Quicktime error 0 on firefox 5.0.1

I have the browser mozilla firefox, And it works fine except every time i go to clear my history it gives me the quicktime 0 error saying it's not installed, Even through it is and using the repair option only fixes it for a limited amount of time, I'd like a fix for this cause i find it beyond annoying.

Udate:  The contained Quicktime file that I exported from FCPX rendered fully with no errors in Compressor, so I guess I"m in the clear, but I think this was an unnecessary extra step.  Its a mystery why I was getting the error when sending the render to Compressor from within FCPX. 
Anyone else that has this issue, please share any solutions if you have them.

Similar Messages

  • Cisco web voicemail doesn't work w/ Chromium -- quicktime error

    My company uses web voicemail so I can listen from my phone or browser interface. For some reason, it's not picking up what it needs with Chromium. The web page loads (us-voicemail-01.company-domain.com/inbox), and I get the following errors when I click the play button:
    you must have quicktime installed to play voicemails in this browser
    missing localized string: quicktime.error.notininstalled
    quicktime.error.notininstalled
    error occurred while playing back
    This is chromium 21.0.1180.89-1.
    I also installed chromium-pepper-flash-stable 11.3.31.232-1 with no change in behavior.
    Google-chrome doesn't work either. I also get the same error if I install openssl098, which comes up in a pacman message as being needed to use Google's build in flash support.
    Firefox does work... and I'm trying to find out why. Obviously I don't have quicktime installed on my machine anywhere, so it can't actually be a quicktime issue since Firefox doesn't have it either.
    Any suggestions? I tend to use Chromium, and while opening Firefox to check messages isn't a huge deal, it's obviously not preferred.
    Last edited by jwhendy (2012-09-17 16:14:08)

    I'm extremely sorry to confirm that I do know the story behind 'gecko-mediaplayer' and that it works quite well with Google Chrome (of course, it is listed among its plugins)...
    Edit: ad rem the OP:
    jwhendy wrote:Does my flash plugin version matter? Should `flashplugin` be any different than `pepper-flash-plugin-stable`?
    Were I you, I'd decide whether to use libflashplayer.so or libpepflashplayer.so. I disabled the first one in Google Chrome, so I guess you may do so as well.
    As for the QuickTime based voice mail, I believe that it may work if only the above mentioned plugin works. If you have Google Chrome v. 21.0.1180.89, go and check if any trailer @ iTunes is playable for you (I've just checked again and for me it is, both audio and video, just as it was yesterday).
    Last edited by bohoomil (2012-09-18 01:24:39)

  • I am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help

    i am facing problems while openin an application in facebook and other places.when i go to the application,an error shows and firefox closes autmatically either i send error reports or dont.....plz help

    Notes:
    1) Please use the code tags when posting code or JNLP/HTML. It helps to retain indentation and avoids asterisks and plus sings being interpreted as formatting marks. To do that, select the code/JNLP etc. and click the CODE button seen on the Plain Text tab of the message posting form.
    2) That launch file is invalid. You might check it (and the project in general) using JaNeLA.
    3) The only place that SimpleSerial class could be, that the JRE would find, is in the root of aeon.jar. Is it actually there?

  • Hi.  Ever since I downloaded the last itunes and quicktime update (a week or so ago), I can't access any video podcasts or movies I have stored in itunes.  iTunes keeps crashing and telling me I have a quicktime error.  Do I uninstall quicktime? or?

    Hi .  Ever since I downloaded the last itunes and quicktime update ( a week or so ago), I can't access any movies or video podcasts i have store in itunes on my pc (vista).  iTunes crashes and my error reports tell me it is a quicktime error.  Do i uninstall and reinstall quicktime, or completely uninstall itunes and reinstall it -- if so, what will i lose?  Help, please!

    Let's try the following user tip:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • I am trying to download Firefox on my laptop which runs Vista. I am getting the following error message: Your Firefox profile can't be loaded, it may be missing or innaccessible." Please help.

    I am trying to download Firefox on my laptop which runs Vista. I am getting the following error message: Your Firefox profile can't be loaded, it may be missing or innaccessible." Please help.

    See:
    * http://kb.mozillazine.org/Recovering_a_missing_profile
    * http://kb.mozillazine.org/Profile_in_use
    * https://support.mozilla.com/kb/Firefox+is+already+running+but+is+not+responding

  • Quicktime error -2048 when trying to play.mov files.

    I have been frustrated this weekend trying to find a solution to a problem that has only recently occurred accessing some digitised VCR tapes that had been archived on an external HDD. These are files that played back fine on my Quicksilver after I had recorded them, but now give a "Movie Not Available" message in Quicktime. However when opened in VLC I get a debug message box with the following information posted below. Any clues as to what might be the problem?
    I recorded the files from my VCR using an ADVC-100 DA converter over firewire into BTV Pro which created .mov files (DV-PAL). When I try to open the files in BTV Pro, I get a message box "There was an error opening the movie. No Movie found. Error code 20,-2048" Did a search for this error and -2048 appears to be a Quicktime error, so am wondering if there is a problem with my installation of Quicktime. I have got all the usual suspects in stalled, Flip4Mac, Perian, VLC. Mpeg Streamclip but can't get the file to open. The external HDD is Mac formatted but I found some info about problems with missing resource forks in older .mov files causing problems if copied to NTFS HDD's.
    Any ideas as to where to look next will be appreciated.
    +main debug: CPU has capabilities AltiVec FPU+
    +main debug: looking for memcpy module: 2 candidates+
    +main debug: using memcpy module "memcpyaltivec"+
    +main debug: thread started+
    +main debug: thread 26421248 (Interaction control) created at priority 0 (../../src/interface/interaction.c:382)+
    +main debug: Creating an input for 'Media Library'+
    +main debug: Input is a meta file: disabling unneeded options+
    +main debug: `file/xspf-open:///Users/irdesigns/Library/Preferences/VLC/ml.xspf' gives access `file' demux `xspf-open' path `/Users/irdesigns/Library/Preferences/VLC/ml.xspf'+
    +main debug: creating access 'file' path='/Users/irdesigns/Library/Preferences/VLC/ml.xspf'+
    +main debug: looking for access module: 3 candidates+
    +access_file debug: opening file `/Users/irdesigns/Library/Preferences/VLC/ml.xspf'+
    +main debug: using access module "access_file"+
    +main debug: TIMER module_Need() : 26.549 ms - Total 26.549 ms / 1 intvls (Avg 26.549 ms)+
    +main debug: Using AStream*Stream+
    +main debug: pre-buffering...+
    +main debug: received first data for our buffer+
    +main debug: creating demux: access='file' demux='xspf-open' path='/Users/irdesigns/Library/Preferences/VLC/ml.xspf'+
    +main debug: looking for demux module: 1 candidate+
    +playlist debug: using XSPF playlist reader+
    +main debug: using demux module "playlist"+
    +main debug: TIMER module_Need() : 19.485 ms - Total 19.485 ms / 1 intvls (Avg 19.485 ms)+
    +main debug: `file/xspf-open:///Users/irdesigns/Library/Preferences/VLC/ml.xspf' successfully opened+
    +main debug: looking for xml module: 2 candidates+
    +main debug: using xml module "xml"+
    +main debug: TIMER module_Need() : 99.281 ms - Total 99.281 ms / 1 intvls (Avg 99.281 ms)+
    +playlist debug: parsed 0 tracks successfully+
    +main debug: removing module "xml"+
    +main debug: EOF reached+
    +main debug: control type=1+
    +main debug: removing module "playlist"+
    +main debug: removing module "access_file"+
    +main debug: TIMER input launching for 'Media Library' : 71.406 ms - Total 71.406 ms / 1 intvls (Avg 71.406 ms)+
    +main debug: thread started+
    +main debug: waiting for thread initialization+
    +main debug: thread 25213440 (preparser) created at priority 0 (../../src/playlist/thread.c:79)+
    +main debug: thread started+
    +main debug: waiting for thread initialization+
    +main debug: thread 26413056 (fetcher) created at priority 0 (../../src/playlist/thread.c:108)+
    +main debug: thread started+
    +main debug: waiting for thread initialization+
    +main debug: rebuilding array of current - root Playlist+
    +main debug: rebuild done - 0 items, index -1+
    +main debug: thread 26417152 (playlist) created at priority 0 (../../src/playlist/thread.c:117)+
    +main debug: looking for interface module: 1 candidate+
    +main debug: using interface module "hotkeys"+
    +main debug: TIMER module_Need() : 48.316 ms - Total 48.316 ms / 1 intvls (Avg 48.316 ms)+
    +main debug: thread started+
    +main debug: thread 25212416 (interface) created at priority 0 (../../src/interface/interface.c:168)+
    +main debug: looking for interface module: 17 candidates+
    +main debug: using interface module "signals"+
    +main debug: TIMER module_Need() : 34.354 ms - Total 34.354 ms / 1 intvls (Avg 34.354 ms)+
    +main debug: thread started+
    +main debug: thread 26470400 (interface) created at priority 0 (../../src/interface/interface.c:168)+
    +main: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.+
    +main debug: looking for interface module: 4 candidates+
    +main debug: using interface module "macosx"+
    +main debug: TIMER module_Need() : 511.368 ms - Total 511.368 ms / 1 intvls (Avg 511.368 ms)+
    +main debug: thread started+
    +main debug: thread 26482176 (interface) created at priority 0 (../../src/interface/interface.c:148)+
    +main debug: no fetch required for Playlist (art currently (null))+
    +main debug: adding item `testing.mov' ( /Volumes/IR My Book/BTV Videos ƒ/testing.mov )+
    +main debug: rebuilding array of current - root Playlist+
    +main debug: rebuild done - 1 items, index -1+
    +main debug: starting new item+
    +main debug: processing request item testing.mov node Playlist skip 0+
    +main debug: resyncing on testing.mov+
    +main debug: testing.mov is at 0+
    +main debug: creating new input thread+
    +main debug: Creating an input for 'testing.mov'+
    +main debug: waiting for thread initialization+
    +main debug: thread started+
    +main debug: thread 26771456 (input) created at priority 22 (../../src/input/input.c:370)+
    +main debug: `/Volumes/IR My Book/BTV Videos ƒ/testing.mov' gives access `' demux `' path `/Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
    +main debug: creating demux: access='' demux='' path='/Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
    +main debug: looking for access_demux module: 2 candidates+
    +main debug: no fetch required for Playlist (art currently (null))+
    +macosx debug: input has changed, refreshing interface+
    +macosx debug: notification received in VLC with name VLCOSXGUIInit and object VLCEyeTVSupport+
    +main debug: no fetch required for Playlist (art currently (null))+
    +main debug: TIMER module_Need() : 1288.828 ms - Total 1288.828 ms / 1 intvls (Avg 1288.828 ms)+
    +main debug: creating access '' path='/Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
    +main debug: looking for access module: 8 candidates+
    +vcd debug: trying .cue file: /Volumes/IR My Book/BTV Videos ƒ/testing.cue+
    +vcd debug: could not find .cue file+
    +access_file debug: opening file `/Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
    +main debug: using access module "access_file"+
    +main debug: TIMER module_Need() : 110.747 ms - Total 110.747 ms / 1 intvls (Avg 110.747 ms)+
    +main debug: Using AStream*Stream+
    +main debug: pre-buffering...+
    +main debug: received first data for our buffer+
    +main debug: pre-buffering done 1408981 bytes in 0s - 9031 kbytes/s+
    +main debug: creating demux: access='' demux='' path='/Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
    +main debug: looking for demux module: 59 candidates+
    +mp4 debug: found Box: mdat size 32+
    +mp4 debug: skip box: "mdat"+
    +mp4 debug: found Box: mdat size 18891508192+
    +mp4 debug: skip box: "mdat"+
    +mp4 debug: dumping root Box "root"+
    +mp4 debug: | + mdat size 32+
    +mp4 debug: | + mdat size 1711639008+
    +mp4 debug: file type box missing (assuming ISO Media file)+
    +mp4 error: MP4 plugin discarded (no moov box)+
    +avformat debug: detected format: mov,mp4,m4a,3gp,3g2,mj2+
    +avformat error: avopen_inputstream failed+
    +lua debug: Trying Lua scripts in /Users/irdesigns/Library/Preferences/VLC/lua/playlist+
    +lua debug: Trying Lua scripts in /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/anevia_streams.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/appletrailers.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/bbccouk.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/break.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/canalplus.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/cue.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/dailymotion.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/france2.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/googlevideo.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/joox.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/koreus.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/lelombrik.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/megavideo.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/metacafe.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/youtube.lua+
    +lua debug: Trying Lua playlist script /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/lua/playlist/youtube_homepage.lua+
    +lua debug: Trying Lua scripts in /Applications/VLC ƒ/VLC.app/Contents/MacOS/share/share/lua/playlist+
    +ps error: cannot peek+
    +vobsub debug: could not read vobsub IDX file+
    +dummy error: unknown command `/Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
    +subtitle debug: subtitle demux discarded+
    +main warning: no demux module matching "mp4" could be loaded+
    +main debug: TIMER module_Need() : 1954.294 ms - Total 1954.294 ms / 1 intvls (Avg 1954.294 ms)+
    +main error: no suitable demux module for `/:///Volumes/IR My Book/BTV Videos ƒ/testing.mov'+
    +main debug: finished input+
    +main debug: dying input+
    +main debug: removing module "access_file"+
    +main debug: thread ended+
    +macosx debug: input has stopped, refreshing interface+
    +macosx debug: addition to non-blocking error panel received+
    +main debug: dead input+
    +main debug: thread 26771456 joined (../../src/playlist/engine.c:244)+
    +main debug: TIMER input launching for 'testing.mov' : 3573.150 ms - Total 3573.150 ms / 1 intvls (Avg 3573.150 ms)+
    +main debug: starting new item+
    +main debug: changing item without a request (current 0/1)+
    +main debug: nothing to play+
    +main debug: no fetch required for Playlist (art currently (null))+

    Well it used to work fine so I think so. When I try and run the installer you linked to I get a message saying that a later version is already installed- isn't it built into the latest QT releases? One thing I thought of- the original files I think were made on a mac so there were some resource fork files of 4K size. I deleted these as I kept trying to open them by mistake, but then after this trouble I dragged them back out the trash to the original location but it didn't fix the problem- could that have caused some sort of association problem?

  • In attempt to burn blu-ray, I get QuickTime error 0.  Takes hours to export a 7 minute movie from timeline, then get notice it fails.  What's going on here?

    New problem just started 24 hours ago.  When I try to export from the time line to create a QuickTime file, a 7 minute movie on time line takes 3 hours to export and then the export fails, where as a few days ago, that export would take about 10 minutes at most.  I get the same failure notice when I try to share to blu-ray, DVD, or Vimeo.  Tried to use compressor, no such luck as compressor failed to make a .mov file.  I get QuickTime error 0 message about 5 minutes into trying to share to Blu-Ray now.   Does anyone know what is going on here?  I'm running latest update of Snow Leopard on an intel Mac Pro and the latest update to Final Cut Pro X.  I've also installed QT 7.6.6 to use in creating time lapse movie files.

    Same problem here, too. Final Cut Pro X 10.0.3 on OS 10.6.8. However, it is only doing it on ONE of my projects. A 4-second test project burned successfully.
    I'm  actually going to use iDVD to burn copies for a few people, so I only need the movie file from FCPX.
    Would someone please post best export settings for use on a DVD? In FCPX, the project is  in HD (1080p) with all media optimized to ProRes 442. I know it will have to be down-sampled to DVD resolution, but I've always been curious to know what settings will result produce the best possible quality in DVD resolution.
    Thank you!
    Bart

  • Quicktime error code : -3

    My Toshiba Tecra S2 laptop running XP Pro SP2 went in to standby and froze there (common problem). Upon rebooting iTunes "has encountered an error and needs to close" every time I try to run it.
    I have uninstalled, re-downloaded and upon attempting re-install I get "Quicktime error code : -3" and the install fails.
    This is driving me crazy. Any ideas

    I deleted the iTunes folder in MyDocuments/MyMusic (renaming iTunes.old instead of deleting will preserve files)and re-installed and everything appears to work.

  • I am having error message of "firefox has stopped working".i unstill and delete folder in my directory adn i again reinstall but its still showing same error

    I having the error message of "Firefox has Stopped working" and having following problems list out in the problem list text area is
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: firefox.exe
    Application Version: 20.0.1.4847
    Application Timestamp: 51650aee
    Fault Module Name: KERNELBASE.dll
    Fault Module Version: 6.1.7600.16385
    Fault Module Timestamp: 4a5bdaae
    Exception Code: c0000005
    Exception Offset: 00007b69
    OS Version: 6.1.7600.2.0.0.256.1
    Locale ID: 16393
    Additional Information 1: 59d2
    Additional Information 2: 59d28f4851ee3e61e3aa57edc696ac9e
    Additional Information 3: 38b6
    Additional Information 4: 38b6ae8359371108855a2a4e84f0ea47
    Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt
    i uninstall and delete the mozilla firfox in my directory and reinstall tha lastest version but its still showing the same error message.

    i experienced the same problem. this is what i did:
    *right click firefox
    *click properties
    *click compatibility tab
    * check "Run this program in compatability mode for:"
    * on dropdown choose Windows 7.
    * click ok or apply.
    this solution solved my problem.i hope it will work on yours too.

  • I am trying to log in to my MSN Hotmail e-mail account, and after entering my login info, I get the error message that Firefox cannot find the server. Why not?

    When trying to log into my MSN Hotmail account (@msn.com), after I enter my credentials, Firefox gives me an error message that "Firefox can't find the server at blu152.mail.live.com". I am able to log in easily from the same computer using Internet Explorer. I think this problem just started yesterday. Why is Firefox unable to connect to my e-mail account?

    Clear the cache and the cookies from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"

  • Quicktime errors during install, uninstall, or run

    Quicktime errors during install, uninstall, or run. No error code. It just says it encountered an error and must exit.

    I located a previous response that satisfied my issue. Below is the process that allowed me to use quicktime.
    The "fatal error" in this context has (recently) been indicating trouble with old, misplaced QuickTime componentry lurking about in your system.
    (Whether or not the message is a symptom of that problem seems to depend on what version of old misplaced stuff is lurking and what version of QuickTime proper we're trying to install or uninstall ... but in recent times, there's been an uptick in fatal errors being caused by that.)
    So let's try investigating that possibility first.
    First we'll adjust some view settings on the PC.
    1. Open My Computer from the desktop or Start menu.
    2. In the Tools menu, click Folder Options.
    3. Click the View tab.
    4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
    5. Click OK.
    Now in "My Computer" open Local Disk C: (or whichever drive your operating system is installed on).
    Open the "Windows" folder.
    Open the "System32" folder.
    What files or folders can you see in there with QuickTime in the file or folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • I'm a character error problem in firefox. How can I solve.

    I'm a character error problem in firefox. How can I solve.

    Hello haruntt, please be a little more specific about the issue. In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
    Thank you!

  • Help! I am getting: Quicktime error -50...when trying to use the "Share" and "Send to Compressor" function. I need to export my show! Thanks for your suggestions! (using FCP7)

    Help!  I am trying to export my show and commercials from the timeline. Both Share and Send to compressor are not working.
    Its starts compressing then I get Failed"Quicktime Error -50". I appreciate any suggestions.
    SYSTEM INFO
    Model Name:          Mac Pro
      Model Identifier:          MacPro5,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          2.4 GHz
      Number Of Processors:          2
      Total Number Of Cores:          8
      L2 Cache (per core):          256 KB
      L3 Cache (per processor):          12 MB
      Memory:          10 GB
      Processor Interconnect Speed:          5.86 GT/s
      Boot ROM Version:          MP51.007F.B00
      SMC Version (system):          1.39f11
      SMC Version (processor tray):          1.39f11

    First try exporting a self-contained movie from FCP, the using the resulting file in Compressor.  To do it, go to File->Export->QuickTime Movie (do NOT use QuickTime Conversion).  In the export window, check the self-contained option but do not "recompress all frames."
    Once the export is finished, launch Compressor then use the self-contained file as the source.  If that fails, you may want to try using theis: http://www.digitalrebellion.com/compressorrepair/
    -DH

  • Compressor 2 - Quicktime error 0 revealed

    After upgrading to the latest version of QT, FCP5, DVDSP4, and Compressor 2 with all the latest fixes I could not compress a 1 hr 46 min video on my quad G5 without getting the dreaded quicktime 0 error message. I spent days trying to get around this and finally settled on getting the job done through DVDSP, (see my post "compressor 2 what works for me").
    I finally decided to track down the problem by spliting my project in half to see which half was failing. Then I spilt that half in two and so on for hours until I found the problem video. Turns out I had a "spin 3D" transition between a slow motion clip at 50% and a clip at regular speed. I added 1 sec of regular speed to the slo mo clip so the transition would fall between to clips at regular speed and the problem was solved. My 1hr 46 min video compressed in 3hrs 30 min. (still not as quick as the 1 hr 10 min from DVDSP4 but thats another story).
    Conclusion - "Quicktime error 0" seems to be Compressors way of saying "sorry this is too complex for me." I am sure there are other combinations of transitions, filters, etc. that will cause this problem as well so APPLE, IF YOU ARE READING THIS we need a fix.
    I will try more expirements but complexity in the time line seems to be the cause of compressors failure due to quicktime error 0.

    I am having the same issue. I have recently purchased quicktime pro and updated to lion, I dont know if that is that causes the failure but this *****! it's the 4rth time i try to compress a 15 minute file, it takes about 3 hours and when there is 10 minutes to go.... pooooof!!! game over!

  • Compressor 2.3 - Quicktime error:0

    HI All
    This morning I wake up with this new thing.
    Im using FCP 5.1.1 and a 15minutes DV Pal sequence, already converted in the past. This morning I've tried to re-encode the sequence using DVD 90 min. High quality and I've got this new message : Quicktime error:0
    According to Apple , this erro coul appear just in HD sequences with less 1Gb ram. In my case, I've got 1.5Gb RAM and a 720x576 PAL DVcam format.
    I've done just a small test. I've esported the sequence (using export/qt/) and compressor does his job! Any idea? What I could to re-export directly from FCp?Thanks in advance!
    Paul
    G5 MPP 2Gb   Mac OS X (10.4.10)   Panasonic P2 Camera and Fcp 5.1.1 - 1tera Discs

    I am going to attempt both of those options.   In the meantime, I made an H264 version of the file for Blu Ray using a Matrox setting.

Maybe you are looking for