Quicktime error in Final Cut Studio II

Hello everybody,
since yesterday I am figthing with the following problem in Final Cut Studio II.
First I wanted to export my subtitles through the XML Export in Final Cut Pro 7.0.3 but this did not work out, as it looks like the stack had an overflow and it says: "XML translation was aborted due to a critical error".
As I tested, some smaller projects are possible to export XML but not my main project.
I looked for different fixes as the system and the projects worked some days before.
Then I checked if I can Export the Sequences with compressor as I allways did and I get an error "Failed: QuickTime Error -50" after some processing time!
This is the content that is getting logged by the Console:
9/4/11 3:37:23.289 AM[0x0-0x56056].com.apple.FinalCutPro: Final Cut Pro(2717,0xac2862c0) malloc: ***mmap(size=1097728) failed (error code=12)
9/4/11 3:37:23.289 AM[0x0-0x56056].com.apple.FinalCutPro: *** error: can't allocate region
9/4/11 3:37:23.289 AM[0x0-0x56056].com.apple.FinalCutPro: *** set a breakpoint in malloc_error_breakto debug
9/4/11 3:37:23.289 AM[0x0-0x56056].com.apple.FinalCutPro: Final Cut Pro(2717,0xac2862c0) malloc: ***mmap(size=1097728) failed (error code=12)
9/4/11 3:37:23.289 AM[0x0-0x56056].com.apple.FinalCutPro: *** error: can't allocate region
9/4/11 3:37:23.289 AM[0x0-0x56056].com.apple.FinalCutPro: *** set a breakpoint in malloc_error_breakto debug
9/4/11 3:37:30.937 AM[0x0-0x56056].com.apple.FinalCutPro: Final Cut Pro(2717,0xac2862c0) malloc: ***mmap(size=2097152) failed (error code=12)
9/4/11 3:37:30.937 AM[0x0-0x56056].com.apple.FinalCutPro: *** error: can't allocate region
9/4/11 3:37:30.937 AM[0x0-0x56056].com.apple.FinalCutPro: *** set a breakpoint in malloc_error_breakto debug
9/4/11 3:37:30.937 AM[0x0-0x56056].com.apple.FinalCutPro: Final Cut Pro(2717,0xac2862c0) malloc: ***mmap(size=2097152) failed (error code=12)
9/4/11 3:37:30.937 AM[0x0-0x56056].com.apple.FinalCutPro: *** error: can't allocate region
9/4/11 3:37:30.937 AM[0x0-0x56056].com.apple.FinalCutPro: *** set a breakpoint in malloc_error_breakto debug
9/4/11 3:37:30.937 AM[0x0-0x56056].com.apple.FinalCutPro: Final Cut Pro(2717,0xac2862c0) malloc: ***mmap(size=2097152) failed (error code=12)
9/4/11 3:37:30.937 AM[0x0-0x56056].com.apple.FinalCutPro: *** error: can't allocate region
9/4/11 3:37:30.937 AM[0x0-0x56056].com.apple.FinalCutPro: *** set a breakpoint in malloc_error_breakto debug
9/4/11 3:37:30.937 AM[0x0-0x56056].com.apple.FinalCutPro: Final Cut Pro(2717,0xac2862c0) malloc: ***mmap(size=2097152) failed (error code=12)
9/4/11 3:37:30.937 AM[0x0-0x56056].com.apple.FinalCutPro: *** error: can't allocate region
9/4/11 3:37:30.937 AM[0x0-0x56056].com.apple.FinalCutPro: *** set a breakpoint in malloc_error_breakto debug
9/4/11 3:37:35.367 AMcom.apple.launchd.peruser.503: ([0x0-0x56056].com.apple.FinalCutPro[2717]) Jobappears to have crashed: Bus error: 10
9/4/11 3:37:36.611 AMReportCrash: Saved crash report for Final Cut Pro[2717] version 7.0.3 (7.0.3)to /Users/Christian/Library/Logs/DiagnosticReports/Final CutPro_2011-09-04-033736_papamac.crash
9/4/11 3:41:26.188 AMFinal Cut Pro: CFURLCreateWithString was passed this invalid URL string:'/System/Library/PrivateFrameworks/vmutils.framework' (a file system pathinstead of an URL string). The URL created will not work with most file URLfunctions. CFURLCreateWithFileSystemPath orCFURLCreateWithFileSystemPathRelativeToBase should be used instead.
9/4/11 3:41:30.100 AM[0x0-0x5d05d].com.apple.FinalCutPro: objc[3166]: Class libCompressorKit isimplemented in both /Applications/Final CutPro.app/Contents/MacOS/Plugins/Transcoder.bundle/Contents/MacOS/Transcoder and/Library/Application Support/ProApps/SharedA/Frameworks/Motion/Ozone.framework/Ozone.One of the two will be used. Which one is undefined.
9/4/11 3:41:30.100 AM[0x0-0x5d05d].com.apple.FinalCutPro: objc[3166]: Class objCWrapper isimplemented in both /Applications/Final Cut Pro.app/Contents/MacOS/Final CutPro and /Library/ApplicationSupport/ProApps/SharedA/Frameworks/Motion/Ozone.framework/O zone. One of the twowill be used. Which one is undefined.
9/4/11 3:41:30.100 AM[0x0-0x5d05d].com.apple.FinalCutPro: objc[3166]: Class LicenseObject isimplemented in both /Applications/Final Cut Pro.app/Contents/MacOS/Final CutPro and /Library/ApplicationSupport/ProApps/SharedA/Frameworks/Motion/Ozone.framework/O zone. One of the twowill be used. Which one is undefined.
9/4/11 3:41:30.777 AMimagent: [Warning] Tried to add listener: com.apple.FinalCutPro but we're notwaiting for it
9/4/11 3:41:30.953 AM[0x0-0x5d05d].com.apple.FinalCutPro: objc[3166]: Class ImageSequenceMedia isimplemented in both /Library/Application Support/ProApps/Bundles/Soundtrack ProIntegration.bundle/Contents/MacOS/Soundtrack Pro Integration and/Library/Frameworks/AECore.framework/Versions/A/AECore. One of the two will beused. Which one is undefined.
9/4/11 3:41:30.953 AM[0x0-0x5d05d].com.apple.FinalCutPro: objc[3166]: Class MotionDocumentInfo isimplemented in both /Library/Application Support/ProApps/Bundles/Soundtrack ProIntegration.bundle/Contents/MacOS/Soundtrack Pro Integration and/Library/Frameworks/AECore.framework/Versions/A/AECore. One of the two will beused. Which one is undefined.
9/4/11 3:41:30.953 AM[0x0-0x5d05d].com.apple.FinalCutPro: objc[3166]: Class OZTimeMarker isimplemented in both /Library/Application Support/ProApps/Bundles/Soundtrack ProIntegration.bundle/Contents/MacOS/Soundtrack Pro Integration and/Library/Frameworks/AECore.framework/Versions/A/AECore. One of the two will beused. Which one is undefined.
9/4/11 3:41:30.953 AM[0x0-0x5d05d].com.apple.FinalCutPro: objc[3166]: Class LicenseObject is implementedin both /Applications/Final Cut Pro.app/Contents/MacOS/Final Cut Pro and/Library/Frameworks/Qmaster.framework/Versions/A/Frameworks/SwampTypes.frame work/Versions/A/SwampTypes.One of the two will be used. Which one is undefined.
9/4/11 3:41:31.014 AMimagent: [Warning] Tried to add listener: com.apple.FinalCutPro but we're notwaiting for it
Thank you for any help on this issue!
By the way, after seening this issue for some time in OS X 10.6.8 I upgraded to 10.7.1 and it did not change anything to the situation.
To me it looks like a plugin conflict but deleting of Caches and .plist's did not change anything to the situation!
Please help!!!
Best Regards,
Chris

After some peacefull time my system crashed completely on Friday!
I installed all from Scratch to make sure its not some old stuff that I carried on during migration.
It's not a problem with the motion files as I deleted all of them and XML export is still crashing!
The situation is, that after installing it all I got the same quicktime translation error again and I am quite angry about how Apple handles clients who are working on projects with the recent FCP story.
Unfortunately due to the problems in exporting XML I am not even able to switch to Adobe Premier as this is the only way to import there.
After a lot of testing I am quite sure, that this issue has to do something with an Apple Update release between June 2011 and now.
Conclusion: Final Cut Studio II is not working correctly anymore as it did before June 2011!!! Apple, Please fix this issue asap.!!!!

Similar Messages

Do you get Quicktime Pro with Final Cut Studio?

Hi, I want to know if quicktime pro is a standard thing with Final Cut Studio.
Thanks.

New Discussions ResponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you by pressing the button over those posts and pressing the button over the post that provided your answer. This not only gives points to the posters, but points anyone searching for answers to similar problems to the proper posts.
If we use the forums properly they will work well...
Patrick

License Error on Final Cut Studio install

We just purchased Final Cut Studio 5.11 from the Mall of America Apple Store. After entering the serial number for Final Cut Studio, the Install screen moves on to the installation type, but gives me the following error,
"Licensing Error: The license file will not be written to disk because the user does not have enough privileges"
I have one account on this machine, which is the Administrator account, I am logged into it during installation, I even have a done a few things that made it ask me for my password, and this still comes up.
After encountering that error, i was still able to install the software, but none of the programs will run, each asking for name/company/serial, then telling me the liscense file is not found.
Help!
thank you!
Ross Hendrickson

I can't seem to find the license file, i've looked under library, and application support.
I have checked on my permissions, and I have read&write permissions to my home folder, applications, system, and both library folders.
In the Final Cut forum it said people were having problems with upgrading. I had an old version of FCP that I thought I had deleted, but maybe that is causing problems? Should I somehow uninstall all FCS/FCP info and start over?
thanks!
-Ross

Error installing Final Cut Studio and iLife on Leopard

When I upgraded to Leopard, I decided to entirely wipe my boot drive since I was experiencing problems with certain applications (ie: Final Cut Pro) in Tiger. Therefore I've been re-installing all of my applications in Leopard. I've been having some problems though, when I try to install Final Cut Studio, I get this message after a while of it trying to install the Apple Soundtrack Pro loops disc:
http://salsunproductions.com/misc/fcsinstallproblem.jpg
I also get a similar error when trying to install iLife 06.
The strange thing is that I am able to run the Applications fine with the exception that all my Final Cut Studio applications don't remember their serial number and my name/organization. I get this message every time I boot up a Final Cut Studio Application (this is the original Final Cut Studio, PPC)
http://salsunproductions.com/misc/fcssnbootup.jpg
Message was edited by: salilsundresh

As for the registration problem:
http://discussions.apple.com/thread.jspa?messageID=4582284&#4582284
As for the disc install, if you're sure you're disc isn't just scratched, then I guess there's nothing to do but wait for 10.5.1 and see what happens.

Final Cut Studio destroyed Quicktime in Safari

I just installed Final Cut Studio on my Macbook running 10.4.7 which installs version 7.1.2 of quicktime pro. But now Safari won't play any quicktime movies though my Firefox and Flock browsers will play QTmovies. I'd download and reinstall quicktime normally but Final Cut Studio doesn't give me a serial number for QTPro so I suspect that if I reinstall quicktime I'll wind up with no more quicktime pro or at the minimum I'd have to uninstall Final Cut Studio and reinstall to get QTPro and might be back in the same loop
Anyone have any experience with this or think of a way around getting Safari to show quicktime movies?

Yes...it "unlocks" Quicktime Pro.

Installing Final Cut Studio Now Safari doesn't show QT

I just installed Final Cut Studio on my Macbook running 10.4.7 which installs version 7.1.2 of quicktime pro. But now Safari won't play any quicktime movies though my Firefox and Flock browsers will play QTmovies. I'd download and reinstall quicktime normally but Final Cut Studio doesn't give me a serial number for QTPro so I suspect that if I reinstall quicktime I'll wind up with no more quicktime pro or at the minimum I'd have to uninstall Final Cut Studio and reinstall to get QTPro and might be back in the same loop
Anyone have any experience with this or think of a way around getting Safari to show quicktime movies?

But now Safari won't play any quicktime movies though my Firefox and Flock browsers will play QTmovies.< </div>
You might try the Quicktime forum here on apple.com. All I can tell you is that yours is the first post I can recall describing this particular issue with an installation of FCP.
I'd download and reinstall quicktime normally but Final Cut Studio doesn't give me a serial number for QTPro so I suspect that if I reinstall quicktime I'll wind up with no more quicktime pro or at the minimum I'd have to uninstall Final Cut Studio and reinstall to get QTPro and might be back in the same loop< </div>
Your Pro license is part of the FCP install now so it will be still be there, it's not associated with the QTPlayer any longer.
You can force a reload of earlier versions of QT by going to your Library and searching for receipts for QT updates. Delete them and Software Update will pull down a new update file for you.
Umm, on second thought, wait for a few more hours till some other folks respond to your inquiry.
bogiesan

Final Cut Studio 2-Error Installing

Hi,
I insert the Disk and after a minute I get the following message:
"There were errors installing the software"
Previously I had FInal Cut Express which was removed. I noticed instead of an install I am getting an "upgrade" when installing?
Any advice?
Thanks
I am running QuickTime Player_7.5.5

Which version of Final Cut Studio did you purchase ... the full retail version or an upgrade version?
-DH

Errors During Instalation Of Final Cut Studio 5.1

Aloha,
I am having some trouble here!! I am trying to install FCP Studio Pro 5.1 on my mac. I tried to do an upgrade from FCP 4.5 HD on my orriginal Hard drive. The instalation went through its paces & asked me to put in the second disc. I did then it came back with an anoucment that there were errors during instalation & to try again I did & was never able to get it to instal... Getting frustrated I ran diskworior on the drive & tried again no luck... after some time I thought it might be the drive would not let me because there was an earlier version on there.... so any way after some other problems with this drive I decided to completely erase & instal Mac OSX on my second hard drive that has never had anything on it. I made this my new startup disk & upgraded the OS to OS 10.4.9 I then Tried to install FCP Studio Pro 5.1 on this drive.. this time It never got to ask me to put in another disk it came back with the same error during instalation try again!!!!!! So now I am getting ******!! but odly enough Final cut studio shows up in my aplications. When I click on it it gives me a warning that there was an error registering & once I click ok it seems to launch FCP 5.1....... ?? So is it really there or not??? & why is it not installing the other 4 discs??? and to add insult to this I have tried to install iLife 06 & I get the same error!!!! WHY!!!!!!!!!
Another thing.. I installed FCP Studio Pro 5.1 on another Identical computer down the street & it installed no problem!!!!
Can anyone help Please!!!!!!

I would take a different approach.
I would backup the old drive files to an external, and then do a clean wipe and new install of OS, updates and the FCS.
Best way to do it, in my view.

Quicktime Pro does not install with Final Cut Studio

I have an iMac with software version 10.5.7. I installed Final Cut Studio 2 (Final Cut version 6.05). With other similar installations on an iMac, Quicktime Pro came as a normal part of the software. On this iMac, the Pro version of Quicktime did not get installed. Is there a way to `unlock` it? Thanks

Final Cut Studio install should "unlock" the QuickTime Player Pro features.
What makes you think you do not have it?

Is Quicktime Pro included with Final Cut Studio?

Wikipedia's article on Quicktime Pro says that a Quicktime Pro license comes with Final Cut Studio. Is that true?
I have OS X 10.5.8 and FCS 2, but I can't even tell if I have Quicktime Pro. I see Quicktime Player in my applications folder (version 7.6.6), but I don't see Quicktime Pro.
Is Wikipedia right that I got a QT Pro license with FCS? If so, how do I activate it?
If not, do I just purchase the upgrade from the Apple Store? How do I install/activate the upgrade it?
Thanks

I'd like to re-open this topic. I'm not sure that I have QT Pro either. I recently upgraded the OS to 10.6.4--which included a new QT Player [10.0 (114)]. None of the pro features are there--or the old preferences (or the QT System Prefs). I don't use QT Pro features much, and it's only been about a month since the upgrade, so I didn't notice until now. I used to have it. Did I miss something?
FCP 6.0.6

Updates for Final Cut Studio, Quicktime, and OS X on new iMac? Which ones?

Hello All,
Okay, so I have been searching through the forums about updates for all the software updates, and which ones work and which ones don't. The Tiger vs. Leopard battle. The ones that have had no problems doing all the updates and the ones who are suffering terribly. But it is really hard to pinpoint everything since it is all spread out over so many different pages. So I am hoping that this question will be of benefit to others in my situation.
So I have a new iMac Alu 24" 2.4 ghz, and 4 gig of RAM. I did software update for everything except the OS and not for Quicktime. So I am running OS X 10.4.10 and Quicktime 7.2
I installed FCP Studio 2 without a hangup. I did not even bother to install Color because I knew that it would be more then this GPU could handle. I didn't bother with Live Type either. Don't use it at work and don't think it will be any different at home. So I intalled FCP 6, Compressor 3, Motion 3, Soundtrack 2, and DVD Studio 4. I have done no updates to any of the Studio programs. So I am looking for some opinions (more then one would be appreciated). What updates should I do and which ones should I avoid for my particular setup? I want to do this as right as I can the first time around.
Again sorry, if this seems redundant, but I want to get everything together in one place to make sure that I don't miss something from split up forums. And hopefully this will help others. Sorry about the length.
My Current Situation:
Alu iMac 24" 2.4ghz, 4 gig of RAM
OS X 10.4.10
Quicktime 7.2
Final Cut Pro 6.0
Motion 3.0
Compressor 3.0
DVD Studio Pro 4.0
Soundtrack Pro 2.0
Which updates? If the almighty Shane Ross would like to step in, please feel free to. Thanks folks for any and all help.

UPDATE: Okay, so I gave my Final Cut a really simple run through last night. Just shot some footage on the HV20 and imported it and did the Apple recommend workflow for the reverse telecine. (I know, I know, doing the full out reverse telecine to get it to 24p is unnecessary if I am just going back to video, but I just wanted to give it whirl) Anyways it worked, and it came out great. So I dropped into a 24p timeline and through it together, and no software malfunctions. No complaints. During log and capture, there was a lag between my player and the computer, but the footage after capture was right on targert (I am referring to audio sync).
So as long as it works, I am happy. Besides, I don't plan on using on board audio too much since there are no XLR inputs unless I get a Beachtek. Different story, sorry.
So currently, with absolutely no Studio updates, OS X 10.4.10, and QT 7.2, on a brand new iMac, 2.4ghz, 24", everything is as it should be. I'll keep checking back in to see if anyone recommends an update for me or if I encounter problems and what caused them.
-Albert
Message was edited by: JayEnder

Final cut studio pro 6 install problems and error message

Purchased a new macbook and am having trouble installing Final Cut Studio Pro 6- get this error message: You can't open the appliction FinalCutStudio.mpkg because PowerPC applications are no longer supported - have never seen this before, any clues?

The installer requires Rosetta to be present, but Lion doesn't include it anymore. You can try to install Rosetta from a Snow Leopard disc using the "Optional Installs". Note that this is not officially supported: http://support.apple.com/kb/HT4769
There have also been reports that Lion will break most plugins for FCS 2 and FCS 3.

My final cut studio keeps giving me this error out of memory message when ever i try to render a piece of footage and its closing unexpected. Does anybody know the reason?

My final cut studio keeps giving me this error out of memory message when ever i try to render a piece of footage and its closing unexpected. Does anybody know the reason?

I had this problem about 2 months ago and, as others have suggested in this thread, eventually traed it backed to some stills I had scanned and brought into the project. Accidentally I had changed the scanner settings, with the result that a couple of skills were well beyond 1980 x 1020 pixels. I resampled the stills and everything was fine again. Hope this might help.

When saving Quicktime.mov from final cut it says error or memory full. I have 16tb of memory between 4 drives any insight?

when saving Quicktime.mov from final cut it says error or memory full. I have 16tb of memory between 4 drives any insight?

I've shutdown, restarted and opened project and saved again. but it still reads the same...

Final cut studio 3, quicktime pro

just installed final cut studio on new laptop.
i thought it came with quicktime pro, but can only find quicktime.
does that mean another $29 investment?
if it's there, where can i find it?
many thanks,
berniej

I found this thread after having the same problem. I went through the steps suggested, but it didn't help me. I still have the regular QT instead of the Pro version. Any thoughts?

Quicktime error in Final Cut Studio II

Similar Messages

Maybe you are looking for