Quicktime errors during install, uninstall, or run

Quicktime errors during install, uninstall, or run. No error code. It just says it encountered an error and must exit.

I located a previous response that satisfied my issue. Below is the process that allowed me to use quicktime.
The "fatal error" in this context has (recently) been indicating trouble with old, misplaced QuickTime componentry lurking about in your system.
(Whether or not the message is a symptom of that problem seems to depend on what version of old misplaced stuff is lurking and what version of QuickTime proper we're trying to install or uninstall ... but in recent times, there's been an uptick in fatal errors being caused by that.)
So let's try investigating that possibility first.
First we'll adjust some view settings on the PC.
1. Open My Computer from the desktop or Start menu.
2. In the Tools menu, click Folder Options.
3. Click the View tab.
4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
5. Click OK.
Now in "My Computer" open Local Disk C: (or whichever drive your operating system is installed on).
Open the "Windows" folder.
Open the "System32" folder.
What files or folders can you see in there with QuickTime in the file or folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.)

Similar Messages

QuickTime Errors During Install

Looking for help. I recently upgraded to iTunes 6 which included the QuickTime 7 upgrade. Can no longer use iTunes due to error messages during the install of QT7. Receiving the following Errors 1402: Could not find key: HKEYLOCALMACHINE\SOFTWARE\Microsoft\Windows\Current\Version\Unistall\QuickTime and 1603 Fatal error during installation.
I've tried several of the fixes listed, but with no success any suggestion would be greatly appreciated.

You don't say specifically what you've tried, but take a look at these web pages:
Error 1406 or 1402 appears when you install iTunes or QuickTime for Windows
InstallShield Error 1603: Fatal Error During Installation
Perhaps those will help.

Quicktime Error during Install/when try to open Itunes says encounterederro

error....
any ideas,fixes?
Thanks

I have the same probelm and I think it's also from upgrading to the free 7.1 version of iTunes.

Error During INSTALL of Application Export File

An error is reported during INSTALL of an application that I am trying to copy (Import/Install) from a "development" Work Space into a "production" Work Space. The production (target) Work Space is on the same HTML DB instance as the development Work Space.
I am receiving the following INSTALL error:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
Following is some pertinent (hopefully) information:
The above INSTALL error takes exception to part of a Region Select (sql) that works fine in the development Work Space.
The common HTML DB (v1.6) instance is on UNIX.
A new Work Space was created on the same instance.
A new schema name was created during creation of the new Work Space. However, this schema does not point to a database. (We were not certain how to setup the schema to parse to our live database.) I will be running DBLINK upon production application startup in order to access the database objects.
EXPORT INFO -
File Format: UNIX (also, tried DOS but received same error during INSTALL)
IMPORT INFO -
File Type: Application/Page Export
File Character Set: Western European Windows 1252
Target Work Space is newly created on the same HTML DB instance.
INSTALL INFO -
*Parse As Schema: COLLIVE17 (Again, this schema does not parse to a database. I intend to use DBLINK.)
*Build Status: Run and Build Application
Please refer to above error message.
Again, any insights or suggestions are appreciated.

Urgently need help! I've read several other Forum messages having a related problem but none having same Install error message.
Again, my Export/Import from development Workspace to production Workspace is successful. The following error is reported when I attempt to "Install" into the production Workspace:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
The "snippet" of Region Sql Select code that relates to the reported error is:
ELSE htmldb_item.display_and_save (5, DECODE (GET_GRADE_B93 (sac.stc_final_grade,sac.stc_verified_grade),'18','AU','1','A','3','B','4','C','7','CR','5','D','46','DR','6','F','47','FW','49','IB','30','IC','31','ID','23','IF','44','MW','9','NC','21','RD','14','RD0','33','RD1','32','RD2','34','RD3','35','RD4','36','RD5','37','RD6','38','RD7','39','RD8','8','S','10','U','43','UD','41','UG','11','W'),'GRADE_'||ROWNUM) END q_v_grade,
HTML DB version is: 1.6.0.00.67. I've also tried to Export/Import/Install the application into the "same" Workspace specifying the same schema, and only changing the Application ID. However, I get the same Install error (see above).
Any suggestions on things to try in order to get application into production is greatly appreciated.
Thanks, Bernard.

WRT160N error during install

I just purchased WRT160N and during the install of LELA there is an error. " Linksys Updater failed to start- verify you have sufficient privileges to start system services" pops up during install. Then it asks to retry and it hasn't worked or close window. Then when says this "Setup for Linksys Advisor has failed "Fatal Error During Install" please check your settings and try again.
Help! I am not computer savy, and don't want to start changing anything and screw it up.
Internet is working on the installed computer (I believe this is called the gateway? not wireless uses the ethernet cable)but I can't setup my wife's new laptop til this is fixed.
BTW this is a cable modem hook up if that makes a difference. I have tried restarting, turning power off as well but still get the same problem every time.
Thanks,
Don

As you have mentioned that your Hardwired computer is able to go online throught the router, and now you are trying to setup your wireless computer. You dont have to run the setup disk on your computer, you can configure all the settings on your Router manually and then make your Wife's computer go online wirelessly..
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Integrity constraint error during install

We have installed htmldb on zlinux from the companion CD.
Because we had an error during install of the flows schema we repeat it (have removed the Flows-User and Flow-Files before) using ins.sql! The apache was still running.
Most of the new installation was fine but near the end we got:
error creating "Procedure arguments" id=122 Ora-01400, cannot insert NULL into ("FLOWS_010500,"WWv_Flows_STEPS","SECURITY_GROUP_ID")
declare
Error at line1
Ora-02291- integrity constraint(FLOWS_0150000.WWV_FLOW_PLUG_ZO_PAGE_FK) violated
parent key not found
ORA-06512 at "FLOWS_01500.WWV_FLOW_API line 4695
...

OK, it's solved:
I finally managed to install Apex 3.0 correctly once I figured out my error.
I was logging in remotely to the server the dadbase was on, then trying to connect to sqlplus using 'sys/password@instance as sysdba' to run the script.
Turns out that the problem had something to do with sys not being allowed to be sysdba when I log in remotely, or that having the username/password and instance info in there made the program think I was logging in remotely and therefore not giving me sysdba privileges.
The root of the problem was running the install .sql without the correct privileges.
Since I found out the database server I was trying to install on uses OS authentication, I remote-connected to the database server as the oracle user, tried to run the install .sql again after connecting to sqlplus: 'conn / as sysdba'
and everything worked like a charm!
~PF :)

Travel Expense - Posting run error - Error during creation of posting run

Hi Guru's,
Look forward for your insights. Here you go with my question.
We are implementing Expense Mgt with Portal with out scope for payroll in SAP. I have set up Expense type, WT, Symbolic A/c to G/L Accounts. Im performing Unit testing currently.
Created Expense trip in ESS, from R/3 tcode PRAP, have approved trip, and settled through Tcode - PREC.
When I try to create posting run under transfer to accounting, I get following error
Error during creation of posting run number (->PR1
Message no. 56840
I'm not sure why this error was popping up. Appreciate your suggestion.
Regards
Praveen.N

Hi,
Since you are trying to make payment through FI, you need to maintain ur employee as Vendor. You can do it through PRAA.
So while creating posting run for this trip, it checks if the respective Vendor for this employee is maintained or not.
Pls maintain it as vendor and see if the errors are still coming.
Rakesh

Solution for Power Saver error during install

Hello,
i have read several topics about the powersaver error during install of this utilty.
i had the same problem even with a clean install of windows XP and i have found the solution.
The error seems to disapear and Powersaver works fine after install of the Hotkey utility :
http://support.toshiba-tro.de/tools/Satellite/sa60/win-xp/hotkey-dd/hotkey-dd-xp-10008sa-du.zip
Hope this post where helpfull.
Greetz DeLorean
[Edited by: admin]

Hi
You are absolutely right. Common modules is a kind of basic application who must be installed first. All other Toshiba tools should be installed after. The functionality of Power saver utility depends also on installed common modules.
Unfortunately I can not give you any kind of advice but in case that there is some error message the best solution is to remove and install the Power saver again. Check also Toshiba download page. Maybe you can find a newer version.
Bye

Errors During Instalation Of Final Cut Studio 5.1

Aloha,
I am having some trouble here!! I am trying to install FCP Studio Pro 5.1 on my mac. I tried to do an upgrade from FCP 4.5 HD on my orriginal Hard drive. The instalation went through its paces & asked me to put in the second disc. I did then it came back with an anoucment that there were errors during instalation & to try again I did & was never able to get it to instal... Getting frustrated I ran diskworior on the drive & tried again no luck... after some time I thought it might be the drive would not let me because there was an earlier version on there.... so any way after some other problems with this drive I decided to completely erase & instal Mac OSX on my second hard drive that has never had anything on it. I made this my new startup disk & upgraded the OS to OS 10.4.9 I then Tried to install FCP Studio Pro 5.1 on this drive.. this time It never got to ask me to put in another disk it came back with the same error during instalation try again!!!!!! So now I am getting ******!! but odly enough Final cut studio shows up in my aplications. When I click on it it gives me a warning that there was an error registering & once I click ok it seems to launch FCP 5.1....... ?? So is it really there or not??? & why is it not installing the other 4 discs??? and to add insult to this I have tried to install iLife 06 & I get the same error!!!! WHY!!!!!!!!!
Another thing.. I installed FCP Studio Pro 5.1 on another Identical computer down the street & it installed no problem!!!!
Can anyone help Please!!!!!!

I would take a different approach.
I would backup the old drive files to an external, and then do a clean wipe and new install of OS, updates and the FCS.
Best way to do it, in my view.

FCP error during install.

I keep getting an error after installing FCP 5.1.1.
It says error during install please try again.
Im using 10.4.7 on my ibook 1ghz 640mb ram.
I know it will work because a friend has installed it on his.
Any one help?

This most often caused by a damaged or otherwise faulty disk in the package. It happens. Try cleaning the disks and then get out your receipt and serial number because your only recourse will be to call Apple for a replacement.
bogiesan

OMS error during install Grid control 10gR2 on Windows 2003

He,
I get this error during install Grid control 10gR2 on a new server win2003.
"oracle.sysman.emcp.agent.AgentPlugIn"
What I see in forums is that I have to stop my listener and continue my installation.
But I still have the same error !!
Can you please help?
Many thanks

There are some guidelines here:
Subject:      OracleAS Install Error When Configuring AS Console Agent - "oracle.sysman.emcp.agent.AgentPlugIn has failed"
     Doc ID:      Note:386308.1
The solution stated is "Check the contents of the hosts of file and ensure that every entry is correct. All hostname / ip addresses have to be valid."
When installing AS 9i R2 there was an issue with the names, those were supposed not to hava a hypen, so may be something was inherited from those kernels.
There is another metalink note that document hosts issues:
Problem: AgentCA: Grid Control Release 2 install fails with java.lang.Exception: 6 during Agent Configuration Assistant
     Doc ID:      Note:358640.1
~ Madrid.

Can't install, uninstall or run QuickTime - help!

About three weeks ago my QuickTime all of a sudden stopped working.
When I try to play something, I get the following error message: "An error occurred inside a plug-in contained on this page".
Then the following message comes up: "The plug-in did not initialize properly".
I get a picture of a film strip with a broken section through it.
When I try to uninstall Quicktime from my computer, I get the following message: "Fatal error during installation".
I can't uninstall it, and I can't re-install it. I can't repair it or change it or remove it from the computer. Everything else on my computer seems to be working just fine.
Any ideas? I appreciate your help!!!

replying to Shisou
I recently installed ACE codec version 6.3.911.0, i had a suspicion (sp) that this is what was causing the problem, but the codec pack is great so i'm hoping there's a work around.
it's our prime suspect at the moment.
the runtime problems arise when the codec packas contain componentry/codecs for earlier versions of QuickTime than the minimum version needed for iTunes to run. the iTunes 7.1.x versions required at least a QT 7.1.5 (up from QT 7.1.3 for the iTunes 7.0.x versions), so we got a fresh round of the codec pack businesses with that.
(now of course, with QT 7.1.6 on the scene, i daresay we might start having some trouble with Codec packs that just contain QT 7.1.5 codecs and componentry.)
the best thing to do first would be trying to uninstall the Codec pack. if QuickTime (and therefore iTunes) is still not running after that, try seeing if an uninstall/reinstall of QuickTime now goes through (without the fatal error). if it does, does QuickTime start working again?

Error Messages when trying to install, uninstall or run iTunes 9

I get the following error message when trying to Install iTunes:
The path C:\DOCUME~1\Frank\LOCALS~1\Temp\IXP206.TMP\iTunes.msi cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'iTunes.msi' in a folder from which you can install the product iTunes.
I search my entire computer for the file but it's not there.
Then, when I try to uninstall the iTunes and start the install from scratch I get another error:
"The feature you are trying to use is on a network resource that is unavailable"
Catch-22, I can't install or uninstall and when I try to run iTunes I get:
"The action is only valid for products that are installed"
Very frustrating but I'm stumped and I don't know how to proceed. Any help would be very much appreciated.

wooooooooo!!! got it working again!! having spent the last 6 hours..no joke six f*cking hours trying to sort it ive finally got iTunes back!!
ok here is what you need to do:
go to the link below and download the Microsoft Windows Installer CleanUp Facility.
http://www.locksleynet.com/2009/06/09/missing-itunesmsi-problem-resolved/
once you have downloaded it, install it and run it from the start menu. once its up and running remove everything to do with iTunes (so iTunes itself, quicktime, bonjour......the lot). Dont worry about removing iTunes completely, all the music is still there when it works again trust me!!
ok once you have removed everything restart your computer, im not sure if this is a must but i did it.
next download quicktime from the apple website (go to the 'downloads' tab near the top. download and install quicktime and restart your computer so the new settings are put in to place ( i think it asks you to restart anyway).
go back to the apple website, 'downloads' tab and download iTunes itself. install that bad boy and you will be up and running with all your library intact!
Hope it works for you mate!

Number of errors during install

i keep getting this error message during install of itunes
the installer has insufficent privileges to access this directory: C:ProgramData\Microsoft\Windows\StartMenu\Programs\QuickTime. The installation cannot continue. Log on as Adiminstrator or contact your system administrator.
i did the right click run as adiminstrator no good
also i get this error message as well
Warning 1909. Could not create Shortcut Apple Software Update.Ink. Verify that the destination folder exists and that you can access it

I fixed the problem by uninstalling all of the itunes and apple components including bonjour. Then, i was able to delete the the program data file \itunes. then, i simply downloaded the new software and voila it worked. I also synced my iphone and it worked just fine! Finally, but what a royal pain in the as_!!!!

QuickTime won't install/uninstall

At home I use a Mac as indicated.
At work, I am running Windows XP Pro SP2. I've been trying to get the latest version of QuickTime to install. I get "A newer version of QuickTime is already installed. This installation cannot proceed while the newer version of QuickTime is installed." First, this is not true, I have QuickTime 7.1. I cannot uninstall QuickTime because I seem to be missing the install package. I've now deleted all the QuickTime files and removed the entries from the Registry. However, somewhere the installer is still finding an installation of QuickTime. I have administrator rights. Does anyone have suggestions?

I ran the Microsoft Fix-It Tool located at http://support.microsoft.com/kb/2438651, as referenced by Dianne 13, and it worked PERFECTLY!
An update to QuickTime would not install on my PC; I kept getting a message that it "ecountered an error". I tried installing the update manually; I was told a newer version was already installed, and the installation could not be completed. QuickTime wouldn't even open; I got the same message about a newer version, so I tried running the uninstaller, both from the Start Menu shortcut and from within Control Panel - neither worked. The uninstaller told me it encountered an error & couldn't continue.
I ran the Microsoft Fix-It tool that Dianne 13 posted the link to, and it uninstalled QuickTime without any problem whatsoever, and the new version of QuickTime was able to then install.
<Edited By Host>

Quicktime errors during install, uninstall, or run

Similar Messages

Maybe you are looking for