Quicktime - double image when projecting to screen

Hello, I am trying to project a Quicktime video to a pull-down screen. I select "full screen" from the QT View menu, and am sending to the 2nd monitor output, but I get two images rather than one big image on the screen.
What do I need to do to fix this?
The screen is about 75 inches x 45 inches.
Thank you!

I have tried fit to screen, fill screen, etc - I still get the 2 smallish images, and the left one is cut off a bit.

Similar Messages

Double Images when copied to CD

I have an album of photos which I copied to CD in the following manner. I made a folder on my desktop and dragged (I may have exported them from iPhoto instead of dragging but at the moment I am not sure which I used) 68 photos to the folder. I then copied the folder to a CD and then burnt it. When I try to show it on a DVD player which plays CD jpeg images, it shows 119 photos. When it lists the jpeg's I find that about 49 of them are doubled up, ie: img1867, 1mg1868, etc and there is a total of 119 jpegs show up. When the CD is played, a blank screen appears on the double image, which stays on screen for quite some time, therefore ruining the effect of the images.
The strange thing is, that when I put that disc into my eMac, it only shows 68 images in the folder. Any information would be appreciated. Thanks.
PS One thing that I wonder about is that my digital camera had a numbering system that went up to 9,999. I have since gone over that mark, therefore I do have images that are starting to duplicate the original numbers in my iPhoto library. Also, my camera seems to be reverting to zero at times when I download a new set and I therefore have image numbers that are doubling and tripling up. I have my iPhoto library arranged by date, so I presume that is keeping the photos sorted properly even though there are similar image numbers.

I have made another CD following your directions, ie: Make folder on desktop, drag photos from album into folder. I then dragged the images from the folder onto the CD and proceeded to burn it. When I tried playing it on my DVD player through a TV, it again doubled many of the images. (There should have been 68 images from the folder, but the readout on the TV (from the DVD player) indicates 119). I tried a CD that a Windows friend had burned with jpeg images on it and it performed flawlessly. One thing I did notice, was that the title of the Windows CD came up on screen, ie: 'Rockies 2005' along with the listing of the jpeg images, when the Stop button was pressed on the remote. Howevever in mine, the word (Root) in brackets appeared in lieu of a name. Would this be indicative of something? An error also comes up on screen 'Corrupt File'. So, the same problem exists. I hope there may still be Hope?! Thanks Peter and Bri. Cheers.

How to deal with images when detecting/resizing screen?

Hi there,
I am trying to learn how to detect screen resolution and
resize a flash movie to those dimensions. The one thing I'm
wondering first is, how to deal with images in the movie.
Do I need a variety of different movie sizes that I serve up
depending on the resolution, or is there some way of linking to
higher rez image that can be scaled down to fit the screen?
Thanks!

as far as I know this has always been a bit of an issue when
using
images inside a scaled movie. If you display a high res image
inside a
scaled down movie, flash can't "reoptimize" it so the image
looks
jagged. Of course the other way around is even worse..
Serving images based on the screen res could be possible if
you detect
it using javascript but could be a night mare to maintain and
test it...
I guess the questions I would ask myselkf are:
1. what is my audience? What resolution the majority of them
will have?
2. Is there anyway I can keep the image size fixed, and scale
to fit he
rest of the design?
3. How much time do I have to implement the customized
version?
It really depends on your project..but to answer to your
quuestion yes
you can detect.
http://www.pageresource.com/jscript/jscreen.htm
and your flash will have to interpret and load images from
different
directories based on the var passed

Double image when exporting versions

Hi, I exported a version of a RAW file to PS CS2 for editing with no problems but subsequently all other versions I exported from Aperture will have a double image of the initial file sandwiched together regardless whether I open it with Preview or PS. However, there are no such problem if I drag the thumbnail from Aperture to Desktop before opening it.
What have I done wrong???

Hi Firstlaunch,
what I did was wrong. I should have used "Open with external editor" instead of "Export Versions", which is low res jpegs in my preference setting. Anyway, I then open these jpegs with PS CS2 and got on with my editing. The edited pics are then re-imported to Aperture and that's where the problem began. All exported jpegs from then on will have a double-image/multi exposure of the first pic I exported.
I can't show you screen shot cos I've since trashed all the file on Aperture and re-installed everything. I still don't know what caused the problem but I'm doing it the right way now and everything's fine. Thanks.

Double image when printing labels

I am copying in a graphic for Avery round labels. Everything looks fine on the screen, but when printed, some (not all) of the labels have the image, plus a smaller version of the image on top of it. Kind of like an inset. I have reloaded the printer software (I have an HP Photosmart c8180 All in one), used old avery forms, downloaded new avery forms, and a host of meaninless other things. Any suggestions would be most welcome.

Hi, have you tried using another program to print the image?
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

When I import selected photos from iPhoto I am getting double images in Aperture...why???

Does anyone know why I am getting double images when I import from iPhoto to Aperture?

I found this under Aperture help:
Sometimes you get two copies of an image imported from iPhoto, and the pair is stacked. Though this might surprise you, the reason is very simple. Whenever you edit in iPhoto, it preserves the original and makes the changes to a copy. When you import to Aperture, you get both the original and the copy from iPhoto.
If you want the originals only, here's a quick way to remove the copies by using the "iPhoto-edited" keyword:
Click any image in the project to select it.
Choose Edit > Select All.
Choose Stacks > Unstack.
In the browser's search box (to the right of the magnifying glass), type: iPhoto-edited
This will cause only iPhoto-edited images to appear in the Browser. Now you can relocate or delete them as you please.
Note: If you have manually edited the contents of the iPhoto Library or have used any third-party software that sub-manages or attempts to minimize the size of the iPhoto Library (by deleting originals, for example) then you need to exercise caution. Rather than delete the files immediately, consider temporarily storing them in another project until you're sure you have everything you want to keep in the main project.
Good luck.

HVX-200 import blurry (double-images) into CS4?!

I am using Premiere CS4 and I imported footage from Panasonic HVX-200 shot at 720PN 24p format.
I am importing using the 720P 24P DVCPROHD preset.
For some reason all my footage comes out blurry (I see double images when a subject moves, as if I have frames blending together)
Can someone tell me what may be causing this?
Thanks,
Aza

No red line, I did render the clips... After checking just now, I only see it in the program monitor, the source monitor appears fine.
Here are the sequence settings I used (copied and pasted directly from the settings window)...
General
Editing mode: P2 720p 60Hz DVCPROHD
Timebase: 23.976fps
Video Settings
Frame size: 960h 720v (1.3333)
Frame rate: 23.976 frames/second
Pixel Aspect Ratio: HD Anamorphic 1080 (1.333)
Fields: No Fields (Progressive Scan)
Audio Settings
Sample rate: 48000 samples/second
Default Sequence
Total video tracks: 3
Master track type: Stereo
Mono tracks: 4

Is there a way to make the quality of quicktime player better. when I take a screen movie of a demonstration video the quality when exporting to final cut is poor???

is there a way usinig quick time player when recording a screen movie of product demonstration better quiality?

FCE works in standardized broadcast frame sizes and frame rates. If your screen recording is not exactly the same pixel dimensions and frame rate as the sequence you are editing in, FCE will try to force it to fit, and that forcing may distort and reduce the apparent quality of your recording.
Have you tried to render your clips on the sequence?
Most people that are creating tutorials, etc. use dedicated software. If you have to do this a lot, then you might want to consider software such as ScreenFlow, which consolidates screen recording, editing/manipulating of the screen recording, and re-compression of your project for delivery in one application.
http://www.telestream.net/screenflow/overview.htm
MtD

Broken/missing images when copying from one project to another.

Greetings:
I've been building pages in RH project #1 by copying and
pasting text and images from a separate RH project #2. While
working in RH #1 all the images are there. When I publish, half of
them are not.
Doesn't RH automatically add copied and pasted files to the
project into which they are pasted?
If not, how do I get these images into the project so they
get published? It tried pasting them all into the FlashHelp folder,
where the other published files are, but this has had no effect.
More, I have to use this technique again and again (long
story ;-) so I really need to get this solved.
Thanks.
stevenjs

Just to get some clarification--you're saying that the
problem appears when you are generating your output from project
#2? Or just when you publish after generating from project #2?
My guess would be that you're copying the code for the image
but not the image itself. Try this:
1. Copy the entire folder of images from project #1 into the
project #2 directory.
2. Do your copying and pasting from project #1 into #2 like
you've been doing.
3. Generate from project #2 and see if the images show up in
the output.
I know you say you have reasons for copying and pasting, but
I just want to mention the possibility of importing topics instead,
which will copy everything over into project #2. But you've
probably already thought about that.
--Ben

I need to download an online quicktime video for a project. Its is 3gb so takes a while to buffer but when it buffers to about half way it stops and I have to reload the page and try again?

I need to download an online quicktime video for a project. Its is 3gb so takes a while to buffer but when it buffers to about half way it stops and I have to reload the page and try again?

Let's first try updating using an installer file downloaded from the Apple Website:
http://www.apple.com/itunes/download/

HT5213 I am about to publish my iBook with photographs. It is interactive in that small images will go full screen when touched. Is there a size limit on my book? If so how many megs?

I am about to publish my iBook with many photographs. It is interactive in that small images will go full screen when touched. Is there a size limit on my book? If so how many megs?

2Gb is the max

Can I view a QuickTime movie on my ipad2? When I click on link that should launch a QuickTime movie I get a blank screen.

Can I view a QuickTime movie on my ipad2? When I click on link that should launch a QuickTime movie I get a blank screen. Is there something I should download to make this work?

Install OPlayer HD and enable the QuickTime plugin to play your movies.

How can I stop my iMac crashing when I try to play a project full screen?

When I click on the icon to play a project full screen, I get the dreaded rotating circle thing, then it kicks me out (saying "imovie quit unexpectedly"), and asking if I want to "ignore, report or relaunch". For the first dozen times, I reported the problem but I've now stopped trying to use the function. Any suggestions for how to fix the problem will be gratefully received. NB I've also posted another question about pip and wonder if the 2 problems are connected.

If you don't get an answer here, you may want to post in the iMovie discussion here.

Image Still Cropped When Viewed Full Screen

Hi everyone. I am trying to figue out if there is any way in iBooks Author to have an image cropped(masked) in layout view, but then enable it to show the full unmasked and uncropeed image when tapped to be viewed full screen on the iPad.
I have a client that wants some image to only take up half a page vertically and have a widescreen type crop with text on the lower half of the page, but would like to see the full image when tapped on instead of the widescreen crop. Thanks in advance for any help you can offer.
Griffin

Are you meaning to put a 100 pt+ line border on the image
Yes. Like this:
(1)
(2) Then do this:
(3)
Which should then result in that image being zoomed too large and just enough so that the original black border is clipped and you are able to see the image in all it's fullness.

Is it possible to set an image to zoom full screen when clicked?

Hi Guys
Quick question...
Is it possible to set an image to zoom full screen when clicked?

You can create a button that displays a larger image:
http://blogs.adobe.com/indesigndocs/2010/12/hot-spot-button-workaround-for-indesign-dig-pu bs.html

Quicktime - double image when projecting to screen

Similar Messages

Maybe you are looking for