Quicktime file not playing correctly

My professor at school gave me a quicktime file link to view. When I open it plays but it skips and is unclear.
Here is the link: http://www.onlinecampus.org/ref-mov/dept/arc/jorgensen/AETop10-sd.qtl
Any help would be greatly appreciated. Thanks!

rtsp://onlinecampus.org:8000/dept/arc/jorgensen/AETop10-sd.mov
A tiny (dimension) file served by streaming server software. H.2264 video codec at a very low data rate.
No reason for it to play poorly.

Similar Messages

HELP....AVCHD / MPEG files not playing correctly!

I have been trying to download video that was shot with the new Sony FS100 camera that I'm told are AVCHD or MPEG files to my older Adobe Premiere Pro 1.5 timeline, but they are not playing correctly. When I reverse the field dominance, the image plays better but the sound is strange (I was able to speed the sound to 450% and it worked better, but then the balance of the sound from the clip is lost somewhere.).
Any suggestions to make these files play and work correctly? I tried converting them to AVI files but that showed up completely black on the timeline! Anything I've tried either affects the video or audio negatively! I try either makes the image play or stutterThis was shot in regular SD format, NOT HD, so they should be able to play on a standard timeline. Can anyone suggest anything to help please? Much appreciated!

Thanks for your reply, I ran it through Media Info. Here are the results:
Container & general information:
MPEG-PS: 290 Mib 4min22s
1 Video stream: MPEG video
1 Audio stream: AC-3
First Video Stream:
8833 Kbps, 720*480 (4:3), at 29.970 fps, MPEG video (NTSC) (version 2) (Main@main) (Custom Matrix BVOP)
First Audio Stream:
256 Kpbs, 48.0 Khz, 16 bits, 2 channels, AC-3 (DVD-Video)
Please let me know where to go from here. Thanks so much!
Date: Fri, 11 Nov 2011 10:50:15 -0700
From: [email protected]
To: [email protected]
Subject: HELP....AVCHD / MPEG files not playing correctly!
    Re: HELP....AVCHD / MPEG files not playing correctly!
    created by Ann Bens in Premiere Pro CS4 & Earlier - View the full discussion
Welcome to the forum.A screendump of what these SD files exactly are would be very nice.Run them throught Media info.http://mediainfo.sourceforge.net/en
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4020725#4020725
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4020725#4020725. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Embedded QuickTime files not playing sound

I'm having trouble getting older, embedded QuickTime files to play properly. Many of them do play but without sound.
An example:
The embedded QuickTime files in questions 6 and 10 here...
http://www.linguistics.ucla.edu/people/schuh/lx001/Web_Quizzes/Quiz_07/07web.htm l
...do not play sound.
When viewing the files directly...
Example: http://www.linguistics.ucla.edu/people/schuh/lx001/Web_Quizzes/Quiz_07/07_Quiz_m edia/0706_split_brain_red.mov
...the sound plays properly.
I have done a bit of playing around on a few different machines and have found the following:
2009 MacBook Pro: video and sound play correctly in Safari and Firefox
OS X: 10.7.5
Safari: 6.1.6
Firefox: 36.0 with QuickTime Plugin ?
QuickTime 7: ?
QuickTime X:10.1
2009 Mac Mini: video and sound play correctly in Safari and Firefox
OS X: 10.8.5
Safari: 6.2.3
Firefox: 33.1 with QuickTime Plugin 7.7.1
Firefox: 36.0.1 with QuickTime Plugin 7.7.1
QuickTime 7: 7.6.6
QuickTime X: 10.2
2011 Mac Mini: video and sound play correctly in Safari and Firefox
OS X: 10.9.5
Safari: 7.1.3
Firefox: 31.0 with QuickTime Plugin 7.7.1
Firefox: 36.0.1. With QuickTime Plugin 7.7.3
QuickTime 7: 7.6.6
QuickTime X: 10.3
2011 iMac: no sound in videos, improper display of video with menu in both Safari and Firefox
OS X: 10.10.2
Safari: 8.0.3
Firefox: 36.0.1 with QuickTime Plugin 7.7.3
QuickTime 7: 7.6.6
QuickTime X: 10.4
2011 Mac Pro: no sound in videos, improper display of video with menu in both Safari and Firefox
OS X: 10.10.2
Safari: 8.0.3
Firefox: 36.0.1 with QuickTime Plugin 7.7.3
QuickTime 7: 7.6.6
QuickTime X: 10.4
Is this a Yosemite issue? Not being able to play older QuickTime 7 files properly? I'm not sure what else the issue could be since everything seems to work fine in 10.7, 10.8, and 10.9 (unfortunately, I have been unable to test this in 10.10 or 10.10.1). Maybe I'm overcomplicating a simple issue? Any help would be greatly appreciated.
Thanks!

Is this a Yosemite issue? Not being able to play older QuickTime 7 files properly? I'm not sure what else the issue could be since everything seems to work fine in 10.7, 10.8, and 10.9 (unfortunately, I have been unable to test this in 10.10 or 10.10.1). Maybe I'm overcomplicating a simple issue? Any help would be greatly appreciated.
Some very interesting observations which peaked my own curiosity due to on-again, off-again nature of the playback. I suspect this is either a "bug" or represents content handling changes that are currently in the process of "evolving." Not a web site programmer so I used iWeb to run some contrast-comparison tests on how audio was handled by the plug-in software when directly accessing the content by its URL and via the page embed strategies. My results mirrored yours in that:
1) All legacy codecs tested (A-Law, IMA, QDM2, QPV, and u-Law) in an MOV file container played correctly in the QT 7 player.
2) The same files all played correctly when content was accessed by the plug-in software directly using the URL reference.
3) None of the files containing legacy audio compression formats would play audio using the plug-in software using a web page embedding strategy.
4) An MP4 (H.264/AAC) version of you original clip played correctly in all instances.
5) Replacing your QDM2 audio track with an AAC audio track in the original MOV file allowed the file to play correctly in all instances.
Based on these observations, I suspect the problem is in the way the software is currently programmed to handle (or rather ignore) the embedded strategy content. However, as you indicated, it is probably time to update your files. Not only did the H.264/AAC version of your original file play in all instances, but it used less than 45% of the file space/bandwidth for the settings I employed as compared to your original "0706_split_brain_red.mov" original file.

I tunes update 10.5 and music files not playing correctly

After I updated iTunes to 10.5, a vast majority of my music files do not play correctly. When they do play, they sound as if they have been super compressed and I cannot figure out why. I have un installed/re installed, checked all of my drivers and even scanned my library for viruses. Is there anyone who may have any info that may help fix this problem? I would be eternally grateful.

I have just downloaded a free program called burn and it burns music perfectly and yet itunes still wont work and comes up with the same error report as above so i do hope this helps apple to fix the bugs in there latest 10.5 itunes update.

Why are certain sound files not playing correctly in iTunes?

I have had iTunes for years and have never had prolonged or unsolvable problems with anything playback related until now. I recently acquired some music, and it plays perfectly when I use WMP. When I added it my iTunes library, however, the audio is compressed during playback and there is a lot of skipping and blips going on in every song. It still plays perfectly in WMP, but not matter what I do the same thing happens in iTunes.
For reference, here is what the original audio songs like
http://picosong.com/cNPn
And here is what it sounds like in iTunes
http://picosong.com/cNPe

I have a similar problem. When I try to play TV episodes that were downloaded (in .m4v format) using iTunes, QuickTime (7.0.4) will play video without audio, and when I press "stop", QuickTime locks up!
My system used to play these files PERFECTLY, until I downloaded some shareware video format conversion programs (that didn't work, anyway). I believe one of them installed a shared DLL or CODEC or something that is conflicting with QuickTime. I'VE UNINSTALLED AND REINSTALLED QUICKTIME AND ITUNES COUNTLESS TIMES, trying to follow different people's advice, mostly from posts on this site, but nothing helps!!
The thing we have in common is that it sounds like you also have other video software that could have conflicting CODECs or shared DLLs. DOES ANYBODY KNOW HOW TO TRACK THIS PROBLEM DOWN??
And why doesn't Apple make a CLEAN uninstaller and a COMPLETE installer? People shouldn't have to do the manual registry editing and file deletions that other people are recommending!!!!!
Intel 915 Mo Bd. 3.2GHz 1G RAM Windows XP

.AVI files not playing correctly on G3 iBook

With the help of JulieJulieJulie and others I am able to import my mpeg 4 video clips (they are in .avi format on my Casio Exilim EX S600 digital camera) into iPhoto and play them without any difficulty on my G5 iMac and my G4 Powerbook. This morning I imported a group of these files onto my daughter's G3 iBook running Tiger 10.4.5 and iPhoto 5. I tried using both the EX_M4S2 component as well as the Casio .avi importer to view them with the same bad result. The clip starts and then becomes badly distorted, kind of like an impressionist painting through bad glasses--all blurry and wiggly. I then tried viewing them with mpeg streamclip and they also didn't play properly--they just kept stopping. Any idea why the G3 iBook would not be able to play them properly? I have Quicktime 7.0.4 Pro running on all three Macs.
ds

Something you might try as an experiment (if you have a FireWire cable and your iBook G3 has a FireWire port) would be to start-up your G5 in target disk mode and then boot the iBook with the option key down, select the G5's hard drive to boot from and see if playback is noticably better - the system would be running from the hard drive in the G5 which is a 3.5" (vs. the 2.5" drive in the iBook) and runs considerably faster. If playback improves then drive speed would appear to be a factor. Or the OS and QuickTime version installed on the G5 vs. that installed on the iBook since the iBook would be using the software from the G5 hard drive.)
http://docs.info.apple.com/article.html?artnum=58583

Rewrapped AVCHD MTS files not playing correctly

I'm using a Panasonic HDC-TM700 camera to record 1920x1080 60p. The camera records to the AVCHD format which yields a .MTS file. Final Cut Pro X still does not support importing from this camera. I've tried the various tricks mentioned in these forums such as creating a camera archive, importing directly from the SD card, using Panasonic's AVC CAM restore tool, etc. Nothing has been sucessful, so it looks like it's back to re-wrapping the .MTS file to a .m4v file. To do this, I'm using the Rewrap2M4V apple script combined with ClibGrab as described in other discussions. My newly wrapped m4v clips play just fine in Quicktime Player. The movie inspector reports a FPS of 59.94 and a resolution of 1920x1080.
When I import these clips into Final Cut, however, I see two green or black empty frames about every 28-30 frames. This occurs when I'm previewing the clip from the event library and when the clip in in the timeline. The timeline is set to 1920x1080 59.94p, though I've tried 60p and saw the same behavior.
When I export the clip to a h.264 .mov file, I don't see the green or black blank frames, but the picture is garbled in those places.
For what it's worth, I've installed the updated QT codecs. Any ideas?

I don't know what conversion engine clipgrab uses, but i have had success with the old Final Cut Express using ffmpeg based software to re-wrap the .MTS files from my panasonic GH2. I use Media Converter (an ffmpeg front-end) and if you go to their presets page you'll find presets i made to do it. Give that a shot maybe. Another thing you can try to do if that still does not work is a 'standards conversion' of the re-wrapped video to ProRes in JES Deinterlacer.
good luck!

Quicktime files not playing on published iweb site.

Hi,
I can't seem to get my QT movies to play on my iweb published site. Occasionally, I can get them to play, but even then it's only in slideshow mode (i.e., they won't play if you just select the movie thumbnail from the album view). I compressed them using QT pro (they are small files) and used the "fast start" option so theoretically they should start playing right away. Some of them just show the QT logo and some show the QT logo with a question mark. I recently upgraded to mountain lion, but had this issue before the upgrade. I use fatcow as my domain host and used to use go daddy. I don't recall having this issue with go daddy, but it seems unlikely that that change is what is causing the issue.
please help.
-alaina

Usually this happens when the path to the movie file is not correct or the files isn't uploaded at all.
Also check your movie file names to make sure there are no spaces or special characters in them.
There are better ways to display movies on a website and you can see some here...
http://www.iwebformusicians.com/Website-Movie-Video/Player-Showcase.html
To make sure your movie will play in all browsers and on all devices, an HTML5 player with flash fallback is the preferred option...
http://www.iwebformusicians.com/Website-Movie-Video/Fallback-To-Flash.html
For mobile devices like iPhone/iPad the movie should be prevented from loading with the page files by using a poster image and setting preload to "none".

Quicktime files not playing in browser

Please help...
I have now started publishing my website to my domain name instead of mobile me and the quicktime movies embedded on the pages no longer play. Instead there is just a quicktime symbol with a question mark. Why and how can I fix it?
Get the same message whether I download my site through safari or IE.
My website is www.danavideoproductions.co.uk if looking helps.
Sample page has links to 4 other pages, each with a clip that I dragged and dropped onto my iweb pages before publishing with Classic FTP.
Many thanks for the help.

I couldn't view any videos on the sample page using the latest versions of Safari and Firefox. One of the photos, I think it was the I'll be there for you picture, I did get a Youtube screen with the message "We're sorry, this video is no longer available" on both browsers.
I do have the latest Flash Player. Could be a coding problem you are having. I do not know anything about setting up a web page. Just thought I'd let you know what I saw when viewing your site.

Audio files not playing correctly on website.

My husband's website just was rebuilt and we are both having trouble with his recording samples page. The Webdesigner says that it is working fine. When we go to play an audio track, then we click on another audio track the 1st audio track is supposed to stop so the next one will play. However, this is not happening. The second one starts playing over the 1st. I have updated Firefox and am using 26.0. The webdesigner states that it works fine when they test the browser at their office. Can someone please let me know if there is something like a plug-in I am missing. His website is www.peteroprisko.com and the link to the recordings page is here http://www.peteroprisko.com/index.php/recordings-samples. You need to click on product details to pull up the recordings for each album.
In addition, I am unable to add the product to my shopping cart. Again we were told by the webdesigner that this works fine.
I tested both of these issues in Internet Explorer and they both work as they are supposed to, just not in Firefox. So I am convinced it is the browser.
Thanks for your help!

I see the same happening in Firefox and in Google Chrome.<br />
Clicking the play button of another song doesn't pause the song that is playing, so I hear multiple songs playing simultaneously.<br />
I am on Linux, so can't test if it works in IE, but it sounds that the code is only compatible with IE.
Clicking Add to chart makes Firefox send this request:
*http://peteroprisko.com/index.php?option=com_virtuemart&nosef=1&view=cart&task=addJS&format=json&quantity%255B%255D%3D1%26option%3Dcom_virtuemart%26view%3Dcart%26virtuemart_product_id%255B%255D%3D4&_=1390935644403
Which gives this response, but it still displays <i>Cart empty</i>
<pre><nowiki>{"msg":"Continue Shopping<\/a>Show Cart<\/a>
The product was added to your cart.<\/div>","stat":"1"}</nowiki></pre>

MOV files from Ipad not playing correctly in 2010 Windows PPT presentation

I inserted .mov files taken from Ipad 2 into a.ppt on my work PC. I saved these files to the folder containing all of the videos I am showing in the ppt-- the same folder where the .ppt is located as well. Then I inserted them as I do all videos (I create ppts often for work) -- and the clips that are horizontal play fine but the vertical ones do not play correctly- audio and video not in sync. any remedies? (using ppt 2010, converted files to wmv, didn't work either). I should add that when I viewed these files on my PC (by just clicking the file) they play fine, but they are not rotated correctly. This must have been my fault when I took the videos. However, when I insert them they are rotated correctly but just don't play right - looks like a Japanese movie. please help!

Your page code doesn't give instructions to any browser plug-in and uses the out of date "embed" tag:
embed src="hippiehouseshowreel09.mov" width="460" height="360" hspace="2" align="left"></embed
The same code is used at all of your other popup windows and Internet Explorer doesn't know what to do (so it does nothing).
<a class="jive-link-external-small" href="http://">http://developer.apple.com/internet/ieembedprep.html shows the more modern code that works with all browsers.
http://www.qtbridge.com/pageot/pageot.html free software that can help write perfect code.

Embedded Quicktime not playing correctly in InDesign PDF - please help!!

ok - I have an issue that I can't work out and I'm hoping someone can help - tried searching for an answer to no avail. I've just built my first interactive PDF portfolio in InDesign. I should point out that I'm a producer/editor, so my knowledge of InDesign & Acrobat is not extensive. The PDF includes some embedded Quicktime movies. The movies play normally on one of my monitors (Samsung 1680x1050), but will not play correctly on my other two monitors (2x Samsung 1280x1024) - the audio plays and the play controller appears to be working but the video area is just all white...HOWEVER...if I open the PDF and play just one of the videos on my 1680x1050 monitor first, then all videos play correctly on all monitors. Have tried opening the PDF on another desktop and the movies do not work (in the same manner as above)- also tried on my laptop and the movies play correctly. Please help if you can - I need to get this out to clients and I'm baffled!! Thank You!

Is it as easy as wmode: transparent after shoving the swf into a table??? does the transparent option make everything outside the table dissappear? thanks...

Ive got youtube videos converted to mp3 files on my itunes, they used to play fine but since the recent update they do not play correctly. how can i fix this?

Ive got youtube videos converted to mp3 files on my itunes, they used to play fine but since the recent update they do not play correctly. how can i fix this?

Try running these songs through MP3 Validator to see if there any issues.
If nothing else, convert them to another format such as AAC via iTunes using the instructions in this Apple support document.
iTunes: How to convert a song to a different file format
B-rock

Video portion of Nightwish DVD not playing correctly on Quicktime. It is not a smooth playback. Can I correct this?

Video portion of Nightwish DVD not playing correctly on Quicktime. It is not a smooth playback. A little jerky. Is there an easy slution to the problem?

I worded my question incorrectly. It isn't a DVD I'm having the problem with, it' s a Nightwish concert download form iTunes I am having the video portion of the video that plays not smoothy. Like it is moothing it short little segments, not a steady flow!

I am using OS 10.7 Lion. Quicktime will not play avi files. One support forum gave 2 links to get them but I got a 404 error. Can anyone help?

I am using OS 10.7 Lion. Quicktime will not play avi files. One support forum gave 2 links to get the proper codecs but I got a 404 error. Can anyone help?

You can also use VLC
http://www.videolan.org/vlc/download-macosx.htm
It woks very well, can read almost anything, and also lets you do conversions to other formats.

Quicktime file not playing correctly

Similar Messages

Maybe you are looking for