Quicktime Error loading latest iTunes

I can't load latest version, i have done un-installs and repairs and still says i have an older version of Quick time and to reinstall iTues which i believe has the latest version's of Quick time as well ?

Hello StNautius,
Welcome to the Discussions Boards.
You should be able to resolve this issue by following the steps in the "General installation troubleshooting" section of this article:
http://support.apple.com/kb/HT1926
Charles

Similar Messages

Down Loaded latest itune update, will not reconise my devices to syn

Down loaded latest itune update on PC windows 8, will not reconise my devices to syn Ipad,Iphone, Ipod

Have the same issue but with iPod Nano 7 Gen. Happened Yesterday after Yosemite update to 10.10.2

Quicktime errors when installing itunes.

I've been trying to install itunes for the last couple of days and have folowed the instructions provided by apple. When I try tpo run the program I always get the following ' Quicktime error. Quicktime failed to initialise (error-2096). Please uninstall itunes , then reinstall itunes again.
I've done this abut half a dozen times and it's not working. Getting a bit fed up with the whole thing.
Anyone got any ideas??

You should find the compatibility tab if you are looking in the right place.
Could you confirm what you did.
Open My Comupter, then the c: drive
Open c:\Program Files\Quicktime
Right click on Quicktimeplayer.exe
Select Properties.
The compatibility tab should be right there.

Quicktime error when opening itunes why?

I have used itunes for a while with a Nano, i recently got an iphone. Now no matter wht i do i get a quicktime error. It says Quicktime was not found. I have a hp with windows 7. I have deleted about 6 times and reinstalled. I have cut off all protection running. I have followed the instruction on this web site. Please help!

For those reading this who do not have a QuickTime settings icon visable in their Control Panel window - look to the top left of the Control Panel window and click on Classic View.
The QuickTime icon will be visible.
I did have K-Lite but I installed it as part of WMPod after I had all this palarva, thinking I would then be able to sync via Windows Media Player. Not so, Windows Media Player did not recognise the plug in - did not have it listed in the options windows.
When I double clicked on the QuickTime icon in Control Panel (classic view) I got this message;
An exception occurred while trying to run "C:\WINDOWS\system32\shell32.dll,Control_RunDLL
"C:\WINDOWS\system32\Quicktime.cpl",Quicktime"
I had in fact deleted what I thought were duplicate QT plugins (there were half a dozen in the Programs\Internet Eplorer folder and more in Mozilla).
So I downloaded QuickTime (again) and selected repair once the installation window was up. Double clicked on QuickTime in Control Panel again.
Same message again.

QuickTime error when starting iTunes

I have a 30Gb Video iPod. I have a new laptop, and moved software over from previous laptop using PC Relocator. I get an error message when I try to start iTunes: "QuickTime version 7.0d0 is installed, iTunes requires QuickTime version 7.0.3 or later. Please reinstall iTunes." I removed both iTunes and QuickTime through 'Add/Remove Programs' in the control panel, and reinstalled iTunes from both the original install disk and from the iTunes website, and got the same error. I also reinstalled QuickTime version 7.0.3, and get the same error. Has anyone run into this problem and gotten it fixed?
Thanks in advance for your assistance.

Go here and rool down to the section "Clean up iTunes installer files on the computer" then disable any antivirus programs and reinstall iTunes from the net http://docs.info.apple.com/article.html?artnum=93976
If that does not nail the issue, try installing the standalone version of quicktime here http://www.apple.com/quicktime/download/standalone.html

Quicktime Error 2330 during Itunes and Quicktime Installation

Whenever I try to install Itunes or Quicktime the Erro 2330
pops up and says ProgramFiles/QTSystem/QuicktimeMPEG4Authoring.Resources/no.lproj
I tried to uninstall Quicktime with the same error along with another number Error 1603.
I downloaded the Windows Clean Up and deleted Quicktime but when I manually go into Program Files and click Delete, it does not delete and says something about QuicktimeMPEG4Authoring.Resources thing.
PLEASE PLEASE Help!

Whenever I try to install Itunes or Quicktime the Erro 2330
pops up and says ProgramFiles/QTSystem/QuicktimeMPEG4Authoring.Resources/no.lproj
2330s, especially ones that cite language resource files and folders (you seem to having a problem with Norwegian resources), can often be caused by disk damage near the files in question.
so perhaps try running a chkdsk over the drive that your 2330 is citing. see:
How to perform disk error checking in Windows XP
does the chkdsk find/repair any damage? if so, does the itunes/QuickTime install go through properly afterwards?

Quicktime Error When Reinstalling iTunes

Hello,
I recently had some problems with iTunes on my desktop which required me to reinstall the software. After reinstalling the software and trying to run it, it gave me an error message saying I had to install a later version of Quicktime. I downloaded the newest version of Quicktime and tried to install it and got an error saying the version I tried to install was older than the version I had installed. I then uninstalled both iTunes and Quicktime and removed registry entries with the program Registry Mechanic and reinstalled iTunes WITH Quicktime included. I received the same error message saying I had to install a later version of Quicktime. I then tried to reinstall Quicktime and got the same error I received before. iTunes and my ipod both work fine on my laptop, so the problem seems to be just with my desktop. Any suggestions would be greatly appreciated, thank you.
Generic with P4 chip Windows XP

Hey try opening quicktime. Thats what i did, and after getting it up and running, iTunes started working again.

Quicktime error when opening itunes.

When I open itunes I keep getting this error:
AppName: itunes.exe AppVer: 7.1.1.5 ModName: quicktime.qts
ModVer: 7.1.6.200 Offset: 0006f333
looks like some type of quick time error. I started happening after the 7.1.6 upgrade. Any suggestions?
Windows XP Pro

Quick Time will not open. "I get a Buffer overrun detected!" error message. This error is given by Microsoft Visual C++ Runtime Library. The steps I have take so far are to uninstall itunes and quick time, delete the temp folder, run MS clean up utility, run CC cleaner and cleaned up the registry for the uninstalled items. I then went back and reinstalled quick time and then itunes. I still get the same error. Itunes will open fine after a reboot. After a while it does not open anymore.

Just loaded latest version of itunes and now it won't open I get the following error message MSVCR80.d11 missing and error 7 windows error 126, can anybody help

Just loaded latest iTunes update and now it won't open i get a message eror MSVCR80.d11 followed by error 7 Windows error 126, anybody help?

Hi Jeff,
see for your problem:
http://pcsupport.about.com/od/findbyerrormessage/a/msvcr80-dll-not-found-missing -error.htm
it worked for me.
Grtz

This movie requires QuickTime error message

I have a new Mac, the latest OS, the latest QuickTime and the latest iTunes. Furthermore, all of my movies/TV shows are purchased via iTunes, so there are no dodgy ripped versions / home movies / media conversions or whatever. It is all Apple from hardware to software to media purchase.
So, I get this message "The movie requires QuickTime which is not supported by this version of iTunes". It seems odd to me that somebody has actually written such an error message in the first place. How can any version of iTunes not support QuickTime, and yet, there is an "official" iTunes error message. Maybe it actually means "This movie requires (an older vesion of) Quicktime which is not supported?"
Anyway, I have researched this already, of course, and there seems no agreed way of dealing with it. Some say rebooting works (if only), others say run it in 32 bit mode (it crashes), others say start it up in safe mode etc. I cannot make it work. A few diagnistic things that may help:
I had several TV series of a show working fine. I downloaded a new series of the show, and now none of the series of that show play, and the artwork has gone.
I tried deleting some shows and adding them to the library again, but they don't add. iTunes behaves as if the files simply aren't there - but they are.
I can go to these shows and double click and they open and play with QuickTime with no problem, so the files are there, and work, and presumably have whatever "codecs" or whatever that are needed to play them.
If anyone out there can help, I'd be really grateful.
Oh, and a message for Apple, if anybody there bothers monitoring these things... This makes me really angry. I pay top dollar for your hardware and software becuase "it just works", then I have to pay a fortune for media bought through iTunes, which is usually far, far cheaper on DVD, and what do I get for that? Constant misery from iTunes. This is far from the first problem I have had. I don't rip or pirate stuff, I'm not trying anything clever, I don't have all sorts of rubbish installed on my Mac, or try running Windows or whatever. I am a simple Mac customer, running your basic stuff, and buying my media from you, and IT DOESN'T WORK. Pathetic! I wish to God I had never got into the whole Apple thing a few years back, which is something I constantly warn friends about if they say they like the look of my Mac.

Have you compared the downloads using "Get Info" to see if the failing ones have some common attribute that the successful ones don't have? For example, might either the failing or the successful ones be M4V files while the opposite attribute is something else?
The other thing I've thought of is to ask whether you have any i-Devices (iPhone, iPad, etc.) that enter into the problem. If you have any, they're not involved, right?

Downloaded Latest iTunes version, Playlists missing

Sooo... I decided to go to iTunes.com and download the latest version. It told me there was an error loading my itunes library file. I went back to the new download file and tried again. Same error. So I manually did: FILE > ADD FOLDER TO LIBRARY, etc. Important to note is I have my song files/iTunes Library on an extenrnal harddrive... a K:/ drive.
The song files have returned but all of my playlists are gone. It wouldnt normally be a huge deal, but three of them were my iPad, my iPhone and my iPod... Pretty involved. Willing to do the work to recover from scratch... No luck in attempts to try an older version of iTunes, or to try to delete, repair or reinstall. Any advice? THANKS!

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

After Upgrade to latest iTunes, it will not open.Uninstall and reinstall did not help Getting this error message '' Runtime Error R6034 '' An application has made an attempt to load the C runtime library incorrectly''. 3 windows PCs.1 vista, 2 windows7 7

I upgraded to the latest iTunes 11.1.4, after a prompt from the iTunes store. But will not open after the upgrade. One of three error messages told me to reinstall. I did. Restarted and scanned. But no help there. So I unistalled and re installed from Apples' website. The installation was okay as usual but still will not open. Keep getting the same error messages. '' Runtime Error R6034, '' '' An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information.'' That's the error messages I get when I try to open the New installed iTunes 11.1.4. Right now there is no iTunes on any of my PCs. Installed but will not open. Please Help.Thanks.
Jonas.
3 Windows PCs. Safari 5.1.5 ( One Laptop with Vista. Two Windows 7 64 bit on All in One Sony desktop PCs. )

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

When I attempt to sych with I tunes I get the following Error Message. "Itunes was unable to load data class information from synch services. Reconnect or try again later." How do I fix this? This started happening after I updated to the latest version

When I attmpt to synch my Iphone I get the following error message. "Itunes was unable to load data class informationfrom synch services. Reconnect or try again later. This started after I uddated to the latest version of Itunes. What should I do?

My iPods are working fine...this is just on our iPhone 3GSs....friend said his iPhone 4 was working fine with upgrade.
Tried: the winsock reset, uninstall/re-install of iTunes, shut the firewall down. Even called Apple...and after 2 hours of being told that "I'm savvy and have done everything they'd recommend" still with no fix...
Still: Takes over 2 minutes (not hooked up to phone) to open Edit-Preferences-Device...and can't find any backups?!?! Takes over 2 minutes to even open the phone to change spps, musice, books, etc....but won't let me do anything with contacts...wonder if this is what that error message is about (because I don't actually sync to an email program, I've just kept it all on the phone - mistake).
**banging head on table**

I have been using itunes on my windows based pc for years but since installing the latest itunes update I have been getting the error message A required itunes component is not installed. Please reinstall itunes. (-42404)

I have been using itunes on my windows 64 bit laptop for years but since downloading the latest itunes 10.7 update whenever I opened itunes the error message 'A required itunes component is not installed. Please reinstall itunes (-42404)'
Itunes would still load and play music in my library and I could still sync my ipod but when loading a CD itunes would not recognise the album/tracks and I would need to type them manualing after uploading.
I have just bought the new iphone5 and went to sync the phone with itunes. itunes recognises the iphone when plugged in via the usb port or when wi fi is turned on but itunes will not allow the phone to sync.
I spent over an hour the other morning speaking to apple customer support and have ensured I have administer right and that UAC is turned off.
I was taken through msconfigure and adjusted the startup tab but still no joy.
In the end I was e-mailed instructions on how to uninstall and then reinstall itunes and component parts.
Now that I've uninstalled itunes when I try reinstalling I get the following messages during the download.
The 1st message is;
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
When I click ok the next message that appears sometime later during the install is;
Service 'Apple Mobile Device' (Apple Mobile Device) Failed to start Verify that you have sufficient privileges to start system services.
The options I have are to abort, retry or ignore. If I retry the same message comes back and if I abort or ignore the download continues and I then get the following message:
'Apple Application Support was not found. Apple Application Support is required to run itunes Helper. Please uninstall itunes, then reinstall itunes again. Error 2'
After attempting to reinstall itunes only some components were installed however itunes would not open.
It would appear many people have experienced problems with this latest download!

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

After installing the latest itunes/quicktime update, I can no longer access the itunes store and my iphone does not complete syncing. What can I do to fix this?

After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this? I have tried uninstalling and reinstalling itunes. I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?

The problem is with version 10.4.1. I had to reload 10.3 to get it to work. The recommendation from a previous poster worked for me. Here was their list of steps:
Go to Control Panel>Programs>Uninstall
2. Uninstall the following Apple programs in the following order:
     a. iTunes
     b. QuickTime
     c. Apple Software Update
     d. Apple Mobile Devices Support
     e. Bonjour
     f. Apple Appllcation Support
3. Reboot PC
4. Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes. To correct this:
5. Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
6. Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
7. Copy and Paste this file back into the iTunes folder
8. Rename this "iTunes Library (date).itl" file by removing the date. It should say "iTunes Library.itl"
9. Reboot PC

Quicktime Error loading latest iTunes

Similar Messages

Maybe you are looking for