QuickTime Error: Operation could not be completed. (OSStatus error -2125.)

Hello there,
I have recovered data from a bad disk and would like to save it as a movie with QuickTime. But it is always giving me this error message at the end, almost before it finishes saving the file:
The movie "Caribou_migration4" could not be saved.
Operation could not be completed. (OSStatus error -2125.)
Does anyone know why is this happening and what can I do. If I don't resave this video, I am not able to use it / or import it to Final Cut Pro!! Help!
Thank you

Hello,
Err -2125 means "File offset too big".
Something is wrong in the movie file, for sure.
It's not a surprise given that you've recovered it from a bad disk.
Your file can probably be repair by my "Movie Repair Service".
http://aeroquartet.com/movierepair/
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."
Regards, BJ

Similar Messages

The operation could not be completed. (osstatus error 2.)

I have 3 bufallo network storage devised. One of which I want to use for time machine back ups. Unfortunately when I select the drive to use as the back up I get the error 'Time Machine can't access the back up disk "time machine". The operation couldnt be completed. (OSStatus error 2.)"
I use the administrator name and password but still get the error.
Any ideas?

it is rare on these forums to not get a response quickly. If no one can help with the direct question, what alternatives do I have for help?
I'm guessing I could always call apple for help, but anyone know how much that would cost?
Thanks

Operation could not be completed. client error not possible.

I have a mac mini running OS10.5.8. All of a sudden I can not print with my HP1315v all in one printer. I can print a test but that is all. I get this message. "Operation could not be completed, Client error no possible". I re-installed the HP software but that didn't help. I ran a permissions repair with Disk Untilities but that didn't correct the problem. Any help would be appreciated. :-) Dave

I can't help, because I'm getting the same ERROR suddenly with my Samsung ML-2010 laser printer. NOTHING will print and the "Status" of the print job(s) all show "Stopped". It's driving me nuts!
For some bizarre reason, I can still print to my other printer, a HP laserjet 2550L. It does not see to be affected in the least.
Anyone got any ideas for a remedy?

Server 2008 Pinter install error OPERATION COULD NOT BE COMPLETED (error 0x900f0214)

I downloaded the HP Universal printer driver for a LaserJet 4250dn network printer to our server running SERVER 2008 SP2.
I dowloaded the zipped executable files for both the PCL5 and PCL6 drivers to the desktop and ran the EXE to unzip the files. When I tried to run the INSTALL.EXE file (as an ADMINISTRATOR) for BOTH drivers, the following occurs:
Answer YES to EULA
Select TRADITIONAL MODE (or DYNAMIC MODE - it doesn't matter - neither one works)
Click INSTALL
Immediately I get the error OPERATION COULD NOT BE COMPLETED (error 0x900f0214)
Click OK
Click FINISH
This happens with both the PCL5 & PCL6 driver installations.
I activated FILE SHARING, PRINTER SHARING, and NETWORK DISCOVERY but did not solve the problem.
I was logged in as the Domain Administrator and the Local Admin also.
Any suggestions?

Hi selmore,
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

TS3899 I have just set up my new iphone 5 from my 4. My mail is not coming through and it keeps asking me for my Yahoo password which i am putting in and then it says operation could not be completed (MFMessgeErrorDomain error 1032) what does this mean

Im having trouble setting up my mail. I have just upgraded from a iphone 4 to 5. mail keeps asking for my password when i put it in it comes up saying
the operation could not be completed (MFMessageErrorDomain error 1032)
what is this??

Nice try! Take a hike.

Backup Error - Operation could not be completed. (OSStatus error -54.)

Hi all,
I use the provided Backup software on my macbook (OS X 10.5.5).
I schedule some documents and email to backup each day. I use Microsoft Entourage for email.
This has all worked fine until the past couple of days (which I think is when I installed a Microsoft Office update).
When looking at the log, the error is:
Unable to copy /Users/xxxxxx/Documents/Microsoft User Data/Office 2008 Identities/Main Identity/Database: Operation could not be completed. (OSStatus error -54.).
I'm guessing this could be some kind of permissions problem - can anyone advise how to resolve it?
The database file is 350mb if that makes any difference.
Thanks and Regards,
Hal

I've had exactly the same message, (but with OSStatrus error -36) which is cutting short a backup (using Backup) of my home folder from my iBook G4 to the HD of my intel iMac both running Leopard.
It has happened three times after about an hour or so and I've never been able to complete a backup, which I desperately need to do before I run a complete erase and reinstall of my iBook.
Does anyone have suggestions of what's going wrong here?

C4440 scan error Operation could not be completed (error 0x00000015). The device is not ready.

I have updated, restarted, etc. Sometimes when scanning I do not get this message, but more often I do.
When scanning I receive the following message:
Error message when scanning "Operation could not be completed (error 0x00000015). The device is not ready.
Please help!!

Hello, nylamama:
Follow the steps in this document, and you should find the help you need to resolve the error.
Let me know if this helps, and thank you for contacting HP!
Cheers,
SN_63 (Saint Nana): I work on behalf of HP.
Click the thumbs up icon if you want to say "Thank you." To help others on the forum, select "Accepted Solution" on the post that solves your problem.

Error - Operation could not be completed.

I am running an AMD quadcore with 8 gb of memory and windows 7 ultimate 64-bit. The photoshop version is cs5 and I installed pixelBender 2.2 with extension manager running in admin mode. It installed successfully and told me to retsart PS which I did. when I select the PixelBensder Gallery all I get is a dialog error box that says "Operation could not be completed". I have read through the forum posts and have not seen this problem reported. Can someone point me in the right direction to solve this error. Thanks. MLS

You should be able to run the CS5 plugin no matter whether the "Enable OpenGL Drawing" checkbox is enabled. The fact that you had to "Enable OpenGL Drawing" to get the plugin to work is odd. In any case, I'm glad the plugin is working for you now. Happy filtering.

Error Operation could not be completed movie rental

I Rented a movie and when I press "Watch" it asks if I want to play it, Press OK and I get the message"The operation could not be completed". Home sharing is on, mirroring is on...It briefly shows the remote control screen then the Rented Movie screen comes back on with the Error message displayed. help!

You should be able to run the CS5 plugin no matter whether the "Enable OpenGL Drawing" checkbox is enabled. The fact that you had to "Enable OpenGL Drawing" to get the plugin to work is odd. In any case, I'm glad the plugin is working for you now. Happy filtering.

Capture Error- Operation could not be completed as there is no video.

Hi. I'm using Final Cut Express HD 3.5.1 and I seem to have a problem importing video. I successfully imported one DV tape (out of several for a film project I'm working on) using the DV-NTSC Easy Setup.
I use a Canon Optura 40 camera connected via a Fire Wire 400 cable. The cord runs straight from the camera (where it has a 4-pin connector) to the computer. As a longtime iMovie user I followed all the proper procedures - the camera is in VTR mode the tape is ready to go.
Now, Device Control says "VTR" OK and the playback controls in the program actually control the tape. Everything seems right so far. But when I click "Capture Now" in FCEHD it says, "This operation could not be completed as there is no video." What's more is that FCE freezes up (processing cursor) until I take the camera out of VTR mode.
Apple reccomends using the Fire Wire Basic Easy Setup. I've tried that. It still doesn't work.
Another curios note - iMovie seems to have the same problem, which I've never encountered until I've tried to use the camera with this computer - I'm running on a recently purchased MacBook Pro (2.33 GHz, 2 GB RAM) off of an external hard drive (G-Drive 7200 RPM 500 GB).
I am stumped.
Can anyone lend a hand?

So, I tried sending the camera into the FireWire 400 Port on the back of my external HD and I still got the same problem in FCE.
Here's what's really interesting - it will import into iMovie with the new setup.
Whenever my camera is in VTR mode and the Capture Screen is even just OPEN in FCE, the computer freezes until I take the camera out of VTR mode.
I'm really stumped. If I would have to install new components inside of my laptop I might just vie for loading the footage into iMovie and transferring it (if there's no loss of quality. Is there?) but I'm still hopeful for a simple solution to getting FCE to recognize the camera.
I can't really load the footage into my Mac's HD because it's not big enough. I have a video project with about 12 DV tapes of footage, and my internal HD definetely couldn't hold that.

Moved Bridge location; Error operation could not be completed

So I recently installed a 120 gb ssd to be used for my startup files. I installed leopard, upgraded to 6.8, downloaded and installed lion, couldn't properly back up from a time machine back up or a migration so just started over and moved all my files over, (applications, libraries, system and bootup), keeping my music, movies and pictures on my main 500 gb. I also did a clead install of CS5 suite but Bridge is still a no go with the response that the operation could not be completed. I've looked around on these forums and have found that this comes up when you move the adobe applications. However I still have not found a soloution so any help would be greatly appreciated.
I have a unibody late 2009 white Macbook.

So I recently installed a 120 gb ssd to be used for my startup files. I installed leopard, upgraded to 6.8, downloaded and installed lion, couldn't properly back up from a time machine back up or a migration so just started over and moved all my files over, (applications, libraries, system and bootup), keeping my music, movies and pictures on my main 500 gb.
Don't quit understand your configuration, you mean you did manage to build 2 HD in your MacBook?? or do you use the SSD in the MacBook and the 500 GB as external?
However, moving libraries and system software instead of install again is usually not the best idea...
You should first try to back up custom settings for PS like tools, actions and other presets. Then use the PS help menu to deactivate permanently and use the uninstaller for PS to uninstall it. Maybe even use the clean tool for PSCS:
http://www.adobe.com/support/contact/cscleanertool.html
And it would not be a bad idea also to use the leopard install disk again to restart from and then use the option to install and archive the system again. This does not take long and creates a whole new library while making a back up of your old one. Use the software update (it will present you the combo update to 6.8) to get the latest updates.
Then try again to install PS and I would think you should be OK.

IPhoto says it cannot import my photos b/c they may be an unrecognized file or the file may not contain valid data. The operation could not be completed. Error code is: ImageCaptureCoreError-9905.

Unable to download photos from my camera. iPhoto returns an error message that states: The following files could not be imported (they may be an unrecognized file or the files may not contain valid data). FILE NAME: 100_0490.JPG REASON: com.apple.ImageCaptureCoreError- 9905. WHAT'S UP WITH THAT? Did not have a problem importing photos under the LEOPARD OS, however, now that I have upgraded to Yosemite 10.10.3 the iPHOTO app is not performing the imports.

Are you using Photos, or iPhoto? Maybe you've got a corrupt file on your camera. I would try using the image capture application to import the bad picture to my desktop. If it works and the picture looks ok, then delete that pic from the camera, then try to import into iphoto again. You can then import the pic it was saying was bad from your desktop.
Or, try downloading all the pics using image capture and then import from the download folder.

ERROR: Operation could not be completed.(kCFErrorDomainCFNetworkerror 302.)

I have a 3G phone and I am continually getting this message when trying to surf the web. I am on FIDO network and on the 3G data site. Half the time it is about as fast as a 28.8 modem connection. I have been in contact with FIDO tech support and they haven't been able to rectify the problem. Has anyone else had this message and if so did you get the fix?
PLEASE HELP!! This is the whole reason I got the Iphone was to Utilize the Web function.

I'm getting the same error message, but only when I access a certain site over the cellular network. If I access it via Wi-fi it works fine. The page in question is http://abominable.cc . What would cause this? It's just a simple Wordpress installation and the plugins are all disabled. Site is hosted on GoDaddy.
I'm using a 3G iPhone on the FIDO network.
I've tried resetting the network settings and soft-resetting the iPhone, but it doesn't help.
I'd just like to be able to administer the site from the road. It's very frustrating.

I'm trying to make a photo cd on iphoto. Each time it stops with this message "Operation could not be completed. (OSStatus error - 9459.) What am I doing wrong?

I'm trying to make a photo cd on iphoto. Each time it stops with this message "Operation could not be completed (OSStatus error - 9459).
What am I doing wrong?

By photo CD do you mean you're trying to burn image files to a CD disk from iPhoto? How are you going about this?
OT

"Operation could not be completed. (OSStatus error -6602.)"

What is this error about? I am trying to use the seagate at home backup harddrive and when i try to back it up to my time machine i get this message "Operation could not be completed. (OSStatus error -6602.)" what do i do?

jjbmmm wrote:
After signing into to NAS server, I get the following error:
Operation could not be completed. (OSStatus error -6602.)
Welcome to Apple's discussion groups.
I haven't reviewed it in detail for accuracy, but you might find useful advice in this post:
http://www.somelifeblog.com/2009/02/fixed-time-machine-backup-to-network.html

QuickTime Error: Operation could not be completed. (OSStatus error -2125.)

Similar Messages

Maybe you are looking for