Quicktime file out of sync when trying to convert it to

I was sent a .mov file created on a Mac via yousendit.com, and downloaded to my office PC via yousendit.com. I need to convert it into a format I can burn onto a DVD using Vegas Pro and DVD Architect.
It plays fine as a .mov file from my desktop but when I play it from DVD Architect, the sound and picture are out of sync.
I put it into Vegas Pro to see if I could sync the sound but there is no picture when played from Vegas Pro.
Is this because there is a problem with the .mov file, and/or the fact it was downloaded from yousendit.com, or is it a problem with DVD Architect and/or Vegas Pro?
All help much appreciated.
Thanx.

Hey,
Please mention the configuration of your system specially CPU and RAM.
This error usually occurs, if you run too many memory-extensive applications simultaneously. So try performing those redaction tasks after closing some of the background processes/applications
Hope that helps.
Regards,
Rahul

Similar Messages

  • Audio out of sync when playing HD content

    Hey
    I've got an issue with the audio gets out of sync when playing some HD content. I've tried to make sure the video is stored on the Apple TV so it can't be the network connection.
    I've also tried a full reset of the unit, but still no luck.
    But it's all video clips that has this problem. Even though they encoded the same and so on, some videos audio get out of synced and some don't.
    Also have a problem with m4v files locking the ATV (and iTunes for that matter), but renaming it to a mp4 file seems to solve it. But if someone has a fix for that as well I'd much appreciate it.
    Many thanks in advance,
    Jeaz
    EDIT: I have tried to use component cables instead of HDMI, but the problem remains. Of course also tested the video on my Mac and no problems. A quick pause and resume usually solves it, but only for a minute or so.
    Message was edited by: MrJeaz

    What sort of specification is the video content? Is spec too high for AppleTV.
    It may be that it's some kind of bug in AppleTV's playback, that the Mac does not exhibit, or an issue with encoding that causes a problem only on AppleTV.
    If you are encoding video and using same as source for the frame rate, it may be better in some cases trying explicitly to specify the frame rate required in case automatic frame rate conversion is introducing some kind of timing issue. Test a short clip to see.

  • Out of Sync when importing rendered sequence

    This is the first time I've had this happen and haven't been able to solve the problem yet and haven't found any solutions yet through searching. Using CS5.5, I'm building a show consisting of 7 or 8 already rendered sequences. All seem fine when put together, but one sequence is thrown way out of sync when I import it. The file plays fine otherwise and it isn't until it's imported into premiere that the problem occurs. I've tried re-rendering several times and get the same out of sync problems. And it eventually gets wildly out of sync, not just a few seconds. The properties of the clip are:
    Type: MPEG Movie
    File Size: 1.5 GB
    Image Size: 1920 x 820
    Frame Rate: 23.976
    Source Audio Format: 48000 Hz - compressed - Stereo
    Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
    Total Duration: 00:04:23:09
    Average Data Rate: 6.0 MB / second
    Pixel Aspect Ratio: 1.0
    This is the same as all the other rendered/imported sequences. I'm at a loss here. Is there anyone who can help steer me to solving this?

    Welcome to the forum.
    Just so that everyone is on the same page, when you say "rendered," is it safe to assume that you mean that that file was Exported, and then is being Imported into a new Project?
    Good luck,
    Hunt

  • QT file out of sync

    I made a QT file out of a 5min Final Cut Pro movie, used 30fps for YouTube. Before I uploaded it, I viewed it and it was just noticeably out of sync when people spoke. Can I make it more in sync by redoing the project?

    Jim - did you get your answer or find a fix?
    I'm discovering sync issues with QT's also. It seems to be a consistent 4 frames out of sync, with video later than audio. I've been doing test outputs where I slip my audio downhill 4 frames in my timeline and make a QT and it then appears to be in sync.
    Ironically, my frame offset is set to 4 frames in System Preferences/PlaybackControl. But this only affects playback to external monitors, not output, so I'm ignoring this fact.
    My concern is how do I know which is accurate, my timeline or the Quicktime? If I send out an EDL for mixing, is my audio session going to match the picture or be four frames off?
    You may not know the answer to that one, but I wanted to start by asking if you found your fix, and renewing this thread with an expanded version of your initial question.
    Anyone? Thanks.

  • Why  would an error pop up saying the installer is damaged. The Installer can't open the package. There may be a problem with file ownership or permissions. when trying to install java 7?

    why  would an error pop up saying the installer is damaged. The Installer can’t open the package. There may be a problem with file ownership or permissions. when trying to install java 7?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Select
    /var/log ▹ install.log
    from the hierarchical list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

  • Anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

    anyone else getting a timed out error message when trying to check for updates via the app store software on a desktop?

    Hi, couple of things to try...
    Anonymous
    Post subject: NSURLErrorDomain error -1100 in OS X 10.8
    If you check for software updates using the App Store in OS X 10.8 and get "NSURLErrorDomain error -1100" the problem may be with your Software Update preferences. This is particularly likely if you were using a custom Apple Software Update server. To solve the problem, quit the App Store, move the following two files (if present) to the trash, restart, and only then rerun App Store updates:
    /Library/Preferences/com.apple.SoftwareUpdate.plist
    /Library/Preferences/com.apple.SoftwareUpdate.plist.lockfile
    http://x704.net/bbs/viewtopic.php?f=12&t=6130
    I was recently trying to upgrade to mountain lion through the app store.  I have unreliable Internet from a cable company whom I will not name, but we all know who they are.  My Internet dropped while downloading the upgrade.  Once I went through the notorious unplug the modem/router and plugged it back in to gain Internet connectivity again, I could not resume. No matter what I did, the app store kept displaying "an error occurred." I am hoping that those with the same issue read this first to save them hours of skimming through the Internet to find a solution.  Here are the steps to take:
    1. Make sure you have reestablished Internet connection
    2. Chances are you got frustrated when you tried to resume/unpause the download and clicked the "X" to the left.  If so, select the "Store" drop-down menu from the App Store and select "View My Account." There should be an option to unhide your purchase.  You know what to do.
    3. There is also an option to  reset all warnings for buying and downloading under "View My Account." Do this, click "Done," sign out of the App Store and quit the App Store.
    4. Open the Preferences in safari and select Privacy.  Select "Remove All Website Data."  Just do it.
    5. Launch the app store and sign in.
    6. Now, if you "Check for Unfinished Downloads" everything works peachy.
    I hope this helps.  Not much I can do for your Internet connection though.
    JonEz15...
    https://discussions.apple.com/thread/4697970?tstart=120

  • A portion of audio that is synced in iMovie, is out of sync when burned with iDVD. How can I avoid this?

    I'm trying to burn a simple movie, using iMovie and finishing in iDVD. A portion of the audio is out of sync when burned, despite it being in sync in iMovie. Any suggestions?
    Thanks.

    Hi
    Try to - Save as a DiskImage - then test this with Apple DVD-tool.
    Does this play OK - burn this DiskImage by using Disk Util tool.
    Set down burn speed to x2 or 4
    Yours Bengt W

  • Error when trying to convert excel files to pdf

    I'm getting the following error when trying to convert .xls and .xlsx files to pdf, using the "Create PDF" option:
    Error message from the primary converter:
    ALC-PDG-010-012-PDFMaker reported an error while printing the document.
    Word, Powerpoint and Text files convert without any issues. Also I'm able to opent the excel files and convert them to pdf using the acrobat option in excel.
    Livecycle Version: 10.0.2, GM
    MS Office Version: 2007
    Any help would be appreciated. Thanks in advance.
    Regards,
    Suhail N.

    It is always difficult when you need to convert multiple xls files to pdf or multiple sheets to pdf. If you have a single file to convert then the best method would be to copy your data to doc file and then convert it into PDF . If you have multiple files to convert then it is really difficult to convert all the files manually. Then the better method would be to use converter tool to convert excel to pdf . By doing this you can convert many files in just few seconds.

  • App File Server connection error when trying to run a BI Publisher report..

    hello Gurus...
    As above - App File Server connection error when trying to run a BI Publisher report.. FOR THE FIRST TIME.
    What does our DBA need to do..?
    error message reads..
    Template code: SUARXASR
    Template app:  AR
    Language:      en
    Territory:     GB
    Output type:   EXCEL
    [5/10/10 10:59:27 AM] [UNEXPECTED] [46321:RT1487572]
    oracle.apps.fnd.cp.util.RemoteFileException: An error occurred while attempting to establish an Applications File Server connection with the node FNDFS_*****.ac.uk. There may be a network configuration problem, or the TNS listener on node FNDFS_*****.ac.uk may not be running. Please contact your system administrator.
    at oracle.apps.fnd.cp.util.RemoteFile.readURL(RemoteFile.java:241)
    at oracle.apps.fnd.cp.util.RemoteFile.transferFile(RemoteFile.java:194)
    at oracle.apps.fnd.cp.util.RemoteFile.transfer(RemoteFile.java:130)
    at  oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:264)at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:157)
    [5/10/10 10:59:27 AM] [46321:RT1487572] Completed post-processing actions for request 1487572.I'm sure we never had to set anything up in our Test instance!??!!??
    many thanks for looking..
    Steven

    nobody experienced this before..?

  • I'm getting a 9041 error when trying to convert files to AAC -- any ideas on how to fix it?  the files files in iTunes show up as Apple Lossless but i can't put them on my iPod

    i'm getting a 9041 error when trying to convert files to AAC -- any ideas on how to fix it?  the files files in iTunes show up as Apple Lossless but i can't put them on my iPod

    "I have been able to convert to AAC by first converting to AIFF  and then to AAC. This is a pan though."
    this worked for me.
    thanks.

  • When trying to convert a pdf file into a word doc, i only get the graphics but not the text. How do i remedy this?

    When trying to convert a pdf file into a word doc I only get graphics but no text. What to do?

    Hey hamsa142,
    I think you are converting a scanned PDF to word.
    You might need to run OCR first to make the text recognizable and then convert it to word.
    Regards,
    Anubha

  • HT201210 what does it mean when it says the firmware file is not compatiable when trying to update

    what does it mean when it says the firmware file is not compatiable when trying to update

    Exactly what it says. 
    Is there sufficient free space on the computers hard drive? 

  • What makes a file unreadable or readable when trying to move it into the library

    What makes a file unreadable or readable when trying to move it into the library

    Any more info? It could be many things including what you are doing - you do not "move" anything to the iPhoto library - you use iPhoto (or image capture) to "import" into iPhoto
    We know nothing except what you tell us so full information and correct terminology is critical to getting valid answers - the more that is left to one guessing and assuming the better the chance of a bad answer
    LN

  • Ora-04030 process out of memory when trying to allocate nn bytes..

    Hi,
    Again we are facing the same error after increasing pga_aggregate_target from 2G to 3G, the journal import program request finally results in ora-04030 process out of memory when trying to allocate nn bytes.
    wiil there be any bugs issue?
    DBMS:9.2.0.3
    OS :sun sparc 5.10

    IF possible try to apply last patchset to take your DB to the latest version which should be more reliable and many bugs should be solved.
    Do you have free physical memory to use the 3gb?
    Hope this helps.
    Regards.
    FR.

  • Just purchased this, verified my email, payment taken etc., etc., but keep getting a message when trying to convert a doc saying an error occured when signing in.  I have siged out and signed in again - no avail.  Any help would be much appreciated.  Than

    Just purchased this product, verified my email, payment taken etc., etc., but keep getting a message when trying to convert a doc saying an error occured when signing in.  I have siged out and signed in again - no avail.  Any help would be much appreciated.  Thanks

    Hi there Katie,
    I just checked your account, and see that it's active. Are you trying to sign in via Adobe Reader? If so, please choose Help > Check for Updates in Reader and make sure that it-s up-to-date. The most current version, 11.0.07, should alleviate that sign-in error.
    Best,
    Sara

Maybe you are looking for

  • ERS for automatic PO generated via GR

    Hi all, I am trying to do ERS for a PO which is generated automatically at the time of GR. But I am not able to do it, when i m doing ERS via MRRL, it is showing no documents found. But similarly for the same material and vendor when I manually creat

  • Thunderbolt display has stopped working with my mac mini

    I purchased a brand new thunderbolt display and mac mini a couple of months ago, and now the thunderbolt display no longer comes on when I start the mac (I am only able to type this here because I pulled out my old monitor and plugged it in to the ma

  • Color correction

    there was a thread on cs5 about this that interested me, so I started new thing here cause Im using cs3.. Shooternz, your help in the cs5 thread was great...and this is what I did....in my particular circumstances... ( I have to say that this is real

  • Problems with auto commit

    Hi All, I am having some trouble with the auto commit. In the sql work sheet i update a table and then disconnect. It seems to be auto commiting the changes i made. i went in and unchecked 'Save all when deactivating or Exiting' Do i need to turn thi

  • Using Reports option under Rel 2

    How does one use the reports option listed as a new element in the object navigator of Forms Builder? When we base a report on a block in the form, in the report definition it is getting stored as the query similar to the block. What advantage can it