QuickTime Error:-23 in compressor when I try to render any sequence

QuickTime Error:-23
I have been getting this error in Compressor when I try to render out of FCP and have tried reinstalling FCP and Compressor and then QuickTime 7.6.4. Has anyone ever seen this.
I am running OS 10.5.8 FCP 6.0.6 and QuickTime 7.6.4
Thanks in advance

Ok I am going to answer my own question.
I just uninstalled the matrox mxo2 software to run the device. Now I can render out of compressor. I guess I have to find a way to run both. I have to go to matrox and get find out how to get this to work.

Similar Messages

Why does FCP error "File Not Found" when I try to open my sequences????

I recently updated all of my software and the following day I started getting errors "file not found" when I would try to open a sequence. Now all of my sequences are being lost and I am losing time and money because I can't meet deadlines! This *****!!! With one sequence I had to reedit the entire thing from scratch and when I did for some reason the old one would then open. But the next time I opened FCP both sequences would error out. Following the "file not found" the computer responds with another error "error: out of memory" What the devil is going on with this crap?

I seem to have figured out what my problem was. After trying to build the same project (that failed on the Mac Pro) on my laptop and encountering the same errors, I realized that the problem had to be with one or more of my assets and not my new version of FCP, since my PowerBook is running FCP 5.0.4 and my Mac Pro is running FCP 5.1.2.
In my case the "corrupt" file was a Photoshop PSD file. In the past (FCP 4.5) I was able to use PSD files with hidden layers. I would merge the visible layers into one layer, keep the hidden layers and save the file. Once in FCP, I imported the PSD file and kept right on truckin'. I've done this for years. For some reason now with FCP 5.1.2 (and 5.0.4), that's not flying anymore. Once I "Flattened" the PSD file in Photoshop (deleting all of the hidden layers) I was able to build the project without any errors.
Interestingly, the technique I used to figure out which file was "corrupt" also allowed me to salvage parts of some of my "lost" sequences. I saw this posted in a forum at Creative Cow (creativecow.net). Basically, I opened up the project, clicked the OK button after the File Not Found error, went into the Browser, right clicked on the offending sequence, selected "Make Offline". When I double clicked the sequence it opened in the timeline with all of my assets offline. Then in the timeline, one by one, I right clicked on each clip and selected "Reconnect Media". Once I linked up the media, if I didn't get an error message, I would save as a new project (to salvage what WAS working), and go to the next clip. I did this until I found the offending PSD files.
I hope this helps. Now it's time to play "catch-up"
Mac Pro 3Ghz, 1GB RAM, ATI Radeon X1900 XT Mac OS X (10.4.8)

Help!! Error message: "File Exists" when I try to render the project

It is rendering one of my menus, it has a video background. It gets to the very last frame and then the thing pops up and says "File Exists" And I can only press OK, and when I do the rendering stops. What is wrong?? I need this to work by today please help!!

I have the same problem. Although, after I delete it I still can't render the menu. It shows that its rendering and when it reaches 100% it goes back about 5% (to about 95% complete) and starts moving towards 100% again, then back and forth endlessly.
When I hit cancel I see that it puts files in the project Sources\Menus folder... but when I preview still no motion video and when I try to re-render, I get the error message that "File Exists" all over again.
Any ideas?

I keep getting an error on my MAC when i try to open any and all JPG FILES. How do I correct Adobe Reader could not open 'images rest 12-4.jpg' because it is either not a supported file type or because the file has been damaged (for example, it was sent

Adobe Reader could not open 'images rest 12-4.jpg' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded).
that is the message how do i correct this problem

It sounds like your file associations are messed up and Reader is trying to open your .jpg files. Is this correct?
If so, you just need to change the associations to choose what application opens them. Here's how: Change File Associations in Mac OS X

New computer win 8.1 pro, installed my creative Suite 4 Design premium but it shuts down when I try to use any of the programs and gives me an error code 147:20. How can I fix this?

New computer win 8.1 pro, installed my creative Suite 4 Design premium but it shuts down when I try to use any of the programs and gives me an error code 147:20. How can I fix this? Is this a conflict with win 8.1 pro?

You need to adjust your security stuff/ permissions and possibly use compatibility modes. It means that your licensing service is being blocked/ shut down.
Mylenium

When I try to execute any workflow I get the error "Something went wrong.."

Hello,
Last weekend I updated the servers farm and I executed "SharePoint 2013 products configuration wizard" But I had an error and the wizard showed this: Conpleted configuration settings will not be rolled back.
From this moment when I try to execute any workflow in one of my site collections I always get the error "something went wrong.." Then I was checking the logs and I saw this:
04/08/2015 08:12:18.82 w3wp.exe (0x1318)                       0x2070 SharePoint Foundation
General                       8nca Medium Application error when access /_layouts/15/IniWrkflIP.aspx, Error=Requested
registry access is not allowed.   at Microsoft.Win32.RegistryKey.OpenSubKey(String name, Boolean writable)     at Microsoft.Win32.Registry.GetValue(String keyName, String valueName, Object defaultValue)
at Microsoft.Office.InfoPath.Server.Util.UrlManager.<>c__DisplayClass1.<OpenFileNameMap>b__0()     at Microsoft.Office.Server.Security.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)     at Microsoft.Office.InfoPath.Server.Util.UrlManager.OpenFileNameMap()
at Microsoft.Office.InfoPath.Server.Util.UrlManager..cctor() 539dfa9c-f4fc-b08b-bdb7-dca4cb91a7b5
04/08/2015 08:12:18.82 w3wp.exe (0x1318)                       0x2070 SharePoint Foundation
Runtime                       6616 Critical Requested registry access is not allowed. 539dfa9c-f4fc-b08b-bdb7-dca4cb91a7b5
04/08/2015 08:12:18.82 w3wp.exe (0x1318)                       0x2070 SharePoint Foundation
General                       ajlz0 High    Getting Error Message for Exception System.TypeInitializationException:
The type initializer for 'Microsoft.Office.InfoPath.Server.Util.UrlManager' threw an exception. ---> System.Security.SecurityException: Requested registry access is not allowed.     at Microsoft.Win32.RegistryKey.OpenSubKey(String name,
Boolean writable)     at Microsoft.Win32.Registry.GetValue(String keyName, String valueName, Object defaultValue)     at Microsoft.Office.InfoPath.Server.Util.UrlManager.<>c__DisplayClass1.<OpenFileNameMap>b__0()
at Microsoft.Office.Server.Security.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)     at Microsoft.Office.InfoPath.Server.Util.UrlManager.OpenFileNameMap()     at Microsoft.Office.InfoPath.Server.Util.UrlManager..cctor()
--- End of inner exception stack tra... 539dfa9c-f4fc-b08b-bdb7-dca4cb91a7b5
04/08/2015 08:12:18.82* w3wp.exe (0x1318)                       0x2070 SharePoint Foundation
General                       ajlz0 High    ...ce ---     at Microsoft.Office.InfoPath.Server.Util.UrlManager.GetConverterGeneratedFilePath(ConverterGeneratedFile
file, Document document)     at Microsoft.Office.InfoPath.Server.SolutionLifetime.ScriptIncludes.RenderCssLinksToHeader(Control ctrl, Document document, Boolean ribbonEnabled, Boolean isDisplayMode)     at Microsoft.Office.InfoPath.Server.Controls.XmlFormView.TryToAddCssLinksToHeader()
at Microsoft.Office.InfoPath.Server.Controls.XmlFormView.OnDataBindHelper()     at Microsoft.Office.InfoPath.Server.Controls.XmlFormView.OnDataBinding(EventArgs e)     at System.Web.UI.WebControls.WebParts.Part.DataBind()
at System.Web.UI.Control.DataBindChildren()     at System.Web.UI.Control.DataBind(Boolean raiseOnDataBinding)     at System.Web.UI.Control.DataBindChildren()     at Sy... 539dfa9c-f4fc-b08b-bdb7-dca4cb91a7b5
04/08/2015 08:12:18.82* w3wp.exe (0x1318)                       0x2070 SharePoint Foundation
General                       ajlz0 High    ...stem.Web.UI.Control.DataBind(Boolean raiseOnDataBinding)
at System.Web.UI.Control.DataBindChildren()     at System.Web.UI.Control.DataBind(Boolean raiseOnDataBinding)     at System.Web.UI.Control.DataBindChildren()     at System.Web.UI.Control.DataBind(Boolean
raiseOnDataBinding)     at System.Web.UI.Control.DataBindChildren()     at System.Web.UI.Control.DataBind(Boolean raiseOnDataBinding)     at System.Web.UI.Control.DataBindChildren()
at System.Web.UI.Control.DataBind(Boolean raiseOnDataBinding)     at Microsoft.Office.Workflow.IniWrkflIPPage.LoadFromWorkflowAssociation()     at Microsoft.Office.Workflow.IniWrkflIPPage.OnLoad(EventArgs ea)
at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean inc... 539dfa9c-f4fc-b08b-bdb7-dca4cb91a7b5
04/08/2015 08:12:18.82* w3wp.exe (0x1318)                       0x2070 SharePoint Foundation
General                       ajlz0 High    ...ludeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)     at System.Web.UI.Page.ProcessRequest()     at System.Web.UI.Page.ProcessRequest(HttpContext context)     at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) 539dfa9c-f4fc-b08b-bdb7-dca4cb91a7b5
But I cannot find any solution.
Please Help!

Hello,
After some troubleshooting finally I opened a case to Microsoft, finally we solved the error:
I cleared the configuration cache:
http://blogs.msdn.com/b/jamesway/archive/2011/05/23/sharepoint-2010-clearing-the-configuration-cache.aspx
With this I could execute the wizard without any problem and the problem was solved.
But if with this the problem is not fix, Apart from that, you can check this:
Apparently, Microsoft change the number version of the SP1, then if you have the first sp1 versión, you will have problems with the wizard because is looking for the newer version.
The first SP1 number version was:
15.0.4569.1506
The currently SP1 version is:
15.0.4571.1502
You can check your versión with this script:
http://blogs.technet.com/b/stefan_gossner/archive/2015/04/20/powershell-script-to-display-version-info-for-sharepoint-product-and-language-packs.aspx
Finally if you have the first version the solution is download SP1 again (newer) and install it again (it is not necessary unistall the currently SP1) When you finish, try to execute wizard again and everything will work fine.
Hope this helps!

I'm getting an error Out of memory message when I try to render - There's lots of memory

I'm getting an error Out of memory message when I try to render - there's lots of memory and I've never gotten this before - any ideas?

Thanks - I did go through and change all the profiles to Apple RGB, there are several to choose - but I'm still having problems - I think it has to do with corrupt images - Im backing up and starting over - I've worked with images large and small for years and never had this problem - thanks

I keep getting "Error Subject token invalid" when I try to activate HBO GO on my Apple TV 3.

I keep getting "Error Subject token invalid" when I try to activate HBO GO on my Apple TV 3. Everything else is activating fine. My ISP is XFinity. Anyone seen this? I have done a complete reset and restore, and have the latest software.

Hello dprice3885,
Thanks for using Apple Support Communities.
Take a look at the Wi-Fi troubleshooting since you can access the network but not the content.
Apple TV: Basic troubleshooting
http://support.apple.com/kb/HT6106
Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS4546
Have a nice day,
Mario

ANY ONE KNOW WHAT IS ERROR 3 IN ITUNES WHEN I TRY TO RESTORE

Please help ,what is (UNKOWN ERROR 3) in itunes when i try to restore ipad 3 to ios7 please help >
Does someone know how to fix it?

I am also facing the same issue.
four days back, my power buttton stopped working.
Then my sim card slot stopped reading like it was stuck at gsm/cdma band.
Even without simcard it said searching..
then I changed the power button and antenna strip myself as my iphone5 is uk ee and i live in india.
Everything was fine and I booted the phone.
The power button worked like a new device... but the searching problem still remained.
I hard resetted my phone but to no vail. even Find My phone was not turning off.
then I forced my phone to recovery mode and downloaded iphone5,2 7.0.2,11A501_restore.ipsw from web and flashed it.
At the start it recognised and everything was good until the "restoring iphone firmware" was stuck at the end point.
I tried every trick on net. Even tried to downgrade.. but it was blocked.
at the last it is either stuck at firmware or itunes unknown error (3)
Please somebody help me to recover this PAPERWEIGHT to a phone again...

Error 2615 - and -50 when i try to back up playlist

i either get error 2615 or -50 when i try to make back up discs- any help out there plz!!!! I have gone thru a stack of dvd-rs!!!!!!

Welcome to the Apple Community.
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.

Error when I try to render

Hello,
I just downloaded a template on the internet and I want to render it now, But when i try to render it I get the error:
2 footage files required to render composition "Template by IntroArtZ" are missing.
How can I fix this?

Do you know the difference between normal type and ITALIC type? Find the italic type! Those are the missing files! Now, where are they? How should I know? It's your machine, not mine! I don't know where you stored the files!
But here's how you reconnect the file: you double-click on a missing file in the AE project window, navigate to the folder where the missing file is located, and double-click on the file to signify that you found it. If the other missing files are in the same folder, AE will find them, too.

Error messages when i try to render

i have after effects on windows xp and when i try to render it i either get the message "the directory originally specified in the selected output no longer exists" or it gives a message that says access denied. i have tried changing the drive im saving it to as well as the name with no result. Any suggestions?

Please provide more info where you are actually trying to save (System directories?), what type of disks (SATA, Firewire, internal, external) and that sort of thing. Please also provide info about the operating system and file formats. Most commonly this error occurs with network drives that disconnect or loose their authentication info or external drives that go into idle mode after a while for energy saving, but without exact specs it's impossible to guess what's going on. Could also be any number of permission issues or combinations of the various conditions.
Mylenium

Keep getting "There was an error downloading this product" when I try to download updates to Adobe Photoshop CS5?

Keep getting "There was an error downloading this product" when I try to download updates to Adobe Photoshop CS5? Uninstalled and re-installed program but still won't download updates? I have a Mac Book OS X Version 10.9.5.

If you're trying to update through the Help menu > Updates, you should know that the Adobe auto updater in CS5 and earlier versions is an unmitigated, monumental piece of cr@p. It Is totally unreliably and fails in one or another of a great variety of ways.
Adobe began to get their act together as of CS6, with which I'm staying for exactly the same reason you are staying with CS5.
One has to update manually, by looking for, downloading and applying any and all applicable updates, including the Adobe Camera Raw plug-in which comes separately.
If the latter is what you've been doing, you need to let us know where you are trying to download the update from, what browser you are using to attempt to effect the download, and what platform you are in.
You also need to disable any and all virus protection, and make sure you are not behind any active software or hardware Fire Wall.
This is the URL for Photoshop Macintosh updates:
Adobe - Photoshop : For Macintosh
and for Windows:
Adobe - Photoshop : For Windows
Next time, please be substantially more informative, rather than plaintive or narrative (see next post). You are not addressing Adobe here.
Thank you.

Acrobat Pro is now constantly giving me the error message (program not responding) when I try and perform any kind of action.

Acrobat Pro is now constantly giving me the error message (program not responding) when I try and perform any kind of action.

Hi cruzsanta03,
Can you please let us know the following:
- Operating System;
- Complete version of Acrobat installed;
- Experiencing this issue with a particular file or all PDF files;
- Experiencing this issue while performing a particular task or with any task;
- Files are saved on the local machine or on a share drive;
- Launch Acrobat in Safe Mode and then check the issue. Hold 'Shift' key and launch Acrobat, and then check the issue.

Error Code 0x80070035 shows when I try to Access Windows XP machine from Windows8/Windows7

Error Code 0x80070035 shows when I try to Access Windows XP machine from Windows8/Windows7. in my PC i m installed windows8 and used primary and secondary IP. Primary is used for Access my Domain/Internet and secondary IP is used for access my VPN and
there is no internet on VPN. VPN is only used for my Head Office Appication. After i give secondary IP to my windos8/windos7 PC the Active network status changed to private network and not able to acces windows XP machines. Please Advice...

Hi,
This error means that the Network path was not found. Was Windows XP locating in the same network as the secondary IP on Windows 8/7?
Please try the solution below. Use the IP address of the target computer, not the computer name.
1) Find out what the target computer's IP address is. It is desirable to give the target computer a static private IP address, for example, 192.168.1.10, so it does not change. Use the local windows help when sitting in front of the target computer
to do this if you don't know how.
2) When sitting in front of the Windows 7 computer you want to access the target computer from, open Windows Explorer and in the address bar type \\ followed by the target computer's static address, for example,\\192.168.1.10 and hit enter.
If the target computer uses username/password sharing, after a few seconds you will be prompted for credentials. Enter the same username and password employed to log on to the target computer when you are sitting in front of it.
The target computer will be added to the Windows 7 computer's Network list, appearing as an IP address instead of a computer name. Then you can access its shares just as if it were listed by name instead of by number.
Kate Li
TechNet Community Support

QuickTime Error:-23 in compressor when I try to render any sequence

Similar Messages

Maybe you are looking for