Quicktime file works in Camino and Firefox, but not Safari

Hi all,
I just updated my iWeb site, which I use as a portfolio site. I have quicktime files loaded that are commercials I've worked on. Today I added one via iWeb, loaded it, then went to watch it and it doesn't work. The page opens, the QT window is there, but it's like the file doesn't load. The play line at the bottom remains light gray, and it doesn't fill up showing that the file is loading. HOWEVER, i've gone to both Camino and Firefox and it plays in both of those browsers.
I was previously on 3.1.2 and noticed there was an update available. Updated, then tried again and the same problem persists. I'm confused.
I'm guessing this has to be a Safari thing since i've been successful getting it to play in 2 other browsers. Has anyone come across this and know of anyway I can get this work? Having this available for viewing is pretty important, as I use that site as a portfolio site and a means of getting jobs. Any help would be appreciated. Thanks.

Okay, so both are back in the folder and I'm back to where I started; the QT window loads, but the status bar does not seem to be loading, that is, I can hit the play button but it won't play b/c it's like the file is not loading.
I did go to Help>Safari>Installed Plug-ins. Both are shown; there's a section for QuickTime Plugin.plugin and for QuickTime Plugin.webplugin. Both have a much larger header above them that says "QuickTime Plug-In 7.5.5." Not sure if that's pertinent or not. Just thought I'd post that info.
Okay, so here is the page to my spot that doesn't work in Safari, but does in Camino and Firefox:
http://www.smithcory.com/portfolio/NFLSuper_AdPromo.html
It's a small file, 4.6MB's so I can't imagine file size being a problem. There is a slight difference bt firefox and Camino when playing it; in Firefox, it takes about 8 seconds before it will start playing, like Firefox is loading it or something. In Camino, it plays right away. Not sure if that helps or is pertinent again, but just trying to provide as much info as I can. Thanks for the help.

Similar Messages

PDF Documents with Functional Buttons - Works for IE and FireFox but not for Chrome and Safari

To all,
Good morning. Our institution developed a PDF document with functional buttons for printing and e-mailing. When the document is viewed via Internet Explorer and Firefox, the functional buttons work as expected. However if the document is viewed via Chrome and Safari, the functional buttons do not work. The workaround for those who are using Chrome and Safari, the PDF document needs to be saved to their local drive before the functional buttons work.
Has anyone experienced this issue before? If yes, what was your solution other than the workaround.
Thanks.
Babylon5

Here's how to configure your browser to run Adobe Reader: http://helpx.adobe.com/acrobat/using/display-pdf-browser-acrobat-xi.html

Servlet file download works in IE7 and FireFox but not IE 6

We have a table with export button. When user clicks on export link, we download table content as csv file. It is working correctly in IE7. In IE6, It is not working. When user clicks export button, I am gettting the folloiwng information
File Download box reports
Name: GridAction.action
Type: Unknown File type
FromL localhost
This is my code.
//oResponse is HttpResponse
// Set the content type
oResponse.setContentType("text/plain");
// Set the content-disposition aka the file name
oResponse.addHeader("Content-disposition", attachement;
filename=test.csv");
// Set the cache control
oResponse.setHeader( "Cache-Control", "max-age=1" );
// Get the outputstream
OutputStream oOutput = oResponse.getOutputStream();
// Copy content to output
oOutput.write(grid.getExporter().getContent());
// Flush
oOutput.flush();
What am I doing wrong???

I don't understand..Can u explain more ?
oResponse.addHeader("Content-disposition", attachement;filename=test.csv");
Although this can't be your real code anyway.

Just installed IE 10. Adobe Flash is installed, and works in Chrome and Firefox, but not IE10

Please, someone tell me what's going on. This is driving me nuts!
[email address removed]

Download the Adobe Flash Player installer directly by right clicking the following link and selecting "Save target as" (IE).
Flash Player for ActiveX (Internet Explorer)
Save it - DO NOT run it.
Reboot, and THEN run it.
If you're still having IE troubles,
See:ActiveX Filtering in Internet Explorer
and: Enabling Flash Player in Internet Explorer

After uninstalling and downloading the latest Abobe Flash player, I can no lnger play youtube videos. I get the message "blocked plug-in". It works in Firefox, but not Safari.

After uninstalling and downloading the latest Abobe Flash player, I can no lnger play youtube videos. I get the message "blocked plug-in". It works in Firefox, but not Safari?

Frostbitblue,
in Safari’s Preferences, select its Security tab, and make sure that its “Internet plug-ins: Allow Plug-ins” checkbox is checked.

My bulleted list displays correctly in IE 8 and Firefox, but not in IE 7

I have a simple bulleted list in a right floated sidebar for a website. If views fine in IE 8 and Firefox, but not in IE 7 (and perhaps earlier, though I only have access to machines with IE 7 and 8.
Because the default indent for the bulleted list moves it too far to the right, I set a negative margin for that area of text in order to move it to the left a little. While it looks great in IE 8 and Firefox, it appears this margin setting is causing the bulleted list to shift too far to the left in at least IE 7. The rest of the copy in the sidebar div lookes fine including the title and paragraph copy.
Can anyone suggest a fix?
Also, I noticed the spacing above the main content div is smaller in IE 7 than with the IE 8 and Firefox. This div has a h1 heading followed by paragraphs. (This site was developed using a pre-existing CSS style sheet from Dreamweaver by the way.)

Strangely when I replied via e-mail my message got garbled when I looked at it here.
I was able to move over the bullet items to the left using your suggestion, however it now shows this line of copy above the page at the top of the window in the IE browser (both IE 7 and IE 8):

<title>Home Page</title>

<link href="../css/twoColFixRtHdr.css" rel="stylesheet" type="text/css" />

<style type="text/css">
<!--

Infragistics gridview control sorts in Google Chrome and Firefox but not in IE11

I have an Infragistics webdatagrid control on my website homepage that displays few information in form of rows. The code is as follows
<asp:Panel ID="Panel" runat="server">
<ig:WebDataGrid ID="UltraWebGrid" runat="server" oninitializerow="UltraWebGrid_InitializeRow"
EnableRelativeLayout="false" HeaderCaptionCssClass="GridHeaderCaption"
OnInit="UltraWebGrid_Init" onrowupdated="UltraWebGrid_RowUpdated" OnRowUpdating="UltraWebGrid_RowUpdating" OnColumnMoved="UltraWebGrid_ColumnMoved"
EnableAjax="true" EnableAjaxViewState="true" EnableDataViewState="True" OnColumnResized="UltraWebGrid_ColumnResized" OnColumnSorted="UltraWebGrid_ColumnSorted">
<Behaviors>
<ig:Sorting >
</ig:Sorting>
<ig:ColumnMoving EnableInheritance="True">
</ig:ColumnMoving>
<ig:Filtering FilterType="ExcelStyleFilter">
</ig:Filtering>
<ig:ColumnResizing EnableInheritance="True" >
</ig:ColumnResizing>
<ig:EditingCore AutoCRUD="false">
<EditingClientEvents CellValueChanged="UltraWebGrid_Editing_CellValueChanged" />
<Behaviors>
<ig:CellEditing>
<CellEditingClientEvents />
<EditModeActions EnableOnActive="True" MouseClick="Single" />
</ig:CellEditing>
</Behaviors>
</ig:EditingCore>
</Behaviors>
</ig:WebDataGrid>
</asp:Panel>
The column is sorted accordingly when user clicks any column header. This happens in Chrome and Firefox but in IE we have a weird behavior as below
Users complain that when they get to the home page for the first time , and they try to sort on the grid, the operation doesn’t get done. They need to go into a row before the sorting works, and after that everything is fine.
Any idea or pointers would greatly help.
K.V.N.PAVAN

Since this is a WPF forum I would suggest that you go to the Asp forum for help.
http://forums.asp.net/
Lloyd Sheen

Navigation looks find in IE & Firefox but not Safari. Help please?a

Hi,
I am fairly new to the website design world. I just created a website for a college class . I got the site to look great in Internet Explorer and FireFox but for some reason I am having a problem with Safari.
I am a mac user so I really want my site to run good in Safari. The problem lies with the navigation menu. As I said it looks good in other browsers but in Safari it appears to be longer than the rest of my page. I have tried to change everything I can thing of to get it to fit within the page. I tried specifying the #nav width, I tried changing it to auto. Before I added the scroll over drop down menu, it was fine. Any suggestions as to what might be wrong?
Side note: When I magnify the page in safari I can eventually get the navigation to fit within the page...
Take a look. http://www.calihanchiropractic.com/
I am using CS3 & CS4. Does anyone have any suggestions as to how to get this to fit within my page?
Thanks!
Aubrie

Do you have the QuickTime Plug-in for Safari?
http://www.apple.com/safari/download/plugins.html
Since lots of people do not have QuickTime or QT plug-ins installed on their system, you should offer direct links to MP3s, too.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

Works in preview and IE but not Firefox

Hi All,
I have a 6 page prototype in Fw with each page containing mutliple types of behaviors (rollovers, swaps, nav bar). They all work great in "preview and IE". However, in Firefox I have 3 out of 4 rollovers on the same page that do not work. I have tried both rollover and image swap. All the other slice/behaviors on all the other pages work in "preview, IE and Firefox"?
Thanks,
Randy

Hi Linda,
When I exported the project all of the pages worked correctly. I was able to show the prototype with everything working. I later rebuilt the page from scratch and everything worked in preview mode as well as once exported.
Thanks for the response!
Randy

Video file works when downloaded in IE but not when downloaded in FF

I am constantly being sent QuickTime MOV files from a client via YouSendIt. Whenever I download the file via Firefox, it appears to download fine but it will not play the video. I get the error message "Error -2048: Couldn't open the file because it is not a file that QuickTime understands." Yet whenever I download the exact same file to the exact same desktop and try to open it with the exact same QuickTime player, but using Internet Explorer to click the download link (and handle the downloading, I suppose)... it works fine and the video plays perfectly. WTF?
All other variables are identical. The only difference here is that the file is unusable when downloaded via FireFox yet perfectly fine when downloaded via Internet Explorer. Why? How is this possible?
The only difference I can see on my desktop is that the version of a test video is 39,305,216 bytes when downloaded using FF, yet the exact same file is 39,370,752 bytes when downloaded using IE. I don't know if that's relevant information but how is this even possible since they are both downloads of the exact same file? Shouldn't both browsers neither add nor remove data from the file itself, so it should be the exact same file? Yet it's obviously different in some way, and apparently different in a way that affects the ability of QuickTime to play the file. Why would this be?

If it works in IE but not FF, then it has nothing to do with the mp3s. More likely it's because of the HTML on the page.
To start, page is missing DOCTYPE declaration... a MAJOR problem. The DOCTYPE declares which set of rules the browser will use to display the page. Without it, different browsers go crazy or do not work at all.
http://www.w3schools.com/tags/tag_DOCTYPE.asp
Validate the html code here:
http://validator.w3.org/
You will have to fix all the errors if you want this to work in all browsers.
Best wishes,
Adninjastrator

HTML5 Video Works In Live and Preview But Not on My Website

I feel totally ripped off by Adobe, again, I talked to a sales representative who told me that if I bought CS6 I would be able to easily install html5 video because the new version had an insert function that did most of the coding for you and gave you a properties view to select alt source... Now, I find out that is only available in the Cloud version. What a bunch of ....
Anyway, I can't get my video to play in IE, but it works fine in FireFox. I am using Windows so don't know about Safari. The live view and the preview in browser video works just fine but when I upload it to my site the webpage with the video has a space where the video is with dotted lines around it, but it is empty. The control panel flashes for a second but disappears. The video file is there in three versions. I check the MP4 version and it works fine, as I said it works in the preview IE browser.
Any ideas? Very frustrated, I figure if I had the properties view or could have inserted the file via HTML5 video command it would probably work.
Here is my code:
<video id="0" preload="metadata" controls width="640" height="460">
        <source src="FunWithMyFriend.ogv" type='video/ogg; codecs="theora, vorbis"'/>
        <source src="FunWithMyFriend.webm" type='video/webm' />
        <source src="FunWithMyFriend.mp4" type='video/mp4' />
        <p>Video is not visible, most likely your browser does not support HTML5 video</p>
      </video>

Thanks Nancy, you're sure right about the user - I am a newbie and quite ignorant yet. I am a Linux user through Host Gator (not so good btw - slow over-crowded servers). I checked and added the basic MIMEs that I am trying to play. h.264, mp4, mov, ogg (OGV), WEBM, even wmv.
Here is the page - it is 3/4 of the way down the page where I try to include a graphic file that won't play in IE9 but will in Firefox and Chrome.
http://christopherproductions.us/Graphics.html
I tried reconfiguring the MP4 file several times using all sorts of settings here is the most recent versions and my code on this page. Note on the webpage below I explain that the Sony Movie Studio forum suggests saving in MainConcept AVC/AAC (*.MP4/*.AAC) Internet HD 720P codec   I also tried saving in WMV and then using Freemake to convert the file to HTML5 (it makes three files, obviously the ogv file works in Firefox, I don't know about the WEBM file, but it looks like the mp4 file doesn't work, that is why I made one file specificially for mp4 using Movie Studio to render it.)
http://christopherproductions.us/AdobeForumHelp.html
Thanks to anyone who helps - I really appreciate it.

Documents to Go Password Works on Q10 and Playbook but not on MS Excel 2007,2010 nor 2013 on PC

This has been really frustrating for me. I'm a long time BB user (over 6 years) and want to promote BB and its features, but when straigtht forward features don't work and when it hard to find any information on why they don't work is painful.
The excel file that I have I can edit and save it on my Playbook, and Q10, but when I copy the file to my PC and try to open it, I get an error message from excel that the file is corrupted. I have tried different options (i.e., renaming the file then copying it, trying to open it with excel 2007, 2010, and 2013, using the Web App to open it, and it says that I need Rights Management (RM) to open.) Does anyone know of a means to open without using software to break the password. I appreciate any assistance.

Hey garyr501,
Welcome to the BlackBerry® Support Community Forums.
To better assist you I have a couple questions; If you go to the properties of the Excel file on your PC what is the file format? And does this happen with all Excel files created on the BlackBerry smartphone using Documents to Go?
I look forward to hearing back.
Thanks.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Memory Stick works with G4 and G3 but not G5 iMac

I have a memory stick that connects correctly with a G3 iBook and G4 iMac but not a G5 iMac. When plugged into a G5 USB port, the memory stick appears on the desktop but not the Finder. Doubleclicking on the desktop icon generates a Finder window in which the memory stick appears in the second column from the left along with the other icons in the top half of the leftmost column. Clicking on the icon for the memory stick in that Finder window fails to open it. The File menu has a item for ejecting the memory stick, but ejection does not result. I have also tried without success to drag the icon to the trash. So I just physically remove it, which produces a message saying the device was not properly removed.
Any ideas for enabling this memory stick (which has admittedly been through the wars) to work with the G5 iMac? Thanks

Thanks for the suggestions, Charles.
The G5 keyboard is Bluetooth so I've been plugging the memory stick into the back of the machine.
I've repaired permissions on the G5. I tried to repair the memory stick in Disk Utility but elicited only the spinning beachball. As I was typing this I realized I hadn't tried repairing the disk (i.e., the memory stick) on another computer. I did, and after a few seconds the screen said no repairs necessary.
The memory stick did eject the first time I plugged into the G5 after that. But the other problems remained. And then when I plugged it back in, it no longer ejected electronically. So I'm back where I was.

Edge Animate file working on main blog page but not on the individual blog post in BC

I recently uploaded an edge animate file to my blog which is host on Business Catalyst (BC). The edge file works on the main blog page but not on the individual blog post. How can I solve this problem?
I did the following steps:
I added the required Adobe Edge scripts on my main blog template.
Create folder on the server called "edge_includes" and uploaded the 'edge.5.0.0.min' file.
Create folder on the server called "js" and uploaded the 'jquery-1.7.1.min' file.
Copy and pasted the div to the part of the blog post I wanted the file to appear (<div id="Stage" class="EDGE-13973370"></div>).
Uploaded the name of the js file to the root called 'World of Code_edge.'
Uploaded the images to the existing folder called 'images.'

I'm still unable to figure out the problem.
Here is the link to the blog: http://goo.gl/sPW62j (the post titled "Basic Computer Science is a Fundamental Skill in the 21st Century Society").
Here is the link to the individual post: http://goo.gl/jTSgZH
Also, I get mixed results on the main blog page. Sometimes the image (Edge Animate file) on the main page shows and other times it does not. However, the image never shows on the individual blog post.

Weird: Backup file works fine from the network but not when moved into sandbox environment

We have a valid full backup of a database. We know it is valid, we have restored it twice from the network with no problems, but we do not have access to the network location from our sandbox environment.
The .bak file is sizable at about 9GB. The .bak file resides on our internal network, in a SAN drive. No problems there. When we copy the file from there into a sandbox environment to attempt the restore in the sandbox environment it gets corrupted. We've
tried three different times and all three different times it gets corrupted. First time we copied the file over to the sandbox the restore went up to 50% and failed. The second time we copied the file again and attempted the restore again it failed at 70%.
The third time it failed at 60%. The error message we get during the restore is "...Read on ... failed: 13(The data is invalid) Msg 3013, Level 16, State 1, Line 1 Restore database is terminating abnormally."
Now some background here. To move the file our network team is doing this: they have this .vmdk file that they mount out in our production environment (which has access to the network location where the .bak file is), copy the file into the drive, then move
the .vmdk file into the sandbox environment(which does not have access to the network location), mount the drive in the sandbox environment, and then I have access to the .bak file from within the sandbox environment.
Something in the process of using the .vmdk file to move the .bak file from production into the sandbox is causing the file to get corrupted.
Any thoughts? Has anyone seen this before? Any idea? TIA,
Raphael
rferreira

Original server that generated the .bak file:
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2550.0 (X64)
Jun 11 2012 16:41:53
Copyright (c) Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
Server where I CAN restore the .bak file from the network location (not inside the sandbox):
Microsoft SQL Server 2012 (SP1) - 11.0.3128.0 (X64)
Dec 28 2012 20:23:12
Copyright (c) Microsoft Corporation
Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
Server inside the sandbox where I get the error when attempting to restore the backup:
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2550.0 (X64) Jun 11 2012 16:41:53 Copyright (c) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
rferreira

Quicktime file works in Camino and Firefox, but not Safari

Similar Messages

Maybe you are looking for