Quicktime gets a file not found error in running of set up.  tried downloading twice

Quicktime gets a file not found error in running of set up.  tried downloading twice

Hi Spex,
I can import the VI Logger task OK (from another PC running VI Logger 2.0), but I can't run the task.  I've attached the file.  The "1 channel" task runs OK.  The "x-probe" task starts, takes 1 or 2 data points, then hangs for a few seconds, then pops up the "file not found" error. The data acquisition taks run OK, so I don't think they're the problem.
This file I've attached includes 2 good data tasks ("1 channel" and xprobe"), 1 good VI Logger task ("1 channel"), and my non-working VI Logger task ("x-probe", which works fine on the PC it was exported from).
I have also tried exporting the non-working VI Logger task on its own, and it still imports OK, but still doesn't run, and gives the same error.
Thanks,
Jake
Attachments:
configData1.zip ‏353 KB

Similar Messages

  • When i try to share a movie to idvd from imovie i get a file not found error

    when i to share a movie from imovie to idvd i get a file not found error can anyone help?

    Hey ninimac!
    Here is an article that can help you troubleshoot this issue with burning DVDs in iDVD:
    iDVD: Troubleshooting issues with burning discs
    http://support.apple.com/kb/ht1583
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Getting "QueueConnection" file not found error in IOS

    Hi All,
    Iam using SUP 2.1 ESD #1, in have tried the sample SUP101Sample in IOS, but it is showing the "QueueConnectionu201D  file not found error. can anyone help to resolve this.
    Thanks,
    B.Ushasri

    Can I ask what version of iOS you are using? Have you been able to compile youre code?
    Thanks
    Ian

  • Most search engines are not working, only Google Search works and I get 404 file not found error when clicking the links.

    I have been trying virus killers, malware software from microsoft, I uninstalled Firefox and reinstalled it, I used the option to change all my options to the basic default installed options, I am able to search without problems using Internet Explorer on all search engines, Google Search engine works in firefox browser; but all the links give the 404 file not found error. Links from my Gmail account do not work either...giving me the 404 error. Firefox is much faster than Internet explorer however, this link problem makes me wonder if firefox is really any good.

    Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
    Note: ''This will temporarily log you out of all sites you're logged in to.''
    To clear cache and cookies do the following:
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
    Did this fix your problems? Please report back to us!

  • Getting a file not found error with jam pack instruments

    Since Logic Express no longer works with the current Mac OS X versions, I'm trying to get used to using GarageBand again while I save up to buy the full Logic Package.  I had purchased all of the jam packs years ago and recently also purchased Main Stage.  Now, when I go to use, for example, an instrument from the Orchestral jam pack, I get a message saying "EXS24 instrument “Cellos.exs”: Audio file “VC-L_legato_f_C2.wav” not found!" with the option to continue or search again.  Clicking "search again" always ends up with the same message.  This is driving me nuts!  Pretty ****** off right now that I can't use what I paid money for.  Isn't this stuff supposed to "just work"?  Or did that die with Steve Jobs?

    same Problem: Working with OS X 10.6.8 on a MacBookPro Santa Rosa and Logic Pro: Its not possible to use the cello.exs 'cos missing audio file “VC-L_legato_f_C2.wav”, same problem with Basses.exs (missing KB-L_legato_f_A#1.wav) and the  Piano. All this broken Instruments are from the Jam pack Orchestra Library.

  • When I call VI on Linux from Teststand on Windows using TCP/IP I get "file not found error".any sugeestions?

    I am trying to execute a VI running on Linux from Teststand running on windows 2000 prof ,both running on two different machines.I used TCP/IP for the interface using the following steps on Labview VI:tools>options>VIserver>TCP/IP and gave the ip address of both the machines.When I gave the file path as c:\home\test.vi in Edit labview Vi call window(the Vi in linux is stored in /home/test.vi)and also in remote vi path:/home/test.vi,I get a file not found error.The teststand version is 3.0 and labview is 7.0.Any idea why this is happening and any solutions?

    priya guru,
    Here is a knowledge base that addresses your question: �How do I call test VIs that reside on a non-Windows platform from TestStand?�
    You also need to set TCP/IP Access found in Tools->Options->'VI Server: TCP/IP Access'. Make sure that you list the IP address in the Access List to allow TCP/IP access to that machine. Finally you need to specify which VIs are accessible to remote applications. Open up Tools->Options->'VI Server: Exported VIs' and provide paths to the VIs you wish to be remotely accessible.
    I have attached an example VI that demonstrates VI Server in action. Please post back if you are still having problems. Good luck!
    Cr
    aig H.
    National Instruments
    Attachments:
    Remote_Run_--_VI_Server.zip ‏88 KB

  • File not found, Error= –43

    Everytime i try to make a new project logic pro does not accept audiophiles i use from other project-folders (File not found, Error= -43).
    Even with the newest logic-version (10.0.7) and also a new mac book pro (moving via migration assistant) it does not work.

    Hi,
    I have a 'file not found' problem with Logic Express. A while back I transferred all my Logic files to DVD to make room on the hard drive. It took 4 discs, saved alphabetically by song title. Now, I nearly always get the 'file-not'found' error message when I try to work on something. Sometimes when I click 'search' it finds the file, sometimes it doesn't. I'm confident that I didn't delete the files.
    Wondering if 'search' would find the files if I transferred all the files from DVD to a single folder on an external drive. I don't use the 'search manually' option, because I'm not really sure what I'm looking for, or where to look. In the other room, perhaps? 'Computer challenged' is me. Any suggestions?
    DS

  • File not found error when opening securedoc.html

    We are having a sudden issue where recipients of our secure envelope emails will open a message from us with attachments and they will get a "File Not Found" error message.
    We are still using a Post X appliance, but no config changes were made whatsoever and this started happening since last weekend. (Oct. 9-11)
    I did reboot the Post X box and thought the problem was fixed w/ the reboot. I sent a secure message to myself and then opened it along with the attachment and all was good. I sent the second test and the problem was back; "File not found".
    I have noticed that when I get file not found the address bar in my browser is pointing to: https://res.cisco.com/websafe/eo/error?error=notfound
    The time after rebooting when it did work it pointed to file on my local computer hard drive:
    file:///C:/Documents%20and%20Settings/mymachine/Local%20Settings/Temporary%20Internet%20Files/PXTemp/-6pAQ4_Y5hJEmKdQhtG8lhNx0zo!/PX_L_1255377132267.html
    Any ideas what could have caused this sudden issue? How do we resolve? I have a call into support, but they have been researching it all day and our secure mail is down!

    used bridge, didn't work.
    tried right-click, double click..open in program.
    same error.
    files work in other adobe products.....
    only way to get a jpg in there is to "paste" it in.

  • File not found error (no error number or file identified)

    Hi,
    I am getting a file not found error when trying to render a project. The message box does not identify which file is not found nor is there an error message number. I by trial and error tracked the file to a video connected to the PAL_Projector Menu. It is the PAL_Projector.m2v file. I reconnected it but it still gives a file not found error on render. Any suggestions and why do we get these ridiculous error messages in this day and age. The message should identify the file and how to fix the problem.
    Regards
    Richard

    gday
    Is the error on the client or server?
    What role in the application does applications-mapping.xml fulfill?
    How are you loading the file in?
    -steve-

  • WVC210 "File Not Found" error in IE9

    When attempting to access a WVC210 camera using IE9, I get a "File Not Found" error. I've updated the firmware on the camera to V1.1.1.15, and have reset the camera to factory defaults.  Under "Downloaded controls" in IE, it indicates that the Linksys210Viewer Control is enabled.  I can assess the camera just fine using Firefox, but not with IE9.

    I have had this exact same error on two different cameras. I installed the upgrade from a Windows 7 machinge on camera A. I can access the camera A from Windows 8 (with full functionality), mac and iPhone. But not Windows 7 (IE9). For camera B, I installed the upgrade using my Windows 8 machine. I can access the web interface for camera B from Windows 7, mac and iPhone, but NOT from the machine I installed from.
    I believe this is a browser issue, and have not completed the troubleshooting. BUT, this should give you enough information to go into your IE9 and determine what may have changed. If you resolve before me, please post.
    Thanks!

  • File not found error in SFTP channel

    Hi All,
    We are getting a "file not found error " while using a SFTP sender channel .
    Our Scenario :
    We are using SFTP as the source adapter .Presently we are using  two nodes for load balancing for all the sender channels.
    One of the node's of the  SFTP channel is picking the file , while the other node at the same time is throwing a "File not found error".
    The file is being picked and is placed at the target, but the channels are in error state as one of the nodes is in error state.
    Please let me know, if we did any mistake while configuring the adapter.
    Thanks,
    Yamunan

    Hi,
    Could you please check if you have provided right path in your sender communication channel...to pick the file from...
    Regards,
    Naveen.

  • File not found error 43 message. What is this?

    I transferred a project to a friends logic and everything transferred fine except for the fact that every time we start the tune we get the notification: File not found, result code = -43. After we click through the first error code window another pops up and it says: Fade update failed, (error -43).
    It is no big problem except for the fact that these come up every time we hit play. Then after we click through the error messages the song works perfectly.
    Any ideas?
    Thanks

    Hi,
    I have a 'file not found' problem with Logic Express. A while back I transferred all my Logic files to DVD to make room on the hard drive. It took 4 discs, saved alphabetically by song title. Now, I nearly always get the 'file-not'found' error message when I try to work on something. Sometimes when I click 'search' it finds the file, sometimes it doesn't. I'm confident that I didn't delete the files.
    Wondering if 'search' would find the files if I transferred all the files from DVD to a single folder on an external drive. I don't use the 'search manually' option, because I'm not really sure what I'm looking for, or where to look. In the other room, perhaps? 'Computer challenged' is me. Any suggestions?
    DS

  • File Not Found error (-43) when trying to record

    Never had this problem in the past, and haven't used Logic in a few months, but every time i attempt to record, i get that message: File Not Found, Result code error -43
    I am using the MBox 2 Pro as my record in, and Logic 6.4.3
    Thanks for the help...

    Hi,
    I have a 'file not found' problem with Logic Express. A while back I transferred all my Logic files to DVD to make room on the hard drive. It took 4 discs, saved alphabetically by song title. Now, I nearly always get the 'file-not'found' error message when I try to work on something. Sometimes when I click 'search' it finds the file, sometimes it doesn't. I'm confident that I didn't delete the files.
    Wondering if 'search' would find the files if I transferred all the files from DVD to a single folder on an external drive. I don't use the 'search manually' option, because I'm not really sure what I'm looking for, or where to look. In the other room, perhaps? 'Computer challenged' is me. Any suggestions?
    DS

  • File not found error on some computers running the same program

    Dim pList As System.Diagnostics.Process
    retval = 0
    PTRName = "F:\myprogram.exe"
    If My.Computer.FileSystem.FileExists(PTRName) Then
    System.Disgnostics.Process.Start(PTRName)
    pList = System.Diagnostics.Process.GetProcesses
    For each proc As System.Diagnostice.Process in pList
    If proc.ProcessName = "myprogram" Then
    retval = proc.Id
    Exit For
    End If
    Next
    If retval > 0 then
    'continue
    Else
    'error message
    End If
    End If
    PTRName = "F:\myprogram.exe"
    If My.Computer.FileSystem.FileExists(PTRName) Then
    Retval = Shell(PTRName,4)
    If Retval > 0 Then
    'Continue
    Else
    'Error message
    End If
    End IF
    I have created a program which:
    opens a file
    reads the records and massages the records
    writes the records to a new file
    Launches a program that uses the resultant file.
    The program was written on Windows xp MCE using Visual Studio 10. The resulting program works fine.
    I places The executable and the input file onto a flashdrive, and then tested it on other machines.
    Two of the machines are both Win 7 Pro 64bit with .Net 4. On one machine it works great. On the other I get a "File not found" error when starting the second process. This is the failing code:
    The problem is with the Shell command. When I rewrite it as:
    it works on both machines
    So my question is: Why does exactly the same code (The same flashdrive was used on both machines) work on one machine and not the other (when both machenes appear to be at the same level)?
    In both cases I verify the file exists in the correct place before I try to start it.
    Any help would be appreciated.
    Thanks in advance
       John 

    The use of F is just an example. I use:
    OutputPath = My.Application.Info.DirectoryPath 'Where app is run from (root)
        'Make sure the path ends in \
        If VB.Right(OutputPath, 1) <> "\" Then
          OutputPath = OutputPath & "\"
        End If
    to get the correct information.
    Then
      PTRName = OutputPath & "myprogram.exe"
    BTW "myprogram.exe" is not the correct name it is just an example.
    Sorry if this caused confusion
    However all of this is not the point. If:
     My.Computer.FileSystem.FileExists(PTRName)
    is true then the file is in the right place. Therefore:
    Retval = Shell(PTRName,4)
    must also work. However it does not on some machines.
    Is the problem in .Net, VB or VS because it is not in my code. 
    I have also used a routine similar to you (in VB6) to find a particular volume, but used the volume label. That worked better in my case.
    John

  • "File Not Found" Error after Restoring Sharepoint List

    Hello,
    I restored a Sharepoint List via Powershell and all seemed to work fine. The Import-Log sais 0 Warnings and 0 Errors.
    When I access the List now i can see all the Items, but when i click a Item to access it, i get a "File Not Found"-Error.
    May the Alternate Access Mappings be the Problem? The List is restored from another Sharepoint-Farm that was accessed by different URLs.
    What can i do to access the Items? Thanks for your help!

    How was this list moved? Using export-import? Do you still have the old list in the old environment? Can you turn off dialogs on the list so that we can tell where exactly it is navigating to? Can you also install fiddler to see the web hops?
    Pranav Sharma
    SharePoint Consultant, Portal Solutions

Maybe you are looking for

  • How to specify a custom User-Agent for an HTTPService call?

    I'm trying to have HTTPService send a custom User-Agent string in the request headers but it seems to ignore the header="" method. Is there any documentation on how to do this? Or would I have to use URLRequest instead?

  • Cannot create a computer account at start up

    Bought a brand new MAc book pro, and cannot get passed the installation set-up phase: All is well until the  "create your computer account" menu, which once filled in, takes me back to first set-up screen "Use english as teh main language".....basica

  • Navigating does not initialize BindingContainer

    I have 6-step process. The last step is a review (call it P6) and does overall validation on page load (implemented in PagePhaseListener after prepareModel phase). If it finds some errors, I want to forward to specific step and display it. If there a

  • BOM exlosion date and basic scheduling date

    HI gurus, I am new for SAP, and I currently learning basic date scheduling and BOM explosion. My doubt is if during requirement planning bom is exploded to determine requirements then, why again on basic start date bom is exploded? if this is only in

  • When I open Time Machine all I see is the desktop. Where r the other folders?

    All I see are copies of desktops that were bacjed up on my time machine. I can only restore the desktop. Where can I find the rest of hard drive contents?