Quicktime exports only part of my movie to WMV

I'm trying to export a QT to WMV using QT conversion, but it will only convert about 45 seconds of the movie. Any ideas?

I would bet that you're using Flip4Mac in trial mode for that conversion process. You'll have to buy the license from them for $49. to get the restriction removed...it's worth it, if you do this sort of thing a lot. Go to the F4M preferences and click on the upgrad tab.

Similar Messages

How do I export only part of a pdf?

how do I export only part of a pdf?

Hi eannablack,
The only way to export part of a PDF is to remove the pages that you want to export. And to do that, you need Acrobat. You are welcome to try Acrobat for free for 30 days. For more information, see www.adobe.com/products/acrobat.html.
Best,
Sara

Exporting only part of the Sequence

I do not have any in and out points on my sequence, but when I export, only part of the sequence exports. I have chosen numerous encoding presets, tried placing in and out points at the beginning and end, but it still does not work.

I've tried exporting through DV NTSC and DVCPRO720p60.
Say if I had a 10 minute sequence, then it'd only export 3/4th of it.

How to export only part of animation?

In the case of a big animation (tens of thousands of frames), is there a way to render (using Export Movie) only part of the animation, e.g. frames 100-500 and nothing more? That way, loss of time would be reduced.

Playing around with this a bit I found another method in addition to the one you described. I found I can mark part of the sequence with the work area bar and then use Export. The Export screen has an option to send the entire sequence or only the part under the work bar. Then I imported it into Encore and since it was exported with final disc settings Encore didn't have to encode it.
But I think I will send in a feature request. Hopefully a lot of other people will also ask for this.
Thanks
Steve

How do I export ONLY audio from a movie and edit it in garageband?

I can separate the audio from the video just fine, but when I try to export only the clip of audio they make it nearly impossible. It keeps wanting to export the entire movie.
I never had any problems with this with the older versions of iMovie. Do I have to seriously bust out my iBook G4? I'm using version 10.0.2.
Thanks in advance.

Open the video in QuickTime Player.
Then choose: File --> Export --> Audio Only...

When I try to move an object in Illustrator CS3 only part of it moves, so the object "stretches".

This doesnt always happen, but I cant figure out what I do differently when I am able to move the object successfully. Obviously these are multipart objects. My workaround is to copy the object an paste it...then most times it moves correctly.

mridude wrote:
Yes. I usually select the group of objects with the white arrow by dragging around them. Then change to the black arrow to move them.
Obviously you're not 'capturing' all the anchor points... so, you're getting only part and not the entire object. Use the black arrow to select.... you'll get the whole object... then drag or use the Transform tool to move it.

Using themes in only part of a movie

Is it possible to only use a theme in part of a movie? I have some old photographs and I want to use the 'photo album' theme. But I want to incorporate other things in my movie as well. Things that don't relate to the photos, but will be video clips from other sources as well as various titles.

Yes, go to File/Project Properties/General tab and set the theme you want, but uncheck "automatically add titles and transitions".
Then you have total control over the Theme elements you use and when the transitions are applied by dragging them in only when you want them.

Export only part of project,timeline

Is there option to export only few clips directly from project,timeline?.. When I go to share I can share only entire project.
Or I must duplicate project, and delete everything what I don't want to share?

Another method is to use the Range Tool (R key).
Select what you require and only the selected section will export.
Al

Exporting only part of an iTunes library

My disk is full. I need to get my iTunes library off of it. Can I only export part of the library, say just the videos or music files, or do I have to export the whole thing?
Is it possible to export it to a network disk so that it will play over the wifi network?
Thanks,
Ira

For anyone who has this problem in the future - I have a solution!
I used iTunes to burn the playlist to two DVDs... then I imported the songs over on my MacBook.
It took about an hour to do all the burning/importing... but now I have all the songs that I want. =)

Why is QuickTime export only using 2-4 cores?

I'm trancoding video in QuickTime Player 7 (to H.264 and AAC), NTSC dimensions and good quality. It's taking quite a while, but it should be going faster for what I have. I have an 8-core Mac Pro, but the export process only ever goes a little above 300% CPU usage, meaning that it's using 4 cores max. My CPU isn't maxed out by anything else, and I have 3GB of free RAM.
Transcoding video is supposed to be a totally parallel task, but it's not using all of my cores. Any explanation or fix for this?

Premiere Pro and Adobe Media Encoder will take all the resources it needs to do it's work. If it's not using all available resources, it's because it just doesn't need them. One possible reason for this is you're using an effect that's just very slow.

IMovie '08 exports only part of the project

I use iMovie '08 (7.1.4) and I want to export a 28 min. project to .avi.
After the export, without producing an error message, it turns only the first 4 minutes or so have been exported. The quality of those 4 minutes is fine, but I have no clue why it does not export the rest:
- I can't find anything wrong with the project or the files in it; the last frame of the (failed) export is in the middle of a fragment.
- I have about 28 GB of free space on my HD so that shouldn't be a problem (I even tried exporting to my external HD with 600 Gb free space, same problem)
- I export via QuickTime and use the same settings I always have and which worked fine until now.
Anyone got any clue what the problem could be?

In my case, the culprit was backups and disk-related software eating large amounts of CPU.
I recently ran into this problem with a very small project. Even after locking all tracks, I could not record all the way through the project without getting "project not played".
One pattern I noticed was that I could never get through the whole project when Time Machine was backing up. So I turned off TM and tried again.
Even then, I couldn't get all the way through. Running Activity Monitor, I could see that WD's disk software (came with the My Book drive I use for backup), would periodically consume a big chunk of CPU, even though I wasn't using the WD disk... even if I dismounted the drive. So I uninstalled the WD software.
With this change, Activity Monitor shows ~0% CPU. TM can still give problems, so I shut it down when I record.
Now GB runs fine, even with multiple tracks unlocked.
Moral: use Activity Monitor to make sure something isn't chewing up too much CPU. It may be an intermittent load, which makes it harder to see. But a big burst in non-GB CPU activity can stop GB, even if the burst is brief.
~2010-vintage iMac, 8GB RAM, GB '11

HT1657 itunes will play only part of the movie i rented and it just stop! what do i do?!

but for real. how can i watch the rest of my movie? it's like they ripped me off!

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

Quicktime export to dv format (preferably PAL)

Hmmm,
I just read Karsten's post and I think I already know the answer but ...
I really need to be able to export a slideshow from iPhoto to DV PAL format. For some reason I can't understand, iMovie produces really bad moire interference patterns with my mum's still photos in the Ken Burns effect, but iPhoto doesn't. I can work around this if I can just do the photo animation and transitions in iPhoto then export to iMovie to add captions, titles, music, voice overs and chapter markers.
The highest quality export I can find is 640x480 which is virtually useless to me. Karsten's post suggests that the frame rate is for NTSC and I need PAL.
I was certain this was possible in previous versions of iPhoto - am I correct.
Why does Apple keep taking away the things I want - firewire, replaced iMovie HD with iMovie 08 (yuck!), export options (what have I missed?)
Anyway, I'm hoping someone can point me at a workaround that isn't too complicated for my mum.
Steve

Neither iPhoto 4 or 5 has a PAL option under the Quicktime export, only size options. Which iMovie version are you having trouble with? If it's V7 try downloading and usingiMovie HD 6 which has been made available to iLife 08 users who want the many features of V6 that were dropped out of V7.
An alternative that I suggested in the topic with Karsten was using QT Player to convert to PAL after exporting out of iPhoto. It creates a larger file but if you're going into iDVD it will be encoded again. The extra encoding may lessen the image quality but you'd have to give it a try, save the iDVD project as a Disk Image (File->Save as disk image) and play the disk image with DVD Player to see how the encoding went before committing to disk (burn with Disk Utility at the slowest speed available).
Happy New Year
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

MOV to WMV conversion problem

I have quicktime pro and am trying to covert quicktime mov files to wmv files. The conversion happens, but when I play the wmv file I find that only part of the mov file was converted. Any ideas on how I can fix this?

when I play the wmv file I find that only part of the mov file was converted. Any ideas on how I can fix this?
QT Pro is using the free demo codec (I assume you have the free Flip4Mac player component installed). To export full conversions you must purchase the QT to WMV export codec that comes in the $49 package. (The $29 codec only converts from WMV to QT.)

Exporting a part of a sequence to Quicktime movie!

Is there a way to export a part of a sequence to quicktime movie in FCP?
I come from Premiere world. In premiere there is a work area bar in the timeline; During AVI export it can be set to export clips within work area. That kind of ability seems to be missing in FCP. When I try to export, its exporting entire sequence. Is there a way to limit export area within a sequence?
Thanks for your help.

Thanks henners, I just figured that out myself. Thanks for your help anyways.
Another question, Is there a set-up that I can make so that the clips that are exported to quicktime movie, automatically imported into the project. I know I can manually import the clip. Again, Premiere had the ability to do this. I looked through the preference set-up, didn't find anything.
Thanks.

Quicktime exports only part of my movie to WMV

Similar Messages

Maybe you are looking for