Quicktime error, windows xp and guitar world cd

at first it ran fine, then i got a macromedia projector error. now when i install gitar world cd, it tells me quicktime 7.0 or higher is needed to run disk iv`e uninstalled and re install quicktime stand alone player a million times with no luck,keep getting same 7.0 message
please help. tried the comatibility wizard, still no joy

Try opening the QT control panel>Advanced tab and put a check in the box Enable playback of Adobe Flash tracks

Similar Messages

Help - Blackberry Error - An Error has occured and Blackberry World will be closed - Tried EVERYTHING!

Whenever I try to launch Blackberry World, I get the message "An error has occurred and Blackberry World will be closed. Try waiting a few minutes and reopening Blackberry World." I have read all of the post and unless I have missed something - nothing is working.
I have a Blackberry Z10 - STK100-1
Software - 10.2.1.2977
I have tried -
launching BBW with just using Wifi
launching BBW with just using Data
launching BBW with Wifi and Data
Hard resets (after changing the above settings)
Soft resets
Battery pulls
Tried to access BBW through "games" .. the three dots, ...
Opening BBW online and trying to access my blackberry through the online program.
AND I have just wiped my blackberry to start over, and it is still not working!!!!! The restore of my data was done using the "quick backup" so it shouldn't be due to a conflict with another program.
Can you please help - I am getting ready to tear my hair out!
Solved!
Go to Solution.

Jennie1997, For those using BlackBerry OS 10.2.1, BlackBerry Virtual Expert is built in and can be opened by opening the Help application followed by tapping Testing along the bottom toolbar.
See here: http://helpblog.blackberry.com/2014/01/introducing-blackberry-virtual-expert-for-blackberry-10-os-10...
So if you have it it may have been FourSquare, ???

Unable to open blackberry world in blackberry z10 error ' an error has occurred and blackberry world must close. Try waiting a few minutes and then reopen blackberry world'

I've been receiving this error ever since u tried to back up my files on my windows laptop, and no matter what I do I can't seem to get it to work.
Is there any work around for this error? Or is there any way to reinstall app world using my browser?
thanks for the replies in advance.

The solution described on http://supportforums.blackberry.com/t5/BlackBerry-World/Can-t-upgrade-BB-World-I-think/m-p/2485451 resolved this issue. Many thanks, sdgardne!

Unable to open blackberry world in blackberry z10 error ' an error has occurred and blackberry world

I've been receiving this error ever since u tried to back up my files on my windows laptop, and no matter what I do I can't seem to get it to work.
Is there any work around for this error? Or is there any way to reinstall app world using my browser?
thanks for the replies in advance.

What else might cause this behavior, and how can I resolve it?
Outdated permissions on the files from your old computer. Right-click, Properties --> Security --> Advanced, disable Inherit settings from parent folders, chose to copy. After that, delete outdated security keys and assign current ones. You may even need to go so fart as to Take Ownership of some files to correctly restore the new system's default security settings.
Mylenium

Quicktime error code 1402 and 1603

I was forced to update my itunes and now they wont install. First I try to install quick and it gets like 99% done then i get error code three. So i was told to go to www.apple.com\quicktime\download\standalone.html and that would fix my problems. So I went to install that and I get error codes 1402 and 1603. Please help me!
dell Windows XP

hiya!
if we fix the 1402, the 1603 will go away of its own accord. here's the best place to start with a 1402:
Error 1406 or 1402 appears when you install iTunes or QuickTime for Windows
love, b

Quicktime Error Code ; -3 and iTunes will not open!!!

I have attempted to install iTunes and am recieving Error Code : -3 when it trys to install quicktime...Then when I attempt to open Itunes after the installation it tells me that 'iTunes cannot run because some of its required files are missing'. How can I resolved this so that iTunes 6 runs correctly, and I can use my iPod??

When I try and install Quicktime, this message appears when it gets to the stage of 'Error 1402: Could not open key HKEY/LOCALMACHINE/SOFTWARE/Apple Computer Inc./Quicktime/InstalledFiles/QuicktimeUpdater.exe. Verify that you have sufficient access to that key, or contact your support personnel'. Then after pressing OK, this error message appears 'Error -1603 Fatal Error during installation. Consult Windows Installer Help (Msi.chm) or MSDN for more information.'
This is what happens when I attempt to open Itunes 'iTunes cannot run because some of its required files are missing. Please reinstall iTunes'

Trying to install Quicktime for Windows XP and iTunes...help!

I am working to set up iTunes and Quicktime on a brand new Dell laptop running Windows xp. I downloaded iTunes, when I try to open it I get a windows error message that it has to close. When I try to open Quicktime, I get an error message that the "plugin did not initialize properly" and "the plugin was found, but an error in the plugin has occured." I have also received the following error message when trying to launch Quicktime from the list of programs installed: "Quicktime failed to initialize error #-2095"
Thank you for trying to help me..I just want iTunes back!!
Lynnrose
Dell Inspiron E1705 Windows XP brand new

"Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Can't open Quicktime: "Error: Unable to create control"

Okay, my problem is that I want to put movies on my new Ipod Touch, and to do that I need to use Itunes to Convert my files to MP4. I have found out that some of my .MPG files can be used, but some of the others can't and thats the same with my .AVI files. I have found a program to convert these .MPG and .AVI files into MP4 files for Ipod. But I found out that it needs Quicktime Player to do that, and unfortunately my Quicktime doesn't work, I don't know why I just can't even get a screen of the program up. When I try to open the program, after a little amount of time an Error window opens and says "Unable to create control" I have tried to delete both Quicktime and Itunes at same time and also just one at a time, I have tried to take an older version of Quicktime and install it, but no matter what I do it just won't work.
Can somebody please help me?

Thank you for trying to help. But I have tried to download the Program MPEG Streamclip as you said but unfortunately it need Quicktime too, the Readme said that there were another program I could use too called Quicktime Alternative. So I tried to uninstall the real Quicktime and install the alternative instead. But either the program MPEG Streamclip can't see that I have removed Quicktime or that I have removed the old one.
Every time I put an .avi file into the program it can only convert about 1:30min of the movie and that is only with the sound no movie, and if I put one of the .MPG (that Itunes can't convert) in an error box pops up and says:
*The Apple QuickTime 6 MPEG-2 Playback Component is not installed...*
Please uninstall QuickTime completely. Then install QuickTime Alternative (1.61 or later), making sure the "Extra QuickTime plugins checkbox is enable.
Alternatively, if you have Apple QuicktTime and you don't want to uninstall it, you can buy MPEG-2 Playback Component from Apple Computer.
I think this is a bit sad cause I just bought the new Ipod Touch and I can't put the movies I like the most.
Hope someone can help me...
But thanks for the time you used to try to help me QuickTimeKirk

Error window while opening web gallery

I've created a few galleries with (Adobe Bridge and) FIreworks and the same error message appears whcn I click on the galleries in my web site.
I keep getting this error message:
Adobe flash has stopped a potentially unsafe operation.
The folllowing local applications on your comptuer or network:
C:\Users\...\gallery.swf
is trying to communicate with this internet-enabled location:
c:\users\...\deep.html
To let this application communicate with the internet, click Settings. you must restart the application after changing your settings.
A little more detail:
<----(Where gallery swf is the application trying to open in the browser and deep.html is the html where this particular gallery resides.)I write this to explain further--->
Then when I click on Settings, the error window disappears and nothing is changed so it happens again and again.
Each time I click on the Settings button, the window just disapppears and nothing is accomplished.
I get this everytime I try to open any of my 10 galleries.
Please help - this is my last assignment. I graduate frm college next week and this is due Friday, Oct 26!
Thanks in advance!
If you want to email me, you can - [email protected] - thanks a lot!
Doug

How big a gallery? Your connection might be timing out.
You could try exporting it to the hard drive to confirm it's not a problem with the photos or gallery itself - if that works ok, you could use separate FTP software to upload it.

Quicktime error code : -3

My Toshiba Tecra S2 laptop running XP Pro SP2 went in to standby and froze there (common problem). Upon rebooting iTunes "has encountered an error and needs to close" every time I try to run it.
I have uninstalled, re-downloaded and upon attempting re-install I get "Quicktime error code : -3" and the install fails.
This is driving me crazy. Any ideas

I deleted the iTunes folder in MyDocuments/MyMusic (renaming iTunes.old instead of deleting will preserve files)and re-installed and everything appears to work.

Exporting Prores 422(HQ) Quicktime error -50

I've been having trouble with this particular file, both in Compressor 3 and 3.5
We're trying to run movie through, and we're getting a quicktime error -50 each and every time. The input is a 1920x1080 59.94i film. We're trying to use compressor to Inverse Telecine the film to 23.98 Prores 1920x1080 progressive. We've had this work with many other projects, but this one just craps out after a couple minutes.
has anyone seen this? could it be something like permissions or something? The file seems just fine.

To the best of my knowledge, Compressor can't be used with i-apps. But it can be used within Final Cut Studio / apple's pro apps.
If you are working with film, I strongly recommend staying within apple's pro apps and not iMovie or iDvd.
(not sure if roxio's toast can address this feature or not but it might also be worth looking into).
Hope this advice is helpful but if not just come on back.
Message was edited by: SDMacuser

I'm unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK

I’m unable to write/burn a CD-R (Verbatim) from a playlist after upgrading to iTunes 12.0.1.26. I get error 4000. I can however write/burn a CD from Windows Explorer and CDBurnerXP v4.5.4.5143 – which implies the device is working OK – and only fails when I write from iTunes. The drivers are up to date
Microsoft Windows 7 x64 Business Edition Service Pack 1 (Build 7601)
Dell Inc. Latitude E6420
iTunes 12.0.1.26
QuickTime 7.7.6
FairPlay 2.7.39
Apple Application Support 3.1
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.0.5.6
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 756D13C00C3583C8
Current user is not an administrator.
The current local date and time is 2015-01-13 14:47:35.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 12.0.1.26 (x64) is currently running.
iTunesHelper 12.0.1.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: SbCeCd (3.2.6.3),
UpperFilters: GEARAspiWDM (2.2.3.0),
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Drive is empty.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.
F: HL-DT-ST DVD+-RW GU40N, Rev A103
Audio CD in drive.
Failed Reading table of contents, error 4000.
Check the website of your computer or drive manufacturer to verify that you have the latest firmware for your CD / DVD drive.
Audio CD reading failed. Error Code: 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87.
iTunes cannot play or import music from a CD in this drive. The drive may need a firmware update. Check with the manufacturer.
Get drive speed failed. Error Code: 4000.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive F: HL-DT-ST DVD+-RW GU40N on CDR media at speed 24X.

Hi iTunes-1,
Welcome to the Support Communities! The error message you posted indicates a possible firmware update is needed for iTunes for Windows to work with your CD drive.
iTunes for Windows: Updating the firmware on your CD or DVD drive - Apple Support
http://support.apple.com/en-us/HT201852
Having outdated firmware can cause issues using CDs and DVDs with iTunes for Windows. Firmware is a type of software stored in a chip in hardware that can sometimes be updated.Identifying drives and firmware versions
To run CD Diagnostics, follow the steps in this document.
After following the steps to run CD Diagnostics linked above, look at section three to find out more about your optical drive(s).
Here is an example of what section three might look like:
In this example there are two drives. Drive E is a Samsung DVD-ROM drive with a model designation of SD-616 that has firmware version F000. Drive F is an NEC drive with a model designation of NR-7900A that has firmware version 1.08.Updating the firmware
If the optical drive you are using came with your computer, check with the support site for your computer for a firmware update. Typically you will need to go to the support website for the computer maker and click on a "downloads" or "updates" link, and then enter your computer model designation and operating system version to see what updates are available. Then look through the available updates for a firmware update for your optical drive. Download the updater and run it. If you need assistance applying the update, contact the maker of your computer.
If the optical drive you are using came as a separate part (was not included with a computer), check the support site for the drive maker for a firmware update. Sometimes the manufacturer is not clear in the CD Diagnostics results. In that case, you may just have to search the Internet for the drive model designation. You can usually find out who made the drive by looking through the results of such a search. Once you have identified who made your drive, go to the support website for that company. Look for a "downloads" or "updates" link, and then enter your optical drive model designation. Download the updater and run it. If you need assistance applying the update, contact the maker of the optical drive.Verifying that the firmware was updated
Run CD Diagnostics again.
Examine the CD Diagnostics results. The firmware version for the drive should be the new version.
Information about products not manufactured by Apple, or independent websites not controlled or tested by Apple, is provided without recommendation or endorsement. Apple assumes no responsibility with regard to the selection, performance, or use of third-party websites or products. Apple makes no representations regarding third-party website accuracy or reliability. Risks are inherent in the use of the Internet. Contact the vendor for additional information.
Last Modified: Nov 8, 2014
Also, you mentioned that you have been successful burning a CD with the Windows OS. Make sure that you have closed all software programs that can access the CD burner so that there isn't a conflict for the drive. Sometimes chaning the burn speed from "maximum" to 8x can also help in this situation.
I hope this information helps ...
- Judy

Hi. Ever since I downloaded the last itunes and quicktime update (a week or so ago), I can't access any video podcasts or movies I have stored in itunes. iTunes keeps crashing and telling me I have a quicktime error. Do I uninstall quicktime? or?

Hi . Ever since I downloaded the last itunes and quicktime update ( a week or so ago), I can't access any movies or video podcasts i have store in itunes on my pc (vista). iTunes crashes and my error reports tell me it is a quicktime error. Do i uninstall and reinstall quicktime, or completely uninstall itunes and reinstall it -- if so, what will i lose? Help, please!

Let's try the following user tip:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

How do I reinstall iTunes 11.1.4 and Quicktime to Windows 7 PC?

I have noticed a fair number of users being unable to reinstall 11.1.4 by iTunes after deinstalling due to errors from the update. I have attempted to reinstall several times but the download installation never shows up on the desktop even though the welcome comment from the manufacturer thanks me for installing the product.
How do I reinstall iTunes and Quicktime and actually get the product back to my PC for use? I am using Windows 7 and have been a supporter of the iTunes for several years and would appreciate being a happy customer again! Thank you.

I have attempted to reinstall several times but the download installation never shows up on the desktop even though the welcome comment from the manufacturer thanks me for installing the product.
Try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

I receive the following error message when trying to install QuickTime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."

I recieve the following error message when trying to install Quicktime for Windows "Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory." I just trying to get the latest version of iTunes. Thanks

"Error writing to file C:/Program Files/QuickTime/QTSystems/QuickTimeCheck.ocx. Verify that you have access to that directory."
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Quicktime error, windows xp and guitar world cd

Similar Messages

Maybe you are looking for