Quicktime Error during Install/when try to open Itunes says encounterederro

error....
any ideas,fixes?
Thanks

I have the same probelm and I think it's also from upgrading to the free 7.1 version of iTunes.

Similar Messages

  • Quicktime errors during install, uninstall, or run

    Quicktime errors during install, uninstall, or run. No error code. It just says it encountered an error and must exit.

    I located a previous response that satisfied my issue. Below is the process that allowed me to use quicktime.
    The "fatal error" in this context has (recently) been indicating trouble with old, misplaced QuickTime componentry lurking about in your system.
    (Whether or not the message is a symptom of that problem seems to depend on what version of old misplaced stuff is lurking and what version of QuickTime proper we're trying to install or uninstall ... but in recent times, there's been an uptick in fatal errors being caused by that.)
    So let's try investigating that possibility first.
    First we'll adjust some view settings on the PC.
    1. Open My Computer from the desktop or Start menu.
    2. In the Tools menu, click Folder Options.
    3. Click the View tab.
    4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
    5. Click OK.
    Now in "My Computer" open Local Disk C: (or whichever drive your operating system is installed on).
    Open the "Windows" folder.
    Open the "System32" folder.
    What files or folders can you see in there with QuickTime in the file or folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

  • I updated my itunes to 11 and found out my phone and ipod were not compatible. I uninstalled it and reinstalled 10.7 but now I get an error message when I try to open itunes saying "the file cannot be read because it was created by a newer verison"

    I updated my itunes to 11 and found out my phone and ipod were not compatible. I uninstalled it and reinstalled 10.7 but now I get an error message when I try to open itunes saying "the file cannot be read because it was created by a newer verison" What do I do?

    Thank you for clarify I'm supposed to read the ENTIRE article. I thought I was just supposed to read the title and magically everything will fix itself. I appreciate you taking the time to help me however I do not appreciate the caps and the way you have addressed the situation. If you are not going to kindly help people/make suggestions just don't try! And for the record my conclusions are not illogical, the iOS7 thing is on the website in small font (which I got by reading the ENTIRE thing) and you should really find a new hobby because your socialization skills need some help! That goes for you too Chris. Not everyone is a tech nerd

  • Error File missing when try to run iTunes on windows. No more info. Uninstalled following support instructions and reinstalled - same message while reinstalling.

    Error "File missing" when try to run iTunes on windows. No more info. Uninstalled following support instructions and reinstalled - same message while reinstalling.

    Hi there slklug43,
    You may find the troubleshooting steps in the article below helpful.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    -Griff W. 

  • "Send Error Report" Message When Trying to Open iTunes

    I've looked for two days to find a solution to this problem and tried everything I've come across. Nothing has worked so far, and every time I try to open iTunes I still get the "send error report". I know that that does nothing. I've un-installed and re-installed both Quicktime and iTunes and it doesn't work. I've tried to see if it will work on another account on the same computer but it doesn't work. What is the next step?
    Thanks!

    Good-O. Not seeing an error message there rules out another possible set of problems, so we're still making progress.
    Okay, we'll try swapping out your existing QuickTime one more time, taking a few extra explicit precautions along the way.
    First, download and save a fresh copy of the QuickTimeInstaller.exe to your hard drive. (Don't run the install on line and don't run the install just yet.) Get the installer that doesn't mention iTunes:
    http://www.apple.com/quicktime/download/
    Now head into your "Add or Remove Programs" control panel and uninstall QuickTime.
    Next we'll remove any leftover QuickTime program files and folders.
    Restart the PC.
    Open Local Disk C: or whichever drive your program files are installed on.
    Open the "Program Files" folder.
    Right-click the "QuickTime" folder (if it still exists) and select Delete.
    Go back into Local Disk C: or whichever drive your Operating System files are installed on.
    Open the "Windows" folder.
    Open the "system32" folder.
    Right-click on the QuickTime file (if it still exists) and select "Delete".
    Right-click on the QuickTimeVR file (if it still exists) and select "Delete".
    Empty your Recycle Bin and restart the PC again.
    After the PC restarts, do not open any applications. Disconnect from your network and/or the internet. Now disable all your security software (firewall, antivirus, antispyware).
    Now start the QuickTime install by doubleclicking on the QuickTimeInstaller.exe file you downloaded earlier.
    Reenable all security software prior to reconnecting to the internet and/or your network.
    Did that install seem to go through okay? If so, does QuickTime launch normally this time?
    Message was edited by: b noir

  • QuickTime Errors During Install

    Looking for help. I recently upgraded to iTunes 6 which included the QuickTime 7 upgrade. Can no longer use iTunes due to error messages during the install of QT7. Receiving the following Errors 1402: Could not find key: HKEYLOCALMACHINE\SOFTWARE\Microsoft\Windows\Current\Version\Unistall\QuickTime and 1603 Fatal error during installation.
    I've tried several of the fixes listed, but with no success any suggestion would be greatly appreciated.

    You don't say specifically what you've tried, but take a look at these web pages:
    Error 1406 or 1402 appears when you install iTunes or QuickTime for Windows
    InstallShield Error 1603: Fatal Error During Installation
    Perhaps those will help.

  • Getting Error Message When Try to Open iTunes

    I recently had to reinstall my Os now I am having some issues. I unlocked all the folders to access my archives but now I open iTunes. I even reinstalled (10.4.1) the application but I am still is getting this error message, "The folder “iTunes” is on a locked disk or you do not have write permissions for this folder."
    I do not know what to do. Please advise. Thx.

    Anyone???

  • Error message (-50) when trying to open iTunes 8

    Has anyone come across this error message when installing iTunes?
    Looks as though install ok - but the app will not open.
    "iTunes could not be opened. An unknown error (-50) occurred."

    Message numbers in the 13000 range are usually do to a problem with Genius. I have seen 2 totally different fixes posted here in the forums. edit - Sounds like you already tried method 1.
    *Method 1*
    Rename these files, or delete them
    iTunes Library Genius.itdb
    iTunes Library Extras.itdb
    Try opening iTunes again. And turn off Genius as fast as you can. You can turn it back on later, but first get iTunes running.
    *Method 2*
    Go to Control Panel > Add/Remove Programs
    Choose iTunes, press the Change button and then the repair button.
    Message was edited by: Katrina S.

  • Error message 13005 when trying to open iTunes

    Hi, my iTunes updated over the weekend and now will not open. I get the following error message.
    "The iTunes application could not be opened. An unkown error occurred (13005)."
    Have completly uninstalled iTunes and re installed. Have uninstalled and installed an older version of itunes. Tried moving my Library file to my desktop to re install it (but couldn't open itunes to re install it). Tried deleting all genius files etc.
    Followed every idea I've seen on the forum but to no avail! I run my library on a timecapsule.....saw something about a potential problem with a firm wear update but no solution....
    Anyone got any ideas?
    thanks

    Message numbers in the 13000 range are usually do to a problem with Genius. I have seen 2 totally different fixes posted here in the forums. edit - Sounds like you already tried method 1.
    *Method 1*
    Rename these files, or delete them
    iTunes Library Genius.itdb
    iTunes Library Extras.itdb
    Try opening iTunes again. And turn off Genius as fast as you can. You can turn it back on later, but first get iTunes running.
    *Method 2*
    Go to Control Panel > Add/Remove Programs
    Choose iTunes, press the Change button and then the repair button.
    Message was edited by: Katrina S.

  • Get error 7 message when trying to open iTunes in windows vista

    All of a studded my windows vista 64 bit computer will not open iTunes. It has a error 7 message. I have tried removing it according to supports instructions with no luck. One problem that I had is that it told you to delete the iTunes folder in the common files and it would not let me do that but everything else deleted.still no luck when I reinstalled, any help would be appreciated. I also tried updating the net framework, no luck.
    Thanks in advance,
    Karlluch

    Karlluch...
    Try here >  iTunes for Windows: "Error 7" message when opening iTunes

  • I get an error message everytime i try to open itunes.

    And the meassage reads "The Itunes Library.itl file is locked, on a locked disk, or you do not whave write permission for the file."  what does this mean and how do i fix it? I have uninstalled and then reinstalled and the problem remains.

    This means that your iTunes library file (*.itl) which is found within your iTunes folder on your PC is being used by another program.
    Make sure to restart PC, and close any non-essential program/process running in the background via Windows Task Manager. Then try to run iTunes again.

  • STO mail : pdf attachment has an error 'file damage' when try to open it

    Dear expert,
    I need to send an e-mail to the vendor with the sto list as attachment at the email.
    I managed to send email to external addresee and made the pdf attachment, BUT somehow when I open the attachment it has an error says "Adobe Reader could not open xx.pdf because it is either not a supported file type or because the file has been damaged(for axample, it was sent as an email attachment and wasn't corectly decoded)."
    Really need your experties to help me. Here is my abap coding to send email and do the pdf attachment at the new ouptput type to send email.
      TYPES: BEGIN OF lty_drad,
              doknr TYPE drad-doknr,
             END OF lty_drad,
             BEGIN OF lty_recpt,
               smtp_addr  TYPE ad_smtpadr,
             END   OF lty_recpt.
      DATA: lt_doc      TYPE STANDARD TABLE OF docs,
            lt_recpt    TYPE STANDARD TABLE OF lty_recpt,
            lt_tline    LIKE tline OCCURS 0 WITH HEADER LINE,
            lt_data     TYPE solix_tab,
            lt_docu     TYPE STANDARD TABLE OF lty_drad,
            lt_docfiles TYPE STANDARD TABLE OF bapi_doc_files2,
            lw_tline    LIKE LINE OF lt_tline,
            lw_docu     LIKE LINE OF lt_docu,
            lw_docfiles LIKE LINE OF lt_docfiles,
            lw_objdes   TYPE tnati-objdes,
            lt_text     TYPE bcsy_text,
            lw_recpt    TYPE adr6-smtp_addr,
            lw_adrnr    TYPE lfa1-adrnr,
            lw_object   TYPE drad-objky,
            lw_doknr    TYPE drad-doknr,
            lw_return   TYPE  bapiret2,
            lw_xcontent TYPE xstring,
            client    TYPE REF TO if_http_client,
             url       TYPE string,
             lw_subrc  TYPE sysubrc,
             response  TYPE REF TO if_http_response,
             lw_message1 TYPE string,
           sent_to_all TYPE os_boolean,
           bin_filesize type i.
      CONSTANTS: lc_dokar_srm TYPE drad-dokar VALUE 'SRM',
                 lc_type      TYPE so_obj_tp  VALUE 'RAW'.
    CLASS-DEFINITIONS
      DATA: send_request       TYPE REF TO cl_bcs.
      DATA: document           TYPE REF TO cl_document_bcs.
      DATA: sender             TYPE REF TO cl_sapuser_bcs.
      DATA: recipient          TYPE REF TO if_recipient_bcs.
      DATA: exception_info     TYPE REF TO if_os_exception_info,
            bcs_exception      TYPE REF TO cx_bcs.
      RANGES: lr_po_pr   FOR  drad-objky.
      DATA:   lw_banfn   TYPE ekpo-banfn,
              lw_bnfpo   TYPE ekpo-bnfpo.
      IF nast-nacha = '5'. "8
    Create recipient and check if exist
       Get email ID
      start commented by sapnislina 21.12.06
       SELECT SINGLE adrnr FROM lfa1 INTO lw_adrnr
                    WHERE lifnr = p_ekko-lifnr.
       IF sy-subrc NE 0.
         PERFORM protocol_update
           USING '303' 'Address of Vendor:' ekko-lifnr 'not found' space
         p_retco = sy-subrc.
         EXIT.
       ENDIF.
      end commented by sapnislina 21.12.06
       SELECT smtp_addr INTO CORRESPONDING FIELDS OF TABLE lt_recpt
            FROM adr6
           WHERE addrnumber = p_ekko-adrnr. "lw_adrnr.
        IF lt_recpt[] IS INITIAL.
          PERFORM protocol_update
            USING '303' 'Email address(es) does not exist for vendor'
            p_ekko-lifnr space space.
          p_retco = sy-subrc.
          EXIT.
        ENDIF.
        CALL FUNCTION 'CONVERT_OTF_2_PDF'
          EXPORTING
            use_otf_mc_cmd         = 'X'
          IMPORTING
            bin_filesize           = bin_filesize
          TABLES
            otf                    = otfdata[]
            doctab_archive         = lt_doc
            lines                  = lt_tline
          EXCEPTIONS
            err_conv_not_possible  = 1
            err_otf_mc_noendmarker = 2
            OTHERS                 = 3.
        IF sy-subrc <> 0.
        PERFORM protocol_update
            USING '303' 'PO Convertion from OTF to PDF failed'
                  space space space.
          p_retco = sy-subrc.
          EXIT.
        ENDIF.
    Get object description from mail title of output types
       SELECT SINGLE objdes INTO lw_objdes
              FROM tnati
              WHERE spras = sy-langu
              AND   kappl = nast-kappl
              AND   kschl = nast-kschl.
       CONCATENATE lw_objdes ekko-ebeln INTO lw_objdes SEPARATED BY
    space
        DATA L_TXT(255) TYPE C.
        DATA L_TXT2(255) TYPE C.
        CONCATENATE 'STO' EKPO-EBELN 'Created for' EKPO-WERKS '/'
    EKPO-LGORT
        'Supply Plant' EKKO-RESWK into l_txt separated by space.
        lw_objdes = l_txt.
        CONCATENATE 'STO' EKKO-EBELN INTO L_TXT2 SEPARATED BY SPACE.
        APPEND L_TXT2 TO LT_TEXT.
       APPEND lw_objdes TO lt_text.
    Instantiate
        CLASS cl_cam_address_bcs DEFINITION LOAD.
        CLASS cl_abap_char_utilities DEFINITION LOAD.
    insert by sapnislina 22.12.06
      DATA : CONTENT_OUT TYPE SOLIX,
             LINE_WIDTH_SRC TYPE I,
             POS_OUT TYPE I,
             POS_IN TYPE I,
             LEN_OUT TYPE I.
      DATA OBJBIN LIKE SOLISTI1 OCCURS 0 WITH HEADER LINE.
      DATA : BEGIN OF CONTENT_IN,
                LINE TYPE TLINE,
                DUMMY TYPE TLINE,
             END OF CONTENT_IN.
      TYPES PDF_RAW TYPE X LENGTH 268.
      FIELD-SYMBOLS <PDF_BIN> TYPE PDF_RAW.
      DESCRIBE FIELD CONTENT_IN-LINE LENGTH LINE_WIDTH_SRC IN BYTE MODE.
      REFRESH lt_data.
      CLEAR CONTENT_OUT.
      POS_OUT = 0.
      LOOP AT OTFDATA INTO CONTENT_IN-LINE.
        ASSIGN CONTENT_IN TO <PDF_BIN> CASTING.
        MOVE <PDF_BIN> TO CONTENT_OUT-LINE+POS_OUT.
        ADD LINE_WIDTH_SRC TO POS_OUT.
        WHILE POS_OUT >= 255.
          APPEND CONTENT_OUT TO lt_data.
          CLEAR CONTENT_OUT.
          SUBTRACT 255 FROM POS_OUT.
          IF POS_OUT > 0.
            POS_IN = LINE_WIDTH_SRC - POS_OUT.
            MOVE <PDF_BIN>+POS_IN TO CONTENT_OUT-LINE.
          ENDIF.
        ENDWHILE.
      ENDLOOP.
      IF POS_OUT > 0.
      APPEND CONTENT_OUT TO lt_data.
      ENDIF.
    end inserted by sapnislina 22.12.06
    starting to create attachment to mail
        TRY.
           CLEAR send_request .
    Create persistent send request
            send_request = cl_bcs=>create_persistent( ).
    Build the document
            document = cl_document_bcs=>create_document(
                                i_type    = lc_type  "RAW
                                i_text    = lt_text  "def of output type
                                i_length  = '12'
                                i_subject = lw_objdes ).
    Attached the document object
            CALL METHOD document->add_attachment
              EXPORTING
                i_attachment_type    = 'PDF'
                i_attachment_subject = lw_objdes "definition of output
    type
                i_attachment_size    = '12'
                i_att_content_hex    = lt_data.
    completed first part to attached PO (pdf format) as attachment
    Now attach the PO related attachments to the mail..
    .... need to read from table DRAD and get all the attachment per PO
         at run time
         REFRESH: lr_po_pr."lt_return.
            CLEAR:   lr_po_pr,lw_return.
            MOVE  'ICP'  TO  lr_po_pr.
         CLEAR: lw_object.
    completed second part for PO related attachments
    Now prepare to send mail
    Add document to send request
         CALL METHOD send_request->set_document( document ).
    Get sender object
         sender = cl_sapuser_bcs=>create( sy-uname ).
    Add sender
         CALL METHOD send_request->set_sender
           EXPORTING
             i_sender = sender.
         LOOP AT lt_recpt INTO lw_recpt
                          WHERE NOT smtp_addr IS INITIAL.
          recipient = cl_cam_address_bcs=>create_internet_address(
    lw_recpt ).
    Add recipient with its respective attributes to send request
            CALL METHOD send_request->add_recipient
              EXPORTING
                i_recipient = recipient
                i_express   = 'X'.
            CLEAR recipient.
         ENDLOOP.
    Send the document
        CALL METHOD send_request->send
          RECEIVING
            result              = sent_to_all.
    Catch any exception
          CATCH cx_bcs INTO bcs_exception.
              CALL FUNCTION 'NAST_PROTOCOL_UPDATE'
                EXPORTING
                  msg_arbgb = bcs_exception->msgid
                  msg_nr    = bcs_exception->msgno
                  msg_ty    = bcs_exception->msgty
                  msg_v1    = bcs_exception->msgv1
                  msg_v2    = bcs_exception->msgv2
                  msg_v3    = bcs_exception->msgv3
                  msg_v4    = bcs_exception->msgv4
                EXCEPTIONS
                  OTHERS    = 1.
              p_retco = sy-subrc.
        ENDTRY.
      ENDIF.
      IF NOT result-tdfaxid  IS INITIAL OR                      " 422131
         NOT result-tdmailid IS INITIAL.                        " 422131
        CLEAR syst-msgv1.                                       " 422131
        IF NOT result-tdfaxid IS INITIAL.                       " 422131
          syst-msgv1 = result-tdfaxid.                          " 422131
        ELSEIF result-tdmailid IS INITIAL.                      " 422131
          syst-msgv1 = result-tdmailid.                         " 422131
        ENDIF.                                                  " 422131
        CALL FUNCTION 'NAST_PROTOCOL_UPDATE'                    " 422131
             EXPORTING                                          " 422131
                  msg_arbgb = 'VN'                              " 422131
                  msg_nr    = '095'                             " 422131
                  msg_ty    = 'I'                               " 422131
                  msg_v1    = syst-msgv1                        " 422131
             EXCEPTIONS                                         " 422131
                  OTHERS    = 1.                                " 422131
      ENDIF.                                                    " 422131
      IF result-userexit EQ 'C' OR
          result-userexit EQ 'E'.
        p_retco = '9'.
      ENDIF.
    ENDFORM.                               " ENDE
    end inserted
    Regards
    Nislina

    Hi Nislina,
    Could you please let me know how do you solve this issue.
    Code:
    if lt_binary[] is not initial.
    *     add attachment to document
             call method document->add_attachment
               exporting
                 i_attachment_type      = 'PDF'            
                 i_attachment_subject = 'My Attachment'
                 i_att_content_hex      = lt_binary.
      endif.
    Thanks & Regard's
    Sateesh

  • Error during install when doing the Oracle Database Configuration Assistant

    OS: Windows 2003 Server
    Oracle Version: 10g
    Error: ORA-12638: Credential retrieval failed
    Why would we get this error on a new install? I'm finding Oracle extremly difficult to even get installed. We couldn't get it to install on a Windows XP Pro machine and now we can't get it to install on a 2003 Server machine. I have no problems with Microsoft SQL server installs. Any help would appreciated. As I understand even though we are an Oracle partner we still would have to pay for phone support. We would just get a discount. Any help would be greatly appreciated. We need to get Oracle running ASAP.

    I ran into this error at a customer's location where Active Directory was being used. This is how I fixed it:
    Open the sqlnet.ora file (located at <ORACLE_HOME>\network\admin) with notepad and comment out the following line:
    <tt><b>#SQLNET.AUTHENTICATION_SERVICES= (NTS)</b></tt>
    Here's a quick explanation of why this error occurs:
    <blockquote>ORA-12638: Credential retrieval failed
    Cause
    The database and client always cross authenticate each other if NTS authentication is negotiated.
    This is regardless of whether the user will ultimately be authenticated by the database using a user name and password or OS credentials. NTS authentication happens at the start of the handshake. For NTS authentication to succeed both the client OS user and the database server must be in the same domain or in two domains which trust each other.
    Solution
    Either create trust between the two domains or change the client or server SQLNET.AUTHENTICATION_SERVICES such that NTS in not negotiated in the connection handshake. NTS is only negotiated if both client and server have SQLNET.AUTHENTICATION_SERVICES set to NTS.
    Credential retrieval failed
    HTH,
    Jim

  • Getting "Windows-No Disk" error when try to open itunes

    itunes will no longer open. Every time I open it I get a Windows-No Disk error that says "There is no disk in the drive. Please insert a disk into drive." itunes just totally freezes up and I can't access anything. This error makes no sense to me. (BTW, I tried putting in and taking out disks in drives, but no change.)
    I think this problem started after I upgrade but can't remember now.
    I haven't seen anyone else mention this error so I'm stumped... and very frustrated. Appreciate any help.

    I have the same probelm and I think it's also from upgrading to the free 7.1 version of iTunes.

  • Runtime error r6034 when try to open itunes

    How do I fix runtime error r6034?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

Maybe you are looking for