Quicktime error when trying to export FCPX movie to YouTube

I have an established YouTube account and I'm having trouble uploading one of my videos to YouTube. It just seems to crap out at about 12% done, and I get a Quicktime error. I'm sharing it via Final Cut Pro X.
I haven't had this problem with any of the other videos I've tried to upload to YouTube, including a couple of simple test videos today. The test videos all uploaded just fine.
The video I'm trying to upload is about 5 minutes long and has a lot of still images and transitions. Maybe it's very data-heavy and that's why it's falling over? Should I do something like compress the file before trying to share it to YouTube? Or make it into a master file first and then upload to YouTube from my browser instead?

IMO, using YT uploader is more reliable.
Although I responded differently to your other thread, based on the additional info here, it sounds like you might have a bad render file. I'd suggest you:
turn off background rendering;
delete project render files
without rendering, export a short section of your project to a Pro Res master file.
If that works. d the whole movie with the YT uploader.
Russ

Similar Messages

Hi, i get the error -49 when trying to Export a Movie edited in iMovie and recorded with Elgato Video Capture anyone know why i get this Error and can help me?

Hi, i get the error -49 when trying to Export a Movie edited in iMovie and recorded with Elgato Video Capture anyone know why i get this Error and can help me?

Read this
http://support.apple.com/kb/ts1583

Error when trying to export excel from Chrom

Hi,
I get the following error message when i try to export the excel from Chrome browser. Has anyone encountered this error when trying to export from Chrome ? can you please give me the solution.
Thanks.
Error message:
To export a list, you must have a Microsoft SharePoint Foundation-compatible application

Hi,
From your description, when you export a SharePoint list to excel from chrome, you get an error.
In my SharePoint 2013, when I export a SharePoint list to excel from chrome, it works fine.
For your issue, make sure the excel client have been installed in your environment.
To narrow down the issue, I would like to confirm the following information:
To check whether the issue is related to the browser, I suggest you to do a test in other browsers, such as IE and compare the results.
What version is your office client? office 2013 or 2010? 32bit or 64 bit?
Besides, here are some similar posts, you can take a look at:
http://community.office365.com/en-us/f/172/t/160015.aspx
https://social.technet.microsoft.com/Forums/office/en-US/5ffbeb9e-6eb1-41c2-8141-edab6039bbde/to-export-a-list-you-must-have-a-microsoft-sharepoint-foundationcompatible-application?forum=sharepointadminprevious
I am looking forward to your reply back.
Best regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Error when trying to Export

Hi all,
I'm getting a javascript error, when trying to export. (i.e. "Deployment Management" -> "Export").
When I click on this link, a popup window is appearing. But, on that window, a javascript error occures. Nothing display on that window. (empty).
JavaScript error is :
Line : 207
Char : 5
Error : 'ls' is undefined
Code : 0
URL : http://<ip_address>/xlWebApp/DeploymentManager/loadDU.do?method=displayExport
Line : 30
Char : 6
Error : Object expected
Code : 0
URL : http://<ip_address>/xlWebApp/DeploymentManager/loadDU.do?method=displayExport
IE version : 7
This is OIM Fresh installation. I did not do any modification on this yet.
Regards,
Chaturanga
Edited by: chaturanga on Aug 9, 2009 12:04 PM

Hi Martin,
We are using OAM also. So, It might cause these errors. We will try to Install it from the beginning....
Thanks....
But, I have another issue.
1) We put our new changes by running patch_jboss.cmd file. After doing this, if we run xlStartServer.bat on <OIM_HOME>\bin directory, we can see all the changes.
But, if we start jBoss using <JBoss>\bin\run.bat file, we can not see any changes. I try to clear cache using PurgeCache.bat file. But, it is still not working....
2) When we start Jboss using xlStartServer.bat file, loggs are not written into <JBOSS>\server\default\log\server.log file. I try to configure using best practice guide. But, it is still not working...If I start JBoss using run.bat file on jboss, it writes loggs to server.log file..
3) Earlier, when we are doing development, we did not use OAM server to connecto to web site. So, for some customizations, I get the current user's userLogin from
<bean:define id="userLogin" name = "userMemberOfForm" property="userID" type="java.lang.String"/>..This works fine..
But, since we are going to use OAM or Windows authentication to connect to OIM web in live, it returns null or empty for "userLogin"....(if we use the above code)...How can I get the userLogin of the current login user....???
Regards,
Chaturanga

Login error when trying to Export

Hi
I receive an error when trying to export to Word.
The message is simple "An error occurred when signing in", not very useful.
I have reset my password several times and have obviously been able to login here with the same account.
OS Win XP
Browser Firefox 19
Reader 10
Can anyone suggest anything else?
TC

We are outside our 30 days!
YOUR PACKAGE SUDDENLY STOPPED WORKING.
AT YOUR STAFF SUGGESTION I UPGRADED READER AND IT IS NOW TRYING TO GET ME TO UPGRADE IE TO 8.
PRODUCT SUPPORT?
I DON'T THINK SO!!!!!
CUSTOMER SERVICE?
I DON'T THINK SO!!!!!
Thanks for nothing.

Unknown Error when trying to export movie with certain PNG files in Adobe Premiere

Hi!
I've made an animation video in Premiere Pro CC2014 combining apple pro-res live action with png animation. When trying to export, some parts of the video are no problem, and some (seemingly random) png files Adobe Premiere just doesn't like?? I don't understand why it will export some and not others?
Help??!
Thanks so much!!

Error compiling movie can be anything from gap to bad clip, transition, effect, nest, you name it.
Export from AME with preview open and watch were in the timeline it goes wrong.
That is the place to fix it.

"General error" while trying to export my movie.

Hi all, I saw a few threads with this topic but no one seems to have a solution so I thought I would post a new one hoping for a miracle
I have a small movie that I made that I want to export with "using quicktime conversion" option. As soon as I rename the title and choose a destination, I get the "General Error" message that pops up with no number or error code attached to it. I tried saving the file to different hard drives with a lot of space to spare and still won't work. I also did the "render all" option before trying to export my movie. BTW, I'm only at around 11 minutes of movie and my whole project should be about 2 hours...
Also, I chose the correct AVCHD 1920 X 1080 codec since my original data comes from my Canon HF200.
When i was only a few minutes into my project, I did a test film and I managed to export it but had no sound when playing the test movie on my WDTV (that's another problem though) but now it won't even export at all... Any ideas?
Thanks,
Rob

A couple things to try:
1. Decrease the amount of RAM allowed to the application and see if it was a problem with the OS not having enough to function.
2. Basic troubleshooting procedure, trashing preferences and repairing permissions:
http://fcpbook.com/Misc1.html

IMovie error when trying to export-file open with write privilege

When trying to export an iMovie, after about two hours, I got a message - error - a file is open with write privilege. Any idea what might be causing this error or what the error message means?

Ask the users in the iMovie forum: https://discussions.apple.com/community/ilife/imovie?categoryID=141

KeyNote error when trying to advance QT movie in presenter mode

KeyNote goes into black and force restart when trying to advance QT movie in presenter mode.

the video does play when KeyNote is not in presenter mode.
Sorry, I need to check were talking about the same thing, my use of the term 'presenter mode' was a bit vague.
Can you confirm the circumstanses when the video runs correctly?
click on the play button in the tool bar
if you double click the video in the canvas window
select "use alternate display to view presenter information" in Keynote preferences and you press play button in the tool bar
deselect "use alternate display to view presenter information" in Keynote preferences and you press play button in the tool bar

What is an Error -8961 that is returned when trying to export a .mov file as an MPEG-4 file

I'm trying to view some .mov videos on Windows using QTPro. I get audio, but no video. I am trying to work around this by exporting the file to some other format and perhaps using another player. MP4 seems obvious, but any attempts to export generates this error.
The files were originally generated by a GoPro, and uploaded to a MacBook running OS X

FCoC
Thanks for the follow up information.
Premiere Elements 12...have you updated 12 to 12.1 using an opened project's Help Menu/Update?
When you open the program to the Expert workspace and go to Publish+Share/Computer/QuickTime, do you see
presets for QuickTime? Do you have the latest version of QuickTime installed on your computer with Premiere Elements?
Are you running Premiere Elements and QuickTime from a User Account with Administrative Privileges?
Is
The file size of the video is 210.51 GB.
real? Do you mean 210.51 MB? If 210.51 GB, please give a description of your computer resources?
Can you tell us what video compression that Blackmagic Media Express is using with that .mov file extension?
Could you download and install the free codec utility named GSpot and tell us if there are readings for
Video Codec Name Status as well as Audio Name Status?
http://www.headbands.com/gspot/v26x/quick_start.html
Let us start here and then decide what next.
Looking forward to your follow ups. I will see what I can find out about this Blackmagic Media Express.
ATR

QuickTime Pro 7.1 hangs when trying to export a movie.

Hi There,
I just installed the Key for QuickTime Pro on my Win XP laptop. Now, whenever I try to export a movie, QT just hangs there, using 99% of the CPU. The buttons in the dialog box seems to be active (change appearance when I hover them) but clicling any of them (including OK or Cancel) does nothing. The only way out is to kill the QT task.
If I just click OK in the first export dialog, CPU usage jumps to 99% and hangs. If I select "Options" in the export dialog, the "options" dialog itself hangs and the CPU usage jumps to 99%.
I did not try all menu options but it looks like the hang and use 99% CPU is pretty general since I was attempting to do an "Update Existing Software..." From the help menu and QT hang there too. But I can open de preferences, set them and close them without problems though.
Looking in the Application even manager, this is the error reported:
"Hanging application QuickTimePlayer.exe, version 7.1.0.210, hang module hungapp, version 0.0.0.0, hang address 0x00000000."
Any suggestions on how to resolve this issue?
I purchased QT Pro today because I need to convert a sequence of files into a movie. Right now I cannot do that.

Why not try updating your QuickTime software?
Most current version is 7.4.1

Quicktime Quits when Trying to Export

I am using QT 7.04 Pro, and when I try to use the File | Export function, QT unexpectedly quits. I have tried uninstalling and reinstalling to no avail. This happens on two different machines (a Dell 600m and an E1505) and Windows XP Prop (SP2). Has anyone else experienced something similar?
Thanks
Windows XP Pro

Try exporting to the same directory (folder and
drive) as is the application.
Do the files you wish to export play (and behave)
properly in the QuickTime Player prior to export.
Have you tried the export while logged on under a
different user account?
Do you get any error messages?
Wow...Exporting the movie in the same directory as the application works. Weird. Why is that?

Why is Premiere getting an error when trying to export .MXF files?

Hello!
I have a video that I need to submit to DMDS and it must be a .mxf file. This is the first time I've ever had to export a .mxf so I am not too familiar with the type. I have been exporting every other type of file for years and never had an issue (H.264, quicktime, etc.). However, when I try exporting .mxf I get the generic rendering error which then stops the export.
The first time I tried, the video was down to 12 minutes left (after about 2 and a half hours) when I got the error.
The next time, it crashed right away with over 2 hours still remaining.
So it does not seem to be a corrupt clip because: A) I've been rendering this video out as other file types for rough previews, drafts, etc and it's worked fine and B) The 2 crash times were on opposite ends of the spectrum.
I am running an iMac with OSX 10.7.5, 3.06 Ghz Intel Core 2 Duo with 8GB ram...I am using Premiere Pro Version 6.0.0
I do have Third Party plug ins installed but have never had an issue exporting in the past, only with this .mxf file.
Thanks in advance for any and all help!

If you have GPU accelertation enabled in Premiere Pro, try switching to Software Only.
Are you queuing the job to AME or clicking "Export" in the Export Settings dialog (which encodes directly through Premiere)? Whichever path you're going down, try the other one.
I'd also keep an eye on your resource usage, especially RAM, while encoding in progress. With 8GB of RAM, I'd be surprised if that were the problem.
Lastly, if you're encoding through AME, then you might want to post on that product's forum: http://forums.adobe.com/community/ame

Error when trying to export to wmv

i keep getting an error when i try to export my movie to wmv. is anyone else having that problem?

The flip4mac update doesn't appear to solve the problem exporting from iMovie 08. I have updated both iMovie and the flip4mac exporter plug in and still cannot export from within iMovie - it comes up with said error. I have to export to a *.mov file first, and then open that file in quicktime, then export to *.wmv from within quicktime itself. Perhaps using VisualHub would be cheaper (and faster).

Using SSRS local mode, receive invalid token error when trying to export the report when running in worker thread

We're using ASP.net with .Net 4, developing with Visual Studio 2012. We use SSRS 2012sp1 with local reports, so exporting the report ourselves instead of using a reportviewer control (and not using the SQL Reporting service). The reports are
executing fine when we export the report in the main thread, but if we spawn a worker thread and run a report there we receive the following error when calling Render():
Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Failed to load expression host assembly. Details: Invalid token for impersonation - it cannot be duplicated.
We only receive this when running a report that uses expressions on a separate thread. I've tried running the application pool under all the default built-in accounts (NetworkService, etc), and under admin user accounts to no avail.
This didn't occur with the previous version of our application which used .net 3.5.

As mentioned, we are not using the Reportviewer control, we are rendering locally. Not certain if that would make a difference.
Also, I had tried using all the built-in accounts. Just for kicks I changed it to LocalSystem again, then reset IIS (see image below). I then tried to export the report in a worker thread and received the same error.
Here is the text from the exception:
Microsoft.Reporting.WebForms.LocalProcessingException: An error occurred during local report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Failed to load expression host assembly. Details: Invalid token for impersonation - it cannot be duplicated.
at Microsoft.ReportingServices.RdlExpressions.ReportRuntime.ProcessLoadingExprHostException(ObjectType assemblyHolderObjectType, Exception e, ProcessingErrorCode errorCode)
at Microsoft.ReportingServices.RdlExpressions.ReportRuntime.LoadCompiledCode(IExpressionHostAssemblyHolder expressionHostAssemblyHolder, Boolean includeParameters, Boolean parametersOnly, ObjectModelImpl reportObjectModel, ReportRuntimeSetup runtimeSetup)
at Microsoft.ReportingServices.OnDemandProcessing.Merge.Init(Boolean includeParameters, Boolean parametersOnly)
at Microsoft.ReportingServices.OnDemandProcessing.Merge.Init(ParameterInfoCollection parameters)
at Microsoft.ReportingServices.ReportProcessing.Execution.ProcessReportOdp.CreateReportInstance(OnDemandProcessingContext odpContext, OnDemandMetadata odpMetadata, ReportSnapshot reportSnapshot, Merge& odpMerge)
at Microsoft.ReportingServices.ReportProcessing.Execution.ProcessReportOdp.Execute(OnDemandProcessingContext& odpContext)
at Microsoft.ReportingServices.ReportProcessing.Execution.RenderReportOdpInitial.ProcessReport(ProcessingErrorContext errorContext, ExecutionLogContext executionLogContext, UserProfileState& userProfileState)
at Microsoft.ReportingServices.ReportProcessing.Execution.RenderReport.Execute(IRenderingExtension newRenderer)
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(IRenderingExtension newRenderer, DateTime executionTimeStamp, ProcessingContext pc, RenderingContext rc, IChunkFactory yukonCompiledDefinition)
at Microsoft.Reporting.LocalService.CreateSnapshotAndRender(ReportProcessing repProc, IRenderingExtension renderer, ProcessingContext pc, RenderingContext rc, SubreportCallbackHandler subreportHandler, ParameterInfoCollection parameters, DatasourceCredentialsCollection credentials)
at Microsoft.Reporting.LocalService.Render(String format, String deviceInfo, String paginationMode, Boolean allowInternalRenderers, IEnumerable dataSources, CreateAndRegisterStream createStreamCallback)
at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)
--- End of inner exception stack trace ---
at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)
at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
at Microsoft.Reporting.WebForms.LocalReport.Render(String format, String deviceInfo, PageCountMode pageCountMode, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
at Microsoft.Reporting.WebForms.Report.Render(String format, String deviceInfo, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
at IxSS.Infolinx.Report.MicrosoftInfolinxReport.ExportReport(String strFileFullyQualifiedPath, String strExportType, String strFilterDesc, Dictionary`2 extraParams, String area)
at IxSS.Infolinx.Report.MicrosoftInfolinxReport.ExportReport(String strFileFullyQualifiedPath, String strExportType, String strFilterDesc, Dictionary`2 extraParams)

Quicktime error when trying to export FCPX movie to YouTube

Similar Messages

Maybe you are looking for