Quicktime Error message 2738 GELP PLEASE

I am loosing my Mind!!! I am trying to download the new Itunes with new quicktime and when it starts to install I get "can not finins.....error message 2738
I can not even unistall...I tried to Uninstall in order to reinstall....same message when I try to uninstall....HELP PLEASE
I bought a new ITouch and I can't use it because I can not install the new Itunes
THANK YOU

OS=Operating System
Need to know which version you have? To find out click on the Apple in the upper left hand corner of your computer screen.
Now click on About This Mac.
The next window that pops up, will tell you which version of Mac OS that is currently installed on your computer.
The latest version is (Tiger) OS 10.4.10.
======================
*Repairing Permissions:*
Save and/or quit your applications & doucuments
Go to Applications>Utilities Folder
Click Disk Utility
Click the Volumn (HD) that you want to check.
Click the Repair Disk Permissions button. (Don't worry about verifying)
At the bottom of window when the repairs have finished, you will see the “most important thing”:
Permission Repairs Complete
The previliges have been repaired or completed on the selected volumn.
Restart your computer (Optional).
Go to Applications>Utilities>Disk Utility and select your volume and then select Repair Permissions.
**Same directions are also in the OS Mac Help Menu.**
==================
Repairing permissions from the Tiger DVD
Boot up from your Tiger Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
If Disk First aid is able to complete the repair now click on the "Repair permissions" button.
Once this process has been completed restart your computer.
See Knowlege Base Article:
http://docs.info.apple.com/article.html?artnum=25751 About Disk Utility's Repair Disk Permissions feature
TIP-You should Repair Permissions & restart:
After installing and/or updating an OS (Operating System).
After installing software.

Similar Messages

Upgrading to 7.4.1 - Error Message 2738

I have iTunes 7.3.0 and am attempting to upgrade to 7.4.1. The installion gets about 70 percent of the way there before it hits a problem when attempting to update Quicktime, Error Message 2738 shows up. Anyone know what the problem is?
Thanks.

I had the 2738 error for both Quicktime and Itunes. The solution of running the command; regsvr32 vbscript.dll in the system32 folder did not work for me.
I'm running Vista 64 Bit Home Edition. After much trail and error this is what worked.
open Command Prompt using a right click "Run as Administrator".
cd to C:\windows\syswow64
type- regsvr32 vbscript.dll, then hit enter.
This is not an official solution but it worked for my 64 bit system.

Itunes + quicktime error message - service 'ipod service' (ipod service) fa

Help! Got new iPod Nano for Christmas and I STILL cannot get it to show up in iTunes - it has showed up in my device manager - with an over the icon - "The drivers for this device are not installed (code 28) To reinstall the drivers for this device, click Reinstall Drivers. - Then another error - Wizard cannot find the software to instal -(my iPod did not come with a disk!!!) I have done the "R's" several times! Downloaded and installed and uninstalled several x's from iTunes. Changed USB locations - I have three to choose from. Now - I am 'repairing' the latest installation from iTunes and I get this "itunes + quicktime error message - service 'ipod service' (ipod service) failed to start. Verify that you have sufficient privileges to start system services". Any ideas??? I'm not a computer genious....but I'm not a complete newbie, either! I am so FRUSTRATED!!!! This should be that difficult - I added additional RAM and it was a breeze and successful! This is just ridiculous! Any one have any other ideas???? I have read so much - even emptied the battery and recharged!!! HELP! Please! I just wanna hear some music!!! waaaaaaaaaaaaaaaaaaaaa!

Thanks - I got it to install by going into 'run' to get to permissions, etc. So that seems OK - but my computer is still not acknowledging iPod software and for some reason iTunes is now showing 'the URL could not be opened' when I go into Help for iPod. It's still not showing up in Itunes, either

When I try to sign in to my account on iTunes, I get the above error message, along with "Please review your account information". When I then click on "Review"

When I try to sign in to my account on iTunes, I get the above error message, along with"Please review your account information".
When I then click on "Review", it comesup with the page "Create an Apple Account for the iTunes Store"and presents me with the Terms Of Service.
When I click "Agree", It is disabled.
Can anyone tell me why this has happened and how to resolve it?
Please, please, please help.

Count me in as having the same problem. I have been leaving messages in the iTunes for Mac forum where others in there also are having problems. I have been unable to access my account since 11/7/2007. E-mails with Apple have not worked and now I haven't heard back from them since Saturday. I have tried both on a Mac and Windows machine and keep receiving the same error message that:
This Apple ID has not yet been used with iTunes.
I last purchased music with this account on 10/30/2007. I even tried resetting my password, changing my account info, trying on a computer with iTunes 7.4, etc. I have money in that account and 150 songs and 5-6 tv shows that I cannot access. I also just purchased a new computer and cannot sync my iPod with this computer since these songs will not transfer.
Apple really needs a phone number for technical support. Having to deal with e-mails back and forth (and waiting a day for each e-mail) is not a good business practice. Hopefully they will have a phone number in the future.
Either way, count me in on getting annoyed that a week later, this issue has not been fixed.

The error message: SE 337 Please enter a line number.

Dear Experts,
We have a PO that can not be transferred to P1 because of the error message:
SE 337 Please enter a line number.
We tried to checked the transfer of the PO.
The error message came from the Backend Function BBP_PO_INBOUND.
But it is not possible to define the exact cause of the issue (the exact transfer parameter) due to missing RFC authorization.
The following changes were made in the PO (PO already mapped in Backend) after that PO cannot be transferred:
- a deleted item was set back
- WBS Element was changed
Thank you in advance.
Best regards
Evgeny

Hello Evgeny,
Whenever you create a PO in SRM irrespective of number of the
line items chosen, in the backend system this PO will contain
a single line item in the Item section.
If you delete all the line items in the PO and
attempt to undelete them the undeletion will not work since the PO is already
considered to be deleted in the backend.
Please try delete and undelete a individual line item
in a PO provided there is at least one item which is not deleted.
hope this helps
Daniel

Error Message = ORA-20001: Please make sure all system pa

Hi,
We have 2 business group one default setup business group and another one new one.
There is a common custom workflow for timesheet approval. This workflow process working without any problem with default business group (setup Business Group). But new businees group giving following error:
Error in Workflow PMSTSAPR/50112*156 ORA-20001: Please make sure all system pa
Item Type = PMSTSAPR
Item Key = 50112*156
User Key =13-OCT-01
Error Name = -20001
Error Message = ORA-20001: Please make sure all system pa
Error Stack =
XXPM_WF_TS_APPROVAL_PKG.start_sub_approval_workflow p type PMSTSAPR pkey 50112*156 item type PMSTSAPR item key 50112*156/1(PMSTSAPR, 50112*156/1)
XXPM_WF_TS_APPROVAL_PKG.Find_Approver - 8 (PMSTSAPR, 50112*156)
Wf_Engine_Util.Function_Call(XXPM_WF_TS_APPROVAL_PKG.FIND_APPROVER, PMSTSAPR, 50112*156, 173547, RUN)
Activity Id = 173547
Activity Label = TIMESHEET_APPROVAL_PROCESS:START_CHILD_PROCESS
Result Code = #EXCEPTION
Notification Id =
Assigned User =
I will appreciate, if somebody can help me .
Also this workflow process are submitting from Oracle Forms.
Regards
Satheesh Kumar

Problem solved,
Custom database function raised this error

Upgrading itunes for new ipod 30mb - getting quicktime error message and

Hi there,
I am upgrading itunes 4.7.1 for a newly purchased ipod 30mb using itunes site downloaded setup.
I am getting an error message as it reaches a certain point and won't install.
I get this:
The cabinet file "QuickTime.cab"required is corrupt and cannot be used. This could indicate a network error, and error reading from the CD Rom or a problem with this package.
Then I get
'The installation of QuickTime did not complete. Itunes needs QuickTime'Error message 2350'
This is on a PC with an earlier version Itunes 4.7.1
QuickTime is supposedly up to date and presents not problems.
Any help would be appreciated I am a klutz....
hp pavilion f1903 Windows XP

After comprehensive net search I resolved the problem by downloading itunes/quicktime in IE. I had been using mozilla and it was a simple as this!

ITunes won't open, QuickTime error message

By accident, I deleted QuickTime, and can now not open iTunes, so I downloaded QuickTime again, recieved a message that QuickTime has been successfully downloaded, but when I try to open/run it, I get this error message:
"C:\Documents and Settings\Owner\Local Settings\Temporary Internet Files\ContentIE5\TYMNQEZC\Quicktimeinstaller[1].exe is not a valid Win32 application"
I am a computer illiterate, Please help me!

hmmm. let's try an alternate technique for swapping out your QuickTime that doesn't involve redownloading an installer.
first let's just make sure your previous QuickTime is thoroughly gone.
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

QuickTime Error Message: "QuickTime Player quit unexpectedly"

Error Message: "QuickTime Player quit unexpectedly"
From the error report (sent to Apple):
          QuickTime 10.2 (603.6)
          Operation: Launch
          Application Specific Information: [565] stack overflow
Hardware and software configurations:
          MacBook Pro 15" Retina Display
           Mac OS X 10.8.2
Affects ALL .mp4 files (double-click and attempting to open file from within QuickTime)
Occurs when attempting to launch QuickTime by double-clicking an .mp4 file, or attempting to open an .mp4 file from the QuickTime menu. Attempting to open ANY .mp4 file results with this error message.
QuickTime is the default application for all .mp4 files. Reseting this option via the Finder "Get Info" had no effect. Changing the option to another video player (e.g., MPEG Streamclip) allowed the .mp4 files to play. Returning to QuickTime as the default player resulted in same error message (i.e., "QuickTime Player quit unexpectedly").
The video files (.mp4) are not the problem; ALL of the files open within iTunes, MPEG Streamclip, and other video players. The problem appears to be limited to QuickTime or something that is interfering with QuickTime.
Note that no external drives or other peripherals are connected to the computer when this error occurs, except for a Wi-Fi connection via an Apple Time Capsule (disconnecting the Wi-Fi did not resolve the problem; same error message occurred when attempting to open an .mp4 file).
No 3rd party QuickTime plug-ins have been installed.
QuickTime was working fine and playing ALL videos until the last week. No discernible usage pattern is evident for diagnosing the reason for the error message.
Note the exact same problem is occurring on two separate MacBook Pro 15" Retina Display systems, both running Mac OS X 10.8.2
Mac OS X 10.8.2 software is up-to-date.
Rebooting the system did not rectify the problem.
Two separate computers, both exhibiting the same problem with different .mpg4 files.
Any ideas?
The consideration of a reply is appreciated.

Paull71
To Apple Discussions!
You are not disturbing me. In order for anyone here to help you, you must provide details of what the problems you are having with QuickTime in order for the users here to provide proper troubleshooting suggestions.
Also, please indicate all the the troubleshooting things you have tried to solve your issue. This will eliminate the +"been there done that"+ scenarios.
If your problem is not like the one of this posting, then you will need to re-post as a New Topic so that your issue *can get more focused attention.*

Quicktime error message.. can't update!

I am trying to update my version of Itunes/Quicktime. However, when I run the update, I'm given this message and the update is aborted:
The InstallScript engine on this machine is older than the version required to run this setup. If available, please install the latest version of ISScript.msi
Yikes! What does this mean and how do I go about fixing it??
I have an emachines computer with Windows XP, sp2.

Is there anyone out there who can help us with this error message/problem?
We'd greatly appreciate any advice!
tx,
Stephanie

When i try to open qiick time i get an error message that says "please apple application support"" How do I do that?

when i try to open quicktime, i get an error message. "please install apple application support".
How do I get it?

Download the free QuickTime Player again. The support files are part of the installer.

I tunes version 7.5 and error message 2738

Have made several attempts recently to download the latest version of i tunes (7.5) but everytime I try I get almost to the end of installing and then when it starts to install quicktime I get an error message which is 2738 and says it cannot complete the install.
Can anyone help before I chuck my laptop out of the window!!!
Thanks

Have you tried the following troubleshooting document?
iTunes and QuickTime for Windows cannot be installed without Visual Basic Script (VBScript)

Error message while burning/ please help!!

I am getting an error message when I am trying to burn a dvd this is probably the 10th movie project I have made into a dvd, never had this problem. Here is the message:
There was an error during rendering/encoding of the menus/slideshows. The burning process has been cancelled.
Please help i need this dvd by 2pm tomorrow.

I know you said you have made slideshows before, but does this article have anything that applies to you?
http://support.apple.com/kb/TS2303
I hope this helps.

Error Message in DW, PLEASE HELP? :)

Hello, all..
I have a screen capture of the error message I'm getting when
I try to save an htm file I've created for a page. Had the site all
built and when went in to make a quick change to site, the error
started popping up and now I can't save any changes to the page.
I've uninstalled DW and reinstalled but it still persists.
Can I send the screen capture to someone and receive
opinions? I am running MX 2004. Can't afford to buy anything new
and I don't do enough web work to invest in more software. I don't
know how to post an image here, so if someone would please tell me
how to get the image to them, I'd be more than glad to send it. I'm
desperate.....I need to get this fixed. Thank you! Carolyn

Upload the image somewhere and post a link to it, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"tobiano1" <[email protected]> wrote in
message
news:eqlgto$ltc$[email protected]..
> Hello, all..
> I have a screen capture of the error message I'm getting
when I try to
> save an
> htm file I've created for a page. Had the site all built
and when went in
> to
> make a quick change to site, the error started popping
up and now I can't
> save
> any changes to the page. I've uninstalled DW and
reinstalled but it still
> persists.
>
> Can I send the screen capture to someone and receive
opinions? I am
> running
> MX 2004. Can't afford to buy anything new and I don't do
enough web work
> to
> invest in more software. I don't know how to post an
image here, so if
> someone would please tell me how to get the image to
them, I'd be more
> than
> glad to send it. I'm desperate.....I need to get this
fixed. Thank you!
> Carolyn
>

Error Message ME 083, "Please enter plant" while creating PR or PO

Hi,
I have one problem in my SAP system. Eventhough i maintained everything in IMG customization relevent settings to create PR or PO and Org str well defined with comany, plant etc, assignments of org str well done, while creating PR or PO, system throughs error message "Please enter plant". Eventhough i manually enter the plant number in PR or PO, again i get the same error. The error message number is ME 083. Please guide me how to overcome this error?
Thank you.

Hi
Did you create the plant form scratch or did you copy it from an existing one.
If it is the last, check the assignments again.
See [626252|https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=626252] or [580164|https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=580164]
regards
Sidi

Quicktime Error message 2738 GELP PLEASE

Similar Messages

Maybe you are looking for