Quicktime has audio, no video

Ever since "day one" of owning my iPod shuffle (over a year), Quicktime has never worked. I get neon color static on the screen, no video, but I do get audio. I have reloaded several times and finally gave up and just open my videos with Real Player. Today, I downloaded Quicktime's latest version alone (without iTunes) and I still have same problem with new latest program. Any suggestions? My videos are all Quicktime format.

Open QuickTime Player and under the Edit menu choose Preferences/QuickTime Preferences. This will open the QuickTime Control Panel.
Under Advanced tab and the Video area remove the check mark for DirectX and try Safe mode. Click the Apply button and try the file again.

Similar Messages

When I import a video recorded in Quicktime, the audio and video don't sync. Any solution?

When I import a video recorded in Quicktime, the audio and video don't sync. Any solution?

Where did the media file come from?
Does it use a variable frame rate?
What version of Premiere are you using?
Variable frame rate video problems:
http://forums.adobe.com/message/4897424#4897424
http://forums.adobe.com/message/4071506#4071506

Hey guys, trying to import an .AVI into my project but get a: File has audio or video stream.... Can you please help??!

Hey guys, trying to import an .AVI into my project but get a: File has audio or video stream.... Can you please help??!

Lots here:
https://forums.adobe.com/search.jspa?q=File+has+audio+or+video+stream

Downloaded video has audio, no video

I got my tv show, purchased from iTunes to dowload to my iPod, but I have only audio, no video. I am playing it from the video playlist, and it plays on iTunes. What am I doing wrong now? Thanks again.

I too am having problems with the video. I have purchased a season of sci fi, and watched several episodes, no problem. However I try to watch the latest episode that i purchased, and all I get is audio. Now, it is spreading to all my video's. Just sound? Battery ius good. Power is full. Music plays. Any Suggestions out there?

Quicktime has hijacked my video settings

After I downloaded iTunes, all online movie clips began playing in Quicktime instead of Windows Media Player. I was able to fix the problem by uninstalling Quicktime, but then I couldn't use iTunes. Gaaaa!
Any suggestions?

When you install Quicktime it should get to the point of asking you if it should be the default player, just say no. If this somehow happens with files that are already on your system, you should be able to hold the shift key down while right clicking on the file in question and choosing
"Open With". Then you can just choose what you want to open the file with as well as put a check in a box that says something like "make this the default program for opening", then it will only open with that program.

After exporting a video from imovie, to quicktime, the audio has been duplicated. How can I fix this?

after exporting a video from imovie, to quicktime, the audio has been duplicated. How can I fix this?

iMovie works best with uncompressed audio. If your track is MP3 or AAC, you may get better results by converting your track to the AIFF format and then using that in iMovie.
You can do this in iTunes. Go to iTunes/Preferences and click the General button. On the General page, click the Import Settings button. Choose IMPORT USING: AIFF ENCODER.
(note: remember what you changed it from so you can change it back later, before you import another CD)
Now, in iTunes, select your track. Then click FILE/CREATE NEW VERSION/AIFF VERSION.

.Mov files in CC : The File Has no Audio or Video Streams

I recently updated premier to CC , since i have issues iimporting any .mov files at all.
The specific ones Im trying for my current project are exports from AE , rendered lossless animation .mov , worked fine in CS6 , will play in quicktime and other generic's but always getting the The FIle Has no Audio or Video Streams message when trying to import into a project.
Quicktime is updated so I can't understand why the won't play, is this a CC bug ?
i go back to cs6 on my other comp they open fine...
Ive seen a few topics on this none with a resolution and most of those where from cam's, this is an export from AE, anyone able to help this is stopping me from working atm ......
troy

I can verify that Apple screen recordings without audio do not import into any Adobe premeier.
Details on screen recording from Gspot v2.70a:
H.264
qt : Apple QuickTime (.MOV/QT)
File Type: QuickTime (.MOV)
Mime Type: video/quicktime
Len: 1:03.083
Frms: 1,521
Qf: 0.153
Frames/s: 20.000
wx: 1280 x 800
sar: 1.600 (8:5)
However Apple (MAC OSX) screen recordings WITH audio will import.
I would think this should be fixable with hotfixes...
If you (adobe staff) have access to macbook pros 2012 or 2013 models, open quick time pro, do a screen recording, make sure no audio is recording, just your screen movements.. then export to 1080p video (mov is only option).. then on a windows PC try to import that file into adobe premiere. The file will play perfectly fine natively in windows with any player so long as a H264 decoder is available on that system... the problem here is Adobe Premiere. Not the users system.
Edit:
To help those with this issue.. just make sure when you render your mov that you have ANY kind of audio in it.. and just remove the audio track once imported into premiere. I know it's frustrating and you would think something as simple as not having an audio track wouldn't break premiere but alas... we have to work around the shortcomings until they decide to fix it.. just like the VFR issue in premiere.

Audio And Video out of sync in Final Cut, but not in quicktime

I heave searched the forums to no end to find the solution to this issue, unfortunatley, I have not solved the problem.
I am using Final Cut 4.5 on a G4 running OSX 10.3.4. This system has worked perfectly for years with no problems. Neither the system, hardware, or software has ever been changed on this machine. Suddenly last week, despite perfect sync while previewing the capture, the Audio and Video were of sync in Final Cut, but when checked in quicktime, there were no problems. That is how I eventually figured out this was a final cut problem.
By out of sync, I don't mean it is by a specific number of frames that can be adjusted and then everything is fine, the sync seems to drift so that if you edit the audio to be in sync in one part of the video, it won't be at the end. Also, it is out of sync from the first frame played, not a gradual drift.
This is definitely not an issue of frame rates or final cut settings as will be evident by the steps I took below to find the source of this problem.
This is what I did to attempt to fix the problem:
- Check drives using disc utility and repair permissions
- Remove Final Cut Preferences using Apple guidelines
- Switch hard drives
- Delete Final Cut and reinstall newer version of final cut (since the capture files played fine on Final Cut 5.1 on another machine)
- reinstall entire OSX 10.3.9, wiping the hard drive and reinstalling Final Cut 5.1
- switch ram slots, and even replace ram with different sticks from another G4 machine
None of these solutions worked. Is there some hardware problem with my G4 that is suddenly causing Final Cut to play audio and video out of sync?
Hope you can help, otherwise this otherwise great G4 is going in the dumpster!
Thanks

For what it's worth, I'm having what looks to be the same problem. Driving me insane. Here's what's going on-
Editing in FCP 6.0.2
QT was just updated to 7.3.1 the other day (hmm)
On an MacBookPro machine, OS 10.5.1
Software updater says everything's up to date of course.
DV-NTSC 24p (23.98) Advanced Pulldown Removal (footage was shot at 24PA on a DVX100b)
In Quicktime, the file previews fine, everything's in sync, everyone's happy. In FCP, the video and audio are wildly out of sync. I did a test inside of quicktime and sliced out a small portion of the media clip and did a "save as" and this small slice played in sync in FCP. However, this did not work for the entire clip. Clip is weighing in at 5.58GB for a 32 minute run.
I'm trying to multicam 2 tapes together and manually syncing these up is proving to be difficult at best. When anyone gets any ideas/leads/patches, let us know.
Grr,
Nicole
Editor, RHED Pixel

'File has no audio or video streaming' error -- I have codecs!

Hi!
I really hope someone can help me!
I am trying to import MOV files into Premiere CS5 (latest version, just downloaded last week) and I get the error message "file has no audio or video streaming.'
I can open these files just fine in Final Cut Pro X (which I hate, so hence why I am back on Premiere).
I already downloaded Quicktime 7, and the Quicktime Pro Codecs here (http://support.apple.com/kb/DL1396). When I tried to install those codecs, I got an error saying there is a newer version of the codecs installed on my machine.
My info:
Mac OS 10.6.8
Quicktime 10
(I read you also needed to download Quicktime 7 for some codecs. I did that, but it didn't help.)
Premiere CS5.5 (Trial)*
*I read the old trial did not allow you to import MOVs, but that the new trial does not have an issue -- so I'm at a loss as to what to do.

Here's the info of the original source files:
* * * Media Inspector 0.7.443 file analysis report.
* * * Media Inspector is ©2011 by Diego Massanti - http://mediainfo.massanti.com
* * * MediaInfoLib by Jerome Martinez - http://mediainfo.sourceforge.net
Created on: Feb 1, 2012 2:32:58 PM CST
Report for file: 0002QZ.MXF
General / Container Stream #1
          Total Video Streams for this File.................1
          Total Audio Streams for this File.................4
          Video Codecs Used.................................DV
          Audio Codecs Used.................................PCM / PCM / PCM / PCM
          File Format.......................................MXF
          Play Time.........................................4mn 55s
          Total File Size...................................3.96 GiB
          Total Stream BitRate..............................115 Mbps
          Encoded with......................................Panasonic P2 2.0
Video Stream #1
          Codec (Human Name)................................DV
          Frame Width.......................................960 pixels
          Frame Height......................................720 pixels
          Frame Rate........................................29.970 fps
          Total Frames......................................8850
          Display Aspect Ratio..............................16:9
          Video Standard....................................NTSC
          Scan Type.........................................Progressive
          Color Space.......................................YUV
          QF (like Gordian Knot)............................5.187
          Video Stream Length...............................4mn 55s 295ms
          Video Stream BitRate..............................107 Mbps
          Video Stream BitRate Mode.........................VBR
          Bit Depth.........................................10 bits
          Video Stream Size.................................3.69 GiB (93%)
Audio Stream #1
          Codec.............................................PCM
          Audio Stream Length...............................4mn 55s 295ms
          Audio Stream BitRate..............................768 Kbps
          Audio Stream BitRate Mode.........................CBR
          Number of Audio Channels..........................1
          Sampling Rate.....................................48.0 KHz
          Bit Depth.........................................16 bits
          Audio Stream Delay................................21h 58mn
          Audio Stream Size.................................0.00 Byte (0%)
Audio Stream #2
          Codec.............................................PCM
          Audio Stream Length...............................4mn 55s 295ms
          Audio Stream BitRate..............................768 Kbps
          Audio Stream BitRate Mode.........................CBR
          Number of Audio Channels..........................1
          Sampling Rate.....................................48.0 KHz
          Bit Depth.........................................16 bits
          Audio Stream Delay................................21h 58mn
          Audio Stream Size.................................0.00 Byte (0%)
Audio Stream #3
          Codec.............................................PCM
          Audio Stream Length...............................4mn 55s 295ms
          Audio Stream BitRate..............................768 Kbps
          Audio Stream BitRate Mode.........................CBR
          Number of Audio Channels..........................1
          Sampling Rate.....................................48.0 KHz
          Bit Depth.........................................16 bits
          Audio Stream Delay................................21h 58mn
          Audio Stream Size.................................0.00 Byte (0%)
Audio Stream #4
          Codec.............................................PCM
          Audio Stream Length...............................4mn 55s 295ms
          Audio Stream BitRate..............................768 Kbps
          Audio Stream BitRate Mode.........................CBR
          Number of Audio Channels..........................1
          Sampling Rate.....................................48.0 KHz
          Bit Depth.........................................16 bits
          Audio Stream Delay................................21h 58mn
          Audio Stream Size.................................0.00 Byte (0%)

Premiere Pro CS6 importing .mp4 = "The file has no audio or video streams."

Hi,
When I import an MP4 clip into Adobe Premiere Pro CS6, I get the following message:
"File Import Failure
151_0010_01.mp4
Error Message
The file has no audio or video streams."
I have the latest Quicktime, and I have reinstalled Premiere Pro CS6 a few times already. If anyone knows a fix for this, I would greatly appreciate it. My system and clip info are found below. Thank you, Robert.
OPERATING SYSTEM
Win 7 Ultimate 64bit
CLIP INFO
Complete name                         \BPAV\CLPR\151_0009_01\151_0009_01.MP4
Format                                   : MPEG-4
Commercial name                    : XDCAM EX 35
Format profile                         : Base Media / Version 2
Codec ID                                : mp42
File size                                : 1.76 GiB
Duration                                 : 7mn 5s
Overall bit rate mode                 : Variable
Overall bit rate                         : 35.6 Mbps
Encoded date                             : UTC 2009-07-19 04:22:10
Tagged date                              : UTC 2009-07-19 04:22:10
Video
ID                                       : 1
Format                                   : MPEG Video
Commercial name                          : XDCAM EX 35
Format version                           : Version 2
Format profile                           : Main@High
Format settings, BVOP                    : Yes
Format settings, Matrix                  : Custom
Format settings, GOP                     : M=3, N=15
Codec ID                                 : 61
Duration                                 : 7mn 5s
Bit rate mode                            : Variable
Bit rate                                 : 34.0 Mbps
Maximum bit rate                         : 35.0 Mbps
Width                                    : 1 280 pixels
Height                                   : 720 pixels
Display aspect ratio                     : 16:9
Frame rate mode                          : Constant
Frame rate                               : 29.970 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Compression mode                         : Lossy
Bits/(Pixel*Frame)                       : 1.231
Stream size                              : 1.68 GiB (96%)
Language                                 : English
Encoded date                             : UTC 2009-07-19 04:22:10
Tagged date                              : UTC 2009-07-19 04:22:10
Color primaries                          : BT.709
Transfer characteristics                 : BT.709
Matrix coefficients                      : BT.709
Audio
ID                                       : 2
Format                                   : PCM
Format settings, Endianness              : Big
Format settings, Sign                    : Signed
Codec ID                                 : twos
Duration                                 : 7mn 5s
Bit rate mode                            : Constant
Bit rate                                 : 1 536 Kbps
Channel(s)                               : 2 channels
Sampling rate                            : 48.0 KHz
Bit depth                                : 16 bits
Stream size                              : 77.9 MiB (4%)
Language                                 : English
Encoded date                             : UTC 2009-07-19 04:22:10
Tagged date                              : UTC 2009-07-19 04:22:10

I encountered a similar problem. I had quicktime files that would play in the quicktime player from the desktop, but wouldn't import the files "the file has no audio or video streams". I had just reinstalled quicktime, and Premier with no change. Finally realized that we had Barracuda protection that was at fault. It was preventing communication to the quicktime codec and thus Premier could not interpret the footage. Another symptom, I would also launch After Effects and it would tell me that quicktime wasn't installed.
I solved this by uninstalling Barracuda. We reported the fault to Barracuda, and have not seen any change in the software.

Import failure - GoPro Hero4 4k30fps -"The file has no audio or video streams"

I am trying to import a 4k30fps video from a GoPro Hero4 Black and I get this message "The file has no audio or video streams"
I have tried importing in a number of different ways, does anyone have any help or advice?
I am using Windows 7 64 bit and Adobe Premiere 8.0.1 (21)
Thank you

Uninstalling and reinstalling a "Typical" Apple Quicktime installation seemed to fix the problem.

The file has no audio or video streams

Before posting this question, I did a quick search and found out someone else has already reported this problem, and the cause seemed to be the absence of Quicktime player when importing *.mov files. In my case, i do have quicktime on my PC and as a matter of fact, the export worked perfectly with these *.mov in my sequence before.
Today when I open my project, these *mov files became offline. And when I tried to Link Media, it gave me the no audio or video streams errer. What is wrong with it? I have not done anything to PP since the last time when everything was perfect.

Never mind. I just figured it out myself. I installed bluestacks emulator on my PC that apparently confused the system. After uninstalling it, PP is working fine again.

After I upgraded to Mavericks, Quicktime has had to convert MPEG-4 videos to .mov

After I upgraded to Mavericks, Quicktime has had to convert MPEG-4 videos to .mov.... Why? Is there a way to stop that or to change the settings?

After I upgraded to Mavericks, Quicktime has had to convert MPEG-4 videos to .mov.... Why? Is there a way to stop that or to change the settings?
Your question requires more information. What does MPEG-4 mean to you? What file container and which compression formats are you referring to here? Is the MPEG-4 content "standard" or proprietary. Basically, depending on the file container and the specific content, QT X v10.3 may initiate a conversion ever where the individual data tracks are fully QT compatible. Proprietary compression formats will definitely do this. In some cases, the audio or video in one source container may simply be passed through to the MOV file while in another source container, QT X v10.3 forces a conversion of that same data track. In short, there are too many variables at this point to properly answer your question or attempt to duplicate your workflow.

Audio and Video option missing from Export Quicktime Movie Include

Today as I was exporting a clip, I noticed that the Audio and Video option was missing from the Include drop down. I only have the options of Left, Center, Right.
I highlight the sequence, control E (or File>Export>Quicktime Movie) and the Save window comes up. The Settings drop down is the same, the Markers: drop down is the same, but the Include: has the options of Left, Center and Right. I thought the Video and Audio dropdowns were always there. I hate to admit it, but I have not paid attention to them in a while. Getting old I guess.
Sequence settings is 720x480 NTSC DV (3:2)
NTSC - CCIR 601 / DV (720x480)
Lower (Even)
29.97
QT Video Settings
DV/DVCPRO - NTSC
100%
Audio
48 kHz
16-bit
Channel Grouped
Did I miss something?
Thanks

Thanks, forgot about that.
For what ever reason it started working correctly a couple of hours later, after I started an SD project. The video came out fine
I had been trying out a couple new applications, so maybe one was causing it. I will see if it happens in the future.
Jim

Separate audio and video inputs for Quicktime Broadcast?

I want to produce some real time streaming via Quicktime Broadcast. My audio will be coming from a Mackie mixer with firewire interface, the video will be coming from my video switcher which has a firewire output. Will I be able to combine the audio and video firewire feeds in the computer (or software), or must I combine the audio and video into one firewire feed before it hits the computer?
Thanks!
Rob Cook

I just did my first feed Monday night. I used a video mixer and Mackie board myself. I feed the audio and video(component) into my DSR-20 VCR, which I also use for a tape backup recording. This then feeds the QT Broadcaster. I don't think you can feed anything but a firewire machine or iPhoto camera into Broadcaster. Might work with an USB camera/vcr???
I feed H.264 video, at 320x240 with mono 16 bit audio. Hint... don't do disolves, as they increase the frame rate. simple cuts-only seems to be the best. We also fed keynote slideshow into switcher... carefull there, as it produces saturated colors that will effect the signal... the switcher will think the super saturated video is sync and glitch the video. red is the worst, of course. Next week I am going to use a little proc amp to drop the chroma a bit.
G5 Mac OS X (10.4.8) Dual 2.5, PPC, 2.5 Gig Ram

Quicktime has audio, no video

Similar Messages

Maybe you are looking for