Quicktime embedding problem

I always hated doing site upgrades when the original site was
done by someone else. But sometimes I gotta bite the bullet, case
in point as I'm so frustrated and now turn to the DW gods for help!
The site is
http://www.kanefilms.tv/
problem - if you click on the Demo Reel the page comes up but
no QT video
the seond link works fine the other links work
I redid the embedding and the link works on both the local
and remote files (preview in Browser) but son as I go to open the
page from the url the QT movie is not there. It has to be the
embedding as the other linked pages to that QT show the page but no
QT as well. There are 4 links on the page the only one working is
the second link, the 1st 3rd and 4th were never finished by the
person who originally did the site, I'm in DW CS3
Anyway I have included the html in the page with the bum link
that works under the condtions I mentioned, can anybody tell me
what the problem is here?

Any chance of moving to Flash instead of QT?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"mentlity" <[email protected]> wrote in
message
news:g7oajr$3c6$[email protected]..
>I always hated doing site upgrades when the original site
was done by
>someone
> else. But sometimes I gotta bite the bullet, case in
point as I'm so
> frustrated
> and now turn to the DW gods for help!
> The site is
http://www.kanefilms.tv/
> problem - if you click on the Demo Reel the page comes
up but no QT video
> the seond link works fine the other links work
> I redid the embedding and the link works on both the
local and remote
> files
> (preview in Browser) but son as I go to open the page
from the url the QT
> movie
> is not there. It has to be the embedding as the other
linked pages to that
> QT
> show the page but no QT as well. There are 4 links on
the page the only
> one
> working is the second link, the 1st 3rd and 4th were
never finished by the
> person who originally did the site, I'm in DW CS3
>
> Anyway I have included the html in the page with the bum
link that works
> under
> the condtions I mentioned, can anybody tell me what the
problem is here?
>
>
>

Similar Messages

Font embedding problem PPT plugin Acrobat 9 Pro

Hi,
having just updated to Acrobat 9 Pro I encounter a font embedding problem when using the PowerPoint plugin (PPT2007) to create a PDF of my presentation. I am working under Windows 7 (64Bit) and use fonts from Mathematica (Wolfram). The generated PDF shows problems displaying the fonts, indicating that they have not been embedded (although font embedding of these fonts is set in the options). The problem does not occur if I directly print to the PDF printer - here all Mathematica fonts are correctly embedded (but this has other disadvantages since videos/animations are not integrated). The problem seems to be specific to Acrobat 9 since under Acrobat 8 everything worked correctly as well.
Any ideas/solutions for that issue?
Thanks & best regards
Ralf

Perhaps you may need to upgrade to version 9.2 (Acrobat support of Windows 7 begins at this dot release)?
Be well...

Quicktime encounters problem and must close. Sorry for inconvenience.

I have downloaded Quicktime now 3 times and each time downloaded it again after first removing it from the control panel. Up to a few months ago I never had a problem and used it for many years as such. I think the problems started when the combination iTunes/Quicktime came on the market but I might be wrong. I have downloaded the combination, then Quicktime separately and iTunes separately but to no avail.
I am an amateur in the field of problem soving so ask for your help. I have the icon sitting on the desktop but when I click on it I get immediately the message:
"Quicktime encounters problem and must close. Sorry for inconvenience." What I don't think I had before is the fact that during installing I say the Icon appearing on my desktop and immediately my computer goes black and start
a reboot. So I suppose my problem can be anything.
I most likely messed something up.
Your assistance is greatly appreciated.

What I don't think I had before is the fact that during installing I say the Icon appearing on my desktop and immediately my computer goes black and start
a reboot.
That's a bit disconcerting. Are you getting a flash of a blue screen as well?
We can make "hidden" blue screens stick around a little longer by using the following technique:
1) Open your system control panel (Start->Control Panels->System).
2) Select the "Advanced" tab.
3) Click the "Startup and Recover" section's "Settings" button
4) Verify that under "System Failure" the "Automatically restart" checkbox is not checked.
Make those settings changes, and try another install.
If you do get a blue screen this time, what numerical and text codes are you getting with it? (ie 0x[zeros/letters/numbers] CAPSANDUNDERSCORES)
if the blue screen mentions a specific file, let us know what that is called too. (exact spelling, please.)
here's a reference on the sorts of things i'm asking about:
Troubleshooting Windows Stop Messages

Pro Tools files imported to FCP X causing QuickTime movie problem

Well 2 days later and hours on the phone with Apple tech support Senior Advisors, and problem still not solved. HELP.
Everything works fine in FCP X, but when I create the QuickTime movie, it is way out of sync (by many seconds).
We have isolated the problem to audio files that I am exporting to Pro Tools, processing, and then importing back into FCP X. I can create a QuickTime movie with the original video/audio and it is fine.
Information
The original video came from Canon HF M40 camcorder: AVCHD (using MPEG4-AVC / H.264 compression codec), MTS format. Audio is 48kHz, 24 bits.
I used ClipWrap to rewrap the video into ProRes 422 and decompress the audio and save as LPCM.
I simply provide this FYI. As I said earlier, the original video works fine and the resulting QuickTime movie works fine. So the original files imported into the FCP project are not the problem.
The creation of the problem audio occurs as follows:
- Detach the original audio from the original video, and export
- Import this audio into a 48.0 kHz/16-bit Pro Tools HD session and EQ/limit the audio
- Import the resulting audio into FCP X (exact same length file, audio waveforms aligned with the original audio).
This audio works fine in FCP. It is in sync with the video, everything looks great.
I ran Pro Tools at 16-bits because a senior advisor told me FCP runs at 16-bits but does not convert imported stand-alone audio (as opposed to combined video/audio) to 16-bits; thus the Pro Tools session had to be at 16-bits. I changed from 24-bits to 16-bits, and this didn't solve the problem. (FYI, when Pro Tools imports the original audio exported from FCP, it says the audio is 24-bits, not 16-bits).
What is the problem?
The basic question is why does this audio cause QuickTime a problem?
Something is going on in the conversion to the QT movie. In FCP X, I don't have a way to play with the conversion variables except to set "Video and Audio" and "Use current settings" (which is ProRes 422).
The only difference I see between the original audio and the Pro Tools audio is that the original audio is stereo and Pro Tools works with dual mono files (L & R). The mono files work fine in FCP and I can't imagine why QT would have a problem with these, but I haven't tried converting the files to stereo before importing into FCP.
I should also mention that I selected the stabilization and roll correction algorithms in FCP. I assume these don't create problems in QT. I mention this because I didn't use them when I tested making a QT movie with the original video/audio files.
FCP and Pro Tools are used together all the time to do exactly what I am doing......improve the sound of the original audio. They are the premier video and audio professional programs. Of course, the final product is often not a QuickTime movie, but many times it is a QT movie.
What the heck is going on???
HELP.

(1) It is immediately out of sync. It even appears to be speeded up to me initially, but this is subjective. But it is clearly out of sync throughout, not a gradual drift.
(2) When I create the audio files in the Pro Tools session, the files are automatically stored in the audio folder of the Pro Tools session. So I don't actually have to go through an export process. I just close the Pro Tools session, then open FCP X and import the audio from the Pro Tools folder.
I'm not sure what additional specifications you seek, other than:
- wav files
- sample rate = 48 kHz
- Bit rate = 16-bits (and earlier I used 24-bits)
- Files are dual mono, rather than stereo (name_01.L.wav, name_01.R.wav). As I mentioned above, I have not yet tried converting these to stereo before importing into FCP, to see if dual mono causes an issue with QT. It does not cause a problem in FCP. I will try this today if we don't solve the problem.
(3) I can upload a portion of the audio to a server and send you a link to the file so you can download it. Is there a way to private message on the forum so I can get an email address to send you the link?
(4) The original video came from Canon HF M40 camcorder: AVCHD (using MPEG4-AVC / H.264 compression codec), MTS format. Audio is 48 kHz, 24 bits.
I used ClipWrap to rewrap the video into ProRes 422 and decompress the audio and save as LPCM.
The FCP Project was set up at:
- Starting time code - 01.00.00.00
- Format - 1080p
- Resolution - 1920 x 1080
- Frame rate - 29.97p
- Audio channels - stereo
- Sample rate - 48 kHz
- Rendering format - Apple ProRes 422

Need Solution for iWeb/QuickTime viewing problem in IE 6 for Windows

When viewing an iWeb page in IE 6 for Windows with a background picture and a QuickTime movie embeded, the QT movie frame will "smear" when the page is scrolled. More specifically, The QT movie frame will not lock into its proper position as long as the page has a background picture selected in iWeb when viewing w/ IE 6 for Windows. Does anyone know of a solution for this? Does this problem still exist w/ later versions of IE for Windows?
By the way, if you don't already know this, changing the Page Background setting back to the default of 'Color Fill' in iWeb and republishing will not correct the problem once a background picture is selected for a page. You have to set the Page Background setting to 'None' and republish. The movie frame will then be locked into place when scrolling the page in IE 6 for Windows.
MBP 17in (1 GB RAM), PB G4 15in, PB G4 12in, iMac G3 Mac OS X (10.4.7) Loyal to Apple since the Apple ][+

Someone else posted that you may have to remove the image altogether, publish, then place the replacement image. The images for the background of my newest pages use this as a tiled background successfully.
http://web.mac.com/makentosh/iWeb/tipsfromtheiceberg/Images/background.jpg
I'm not sure how well tiling would work on your page though since it would begin to repeat vertically when you don't want it to (for me, tiling is exactly what I needed).

Quicktime Pro, Problem Converting Video to iPod

When I convert my movie files using Quicktime Pro I encounter a problem. After the converting is over the video works on my iPod, but the audio track is lost and there is no sound. Can anyone help me?
Thanks
-Jason

Check to make sure it is not a muxed mpeg by opening the source file in QT Player and looking at MovieInfo in the Windows menu. If it is a muxed mpeg you will have to use something other than QT since it will not export the sound from mpegs. Some people have had good results with this freeware, but there are other Windows programs starting to appear for iPod conversion:
http://www.videora.com/en-us/Converter/iPod/

ITunes / Quicktime Video Problems With Windows VISTA

I took up Windows Vista as soon as it was available and initially had no problems with iTunes. Then later, video clips (those purchased from iTunes and those I had converted myself) started stuttering / freezing and eventually crashing iTunes and finally I lost audio as well.
Ayyway to cut a long story short, I have uninstalled / re-installed Vista now about eight times for problems with installing drivers for USB devices (I've finally solved all these problems). After the last install the first program I installed was iTunes, tried video and it worked flawlessly. Then, each time I added a hardware device or program I would restart Vista and retry iTunes video.
The first item I added was a USB thumb drive (as I had on all previous occasions to take advantage of Vista's 'Ready Boost'). The thumb drive is a 'Sony 2GB micro vault tiny', and meets the transfer speed requirements for 'Ready Boost', as soon as I had set the drive up for 'Ready Boost' I started having the same problems with iTunes video and Quicktime.
Removed the thumb drive, restarted iTunes and had flawless video playback again. Have tried this over and over with the same result.
So my question is, has anyone else had video playback problems with iTunes / Vista and found similar problems. Trying to tie down whether this is a compatability problem with 'Ready Boost' or the thumb drive used. I have also tried a Sandisk Titanium 2GB with the same result.
I am not sure exactly how 'Ready Boost' works, I thought it added memory that was used to cache page files to the thumb drive instead of to the HDD making a faster seek /access time? Which should make things faster. Another article I read today was talking about 'Ready Boost' being an affordable extension to RAM, in this case I could understand the problem as I would think the access to a USB 2.0 thumbdrive would be slower than that to RAM.
Any help appreciated, but I guess my bottom line is anytime I want to watch video on iTunes, I just pull the USB thumb drive .
PC Pentium 4 Other OS Windows Vista Home Premium

I have the same stuttering video issues with iTunes and Vista. While I have used a thumb drive to transfer files (not Sony) I have not yet messed with Ready boost. I have seen several others complain about the video problem, perhaps they will chime in as well. Unfortunately, your solution doesn't work for me. I pretty much ignore iTunes, waiting for the next version (only god knows when it will be released).
I do have an external firewire drive connected, I'll disconnect later today and see if that has any affect.

Font embedding problem when re-saving pdfs in Preview

I love the new features in Preview. Especially, being able to reshuffle pages and to be able to add and delete pages to documents, and the improved annotation features.
This is what I did and encountered this problem. I have a pdf that I annotated and added pages to.
I re-saved the document under a different name. On Leopard, and also on a Tiger computer, the document looks fine.
I sent it to a client on a PC and the PC complains with this re-saved document that it "Cannot extract the embedded font 'HEMGNF+Sabon Italic'. Some characters may display incorrectly." This cryptic 6-letter name of the font can change by the way, in these PC-messages.
This only happens when I re-save the document in Preview.
Anybody else who's had this?

Update: Reader 8 on a PC displays everything fine, so it's a matter of updating

Itunes and quicktime install problem

I have just bought an ipod classic. went to apple.com, downloaded latest version of itunes, on the install i get an error saying some of the quicktime software is out of date to fix this problem by upgrading click 'Go there now'
unfortunately it doesn't go anywhere!
itunes will not start because of this either, it says it has a problem and needs to close.
I have tried installing older versions of itunes,Quicktime;un-installing,re-installing,installing seperately, from different sites as well as apple, butit ends up the same.
im only running windows firewall and AVG anti virus.
can anyone help me as to why i can't install them especially Quicktime as it seems i need that for itunes and i need itunes to load the ipod!
Please help if you have any ideas, i've been trying now for 5 hours!!!!

Try installing from here:
http://www.filehippo.com/downloadquicktimeplayer/
If that doesn't work, try and use Microsoft's Cleanup Utility and then reinstall Quicktime/iTunes:
http://support.microsoft.com/kb/290301
Make sure it's a new and fresh download from:
http://www.apple.com/itunes/download/

Itunes and quicktime major problems...

I can't get itunes to work at all and now quicktime's stopped functioning! I get the usual "Sorry for the inconvenience but itunes has encounted a problem and needs to close" every time I try and start it. I've installed quicktime from the main apple download and it installs fine but won't actually work! I've tried uninstalling quicktime but I get the message ' fatal error during installation' and it quits the uninstall. I've uninstalled itunes and after reinstalling it get the same 'sorry for the inconvenience' message again. Need assistance from an itunes expert please. Thanks.

hmmmm. i'm better at the 6.0.x and 5.0.x versions of this. but let's try some things here.
the message that you're getting with the QT uninstall is a variation of the 1603 error message that folks used to get in the 6.0.x and 5.0.x days. so we'll atart working through some of the techniques that used to work with it on a QT uninstall/install in those days.
Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
Description of the Windows Installer CleanUp Utility
next, clear leftover QuickTime program files and folders from the PC.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
restart your PC, and try installing iTunes again.
does the install go through properly this time?

Google map embeding problem for Indesign CC

Hi All,
I am having problem with embeding map to a indesign CC page.
- In Object menu I select "Insert HTML.."
- Edit HTML box appears, I paste the code into the box.
* text box appears says "This is an HTML Snippet"
- I select map code
122.79779808995053!3d49.02417660939079!3m2!1i1024!2i768!4f13.1!3m3!1m2!
1s0x5485c3820f643043%3A0x7d3de73b4af7e79f!2sWhite+Rock+Library!5e0!3m2!
1sen!2sca!4v1393030057275"width="600" height="450" frameborder="0"style="border:0"></iframe>
After I paste error message:
" JavaScript Error encountered while loading HTML"
Do I need script, if so where can I get it.
Please help!!!
atamtan
PS. I use same codes for Adobe muse no problem.

Hi,
I tried did not work, I thought may be the page or document damaged, re
installed the InDesign, and tried with new documents, still same answer.
Thank you for the suggestion.

Font embedding problem in PDFs

Since upgrading to Leopard from Tiger-
We are losing fonts embedded into pdfs, either saved through Preview or Adobe Indesign CS3.
The preview of pdfs, both in the finder windows and in Entourage email attachments are missing fonts too. Sometimes opening them resolves the issue, but not usually.
This has occured to both User and System level fonts.
We have cleaned the font caches, but this only provides a temporary fix.
We have tried not using our Suitcase Fusion and just letting FontBook manage the fonts on this machine, the problem still manifests itself.
The only change in the equation from a perfectly operational machine was the change from Tiger to leopard.
Any thoughts/help = greatly appreciated.
Matt

Update: Reader 8 on a PC displays everything fine, so it's a matter of updating

Font embedding problem when exporting to PDF

I'm trying to export a 100-page catalog from InDesign CS4 to PDF. I've used Lucida Sans Regular throughout as body text. When I go to export, it says that this font can't be embedded due to licensing restrictions in the font. Thoughts? I've exported this catalog to PDF many times as changes get made and I update it regularly throughout the year, and I've never had a problem with this font (or any for that matter!)

I just posted this message related to your question under another topic:
http://forums.adobe.com/message/2397381#2397381
It might have been more appropriate to post in response to you, Emily. At the bottom of my post is a solution you can use, but it involves changing the font in the final product. I also like Lucida Sans, and I've had this exact problem that I never experienced before the upgrade to CS4. Unfortunately, the problem is not limited to Lucida Sans.
I see you posted the original question back in August. I hope this is some help to you at this late date.
Jeff

Dreamweaver CS3 Scripting Youtube embedding Problems

I use embeds from youtube on my site. They are usually no
problem. Today I
upgraded from Dreamweaver 8 to CS3. When saving my files and
uploading to the host, CS3
created two scripts that it said were necessary for
standards-based sites and
applications:
AC_Activex.js
AC_Runactivecontent.js
CS3 indicated that they must be uploaded in "Scripts" folder
to host. Now all my
embeds show up as a red x in IE7. Oddly enough they work in
Monzilla. Sounds like a version problem doesn't it? Although of
course my host (Bluehost) says it ain't their problem.

Check out the following extension:
http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1327520
From the looks of your code you were embedding Youtube links
as if they were Flash. However, while they are Flash, Youtube has
its own system for embedding. I believe Youtube does provide you
with code to do this. However, this plugin should do it all for you
from within Dreamweaver.

QuickTime/Flash problem with Firefox - Redux

I know people are having problems getting Flash content to play on the latest version of Firefox (7) for Macs. I know it has something to do with QuickTime interceding on behalf of Flash Player and screwing with Firefox's mind. Following instructions on this forum, I downloaded the latest version of Flash Player 9, loaded it, and everything worked fine -- as long as I didn't quit Firefox. Opening Firefox again, the problem's back. Returning to your forum, you suggest I go into QuickTime's preference menu and turn off Flash in the Advanced section. Trouble was, it wasn't on. So, now what do I do?
Also, I really don't want to turn off Flash in QuickTime. I will be making Flash movies again soon, and QuickTime is integral to that. I also like Firefox. I really don't want to stop using it. Has anyone told Mozilla they really screwed up and need to fix this problem?
LAD
Message was edited by: LAdolli

You mean Firefox version 2.0.0.6. That's the latest version.
In the preferences for Quicktime-->Enable Flash-->leave unchecked. That's to play .swf (flash) that is wrapped in a Quicktime container. And Quicktime only supports .swf (flash) version 5 and below... Really not a selling point... What are they up to version 8/9 now? To me not worth making any more. Unless your using flash to make sprites to use in Qt. And at that point you knew to know actionscript for version 5 of flash.
If you come across a .swf/quicktime a popup window will ask you if you want to activate it. When you close out the browser window it will revert to being off again.
Go to the MIME Settings that is just below that Enable Flash box. Scroll down to the bottom... Miscellaneous file Formats. Uncheck Flash media. This one really needs to be off!!!
As far as I know Quicktime really doesn't play a part in Flash anymore. As a container.

Quicktime embedding problem

Similar Messages

Maybe you are looking for