Quicktime fails to install when updated or downloaded fresh

My computer says I am running Quicktime 7.3. However, it doesn't work at all, and just shuts down as soon as I open it up. I can't watch any of the videos I have bought in iTunes because of this.
So to correct the problem, I tried to update it from the 'software update' but it repeatedly fails on installation and asks me to try again. No luck.
So I downloaded a fresh version of 7.3 from the Apple site and the same problem. I have downloaded over and over again, and the downloads are always successful but *every time* installation fails at 21%.
I have updated the system software, updated to the new iTunes, and repaired permissions. I tried downloading Quicktime 7.2 in case it was a problem with the 7.3 download. It also failed at 21%.
Does anyone know if I will have to completely remove Quicktime in order to do a fresh install? If so, how do I do this?
I would be so grateful for any help.

"The feature you are trying to use is on a network resource that is unavailable.
"Click OK to try again, or enter an alternate path to a folder containing the installation package 'AppleSoftwareUpdate.msi' in the box below."
Then when I click Cancel it says "An installation package for the product 'Apple Software Update' cannot be found. Try the installation again using a valid copy of the installation package 'AppleSoftwareUpdate.msi' "
that's absolutely perfect, thank you.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Does it go through properly this time?

Similar Messages

Clients failing to install Microsoft updates

Almost all of the ConfigMgr 2012 R2 Clients are failing to install software updates.
When I look updateshandler.log I see lot's of errors:
Deployment status shows:

0x87d00315 = The CI version info data is not available.
You will see a similar problem here. It required assistance from Microsoft CSS to resolve.
https://social.technet.microsoft.com/Forums/en-US/2261aead-4566-4912-b5c0-72ea733252f3/windows-2003-servers-software-update-issue-with-sccm-2012-sp1?forum=configmanagersecurity
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Server 2012 (not R2) RODC fails to install Windows Updates

Good morning all
Since around October, our 80-odd 2012 (non-R2) RODCs have been failing to install windows updates, rolling them back on reboot. Patches that don't require a reboot are fine. The short version is, please log a call with MS and reference this thread, if you're
having this issue as currently they're saying they won't fix this!!
Our product support group opened an official case and reported this with Microsoft and they've found the cause. PLEASE NOTE however, that this relates to RODC and ALL patches failing, not just 3000061 on non-RODC.
There was some chat relevant to this as originally it was thought KB3000061 was to blame, and a few other people had had the same issue there (see links at the bottom). I think however, that this issue now stands alone as any patch we try to install will
fail.
000093 2015-01-23 20:18:30, Info CSI 00000015 Begin executing advanced installer phase 38 (0x00000026) index 4 (sequence 43)
000094 Old component: [ml:350{175},l:348{174}]"Microsoft-Windows-Web-Services-for-Management-Core, Culture=neutral, Version=6.2.9200.16384, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=wow64, versionScope=NonSxS"
000095 New component: [ml:350{175},l:348{174}]"Microsoft-Windows-Web-Services-for-Management-Core, Culture=neutral, Version=6.2.9200.17100, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=wow64, versionScope=NonSxS"
000096 Install mode: install
000097 Installer ID: {118ca598-79a0-4297-953d-e82183960fd2}
000098 Installer name: [13]"Group Trustee"
000099 2015-01-23 20:18:30, Error CSI 00000001@2015/1/23:20:18:30.673 (F) CMIADAPTER: Inner Error Message from AI HRESULT = HRESULT_FROM_NT(STATUS_NOT_SUPPORTED)
000100 [
000101 (null)
000102 ]
000103 [gle=0x80004005]
000104 2015-01-23 20:18:30, Error CSI 00000002@2015/1/23:20:18:30.673 (F) CMIADAPTER: AI failed. HRESULT = HRESULT_FROM_NT(STATUS_NOT_SUPPORTED)
000105 Element:
000106 [372]"<groupTrustee xmlns="urn:schemas-microsoft-com:asm.v3" name="WinRMRemoteWMIUsers__" description="Members of this group can access WMI resources over management protocols (such as WS-Management via the Windows Remote Management service). This applies only to WMI namespaces that grant access to the user." type="User" enabled="true">
000107
000108 <members></members>
000109
000110 </groupTrustee>"
000111 [gle=0x80004005]
000112 2015-01-23 20:18:30, Error CSI 00000003@2015/1/23:20:18:30.673 (F) CMIADAPTER: Exiting with HRESULT code = HRESULT_FROM_NT(STATUS_NOT_SUPPORTED).
000113 [gle=0x80004005]
Cause:
The installer uses SAM API calls to manage the group. It always connects to the local SAM instance. The component also handles an uninstall task in the same function. On uninstall the group is being deleted.
So the SAM handle is requested with "Create Group" and "Delete" access.
The error happens because a RODC does not allow any changes and thus returns STATUS_NOT_SUPPORTED.
More information about the prevent from accidental deletion feature please refer :
http://technet.microsoft.com/en-us/library/cc773347(v=WS.10).aspx
http://technet.microsoft.com/en-us/library/cc739350(v=WS.10).aspx
Recommendation:
This is a Bug in the RODC running on server 2012, However you may do an in place upgrade to Server 2012 R2 and then proceed with the installation of the patch.
The bad news is this is fixed in 2012 R2 with a hotfix - but it isn't fixed in 2012 and it won't be because.. they've only had one official report logged. And that was by us. So, if you want this fixed, you need to start logging this with MS now.
What I can say just now is that this isn't related to the registry fixes with WinEVT we've all been trying, it's NOT limited to 2008 that has been upgraded in place to 2012 (our product support group replicated it in the lab with a brand new 2012 promoted
to RODC) and it IS only happening with RODC. Possible fix might be to make your RODC RW for a bit and install your patches then.
Background reading:
https://social.technet.microsoft.com/Forums/en-US/f77691d8-a9d0-4714-98ad-71665cfa8965/kb3000061-fails-to-install-on-server-2012?forum=winserver8gen
https://social.technet.microsoft.com/Forums/en-US/70219bcb-36a8-466e-900b-cbf390db38d2/failure-configuring-windows-updates-reverting-changes-postreboot-status-0x800f0922?forum=winserver8gen

The error indicates that IIS is returning a "404 not found" error back to the Windows Update Agent. That might mean that you need to specify the correct port that WSUS is listening on, e.g.:
WSUSServer=http://yourserver:8530
Thanks,
-Michael Niehaus
Senior Product Marketing Manager, Windows Deployment
http://blogs.technet.com/mniehaus
[email protected]

I've just reformatted my pc, reinstalled master collection cs5, and now it won't install the updates it downloaded, do we have any fix for this?

I've just reformatted my pc, reinstalled master collection cs5, and now it won't install the updates it downloaded, do we have any fix for this?

you can update manually, http://www.adobe.com/downloads/updates/

Geolocation update returns an error: "Failed to install Geolocation Update. Please contact Sourcefire support."

An attempt to install a version of the Geolocation Database (GeoDB) that is already installed returns the following error:
Failed to install Geolocation Update. Please contact Sourcefire support.

This issue is fixed in Sourcefire software version 5.3. If you are experiencing this issue, please update the software version of your Sourcefire appliances to 5.3 or greater to resolve this issue.

Ipod touch stuck in waiting mode when updating or downloading an app?

Ipod touch stuck in waiting mode when updating or downloading an app?

See here: https://discussions.apple.com/thread/4233381?tstart=0
B-rock

Apple update keeps telling me I need Bonjour installed but, fails to install. when I Download and install manually I get the massage that I already have a later version. How do I get apple to recognize its already there?

Apple update keeps telling me new software is available "Bonjour for Windows 1.0.6" When I try to install it, it fails. When I manually download and install I get the message I already have a later version. How do I get apple to recognize it's already there?

When I manually download and install I get the message I already have a later version.
Doublechecking before proceeding. Do you also get that message if you try to install the most recent version of Bonjour?
(There's a few different possibilities afoot relating to damaged installation configuration information for Bonjour on the PC here ... fingers crossed, the answer to my question will help narrow down the possibilities.)

Adobe Application Manager fails to install when I try to download CC

I have tried to download CC but keep getting the error messate that Adobe Application Manager fails to install. How can I download CC?

For Windows 8, 64-bit,
I Renamed OOBE to OOBE_old located at
C:\Program Files (x86)\Common Files\Adobe
I then relaunched the Browser
I went to https://creative.adobe.com/products/creative-cloud
I Signed in with Adobe ID and password.
I clicked on the download button but absolutely nothing was happening.
You will find below a video showing what happens when I click the download button when OOBE is not renamed.
http://www.youtube.com/watch?v=Q9NlOVXrx4k
Pictures
I hope this bug will be fixed promptly because all my CC applications are now paid for a while and not yet presently accessible and useable.
I feel, in all fairness, until the problem is fixed, Adobe should provide a credit.
Thanks for your understanding.

Why does app mgr "fail to install" when it tries to update itself?

I have reinstalled the app mgr, as instructed on the CC web site, as it was supposedly corrupted (although it worked fine a couple of hours ago). Whenever I try to download PS CC, the app mgr goes through trying to update itself and "fails to install," so I can't even begin to download any other app. (Running Windows 7 on a Dell laptop, 64-bit. I have several CS6 apps.)

Arpit,
There is no app mgr in the Control Panel list of programs; it is gone. (Of
course, I've purchased the LR 5 upgrade, and it is not on the list either,
though it is installed, not from the Cloud, and seems to work.) There is a
newly downloaded app mgr 7.0 shortcut on my desktop, but it can't find the
program itself. There's an app mgr updater that runs its course; but since
the app can't be found, it's hard to know what it is updating. Trying to
download anything (even just the Creative Cloud desktop connection) from
the web site doesn't work--clicking a download button produces nothing at
all, not even an error message.
CC Cleaner does not give an option to clean the CC items without also
working on CS6 apps. I do NOT want to risk losing or corrupting my various
CS6 apps or the data associated with them.
My Cloud files are still fine, but I can't upload anything new or download
anything that's there.
There really needs to be a solution to this situation that does not require
large transfers of data or the risk of losing older (and functioning)
programs.

T60 updates fail to install,System update fails to start

T60, 1953, WIndows XPPro. Can download updates but they do not install. Also, when attempting to download new System Update 3.14 it states SUSstart.exe fails to "finish" and thus cannot complete the installation.
Have disabled firewalls, antivirus, have searched forums and have re-started relevant services.
Something simple needs to be changed!! HELP!!

Hi,
go to :
%ProgramFiles%\Lenovo\System Update\session
and check whther you have following folders there :
system
temp
billboard
and if also following files are present:
QuestResponse.xml
updates.ser
If all is present, then jsut do following:
- delete System update + make sure, that also following folder then does not exist: %ProgramFiles%\Lenovo\System Update
* reboot the machine
- install new version of System Update
Let me know if that makes any change.
Rgrds

Failing to install windows updates

I recent completed a facory reset of my G580 and managed to install a few updates; but after that it says theres 101 updates and it will download them but after the restart it says fails to install, reverting changes.
I've tried running the windows troubleshooter which does find faults and fixes them but it makes no difference.
Thanks in advance.

can you list here what are the updates that failed? In my case all security updates and .NET framework updates kept failing. I asked around and they told me that after I have installed the updated I should check the updates history and if I find some of them failed , I should run the troubleshooter again . I ran the troubleshooter again , and it worked . It literally took me 2-3 weeks to finally update. There is sometheing really wrong with windows updates and the only way to fix this problem is the solution I told you in last reply.
This was the question I asked on microsoft community : windows updates.
If you still can't find the right solution , then you can ask your queries there also.

Windows 8 fails to install EVERY update, error code 0x800f0922

So I had to do a System Repair thing where Windows would repair itself and removing all my apps but keep my documents, photos and music etc. So I was reinstalling every program again and also wanted to install the updates.
But I ran into 0x800f0922 error code and I couldnt install them. (I run Windows 8.1 Pro) I was trying to install Adobe Photoshop but couldnt continue cuz .NET framework 3.5 was required. But after trying to manually download + install I got
the same error (0x800f0922). I've tried almost every cmd command but couldnt fix it. (im a kinda noob on it anyways)
Any help would be appreciated!

I did that and it told me it succeeded, but I also tried to manually install net framework with DISM but gave me the same error.. And I reinstalled Windows trying the repair, refresh and reset options, nothing helped. I did not yet tried a clean installation.
CBS Log:
https://www.dropbox.com/s/qgzhhmlr0nqd7es/CBS.log
Windows Update Log:
https://www.dropbox.com/s/hpakr5t2290pbpy/WindowsUpdate.log
If the links dont work, try these:
CBS Log:
https://paste.ee/p/6aALS
Windows Update Log:
https://paste.ee/p/KzbIq

Windows update fails to install windows update KB3038314 x64 for windows 7 x64 for ie 11 update april 14 2015.

hi
i know ms is trying to fix the issue with this update for ie 11 but when will this be as this is leave my computer open to hackers etc when will this be be resolved

Hi,
Could you let us know what's exact error message when you attempt to install this update?
And then I would like to suggest you refer to this guide to troubleshoot firstly:
You can't install updates in Windows Vista, Windows 7, Windows Server 2008, or Windows Server 2008 R2
https://support.microsoft.com/en-us/kb/2509997
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Failed to install Important Updates

Error Code 0x8007045D afetr failing to install updates via SCCM/SMS

Error Code 0x8007045D afetr failing to install updates via SCCM/SMS

Why is Google chrome installated when updating Flash?

I think users can decide for themselves which browser they prefer to use. We do not need Adobe to automatically install Google Chrome when updating Flash. While there is an option to uncheck if you install from the Website, there is no choice when updating.
We don't need this Big Brother, we know best attitude.

I NEVER use the "updater" because I already have all the software I want and need. Use the "offline" FULL installers:
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
NOTHING in those but Flash Player.

Quicktime fails to install when updated or downloaded fresh

Similar Messages

Maybe you are looking for