Quicktime export drifts from 23.98...That's bad.

Hi, I just got a call from a composer who says that my quicktime with window burn I sent him on DVD has been drifting from 23.98. When I get info on the QT file it says that the movie is playing at 23? It comes from a 23.98 timeline. Is there a way to send out a QuickTime file that has a playing frame rate that matches the window burn without having to send out a self contained QuickTime?
I should say the movie was shot on a Vericam at 23.98.
Thank you.

This may be the wrong forum for this. I'm gonna post this in the QT section.
Thanks.

Similar Messages

Selecting Quicktime Export Conversion from the Export menu kills FCE.

This used to work for me. Since upgrading to SL I've been experiencing the problem of FCE just quitting without an error on the screen when I select the export with quicktime conversion option. I've looked around and I was unable to locate anything that appears to be a solution. I thought I'd add that I found the following error message in the Console Log.
11/15/09 5:01:09 PM [0x0-0xe20e2].com.apple.FinalCutExpress[2441] objc[2441]: Class ProMetadataQTMDStorage is implemented in both /Applications/Final Cut Express.app/Contents/MacOS/../Frameworks/MIO.framework/Versions/A/MIO and /Applications/Final Cut Express.app/Contents/MacOS/Plugins/QTM Reader.bundle/Contents/MacOS/QTM Reader. One of the two will be used. Which one is undefined.
Any thoughts?

Ian and Tom, thank you for your ideas. I'm reluctant to do a wipe and re-install as you can imagine. I use my computer for more than just the occasional FCE project and it would involve a lot of work. I just tried the removal of the preferences and FCE is still not working with the quicktime conversion yet. Export to Quicktime without conversion works fine. Hmmm... I have reinstalled FCE and updated to 4.0.1 but that didn't change anything. Perhaps I'll try uninstalling and reinstalling Quicktime 7 and see if that changes anything - though the error message seems to indicate some confusion in FCE and not quicktime.

How can I export emails from Thunderbird so that I can send the bulk file to my attorney?

I have about 100 email threads that need to be given to my attorney in both electronic form and hard copy. Obviously, hard copy is no problem. But how can I give him an electronic copy of the emails? It seems to me if I just copy the archive, he won't be able to access them.

In view of Matt's comments, and having confirmed that Outlook 2010 is also able to read .eml files, then I'd suggest that this add-on:
https://nic-nac-project.org/~kaosmos/mboximport-en.html
may be useful in exporting multiple files.
How to install add-ons:
http://www.ramsden.org.uk/3_How_to_install_Add-ons_in_Thunderbird.html

Exporting photos from Lightroom that are good enough quality for a photography website.

I am doing a website for a photographer client that need to showcase their images in a rotating gallery that will be about 1/2 the page so pretty big. She gave me all the photos in FULL size which meant that they were excellent quality and looked amazing on my computer at home as I have fast internet and they all loaded up in seconds. Only problem, when I tried it on a different internet source that wasn’t as speedy, they took so long to load that the next one would start, hence no images ever being visible. This is not good as not everyone will have as fast internet as me and it’s pointless if no one can see her work.
She then exported them for web, using the normal settings that she usually would, leaving them around 200-600KB which loads up nice and quickly, but the quality just don’t do the photo’s justice AT ALL!
I am wondering if anyone has any suggestions of the setting to use to export them from lightroom so that the quality is still next to perfect, but they are small enough so that they load up in a reasonable time on the web.
Each photo displays for 5 full seconds before alternating.
Thank you in advance and if you have any further suggestions, I would love to hear them.

You need to use export settings similar to this:
Quality setting should be at least 60, but you can sometimes get away with less. (smaller file size)
But if you need to export a lot of images, do them all at 60, and re-export as necessary. If you for instance see blockiness in a clear blue sky, increase quality until it goes away.
Color space must be set to sRGB.
Set the required size in pixels, using Long edge is quite convenient. Whatever you enter in the resolution box doesn't matter - web browser ignore ppi.
Experiment with Screen sharpening to find the setting that works best. Standard usually works OK, but it depends on the sharpness of the original.
Set Metadata to Copyright Only, this keeps file size down.

Sequence compression setting / Quicktime Export

Is there any advantage to changing the sequence compression setting to "None" and re-rendering before exporting a sequence using DVCAM footage captured from a DSR30 via FireWire? My normal compression setting is DV/DVCPRO.
How about leaving the sequence settings at DV/DVCPRO and changing the Quicktime export setting from "current settings" to "uncompressed 10 bit" or 8 bit?
I'm still getting artifacting when compressing to MPEG2, even with compression markers at transitions and encoding at 2-pass VBR and burning the DVD at 1x.
Any help is greatly appreciated!

I decided to check out the Compressor discussion group - full of near suicides like me bemoaning the gross infusion of MPEG2 artifacting after upgrading to Compressor 2.
Appparently, popular opinion says the VBR feature is faulty and Apple is waiting until mutiny ensues before addressing the problem.
So I have encoded at 1-pass, 7.2 bitrate, best motion estimator, segmenting OFF, using Compressor, as suggested by some kind soul in the group, and then importing into DVDSP.
I then burned the DVD and viewed it on my bigass TV.
NO ARTIFACTING! Plus compressor took SIX minutes to MPEG2 the 40-minute FCP movie. And, yes you can see in the Compressor preview window that FCP has inserted compression markers at all edit points.
So by selecting settings for what Apple terms lower quality output, I get higher quality output in a fraction of the compression time!
I am fearful Apple is hiring enemy combatant programmers, lowering the morale of editors worldwide by making their work look like poo.

How to up the DPI on exported images from Final Cut

Is there a way to export stills from Final Cut that are 300 DPI, I think they are exporting at 72 DPI?
Catherine

DPI is a measure of density of pixels. It tells us nothing about the printed size of the image (width in inches x height in inches)
A 1200 x 900 image @ 300 dpi yields a 4" x 3" image when printed.
That same size (in pixels) image printed at 100 dpi will yield a 12" x 9" print.
The number of picture elements (pixels) is exactly the same between the two prints but the one in 100dpi image are 3x larger - which will yield a softer image when viewed from the same distance as the 4"x3" 300dpi image.
However, if you view the 300dpi 4"x3" print from 2' away and view the 100dpi 12"x9" print from 6' away - they will appear the same.
Discussions of finding meaning in DPI is difficult without knowing how the final will be viewed.
fwiw - I've made poster size prints at 75 dpi that looked just fine when viewed from 10-12'.
x

Last version of keynote do not allow quicktime export

last version of keynote do not allow interactive quicktime export.
I used alot that functionality to give my sales team presentation they uses on their PC.
My workflow is broken any idea on how to get this functionality back???

Thanks a lot, I am still discovering Pages and have not yet gotten a proper sense ao the "lay of the land"

Need some help here on the proper settings for quicktime exporting from imovie that won't degredate the footage from my handycam

need some help here on the proper setting for quicktime exporting that won't denegrate my footage from handycam canon fs200

What are the existing settings iMovie?
Al

TS2865 when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.

when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.
i need to submit this movie for uni project tomorrow.
any help/advice will help . thanks.

According to Crash Analyzer
-50 (QuickTime)
This error occurs when there is corrupt or invalid media in your timeline. Check that the codec used by the file is recommended for use in your editing application.
good luck

Is it possible to encode FLV from FCP or Quicktime export?

I am using Final Cut Pro 3 and would like to export FLV movies either directly FCP timeline or from Quicktime export.
I have used systems with Adobe CS3 installed and they have a quicktime plug-in for encoding.
However, I've just purchased Adobe CS5.5 Production Premium and I have not gained that functionality.
Going to Adobe support is going to cost me more money (I would have thought that spending over £1700 would give me a little help).
Can anyone tell me how to get export from FCP with what I have?
Do I have use CS3 or CS4?
Or do I have to export a quicktime movie from FCP then use Adobe Media Encoder to create FLV files?
Thanks for your help.
Rod

Hi Rob,
Thanks for your info. I'm already evaluating squeeze, but the trial version doesn't have the plug-in. I would have to pay for it to check it out. As I'm not planning to pay another $600 I suppose I'll have to go with the export from FCP. However, I might just save a reference quicktime movie.
Rod

Exported mixes from STP drift out of sync

STP seems to have a mind of it's own. Mixes that use to export fine are now drifting out of sync over time, about 2 seconds over fifteen minutes. If I export the mix either directly from STP or through Compressor, it drifts.
However if I export with video (through Compressor), the audio is in sync properly.
Does anyone on the STP team have a clue as to what this might be? It's driving us nuts!
Michael Buday

Thanks Gavin. I often do the same thing, export projects with a large number of tracks through Compressor because exporting directly from STP is just too unreliable (missing EFX, keyframe levels/pans missed entirely, etc.)
I tried exporting as usual through Compressor using the standard 48:16 preset, but again - drift. When I then switched to PRESERVE VIDEO with the same audio settings, the sync was fine. This is a workaround, but a real pain in the butt because I then have to extract the audio out of the .mov file. Not rocket science, but just too many steps to do all the time.
The weird thing is, this has happened only three times out of about 50 projects, but once it occurs, it's as if the project is corrupted in some way and it never exports properly again.
Michael Buday
G5 Dual 1.8 GHZ Mac OS X (10.4.3) FCP 5.03, STO 1.01

Quicktime export from FCP universal, audio export function

Hey there, I just recently bought the 17 inch mac book pro and did the crossgrade swap to the latest version of FCP studio.
Doing my first complete video edit and DVD project and am at the export stage.
I am doing what I normally do on my dual 2.5 g5 and setting and IN point and an OUT point in FCP and exporting using quicktime.
Just as the defaults, (I do this and have done this dozens and dozens of times)
I do this, then I import that file (after FCP is done into compressor and go from there)
we all know the export using compressor thing isnt ready for primetime..
anyway, doing this and after the first dialgo box is done and it seems the whole thing is done...then a box comes up saying its exporting AUDIO and its going to take 4 hours!
I didnt choose this extra step, the default quicktime export dealy (not "using quicktime conversion) had all this covered I thought...I mean, it has every other time on the OTHER computer)
I canceled this and checked my resulting exported file (the quicktime one) and all the audio and video is intact..
but the process I cancelled bothers me...any ideas?
thanks so much

> sorry I am all over the place info wise maybe
No problem - we all find it hard to explain things clearly when we're frustrated by problems like this!
Well that's strange - but at least it's clear what's happeneing now!
I'm at a loss really but if it were me, I'd trash the preferences and repair permissions, then if that didn't work, I'd create a new project in FCP and transfer the clips over. Sometimes this can iron out strange bugs.
Failing all, I'd create a new ID on my Mac and work from there - but if this works, then Jerry's advice regarding the clean install is a must, really.
Another thing I'd try is exporting direct through Compressor - it's a wonderful tool and you really should get to know it. It would be worth using Compressor to export a QT movie to see whether it makes any difference.
Is the full project on the G5 as well as the MBP?
Andy
Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.1. Shake 4.1. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

Quicktime export from FCP quality bad on Windows Quicktime

Hey all,
I believe this question has been brought up in a previous post (http://discussions.apple.com/thread.jspa?messageID=2932763&#2932763 "Quicktime export from FCP quality bad on PCs"), but it was never answered. So I captured video using final cut pro using the following capture preset:
Sequence Preset - DV NTSC 48 kHz
DVR-TRV900 using NTSC
29.97 fps
DV - NTSC at Best Quality
24 bits per pixel
720 by 480
When I view the video under quicktime for mac, it looks good. However, when I view the content under quicktime for windows, the quality is noticeably degraded. For instance, when I looked at the video clip in mac, there was a text overlay that displayed the time and date. When I look at it in Windows quicktime, the quality has degraded to an extent that the numbers are no longer readable. Besides the overall quality difference in playback between mac and pc quicktime, there are no other noticeable artifacts. Also, I tried viewing the video in VLC (video lan client) on windows, and it looks perfectly fine.
Ray

seems like this is a PC Quicktime issue rather than an FCP issue, you may have more success in resolving the problem if you post your question on the Quicktime for Windows forum
that said, you might want to check the Quicktime Player preferences on your PC (Edit > Preferences > Player Preferences)
make sure you have checked the "Use high quality video setting when available" checkbox
good luck
Andy

How do I export apps from my iPhone to my iMac? I received notice that there is an update now for the iOS in my iPhone, but that I first needed to transfer some files (apps?) from the iPhone to my iMac. But I cannot find anything in the Help menu on this.

How do I export items from my iPhone to my iMac? Apple sent me a message to my iPhone, saying that there is an update for iOS, to 6.1.3, but before I install this update, I should first transfer some items from the iPhone to my iMac; otherwise I would lose these items (apps?)
I have two problems with this: 1) I don't know what files I should transfer, and 2) I don't how to transfer from an iPhone to an iMac (but do know how to download apps from iTunes Store to my iMac, and then to my iPhone.
Very confusing! Any help/suggestions gratefully accepted.
DBH

Move the cursor to the very top of the computer's screen, click on File, and choose Transfer Purchases. If you need to authorize the computer, the command is in the Store menu.
(79537)

I would like to use slideshow in lightroom to export my video as a full screen 1920x1080 video with text overlays. I am using text overlay in lightroom as it reads from the metadata that is easy for me to input in the library screen. When i export from

I would like to use slideshow in lightroom to export my video as a full screen 1920x1080 video with text overlays. I am using text overlay in lightroom as it reads from the metadata that is easy for me to input in the library screen. When i export from lightroom slideshow and choose the 1920x1080 resolution the end product is a very small video in the middle of a black background. i have double checked and do not have any borders turned on. Another option would be to export from the library but lr mogrify does not seem to put text overlays on video either. Any input would be welcome.

I dont understand anything you said in your post.
Do you have a specific question about video production?
The forums are for individual technical or creative issues that users have with video production. I am sur someone will be able to help you, but and to get a response it is best to ask a specific question.
Is this about a technical problem you have or something about setting up a web site? If its the latter this is the wrong forum.

Quicktime export drifts from 23.98...That's bad.

Similar Messages

Maybe you are looking for