QuickTime doesn't support mpeg4

My quicktime player tells me that it doesn't support mpeg4 when I try to play an mpeg4 on my home xp system. What should I do.

Are you sure the video is industry-standard MPEG-4? Some formats, including Microsoft's, use the .mp4 extension even though the codec is an offshoot of the standard and so not compatible. From where did the video come?

Similar Messages

HT3775 I am downloading a Final Cut Pro x project directly to Quicktime. The movie will not play, stating Quicktime doesn't support the codec. I currently am using Quicktime 10.1 on my Mac OS X Lion

I am downloading a Final Cut Pro x project directly to Quicktime. The movie will not play stating Quicktime doesn't support the codec. I currently am using Quicktime 10.1 on my Mac OS X Lion

Wow. Okay...
I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
My only comment would be re: your computer specs:
BJReis wrote:
. This may be due to somewhat older equipment:
GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
4GB is right on the edge, IMHO. 16G is ideal.
I wish you luck, hang in there, and standby for more help.

Trying to export as a JPEG 2000 but very jumpy when I view it in quicktime. Is this just because the player doesn't support JPEG2000?

Trying to export as a JPEG 2000 but very jumpy when I view it in quicktime. Is this just because the player doesn't support JPEG2000?

JPEG2000 for a digital projector? The option you see in Compressor, or the QT export is NOT the format they need. You can only make that with special software. I had that asked of me to deliver, I tried using Compressor and the JPEG2000 codec...and it wasn't right. Ended up sending it out of house.
FYI

Bought a movie via iTunes, tried playing it and was told that it "requires Quicktime, which this version doesn't support"

Bought a movie via iTunes, tried playing it and was told that it "requires Quicktime, which this version doesn't support". Any suggestions? Also why does iTunes sell a movie which you then cant watch!!!

Try restarting your iTunes in 32-bit mode, as per the following document:
iTunes 10.4 for Mac: Older media files may require iTunes to reopen in 32-bit mode

Does quicktime pro support mpeg4

I have a video clip from a Hitachi camera that I want to edit in either Final Cut or imovie. The video is in mpeg-4 format which both do not recognize. Will buying quicktime pro help my computer to recognize it?

If the free version of QuickTime doesn't read a file format, QuickTime Pro won't either. If you only want to convert a file from one format to another, use the free MPEG Streamclip.
(60467)

Quicktime doesn't open AVI file with Perian installed

I have installed Perian but Quicktime X doesn't open AVI files for a week. I have repaired permissions. But Quicktime only plays the AVI file if I reboot the Mac. VLC always plays the file. The AVI codec is XVID. Quicktime doesn't play other formats such as FLV. I have deleted .plist files, com.apple.QuickTimePlayerX.plist. I have found other files(com.apple.QuickTimePlayerX.plist.0GH3f31, com.apple.QuickTimePlayerX.plist.0h9MBzV...) that I deleted also. Any idea? Thanks

And now ... surprisingly I view AVI files in Quicktime without Perian.
QT has very limited AVI support (file type and a few older codecs) built in. Most common codecs use by Windows users, however, require the additional support provided by Perian. If the AVI files are now playing in QT without Perian, then simply check the Inspector, Properties, or Info window to see which codecs are in your AVI file and you should be able to tell if they are among those supported "natively" by QT. Also note that this regaining of the ability to play your files may indicate a component conflict of some sort may have existed previously.

Quicktime doesn't run - Illegal Plugin Error

I recently purchased this computer, and used "PC Mover" to move my settings from an older PC to this one. I think I have conflicting versions of QuickTime, because I can't uninstall it - I'm getting a "Fatal Error during Installation" error when I try to uninstall. When I try to re-install, Quicktime doesn't work at all.
I'm just trying to get to a point where I can view mpg's from a website. Whenever I try to do this, I get a "Quicktime plugin error 7.1.3" - Plugin performed an illegal operation. You are strongly advised to restart Navigator" (Even though I use Mozilla Firefox, I get similar errors in IE, so I don't think it's a browser issue).
Any help I could get on this would be greatly appreciated.
Thanx,
Tony_Van

I was able to get help from the Apple support people.

N900 Media player & KMPlayer doesn't support AVI V...

Hi everybody, my N900 media player & KMPlayer wasn't able to play AVI video files recorded on my Samsung DC, unfortunately I don't know what is the codec of the AVI file as there are so many different one.
Where to download a video player that supports most AVI CODEC? Another question is my N900 doesn't support all MPEG4 files either, please advise me on these matters, regards.

intsall mplayer from teh devels, and set it as a main player for kmplayer, than try .
Reality is wrong....dreams are for real... 2pac .
don't forget to hit that green kudos

Error in allInOne.js: Object doesn't support this property or method

We are having an issue deploy our website (Developed in .Net) on a specific server. When we try to visualize a report on any browser we get this error:
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.21022; .NET CLR 3.5.30729; .NET CLR 3.0.30618; OfficeLiveConnector.1.4; OfficeLivePatch.0.0)
Timestamp: Wed, 7 Apr 2010 17:52:31 UTC
Message: Object doesn't support this property or method
Line: 10
Char: 281690
Code: 0
URI: http://{IP ADDRESS}/WebUserInterface/aspnet_client/system_web/2_0_50727/crystalreportviewers12/allInOne.js
We have install the Crystal reports 2008 runtime and the Crystal report 2008 sp2.5 runtime. Both of them give me the same results.
It's killing me because i have installed the same solution on many other server without any issue.
Ben
P.s. The Web server is a Window Server 2003 R2 standard edition

Perhaps using [modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] will at least tell us what dlls are loading. Look at the CR dlls. There should not be any v11 files loaded by your app.
You may also start considering obtaining phone support for this one. I have a feeling this will take more than just forums to solve...
Phone support can be obtained here:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
Ludek

Iwlist scanning gives: Interface doesn't support sc [solved]

When I'm trying to scan for all available networks I get:
# iwlist eth1 scanning
eth1 Interface doesn't support scanning : Operation not supported
My wireless card works fine if I set every parameter manually. I'm currently using the orinoco drivers that came along with ArchLinux.
It seems like that the version of the orinoco drivers installed doesn't support the scan stuff. But building the new orinoco drivers failed with
/usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c: In function `orinoco_ pci_suspend':
/usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c:330: error: too many a rguments to function `pci_save_state'
/usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c: In function `orinoco_ pci_resume':
/usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.c:347: error: too many a rguments to function `pci_restore_state'
make[2]: *** [/usr/local/download/orinoco/orinoco-0.15rc2/orinoco_pci.o] Error 1
make[1]: *** [_module_/usr/local/download/orinoco/orinoco-0.15rc2] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.11.3-ARCH'
make: *** [modules] Error 2
So I did try the wlan-ng26 driver downloaded and installed with pacman.
I remove the orinoco modules with
[root@ArchThinkpad orjanp]# modprobe -r orinoco_pci
But when I try to insert the prism2_pci module, it doesn't exist. Why?
[root@ArchThinkpad orjanp]# modprobe prism2_pci
FATAL: Module prism2_pci not found.
Any heads up on what to do?
This is iwconfig before removing the orinoco modules.
[root@ArchThinkpad orjanp]# iwconfig
lo no wireless extensions.
sit0 no wireless extensions.
eth0 no wireless extensions.
eth1 IEEE 802.11-DS ESSID:"" Nickname:"Prism I"
Mode:Managed Access Point: 00:00:00:00:00:00 Bit Rate:11 Mb/s
Tx-Power=15 dBm Sensitivity:1/3
Retry min limit:8 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=0/92 Signal level=-68 dBm Noise level=-122 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
This is lspci
[root@ArchThinkpad orjanp]# lspci
00:00.0 Host bridge: Intel Corp. 82845 845 (Brookdale) Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corp. 82845 845 (Brookdale) Chipset AGP Bridge (rev 04)
00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02)
00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02)
00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corp. 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corp. 82801CAM IDE U100 (rev 02)
00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus (rev 02)
00:1f.5 Multimedia audio controller: Intel Corp. 82801CA/CAM AC'97 Audio (rev 02)
00:1f.6 Modem: Intel Corp. 82801CA/CAM AC'97 Modem (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
02:00.0 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01)
02:00.1 CardBus bridge: Texas Instruments PCI1250 PC card Cardbus Controller (rev 01)
02:02.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset (rev 01)
02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42)
This is lsmod before removing orinoco.
[root@ArchThinkpad orjanp]# lsmod
Module Size Used by
radeon 78336 1
ohci_hcd 23048 0
ehci_hcd 36488 0
irtty_sir 7552 0
sir_dev 18636 1 irtty_sir
irda 144184 1 sir_dev
crc_ccitt 2432 1 irda
parport_pc 29252 0
parport 38600 1 parport_pc
rtc 13260 0
pcspkr 4044 0
eepro100 32528 0
orinoco_pci 7552 0
orinoco 44172 1 orinoco_pci
hermes 9472 2 orinoco_pci,orinoco
yenta_socket 23560 0
rsrc_nonstatic 11648 1 yenta_socket
pcmcia_core 51488 2 yenta_socket,rsrc_nonstatic
snd_intel8x0m 19396 0
snd_intel8x0 34624 0
snd_ac97_codec 79224 2 snd_intel8x0m,snd_intel8x0
snd_pcm_oss 56224 0
snd_mixer_oss 21120 1 snd_pcm_oss
snd_pcm 98564 4 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 27268 1 snd_pcm
snd 59492 7 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 10848 1 snd
snd_page_alloc 10244 3 snd_intel8x0m,snd_intel8x0,snd_pcm
i2c_i801 8972 0
i2c_core 23296 1 i2c_i801
usbhid 47744 0
uhci_hcd 33424 0
usbcore 125560 5 ohci_hcd,ehci_hcd,usbhid,uhci_hcd
shpchp 100996 0
pci_hotplug 34760 1 shpchp
tsdev 8256 0
joydev 10560 0
evdev 9984 0
cpufreq_powersave 2176 0
cpufreq_userspace 5680 0
p4_clockmod 6164 0
speedstep_lib 4868 1 p4_clockmod
freq_table 5008 1 p4_clockmod
e100 37760 0
mii 5760 2 eepro100,e100
nls_cp437 6144 1
vfat 14976 1
fat 41884 1 vfat

orjanp wrote:
Thanks.
I installed the 0.15RC1 version of the Orinoco drivers found here.
I rebooted but I still had the 0.13 version. I did a make and make install as the readme file said.
What do I have to do to update the driver?
do you use a PKGBUILD?
update the driver: if it was copied to the right place and the kernel knows about it (depmod -a) it should work
for a start, check under
ls -la /lib/modules/`uname -r`/kernel/drivers/net/wireless/
that your module is installed under the correct location (the orinoco files should be newer than the other ones)
if this is so, make sure you are depmod -a (as root) ... and if even this is ok, then either you are running the new modules or something strange happened

HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>

It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

3000 J115 7387 - Current BIOS 2NKT31A doesn't support 4gb RAM

I have a Lenovo 3000 Desktop J115 7387-26u and the current BIOS, just downloaded and tested from Lenovo's "support" site, doesn't support 4gb of RAM properly. I have dual 2gb DIMMs, for a total of 4gb, and both Lenovo's PC-Doctor diagnostics and another memory scanner report to me that I have 4gb. See this screen print showing PC-Doctor's RAM report compared to what Windows "sees".
When I boot the system, the BIOS only reports 3006mb RAM is present. Clearly it's recognizing both DIMMs. I've swapped the DIMMs and the results are the same.
Lenovo, PLEASE RELEASE A BIOS that properly supports what the system claims to support!
Message Edited by GeoApps on 04-06-2009 03:00 PM

dhaj1964 wrote:
just to let you know....32 bits systems....can only read 3gigs of memory....64 bits system can read more .....
Two things. First, "just so you know", the Lenovo 3000 J115 7987 is an Athlon 64 X2 (which you would know if you checked the system specs),and second, I'm talking about the BIOS failing to recognize the RAM that the system specs claim it should be recognizing. This is regardless of OS.

How do I get my music from iTunes Match to my older ipod that doesn't support iTunes Match

I have an old ipod ios 4.2 that doesn't support iTunes Match how do i get my music from the cloud to my computer library in order for me to put the music onto my older ipod for the car

Setup iTunes Match on your computer. Download the songs to your iTunes libary and then sync to your old iPod.
http://www.apple.com/itunes/itunes-match/

How can I watch a Disney movie from the Disney website I have purchased movie cd and I can go to the website on by gateway computer but can't get it to play on my iPad it wants me to download flash but apple doesn't support flash or I can down loadQuickTi

How can I watch a Disney movie from the Disney website I have purchased movie cd and I can go to the website on by gateway computer but can't get it to play on my iPad it wants me to download flash but apple doesn't support flash or I can down loadQuickTime but don't know how. Says to email website did that but takes me back to same place to email help

Contact iTunes Customer Support, but honestly, there are no returns for iTunes purchases.

I have a model 1,1 Mac Book in the black case. How can I transfer about 30 GB of stuff to a MacBook Pro running Yosemite? Can't do a Thunderbolt transfer. The Seagate backup drive I bought doesn't support 10.5.8. Thank you.

How do I transfer 30 GB of stuff, mostly text documents, bookmarks and a few hundred photos from a MacBook model 1,1 in the black case, purchased in (2007?) running Leopard 10.5.8 with a 667 bus, 2 GB, 256 GB to a MBP 13" Retina running Yosemite 10.10.1? Using Migrate is out. Discovered after I bought it that the Seagate Plus Backup for Mac does not work with 10.5.8. OnetoOne recommends backing up my data before I do that, which seems like a good idea. Have a 801.11 n Time Capsule that also isn't working so that is not presently an option. Thank you.

The Seagate backup drive I bought doesn't support 10.5.8
The only reason I can see for that is it's formatted NTFS, which would likely be Read Only in 10.5.x, if you can reformat it MacOS extended, which would erase everything on it now, then that should work for your purposes.

QuickTime doesn't support mpeg4

Similar Messages

Maybe you are looking for