    2012-05-23 14:04:06:878 ERROR QMVR2001 Unable to retrieve list of adapters with error: 0
    2012-05-23 14:04:06:878 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-23 14:05:06:901 ERROR QMVR2001 Unable to retrieve list of adapters with error: 0
    2012-05-23 14:05:06:902 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-23 14:06:06:925 ERROR QMVR2001 Unable to retrieve list of adapters with error: 0
    2012-05-23 14:06:06:925 INFO QM0004 Unable to retrieve phone information for desktop recording, retry in 60 seconds.
    2012-05-23 14:07:06:948 ERROR QMVR2001 Unable to retrieve list of adapters with error: 0
    Any support is appreciated
    regards
    RC

    Hi
    I have checked and as of now what i can see that the phone is connected and added in the rmcm user that we used as jtapi in AQM .
    However further troubleshooting we found that while in call , in the agent PC it is generating a RAW file , but it is not generating any.spx file.
    we have given compaince license to user .
    we also checked by giving advance license for dektop recording but the outcome is same , it is not generating any .erec file as well.
    and cannot find nay file in server as well.
    I attcahing a logs i think may be relevant to find the issue frp the client desktop .
    The mAc id of the phone end with "BACE"
    your help is appreciated.

  • Kswapd0 almost constant high CPU usage

    Hello,
    On my Eagle M2, I see kswapd0 using almost constant 50% CPU usage with the latest AOSP.
    Can this be related to the big battery drain I'm having? An older AOSP build (end of march with another 3.10 kernel branch) does not have this kswapd0 issue and has a far better battery life.
    PID PR CPU% S #THR VSS RSS PCY UID Name
    79 1 50% R 1 0K 0K fg root kswapd0
    This post reports similar issues but is of an older kernel (so probably not related): http://forum.xda-developers.com/general/rooting-roms/fix-kswapd0-cpu-usage-problem-t2845239 Is there a parameter somewhere not set right?I even tried compiling a kernel with CONFIG_SWAP=n but kswapd0 is still there :-(
    br

    Hello, it seems reverting https://github.com/sonyxperiadev/device-sony-eagle/commit/07b30b728766c248c1d5555417d5e92271781f88 "solves" the kswapd high CPU usage! (I removed "BOARD_KERNEL_CMDLINE += mem=883M" from BoardConfig.mk) The battery life seems better now, but still not as good when comparing with the march build. best regards

  • FMLE CPU almost 100%?

    Hi everyone, Please I need help. I use flash media live encoder to livestream at our church and I get almost 100% CPU usage. I dont have any other programs running just flash media live encoder and as soon as i press to start streaming, CPU usages jumps all the way up.  
    Below is my equipment I use
    AMD Athlon II X4 640 Quad Core 3.0GHz CPU
    MSI 970A-G46 AM3+ AMD 970 + SB950 Motherboard
    G.SKILL Ripjaws Series 8GB 240-Pin DDR3 SDRAM DDR3 1600 RAM
    EVGA 02G-P4-3658-KR GeFrce GTX 650 Ti 2GB 192-bit GDDR5 Video Card
    Windows 7 Ultimate x64 OS
    So I have 3 cameras I use and those cameras go into my ATEM TVS via HDMI or SDI. from ATEM TVS it goes to a PCI capture card. I've tried using
    Blackmagic Design Intensity Pro
    AVERMEDIA Game Broadcaster HD
    AVerMedia Game Recorder -C985
    All Three of these capture cards (same result)
    I want to be able to stream HD quality 720-1080p at least that is what my streaming provider is telling me I should be able to do.  so my settings are as follows. input is 1920 by 1080. output is 1280 by 720. Pretty reasonable. No matter what card I choose my settings are for H265 30fps I've tried all types of frames. and tried all times of bit rates. from 150 to 2000 kbps.  always running at very high CPU. Please help me out. Thanks all

    I Remember, that was a problem with 100% CPU for 10.1, 10.2 database by LISTENER
    Need to rename $ORACLE_HOME/opmn/ons.conf to something else.
    and restart listener.
    It's may be useful if you installed OEM with database on the same server. Or problem can be anywhere else.

Maybe you are looking for