Quicktime Error:0 with Compressor 4

Here's what I'm working on:
Mac Pro Quad-Core
16gb RAM
Mac OSX 10.7.5
I"m exporting from FCPX 10.0.7 to Compressor 4.  I have an 82 minute timeline.  When Compressor opens, I select the standard DVD presets for mpeg2 video and ac3 audio.  The audio file renders fine, but the video files fails and I get this error- "Failed: Quicktime Error: 0"  
When importing every source file, I have optimized media selected.  Any ideas whats causing this? 

Udate:  The contained Quicktime file that I exported from FCPX rendered fully with no errors in Compressor, so I guess I"m in the clear, but I think this was an unnecessary extra step.  Its a mystery why I was getting the error when sending the render to Compressor from within FCPX. 
Anyone else that has this issue, please share any solutions if you have them.

Similar Messages

  • Updated document about QuickTime errors with After Effects (re: H.264 and hyperthreading)

    I just updated "troubleshooting QuickTime errors with After Effects CS5, CS5.5, and CS6" with information about hyperthreading and Apple's H.264 encoder.
    The gist is that Apple's H.264 exporter component for QuickTime fails when the computer has a large number of CPUs.

    No, this applies to any QuickTime H.264 export. You can export H.264 in a QuickTime .mov wrapper out of AME, too, and it will have this problem.
    The various H.264 encoding presets (for YouTube, Blu-ray, Vimeo, iPad, etc.) don't use the H.264 QuickTime component, so this isn't relevant to them.
    This problem is just relevant to choosing Apple's H.264 as the video codec when choosing QuickTime as a format. This applies to all software that uses QuickTime, by the way, not just Adobe software.

  • Export QuickTime movie with Compressor running in background

    I've rummaged through the forums many times to figure out the absolute fastest way to get an FCP sequence compressed for DVD Studio Pro while maintaining the best quality. I always seem to come up with:
    Export QuickTime Movie (not self contained) --> Compressor (DVD best quality settings)
    This seems to work fine. I am currently exporting sequences in HDV 1080i60 and they take an extremely long time to export into QT movies. Because of that, I am editing a sequence, waiting for it to export, then dropping it into Compressor. At this point, FCP is available for editing again while Compressor is working, so I repeat the process. However, when I export to QT from FCP while Compressor is still running in the background it seems to take much longer to export.
    Here is my question:
    *Am I doing anything wrong by allowing Compressor to work while I am trying to export QT movies from FCP to the same drive?*
    Is FCP actually taking longer to export, or is that my imagination? Would it be faster if I only did one at a time, or should it take the same amount of time either way? Am I putting the data on my final movies at risk by doing these things at the same time?
    Any help would be appreciated as this is a time sensitive project. I am working in both FCP 5 and 6 on two different computers. 2.5 GHz Core 2 Duo, 4 GB.

    Compressor takes a lot of system resources. It will slow the computer down in other tasks.
    Because Compressor can run unattended, why not take advantage of that?
    Do your regular work that needs you to be there and run the Compressor Batch overnight or at other times when the system is idle.
    Compressor's default destination for its processed files is the same directory as the original -writing the files to a different drive might help, at least that way your media drive is not reading and writing at the same time.

  • Quicktime error with P2

    Since importing P2 footage into FCP, whereas it's created new .mov files in my capture scratch folder, I canot open the new HD .mov files with just quicktime. Any thoughts?

    Just found a work around. Disabling the Windows Firewall lets me install itunes 7.1.
    cfelix

  • Quicktime errors with .mov's captured in premiere. HELP!

    I captured video through Adobe Premiere CS3 to a FAT32 external. It stopped twice during capture before I changed it to capture to the computers internal HD. I went back to retrieve the files that had stopped during capture. and the .mov files cannot be opened by anything. VLC says "no moov box" and quicktime says it's a filetype that it cannot understand.
    i've captured countless times through premiere and this has never happend. is there a way to repair the files, convert them, etc? help please.
    -Chris

    Chris -
    You don't want to be capturing video to a FAT 32 drive in the Mac world. Your QT wrapper didn't make it all the way around the file - probably because of a 2gig limit.
    If you are going to continue using this drive for scratch video drive remove everything, reformat to MAC OS Extended and re load. Capturing to your internal system drive isn't the best either, as you know.
    Good luck,
    CaptM

  • Quicktime errors after effects cc2014

    i've been getting quicktime errors in after effects cc14, windows 8.1, update 1. when importing a quicktime file that opens and plays in vlc, and quicktime player, i'm getting the error "After Effects error: file 'xxx.mov" cannot be imported this .mov file is damaged or unsupported. i've uninstalled quicktime and reinstalled to no avail.

    Does AE CC work? (I mean, you're using version 13. Does version 12 work?)
    Have you tried the suggestions here: fixing permissions problem that impedes start of Adobe applications and here: troubleshooting QuickTime errors with After Effects ?

  • Quicktime error 0 with compressor

    Every time I try to export a sequence from FCP 5.0.2 using compressor I get an error when it tries to export the video saying "quicktime error 0" also when I try to export as a quicktime movie, I get a message saying "general error" im running compressor 2.0.1
    any help is greatly appreciated
    thanks
    ~jon

    Udate:  The contained Quicktime file that I exported from FCPX rendered fully with no errors in Compressor, so I guess I"m in the clear, but I think this was an unnecessary extra step.  Its a mystery why I was getting the error when sending the render to Compressor from within FCPX. 
    Anyone else that has this issue, please share any solutions if you have them.

  • Render Farm fails in compressor 3.5.3 with host failed quicktime error -36

    I have been having regular problems while render farming in Compressor 3.5.3 the Host computer is running OSX 10.8.5 and the other computers are running 10.8.4 and 10.7.5. after about compressor is about half way done. the job fails. I get this error
    Failed - HOST [mc-21-imac.local] QuickTime Error: -36
    The file being compressed is 1080 24p and is exported with the timeline settings then brought into compressor
    here is the log from the most recent batch.
    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <services>
       <service type="jobcontroller:com.apple.qmaster.cluster.admin" displayName="NCC’s iMac" address="tcp://127.0.0.1:49244" hostName="mc-27-thin-imac.local">
          <logs tms="405381920.683" tmt="11/05/2013 14:05:20.683" pnm="unknown">
             <log tms="405381920.683" tmt="11/05/2013 14:05:20.683" pid="290" kind="mrk" sub="error" what="get-log" avail="false" msg="Not logging to file."/>
          </logs>
       </service>
       <service type="requestprocessor:com.apple.qmaster.contentcontroller" displayName="NCC’s iMac" address="tcp://172.20.12.15:49302" hostName="mc-27-thin-imac.local">
          <logs tms="405381176.354" tmt="11/05/2013 13:52:56.354" pnm="ContentController">
             <mrk tms="405381177.690" tmt="11/05/2013 13:52:57.690" pid="324" kind="begin" what="service-request" req-id="1BBA659D-7474-481A-A70E-8CB5E633C8E5:1" msg="Preprocessing job."></mrk>
             <log tms="405381177.699" tmt="11/05/2013 13:52:57.699" pid="324" msg="Source file is local - we will try hard-linking."/>
             <log tms="405381177.700" tmt="11/05/2013 13:52:57.700" pid="324" msg="Hard-linked source file to cluster storage."/>
             <mrk tms="405381182.693" tmt="11/05/2013 13:53:02.693" pid="324" kind="end" what="service-request" req-id="1BBA659D-7474-481A-A70E-8CB5E633C8E5:1" msg="Preprocessing job request end."></mrk>
             <mrk tms="405381182.722" tmt="11/05/2013 13:53:02.722" pid="324" kind="begin" what="service-request" req-id="FDC914D3-4A0A-4431-948A-137D9A76AD03:1" msg="Preprocessing."></mrk>
             <mrk tms="405381187.725" tmt="11/05/2013 13:53:07.725" pid="324" kind="end" what="service-request" req-id="FDC914D3-4A0A-4431-948A-137D9A76AD03:1" msg="Preprocessing service request end."></mrk>
          </logs>
       </service>
       <service type="servicecontroller:com.apple.stomp.transcoder" displayName="mc-12-core" hostName="mc-12-core.local" managed="false" address="tcp://172.20.10.25:54056">
          <logs tms="405381194.382" tmt="11/05/2013 13:53:14.382" pnm="CompressorTranscoderX">
             <mrk tms="405381224.941" tmt="11/05/2013 13:53:44.941" pid="738" kind="begin" what="service-request" req-id="C10642AE-6B51-45BE-9235-8A5DDE3C1743:1" msg="Processing."></mrk>
             <mrk tms="405381224.942" tmt="11/05/2013 13:53:44.942" pid="738" kind="begin" what="CServiceControllerServer::mountClusterStorage"></mrk>
             <log tms="405381224.942" tmt="11/05/2013 13:53:44.942" pid="738" msg="Cluster storage URL = nfs://mc-27-thin-imac.local/private/var/spool/qmaster/87C75A89-72519530/shared" />
             <log tms="405381224.942" tmt="11/05/2013 13:53:44.942" pid="738" msg="Local subscribe path = /var/spool/qmaster/87C75A89-72519530/shared"/>
             <log tms="405381224.942" tmt="11/05/2013 13:53:44.942" pid="738" msg="Subscribing to shared storage."/>
             <mrk tms="405381224.957" tmt="11/05/2013 13:53:44.957" pid="738" kind="end" what="CServiceControllerServer::mountClusterStorage"></mrk>
             <mrk tms="405381224.957" tmt="11/05/2013 13:53:44.957" pid="738" kind="begin" what="CServiceControllerServer::checkRequiredFiles"></mrk>
             <log tms="405381224.958" tmt="11/05/2013 13:53:44.958" pid="738" msg="Source file /var/spool/qmaster/87C75A89-72519530/shared/Checklist-A9A8BE65-F4F2-4BB5-AA92-8 75CA53F8D9A.mov is directly accessible."/>
             <log tms="405381224.958" tmt="11/05/2013 13:53:44.958" pid="738" msg="Source file can be opened."/>
             <log tms="405381224.960" tmt="11/05/2013 13:53:44.960" pid="738" msg="Source file can be read."/>
             <mrk tms="405381224.961" tmt="11/05/2013 13:53:44.961" pid="738" kind="end" what="CServiceControllerServer::checkRequiredFiles"></mrk>
             <log tms="405381224.968" tmt="11/05/2013 13:53:44.968" pid="738" msg="starting _processRequest for job target: file://localhost/var/spool/qmaster/87C75A89-72519530/shared/Checklist-Vimeo%20H D-F12CF6CD-0DCA-41EB-9BD6-557B63EB3E41.mov-2"/>
             <log tms="405381224.968" tmt="11/05/2013 13:53:44.968" pid="738" msg="Writing transcode segment: file://localhost/var/spool/qmaster/87C75A89-72519530/shared/Checklist-Vimeo%20H D-F12CF6CD-0DCA-41EB-9BD6-557B63EB3E41.mov-2"/>
             <log tms="405381225.158" tmt="11/05/2013 13:53:45.158" pid="738" msg="QuickTime Transcode, rendering in YUV 8 bit 422"/>
             <mrk tms="405381275.202" tmt="11/05/2013 13:54:35.202" pid="738" what="service-request" req-id="C10642AE-6B51-45BE-9235-8A5DDE3C1743:1" msg="Cancelling."></mrk>
             <log tms="405381275.345" tmt="11/05/2013 13:54:35.345" pid="738" msg="QuickTime Transcode aborted by user: 50.1812 seconds.  status = 0"/>
             <log tms="405381275.348" tmt="11/05/2013 13:54:35.348" pid="738" msg="Done _processRequest for job target: file://localhost/var/spool/qmaster/87C75A89-72519530/shared/Checklist-Vimeo%20H D-F12CF6CD-0DCA-41EB-9BD6-557B63EB3E41.mov-2"/>
             <log tms="405381275.348" tmt="11/05/2013 13:54:35.348" pid="738" msg="Unsubscribing to shared storage: URL = nfs://mc-27-thin-imac.local/private/var/spool/qmaster/87C75A89-72519530/shared, local path = /var/spool/qmaster/87C75A89-72519530/shared"/>
             <mrk tms="405381279.982" tmt="11/05/2013 13:54:39.982" pid="738" kind="end" what="service-request" req-id="C10642AE-6B51-45BE-9235-8A5DDE3C1743:1" msg="Processing service request end."></mrk>
          </logs>
       </service>
       <service type="servicecontroller:com.apple.stomp.transcoder" displayName="NCC’s iMac" hostName="mc-27-thin-imac.local" managed="false" address="tcp://172.20.12.15:49168">
          <logs tms="405380926.271" tmt="11/05/2013 13:48:46.271" pnm="CompressorTranscoderX">
             <mrk tms="405381224.968" tmt="11/05/2013 13:53:44.968" pid="172" kind="begin" what="service-request" req-id="9796F993-EC7C-4BF4-98ED-5456258940CE:1" msg="Processing."></mrk>
             <mrk tms="405381224.969" tmt="11/05/2013 13:53:44.969" pid="172" kind="begin" what="CServiceControllerServer::mountClusterStorage"></mrk>
             <log tms="405381224.969" tmt="11/05/2013 13:53:44.969" pid="172" msg="Cluster storage URL = nfs://mc-27-thin-imac.local/private/var/spool/qmaster/87C75A89-72519530/shared" />
             <log tms="405381224.979" tmt="11/05/2013 13:53:44.979" pid="172" msg="Local subscribe path = /var/spool/qmaster/87C75A89-72519530/shared"/>
             <log tms="405381224.979" tmt="11/05/2013 13:53:44.979" pid="172" msg="Not subscribing, cluster storage is local and its path matches the local subscribe path."/>
             <mrk tms="405381224.979" tmt="11/05/2013 13:53:44.979" pid="172" kind="end" what="CServiceControllerServer::mountClusterStorage"></mrk>
             <mrk tms="405381224.979" tmt="11/05/2013 13:53:44.979" pid="172" kind="begin" what="CServiceControllerServer::checkRequiredFiles"></mrk>
             <log tms="405381224.979" tmt="11/05/2013 13:53:44.979" pid="172" msg="Source file /var/spool/qmaster/87C75A89-72519530/shared/Checklist-A9A8BE65-F4F2-4BB5-AA92-8 75CA53F8D9A.mov is directly accessible."/>
             <log tms="405381224.979" tmt="11/05/2013 13:53:44.979" pid="172" msg="Source file can be opened."/>
             <log tms="405381224.979" tmt="11/05/2013 13:53:44.979" pid="172" msg="Source file can be read."/>
             <mrk tms="405381224.979" tmt="11/05/2013 13:53:44.979" pid="172" kind="end" what="CServiceControllerServer::checkRequiredFiles"></mrk>
             <log tms="405381224.984" tmt="11/05/2013 13:53:44.984" pid="172" msg="starting _processRequest for job target: file://localhost/var/spool/qmaster/87C75A89-72519530/shared/Checklist-Vimeo%20H D-F12CF6CD-0DCA-41EB-9BD6-557B63EB3E41.mov-3"/>
             <log tms="405381224.985" tmt="11/05/2013 13:53:44.985" pid="172" msg="Writing transcode segment: file://localhost/var/spool/qmaster/87C75A89-72519530/shared/Checklist-Vimeo%20H D-F12CF6CD-0DCA-41EB-9BD6-557B63EB3E41.mov-3"/>
             <log tms="405381225.053" tmt="11/05/2013 13:53:45.053" pid="172" msg="QuickTime Transcode, rendering in YUV 8 bit 422"/>
             <mrk tms="405381275.178" tmt="11/05/2013 13:54:35.178" pid="172" what="service-request" req-id="9796F993-EC7C-4BF4-98ED-5456258940CE:1" msg="Cancelling."></mrk>
             <log tms="405381275.402" tmt="11/05/2013 13:54:35.402" pid="172" msg="QuickTime Transcode aborted by user: 50.3491 seconds.  status = 0"/>
             <log tms="405381275.404" tmt="11/05/2013 13:54:35.404" pid="172" msg="Done _processRequest for job target: file://localhost/var/spool/qmaster/87C75A89-72519530/shared/Checklist-Vimeo%20H D-F12CF6CD-0DCA-41EB-9BD6-557B63EB3E41.mov-3"/>
             <mrk tms="405381280.007" tmt="11/05/2013 13:54:40.007" pid="172" kind="end" what="service-request" req-id="9796F993-EC7C-4BF4-98ED-5456258940CE:1" msg="Processing service request end."></mrk>
          </logs>
       </service>
       <service type="servicecontroller:com.apple.stomp.transcoder" displayName="mc-27-imac" hostName="mc-27-imac-2.local" managed="false" address="tcp://172.20.10.8:49166">
          <logs tms="403310666.066" tmt="10/12/2013 15:44:26.066" pnm="CompressorTranscoderX">
             <mrk tms="405381297.306" tmt="11/05/2013 13:54:57.306" pid="122" kind="begin" what="service-request" req-id="FDC914D3-4A0A-4431-948A-137D9A76AD03:7" msg="Preprocessing."></mrk>
             <mrk tms="405381297.306" tmt="11/05/2013 13:54:57.306" pid="122" kind="begin" what="CServiceControllerServer::mountClusterStorage"></mrk>
             <log tms="405381297.306" tmt="11/05/2013 13:54:57.306" pid="122" msg="Cluster storage URL = nfs://mc-27-thin-imac.local/private/var/spool/qmaster/87C75A89-72519530/shared" />
             <log tms="405381297.307" tmt="11/05/2013 13:54:57.307" pid="122" msg="Local subscribe path = /var/spool/qmaster/87C75A89-72519530/shared"/>
             <log tms="405381297.307" tmt="11/05/2013 13:54:57.307" pid="122" msg="Subscribing to shared storage."/>
             <mrk tms="405381297.322" tmt="11/05/2013 13:54:57.322" pid="122" kind="end" what="CServiceControllerServer::mountClusterStorage"></mrk>
             <mrk tms="405381297.322" tmt="11/05/2013 13:54:57.322" pid="122" kind="begin" what="CServiceControllerServer::checkRequiredFiles"></mrk>
             <log tms="405381297.323" tmt="11/05/2013 13:54:57.323" pid="122" msg="Source file /var/spool/qmaster/87C75A89-72519530/shared/Checklist-A9A8BE65-F4F2-4BB5-AA92-8 75CA53F8D9A.mov is directly accessible."/>
             <log tms="405381297.324" tmt="11/05/2013 13:54:57.324" pid="122" msg="Source file can be opened."/>
             <log tms="405381297.326" tmt="11/05/2013 13:54:57.326" pid="122" msg="Source file can be read."/>
             <mrk tms="405381297.326" tmt="11/05/2013 13:54:57.326" pid="122" kind="end" what="CServiceControllerServer::checkRequiredFiles"></mrk>
             <log tms="405381297.331" tmt="11/05/2013 13:54:57.331" pid="122" msg="preProcess for job target: file://localhost/Users/nccvideo/Desktop/Checklist-Vimeo%20HD.mov"/>
             <log tms="405381297.865" tmt="11/05/2013 13:54:57.865" pid="122" msg="done preProcess for job target: file://localhost/Users/nccvideo/Desktop/Checklist-Vimeo%20HD.mov"/>
             <log tms="405381297.891" tmt="11/05/2013 13:54:57.891" pid="122" msg="Unsubscribing to shared storage: URL = nfs://mc-27-thin-imac.local/private/var/spool/qmaster/87C75A89-72519530/shared, local path = /var/spool/qmaster/87C75A89-72519530/shared"/>
             <mrk tms="405381302.310" tmt="11/05/2013 13:55:02.310" pid="122" kind="end" what="service-request" req-id="FDC914D3-4A0A-4431-948A-137D9A76AD03:7" msg="Preprocessing service request end."></mrk>
             <mrk tms="405381302.505" tmt="11/05/2013 13:55:02.505" pid="122" kind="begin" what="service-request" req-id="B07BFEAB-40E3-4136-A4EC-027048E1E2DC:1" msg="Processing."></mrk>
             <mrk tms="405381302.506" tmt="11/05/2013 13:55:02.506" pid="122" kind="begin" what="CServiceControllerServer::mountClusterStorage"></mrk>
             <log tms="405381302.506" tmt="11/05/2013 13:55:02.506" pid="122" msg="Cluster storage URL = nfs://mc-27-thin-imac.local/private/var/spool/qmaster/87C75A89-72519530/shared" />
             <log tms="405381302.506" tmt="11/05/2013 13:55:02.506" pid="122" msg="Local subscribe path = /var/spool/qmaster/87C75A89-72519530/shared"/>
             <log tms="405381302.506" tmt="11/05/2013 13:55:02.506" pid="122" msg="Subscribing to shared storage."/>
             <mrk tms="405381302.519" tmt="11/05/2013 13:55:02.519" pid="122" kind="end" what="CServiceControllerServer::mountClusterStorage"></mrk>
             <mrk tms="405381302.519" tmt="11/05/2013 13:55:02.519" pid="122" kind="begin" what="CServiceControllerServer::checkRequiredFiles"></mrk>
             <log tms="405381302.520" tmt="11/05/2013 13:55:02.520" pid="122" msg="Source file /var/spool/qmaster/87C75A89-72519530/shared/Checklist-A9A8BE65-F4F2-4BB5-AA92-8 75CA53F8D9A.mov is directly accessible."/>
             <log tms="405381302.520" tmt="11/05/2013 13:55:02.520" pid="122" msg="Source file can be opened."/>
             <log tms="405381302.522" tmt="11/05/2013 13:55:02.522" pid="122" msg="Source file can be read."/>
             <mrk tms="405381302.522" tmt="11/05/2013 13:55:02.522" pid="122" kind="end" what="CServiceControllerServer::checkRequiredFiles"></mrk>
             <log tms="405381302.528" tmt="11/05/2013 13:55:02.528" pid="122" msg="starting _processRequest for job target: file://localhost/var/spool/qmaster/87C75A89-72519530/shared/Checklist-Vimeo%20H D-F12CF6CD-0DCA-41EB-9BD6-557B63EB3E41.mov-5"/>
             <log tms="405381302.528" tmt="11/05/2013 13:55:02.528" pid="122" msg="Writing transcode segment: file://localhost/var/spool/qmaster/87C75A89-72519530/shared/Checklist-Vimeo%20H D-F12CF6CD-0DCA-41EB-9BD6-557B63EB3E41.mov-5"/>
             <log tms="405381302.580" tmt="11/05/2013 13:55:02.580" pid="122" msg="QuickTime Transcode, rendering in YUV 8 bit 422"/>
             <mrk tms="405381352.679" tmt="11/05/2013 13:55:52.679" pid="122" what="service-request" req-id="B07BFEAB-40E3-4136-A4EC-027048E1E2DC:1" msg="Cancelling."></mrk>
             <log tms="405381352.776" tmt="11/05/2013 13:55:52.776" pid="122" msg="QuickTime Transcode aborted by user: 50.1935 seconds.  status = 0"/>
             <log tms="405381352.777" tmt="11/05/2013 13:55:52.777" pid="122" msg="Done _processRequest for job target: file://localhost/var/spool/qmaster/87C75A89-72519530/shared/Checklist-Vimeo%20H D-F12CF6CD-0DCA-41EB-9BD6-557B63EB3E41.mov-5"/>
             <log tms="405381352.777" tmt="11/05/2013 13:55:52.777" pid="122" msg="Unsubscribing to shared storage: URL = nfs://mc-27-thin-imac.local/private/var/spool/qmaster/87C75A89-72519530/shared, local path = /var/spool/qmaster/87C75A89-72519530/shared"/>
             <mrk tms="405381357.538" tmt="11/05/2013 13:55:57.538" pid="122" kind="end" what="service-request" req-id="B07BFEAB-40E3-4136-A4EC-027048E1E2DC:1" msg="Processing service request end."></mrk>
          </logs>
       </service>
       <service type="servicecontroller:com.apple.stomp.transcoder" displayName="NCC’s iMac" address="tcp://127.0.0.1:49243" hostName="mc-27-thin-imac.local">
          <logs tms="405381920.887" tmt="11/05/2013 14:05:20.887" pnm="CompressorTranscoder">
             <log tms="405381920.887" tmt="11/05/2013 14:05:20.887" pid="289" kind="mrk" sub="error" what="get-log" avail="false" msg="Not logging to file."/>
          </logs>
       </service>
       <service type="servicecontroller:com.apple.stomp.transcoder" displayName="mc-21-imac" hostName="mc-21-imac.local" managed="false" address="tcp://172.20.10.4:49160">
          <logs tms="403310199.775" tmt="10/12/2013 15:36:39.775" pnm="CompressorTranscoderX">
             <mrk tms="405381225.047" tmt="11/05/2013 13:53:45.047" pid="150" kind="begin" what="service-request" req-id="10FFCD5A-52B4-460C-B651-63414EE146EA:1" msg="Processing."></mrk>
             <mrk tms="405381225.072" tmt="11/05/2013 13:53:45.072" pid="150" kind="begin" what="CServiceControllerServer::mountClusterStorage"></mrk>
             <log tms="405381225.072" tmt="11/05/2013 13:53:45.072" pid="150" msg="Cluster storage URL = nfs://mc-27-thin-imac.local/private/var/spool/qmaster/87C75A89-72519530/shared" />
             <log tms="405381225.106" tmt="11/05/2013 13:53:45.106" pid="150" msg="Local subscribe path = /var/spool/qmaster/87C75A89-72519530/shared"/>
             <log tms="405381225.106" tmt="11/05/2013 13:53:45.106" pid="150" msg="Subscribing to shared storage."/>
             <mrk tms="405381225.390" tmt="11/05/2013 13:53:45.390" pid="150" kind="end" what="CServiceControllerServer::mountClusterStorage"></mrk>
             <mrk tms="405381225.390" tmt="11/05/2013 13:53:45.390" pid="150" kind="begin" what="CServiceControllerServer::checkRequiredFiles"></mrk>
             <log tms="405381225.392" tmt="11/05/2013 13:53:45.392" pid="150" msg="Source file /var/spool/qmaster/87C75A89-72519530/shared/Checklist-A9A8BE65-F4F2-4BB5-AA92-8 75CA53F8D9A.mov is directly accessible."/>
             <log tms="405381225.393" tmt="11/05/2013 13:53:45.393" pid="150" msg="Source file can be opened."/>
             <log tms="405381225.395" tmt="11/05/2013 13:53:45.395" pid="150" msg="Source file can be read."/>
             <mrk tms="405381225.395" tmt="11/05/2013 13:53:45.395" pid="150" kind="end" what="CServiceControllerServer::checkRequiredFiles"></mrk>
             <log tms="405381225.402" tmt="11/05/2013 13:53:45.402" pid="150" msg="starting _processRequest for job target: file://localhost/var/spool/qmaster/87C75A89-72519530/shared/Checklist-Vimeo%20H D-F12CF6CD-0DCA-41EB-9BD6-557B63EB3E41.mov-6"/>
             <log tms="405381225.402" tmt="11/05/2013 13:53:45.402" pid="150" msg="Writing transcode segment: file://localhost/var/spool/qmaster/87C75A89-72519530/shared/Checklist-Vimeo%20H D-F12CF6CD-0DCA-41EB-9BD6-557B63EB3E41.mov-6"/>
             <log tms="405381225.495" tmt="11/05/2013 13:53:45.495" pid="150" msg="QuickTime Transcode, rendering in YUV 8 bit 422"/>
             <log tms="405381270.026" tmt="11/05/2013 13:54:30.026" pid="150" msg="Time for QuickTime transcode: 44.5298 seconds.  status = -36"/>
             <log tms="405381270.028" tmt="11/05/2013 13:54:30.028" pid="150" msg="Done _processRequest for job target: file://localhost/var/spool/qmaster/87C75A89-72519530/shared/Checklist-Vimeo%20H D-F12CF6CD-0DCA-41EB-9BD6-557B63EB3E41.mov-6"/>
             <log tms="405381270.029" tmt="11/05/2013 13:54:30.029" pid="150" msg="Unsubscribing to shared storage: URL = nfs://mc-27-thin-imac.local/private/var/spool/qmaster/87C75A89-72519530/shared, local path = /var/spool/qmaster/87C75A89-72519530/shared"/>
             <mrk tms="405381275.107" tmt="11/05/2013 13:54:35.107" pid="150" kind="end" what="service-request" req-id="10FFCD5A-52B4-460C-B651-63414EE146EA:1" msg="Processing service request error: QuickTime Error: -36"></mrk>
             <mrk tms="405381275.162" tmt="11/05/2013 13:54:35.162" pid="150" kind="begin" what="service-request" req-id="A9E024F4-2FCB-4355-B7AD-C5A69764BD46:1" msg="Processing."></mrk>
             <mrk tms="405381275.162" tmt="11/05/2013 13:54:35.162" pid="150" kind="begin" what="CServiceControllerServer::mountClusterStorage"></mrk>
             <log tms="405381275.162" tmt="11/05/2013 13:54:35.162" pid="150" msg="Cluster storage URL = nfs://mc-27-thin-imac.local/private/var/spool/qmaster/87C75A89-72519530/shared" />
             <log tms="405381275.163" tmt="11/05/2013 13:54:35.163" pid="150" msg="Local subscribe path = /var/spool/qmaster/87C75A89-72519530/shared"/>
             <log tms="405381275.163" tmt="11/05/2013 13:54:35.163" pid="150" msg="Subscribing to shared storage."/>
             <mrk tms="405381275.180" tmt="11/05/2013 13:54:35.180" pid="150" what="service-request" req-id="A9E024F4-2FCB-4355-B7AD-C5A69764BD46:1" msg="Cancelling."></mrk>
             <mrk tms="405381275.207" tmt="11/05/2013 13:54:35.207" pid="150" kind="end" what="CServiceControllerServer::mountClusterStorage"></mrk>
             <mrk tms="405381275.207" tmt="11/05/2013 13:54:35.207" pid="150" kind="begin" what="CServiceControllerServer::checkRequiredFiles"></mrk>
             <log tms="405381275.209" tmt="11/05/2013 13:54:35.209" pid="150" msg="Source file /var/spool/qmaster/87C75A89-72519530/shared/Checklist-A9A8BE65-F4F2-4BB5-AA92-8 75CA53F8D9A.mov is directly accessible."/>
             <log tms="405381275.214" tmt="11/05/2013 13:54:35.214" pid="150" msg="Source file can be opened."/>
             <log tms="405381275.220" tmt="11/05/2013 13:54:35.220" pid="150" msg="Source file can be read."/>
             <mrk tms="405381275.220" tmt="11/05/2013 13:54:35.220" pid="150" kind="end" what="CServiceControllerServer::checkRequiredFiles"></mrk>
             <log tms="405381275.227" tmt="11/05/2013 13:54:35.227" pid="150" msg="starting _processRequest for job target: file://localhost/var/spool/qmaster/87C75A89-72519530/shared/Checklist-Vimeo%20H D-F12CF6CD-0DCA-41EB-9BD6-557B63EB3E41.mov-7"/>
             <log tms="405381275.228" tmt="11/05/2013 13:54:35.228" pid="150" msg="Writing transcode segment: file://localhost/var/spool/qmaster/87C75A89-72519530/shared/Checklist-Vimeo%20H D-F12CF6CD-0DCA-41EB-9BD6-557B63EB3E41.mov-7"/>
             <log tms="405381275.774" tmt="11/05/2013 13:54:35.774" pid="150" msg="QuickTime Transcode, rendering in YUV 8 bit 422"/>
             <log tms="405381346.861" tmt="11/05/2013 13:55:46.861" pid="150" msg="Time for QuickTime transcode: 71.0861 seconds.  status = 0"/>
             <log tms="405381346.863" tmt="11/05/2013 13:55:46.863" pid="150" msg="Done _processRequest for job target: file://localhost/var/spool/qmaster/87C75A89-72519530/shared/Checklist-Vimeo%20H D-F12CF6CD-0DCA-41EB-9BD6-557B63EB3E41.mov-7"/>
             <log tms="405381346.863" tmt="11/05/2013 13:55:46.863" pid="150" msg="Unsubscribing to shared storage: URL = nfs://mc-27-thin-imac.local/private/var/spool/qmaster/87C75A89-72519530/shared, local path = /var/spool/qmaster/87C75A89-72519530/shared"/>
             <mrk tms="405381350.222" tmt="11/05/2013 13:55:50.222" pid="150" kind="end" what="service-request" req-id="A9E024F4-2FCB-4355-B7AD-C5A69764BD46:1" msg="Processing service request end."></mrk>
          </logs>
       </service>
    </services>

    digital rebellion has a crash analyzer that's part of Pro Maintenance Tools
    http://www.digitalrebellion.com/promaintenance/
    There's a free trial, but it's worth every penny.

  • Compressor 2 - Quicktime error 0 revealed

    After upgrading to the latest version of QT, FCP5, DVDSP4, and Compressor 2 with all the latest fixes I could not compress a 1 hr 46 min video on my quad G5 without getting the dreaded quicktime 0 error message. I spent days trying to get around this and finally settled on getting the job done through DVDSP, (see my post "compressor 2 what works for me").
    I finally decided to track down the problem by spliting my project in half to see which half was failing. Then I spilt that half in two and so on for hours until I found the problem video. Turns out I had a "spin 3D" transition between a slow motion clip at 50% and a clip at regular speed. I added 1 sec of regular speed to the slo mo clip so the transition would fall between to clips at regular speed and the problem was solved. My 1hr 46 min video compressed in 3hrs 30 min. (still not as quick as the 1 hr 10 min from DVDSP4 but thats another story).
    Conclusion - "Quicktime error 0" seems to be Compressors way of saying "sorry this is too complex for me." I am sure there are other combinations of transitions, filters, etc. that will cause this problem as well so APPLE, IF YOU ARE READING THIS we need a fix.
    I will try more expirements but complexity in the time line seems to be the cause of compressors failure due to quicktime error 0.

    I am having the same issue. I have recently purchased quicktime pro and updated to lion, I dont know if that is that causes the failure but this *****! it's the 4rth time i try to compress a 15 minute file, it takes about 3 hours and when there is 10 minutes to go.... pooooof!!! game over!

  • Compressor 2.3 - Quicktime error:0

    HI All
    This morning I wake up with this new thing.
    Im using FCP 5.1.1 and a 15minutes DV Pal sequence, already converted in the past. This morning I've tried to re-encode the sequence using DVD 90 min. High quality and I've got this new message : Quicktime error:0
    According to Apple , this erro coul appear just in HD sequences with less 1Gb ram. In my case, I've got 1.5Gb RAM and a 720x576 PAL DVcam format.
    I've done just a small test. I've esported the sequence (using export/qt/) and compressor does his job! Any idea? What I could to re-export directly from FCp?Thanks in advance!
    Paul
    G5 MPP 2Gb   Mac OS X (10.4.10)   Panasonic P2 Camera and Fcp 5.1.1 - 1tera Discs

    I am going to attempt both of those options.   In the meantime, I made an H264 version of the file for Blu Ray using a Matrox setting.

  • Compressor Job Fail Quicktime Error -120

    The program quits before it even starts compressing after I click "Submit"  There is no error message or any indication of why the attempt failed.  Except a grey message to the side that says QuickTime Error -120
    I'm using the presets.  Trying to convert a QT movie (Current Settings) to a YouTube file.
    Still using Compressor 3.5.3
    OS 10.5.8
    I trashed the prefs and started over, but the same error continues to occur.
    It's odd, this is the first time it's happening.  I'm taking following the same steps I've always taken.

    OK.. just now out of curiosity I went back into my prefs.
    Deleted 2 Quicktime P.Lists
    Deleted Compressor P.List again
    And just for the heck of it deleted my Final Cut User Data and Final Cut P.List
    Instead of putting the word YouTube in the file name for either name, I took that out.
    Clicked Submit and renamed the file once.. then the second drop down asked me to rename and I named it a different name with no spaces.
    Now it's processing fine.
    Not sure what I did, but something worked. 

  • Compressor quicktime error -50

    i have an fcp project i need to convert to mpeg 4 improved for fast cable streaming. after completing my upgrades of fcp 4.5 and compressor 1.2.1 and fixing the QMaster the file got to the batch monitor. after a second of processing it quit. history says failed: quicktime error-50. any ideas for a fix?

    If I may just chime in here with my experience with QT error -50, this seems to be a bug, which I have reported to the FCP development team. There is also another error that compressors batch monitor also reports which is Quicktime error -6662.
    These error seem to be quite prevalent on the Intel Mac Pros, but on my G5/quad these errors rarely occur. I have tested the same source files on both workstations, (Mac Pro and G5/quad) and the errors are just about exclusive to the intel's. Once in a blue moon I will get a quicktime error -50, preventing the encode to complete on the G5/quad.
    The preliminary opinion of Apple support was that the errors may be related to writing to any drive other than the boot drive, but seems to be a guess at this point, rather than fact. My testing of this hypotheses seems to disprove this assumption, being that I used the boot drive in my test as the destination drive, for encodes.
    Still waiting for Apple to address this problem.

  • Quicktime error -2045. I can't use compressor! someone can help me?

    When I try to send any video with compressor, never starts. Always appear this message: Quicktime error -2045. I have looked on internet and didn't find anything about that. Someone can help me? what I'm doing wrong?
    thanks, Noelia

    What version of Compressor? Are you sending fom FCP X or another version of Final Cut?
    I don't know the implications of getting that particular error code.
    Russ

  • Quicktime error -50 with "H.264 for DSP"

    Hello.
    When compressing for HD DVD with the profile "H.264 for DVD Studio Pro" (on macosx 10.5.5, QuickTime 7.5.5) I systematically get a QuickTime error -50, about which I am finding no information at all. More, precisely this is what the logs report
    (in com.apple.stomp.transcoder.stomp.log)
    ... msg="Processing service request error: QuickTime Error: -50"
    (in com.apple.compressor.cluster.admin.log)
    <log ... msg="Handling exception: ... fatal exception = QuickTime error: -50, fail count = 1." />
    <log ... msg="Stopping the failed request." />
    This happens with all kind of sources, but only when the setting is "H.264 for DVD Studio Pro". All other settings work as expected. I don't know what to think, possibly an upgrade problem, possibly one of the QuickTime plugins installed on my system might be interfering (but then perhaps the error should occur given a source for all output settings, rather than vice versa, fixed the DSP setting for sources of all kinds). Google doesn't seem to know about this, searching this mailing list hasn't helped, nor grep-ing my system for more expressive error reports.
    In way of help, can please anybody:
    (1) confirm that they are able with Compressor 3.0.4 to produce H.264 for DSP
    (2) shed some light on what this QuickTime Error: -50 might be, perhaps by pointing me to log files where some more information is given? (fatal exception -50 is not very helpful, really...)
    My interest is of course to learn how to bypass the problem, or alternatively to convince DSP to accept H.264 in HD DVD projects generated by encoders others than Compressor with "H.264 for DSP" profile, or alternatively to understand how to make DSP accept H.264 generated by a third-party encoder (eg x264). Does anybody know?
    thanks

    Hi:
    I've been experiencing all sorts of issues with compressor, somewhat like this. I think my quicktime plug-ins are the culprit. Example, I have been exporting directly out of Motion with no problems lately, but when I export to Compressor I see my "Flip4Mac" import window several times, then Compressor either fails to export, or crashes.
    I would suggest trying a direct export from FCP or Motion, or whatever your source is. See if that works. Just bypass Compressor and choose your HD DVD option from the export window. It does the trick with Motion.

  • Compressor error "QuickTime Error 0"

    I am trying to compress a 7 min. video using Final Cut Studio outputting directly to compressor, after about 45 min. of compressing I get the error message "Failure Quicktime Error 0"
    Settings: 2 pass VBR 6.7 - 7.2, 16 x 9
    This movie does have alot of transitions, effects etc.
    I am able to compress a Sorenson version for review.
    Any guidence would be greatly appreciated.
    Thank you,
    James

    ...Some more info on this topic.
    I tried the same process on another G5 and got the same error so I don't think it's a machine specific related problem. I also tried rendering the video via Quicktime export uncompressed and got the error: FXScript Divide by 0. Now I think it must be one of my effects or several that is causing the problem.
    I am going to go back to previous versions of the project and see if I can render, then perhaps I can isolate the problem. I'll let you all know if I solve it. I have searched the threads and google but have only found more people with the problem and no solutions.
    Thanks,
    James

Maybe you are looking for