QuickTime Editing Basic - Loses Audio when Video is Edited

I only have the basic quicktime version and I only want to do basic editing. When I trim or split a clip, the audio input from the computer mic gets lost. Thoughts? Help?

I only have the basic quicktime version
the basic version ( QT player ) does not edit, you need to buy QuickTime Pro from here:
QuickTime Pro
If you mean QT X read the help files on trimming clips it explains it well

Similar Messages

HT204368 I recently upgraded from an iPhone 4s to an iPhone 5. I have a Motorola HX550 Bluetooth Headset which worked flawlessly with the iPhone 4s. However, since upgrading to the iPhone 5, I frequently lose audio when in the middle of a call. I am no

I recently upgraded from an iPhone 4s to an iPhone 5. I have a Motorola HX550 Bluetooth Headset which worked flawlessly with the iPhone 4s. However, since upgrading to the iPhone 5, I frequently lose audio when in the middle of a call. I am not certain whether it is a full disconnect or just an audio loss. The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another source even if bluetooth disconnected. The loss of audio is always preceded by a quick shrill noise, so I can easily tell when it happens. All I have to do to fix the problem is to select Audio Source on the call screen, temporarily switch audio back to the iPhone, and then switch back to the headset, and then it starts working again.
Is is important to note that I am not the only one experiencing this issue:
This is a link to someone using the Motorola H19txt headset experiencing the same issue
https://forums.motorola.com/posts/94ac15ad7c
If you go to the Plantronics website and look at the "Ratings and Reviews" on the Voyager Legend you will see the same issue reported:
http://www.plantronics.com/us/product/voyager-legend (next paragraph is taken from the review since there is no direct link to the review.
Really nice Headset unless you own an Iphone 5. I own several Plantronics headsets and have always loved the quality/ performance. This headset seems not to be compatible with the new Iphone 5. In the middle of a conversation it will lose all incoming audio. This leaves you trying to switch audio sources really fast in order not to lose your phone call. Ive tried 3 legend headsets and they all do the same thing. Hopefully this gets fixed soon because the headset is really nice
Since this issue appears to affect multiple headsets from multiple vendors, I think it is fair to conclude that it is an issue with the iPhone5 bluetooth itself.
I am posting this as a new discussion as I don't see any other posts specific to this iPhone 5 Bluetooth issue. I would have reported this as a problem to Apple, but don't seem to be able to find a way to do this on the web. Hopefully they are already aware, but if not, maybe they will see i here.

here is an interesting thing: take the iphone and set lock screen to never. Now make an email with siri--be sure to activate her with call button. get to the body and get some text in there. then just stop talking. LOCK SCREEN APPEARS!!!!!! and of course you draft is gone.
There does seem to be a work around for some--maybe all these issues. Don't use the call button--use the buttons on the phone.
Siri seems to behave properly with scenerio above---sans call button. She does not go to lock.

I frequently lose audio when in the middle of a call. I am not certain whether it is a full disconnect or just an audio loss. The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another s

I frequently lose audio when in the middle of a call. I am not certain whether it is a full disconnect or just an audio loss. The person on the other end reports still being able to hear me, however, I suppose they could hear me speaking over another source even if bluetooth disconnected. The loss of audio is always preceded by a quick shrill noise, so I can easily tell when it happens. All I have to do to fix the problem is to select Audio Source on the call screen, temporarily switch audio back to the iPhone, and then switch back to the headset, and then it starts working again.
My Iphone5 was replaced and having same Problem. Only does this when using bluetooth for talking.

I have the exact same issue... I've been using a Jabra Extreme2 and just this weekend, bought a Plantronics Marque2 and today had the same issue, so it's clearly not the headset but the phone or OS.
I might try a restore and see if it helps...

No Audio when Video Message is played back - why?

After I record a Video Message to send, there's no Audio when Video Message is played back - why?
I did a Skype sound check, I checked all the seetings on my iPhone, what am, I missing?
Help, please.

I am also having this problem and cannot resolve it. Anybody got any ideas? I am fully updated in both Skype and iOS. Many thanks.

How do I get audio back on single clip that loses audio when imported into Premiere Pro CC?

I've got one clip out of many that for some reason won't play any audio when imported into Premiere Pro. I am new to Premiere Pro so am hoping it's something stupid I've done, but this is a problem with just a single clip exported the same way as all my others, the original audio is loud (not quiet) and none of the FAQ issues seem to apply (ie I haven't muted the audio or anything stupid like that)
The clip was exported from Plural Eyes into a "master" Premiere Pro project where the audio is fine. I exported it as a short MP4 clip and if I play the clip in Windows Media Player the audio is there loud and clear.
But when I import the clip into a fresh Preimiere Pro CC project this clip appears with just the "film strip" icon on the far left in the Timeline panel, unlike other clips which have an icon that shows "film strip" in the background and "audio wave" in the foreground.
I'm hitting so many glitches with the CC editions of Premiere Pro and After Effects which have annoying inconsistencies between them I'm tempted to just go back to Sony Vegas Pro (single program, no hassle) but hoping most of these issues are down to "newbie incompetence". Very hard to understand why this one clip out of many should be giving me this specific problem though. Any ideas?

I'm getting so many weird results. Most go away by simply closing the project and re-opening and I only have 6GB memory but even so, I'm disappointed by what I thought was supposed to be more "world class" video editing software than Sony Vegas Pro which I found to be a lot more stable. Also struggling with differences between Premiere and After Effects. Every time I want to do something in Pro I seem to need to go to After Effects and vice-versa. After Effects lets me do more of what I could "just do" in Vegas Pro timeline, but it's hideous for lining up audio and having to render anything in RAM to even get a clue as to what a change has done. Need to add Audition to the long list as well I suspect. Fun times!

Lose audio - not video - during FaceTime

My i7 MBP loses all audio after several minutes of a FT conversation. I still get distant end audio and video but distant end gets video only - the mute button has NOT been activated. Any clues to help me????

Sorry everyone, I posted this in the wrong forum.
I reposted this in Captivate - General Discussion, titled
Audio not synching when published.
I did not know how to delete this post. Thanks!

.mpg files lose audio when imported to FCP

Has anyone lost only the audio tracks of a clip with an .mpg extention after importing to FCP? The audio plays in Quicktime, but FCP will not recognize it, nor will Soundtrack Pro. I'm at a loss here.

mpg files are muxed (mixed audio and video). FCP wants separate threads for audio and video.
Convert the files using Mpeg Streamclip (google it, it's free) to convert the files to an editable format - say DV-NTSC quicktime.
x

Loses audio then video freezes.

Well when I am streaming content I will consistently lose audio and a few seconds later the video freezes. I can then skip ahead or skip behind where the audio stopped and resume until this process happens again. There are times where this is happening every 30 seconds and other times where I can wait up to 5 minutes before I have to do this. This is happening on google chrome and firefox browsers.

I suspect you might be running into this bug:
http://forums.adobe.com/thread/1192612?tstart=30
Thanks,
Chris

Lose audio when watching movies

When I first started using ITunes and I downloaded movies they worked fine, I could watch the whole movie no problems. I think it was after perhaps the fourth movie I downloaded suddenly I started having audio issues. I'd get about 20 minutes into the movie and the audio when cut out and then go out all the way. I'd have to shut down itunes and come back about a half an hour later and I'd get another 20 minutes of the movie and then the audio would go out again. I have to do that thru the whole movie. I've done all the suggestions to fix it.....don't use the enhanced audio, reinstall Quicktime ect but nothing seems to be working.
Does anyone have any other suggestions I might be able to try?
Thanks
H.

Same problem with all headphones and earbuds--just checked settings and Volume Limit was already off--starting to think it's a volume system flaw tied to videos and related sound. No problem getting plenty of sound volume for music, only videos.

Tip: Quicktime Player capturing DV audio w/ video from firewire to New Movie

I am posting this as a new thread in hopes that it will help someone in the future, since it took me quite a bit of googling to find this info and it points to a very idiosynchratic and counter-intuitive behavior of Quicktime Player. This solution is from user jonmanheim - thank you!
Re: Trying to capture both video and audio to Quicktime Pro from DV camera
Just figured it out. A little wacky. You have to open a new Movie Recording window in QT AFTER playback starts on the camera or audio doesn't get recorded. If you first open a New Movie Recording window and THEN start playback, no audio from QT - either during playback on the speakers or during recording.

Don,
Put your 32khz clip in the timeline and select Export>Quicktime Movie Current Settings >Audio Only
Give it a useful name .e.g. Myclip audio.mov
Open up Quicktime Pro & import the file.
In QTP, Export>Sound to AIFF>Options>Compressor None>48khz/16bit/Stereo
Save the file
Once back in FCP - import the newly created AIFF file, Unlink the Audio from the Video of your clip, delete the audio from the timeline and put your new audio clip in the delete one's place and Relink the audio and video.
Good luck.
x

No audio when video played from internet

when i play videos on news media websites i get no audio.i have audio when i play mp3's and videos that go through itunes.....yes all the audio buttons & levels were checked and up....i think

Hi gbcamguy
You are in the wrong discussion forum, you should post your problem in the relevant OSX Tiger Discussion Forum. This is for OS9.
You will find more help and assistance there

Lose audio when converting avi to mp4 on quicktime

I've read the discussions on this but can't find a fix so far.
When I try and convert an avi file to mp4 using either quicktime or MPEG Streamclip, I lose the audio. I don't believe I need to download the quicktime mpeg-2 component for mac osx given I have 10.9.1, but perhaps I do (there is debate on this and I'm confused)?
I tried downloading MPEG Streamclip 1.9.3b8 but it seems to want that component to attach itself. Should I therefore buy it - will it work?
Alternatively, should I buy quicktime 7 pro? I really don't want to.
Can somebody help...please?

So I made a successful and audio distortion free ACC/AAC mpeg4 (.MP4) video from Sony Vegas for the Ziio. You are given a choice of audio (I chose 92kbps). The problem is solved. No more distortions. And all this time I was doing twice the work by importing the MPEG- files into Any Video Recorder and converting to .MP4. That was the distortion result. Hope this helps if you're doing the same kind of work by combining video and audio. Otherwise, it's up to you...
Mag

Video loses audio when using transitions

On my band's website, I frequently post videos of us rehearsing or playing at a show. Before I upload the videos, I bring them into iMovie, add a simple fade in and fade out to the beginning and end, and then save them compressed so that they download faster. I've never had a problem with this before.
Today, I tried to work on some new clips. For some reason, the fade ins and fade outs are fading the video correctly, but not the audio. Instead, the audio simply drops out during the length of the transition; it then jumps back in at 100% when the transition is complete.
I turned on "show clip volume levels" in the timeline and the volume on the transition is shown to be fading in gradually, starting at 0% and ending at 100% right before the main clip. That's correct, and that's how it's always looked in the past, except now when I play it back, the actual volume stays at 0% during the transition.
I've tried everything I could think of to fix this, with no luck. I tried importing the video separately instead of pulling it out of my iPhoto library, changing the length of the transition, using a different video file, using different transitions, etc. Nothing works. Furthermore, the problem sticks when I export the video to QuickTime, so it's not an issue just with previewing the video in iMovie. It's also persisted even after quitting and relaunching iMovie, and rebooting the computer entirely.
The only way I've been able to get around it is by selecting the video, extracting the audio, and then manually fading the audio in/out so that it matches the length of the video fade in/out. While this works, it's more work, takes more time, isn't as precise since I have to manually do it, and is totally unnecessary! The transitions are supposed to automatically apply to both the video AND its audio!
Any ideas? Please help - I have a iMovie project due on Monday and I will need to use these effects!

Hi daGUY:
The only way I've been able to get around it is by selecting the video, extracting the audio, and then manually fading the audio in/out so that it matches the length of the video fade in/out. While this works, it's more work, takes more time, isn't as precise since I have to manually do it, and is totally unnecessary! The transitions are supposed to automatically apply to both the video AND its audio!
That's the right thing to do in this case (as you found out). But, it may be that this is a one time problem and the next video will work fine...
Sue

Lose Audio when editing to tape

I am using FCP5. After about 10 minutes or rendering to tape, the blue screen with the tape comes on from my camera very briefly, and then back to the video. it does this approx. every 10 minutes. Then, after 20 minutes, the audio portion of it goes away totally (only capturing the video part). Thank you.

Thank you, Rebecca. This is new to all of us. Since I'm already a Level 4, but so far away from the points needed for Level 5 that it's an impossible situation, I'm not really trolling for points. What I am trying to do is help users to understand the new dynamics of the forums as quickly as possible.
As far as I can figure, once you've marked a post Helpful or Solved, you can't change it. It appears that you can unmark your thread Answered, though. But that's not clear to me yet.
Again, thank you for understanding.

I lose audio when I convert to FLV?

I have an MPEG-1 QuickTime video that plays fine as is with
audio but when I convert it into FLV i lose the audio? In the
export options I dont even get the option to select the audio.
I have encoded to FLV numerous times and have never run into
this problem. Thanks for any help that can be provided.
-79

TVBroadcastTeacher wrote:
IWhenever I compress the files to mpg in any of the 3 non-transport formats, audio is affected.
Transport streams aren't acceptable for their broadcast requirements?
Russ

QuickTime Editing Basic - Loses Audio when Video is Edited

Similar Messages

Maybe you are looking for