Quicktime has suddenly not worked with any movies I have.

Yes, I've downloaded many .avi movies and they would all work with quicktime. For example, once completely downloaded, the movie would have a small icon of the actual movie, probably the first frame. Anyway, I have no idea when I stopped working, but I dl'd Adventureland today and whenever I double click to open it with QT, I get "The movie 'Adventureland.2009.DvDRip.AC3-FxM.avi' can't be opened." It then says I may need to install additional files to open it. I have VLC to watch it, so that's not a problem, however I'm concerned about what's going on. I have QT X and though I've tried to download 7.6.6, it won't let me because of QT X. So idk what's going on. Any ideas?? I also have the most current DivX codecs installed so I know that's not it. I'm going to try it with older files I've downloaded.

Any file that has DvDRip in its name is bound to be trouble.
http://perian.org

Similar Messages

MyDAQ fails Self-Test and will not work with any software

I cannot get the myDAQ to communicate properly. I did everything I could to make sure that the device was detected by the computer. It shows up in Device Manager under Data Acquistition Devices as NI myDAQ and in NI MAX as "myDAQ1", but I receive errors when trying to use it with any NI program.
Trying to self-test or reset the device in MAX gives these errors:
-The self test failed. -88705 The specified device is not present or is not active in the system. The device may not be installed on this system, may have been unplugged, or may not be installed correctly.
-There was a problem resetting the device. Error code: 80040383.
It also gives this error when trying to use the Elvis Oscilloscope:
-Error -200324 occurred at ELVISmx_DAQmx Create Channel (AI-Voltage-Basic).vi:1
Possible reason(s):
NI-DAQmx is unable to communicate with the device. Make sure the device is present in and accessible to the system, is not currently being reset, and is not reserved by another driver such as Traditional NI-DAQ (Legacy).
I have uninstalled and reinstalled and repaired all installed NI products twice. I updated to NI-DAQmx 9.8.0 and am using NI Elvis 4.5. I have checked NI Device Loader and mDNS Responder Service in Services and everything is running properly. I have also tried Reset Configuration Data in NI MAX several times. I turned Fast Startup off as suggested in one article. I have tried plugging it into every single USB port on my computer; all 8 of them. The blue led is on when plugged in, but I cannot figure out why it will not work with any of the software. I am running Windows 8 Pro 64-bit. Also, it completely works on the school computers running Windows 7 without any problems. I would like to have it functioning with all the NI software purchased, but all I want to do is use the oscilloscope software for now. It has honestly been way too much work and a huge loss of time for something that should work out of the box. Please help me resolve this, thanks.
Attachments:
ni_support.zip ‏341 KB

Hi chaka123,
I had already read that article so it wasn't anything I hadn't tried. I did, however, uninstall both NI DAQmx and NI ELVISmx, ran the registry cleaner and then plugged my device in. Now it shows up as USB Flash Firmware Updater. This is actually what it showed the first time I plugged this in out of the box. After much troubleshooting I was finally able to get it to at least recognize it as a myDAQ. This is problem I know others have had.
To answer your questions:
Does the Test Panels work at all?
I am not sure, I didn't try it before uninstalling. Now the Test Panels isn't an option because it is recognized as the Flash Firmware Updater.
Have you tried to delete the device in MAX?
Once again, I cannot because it shows up as Flash Firmware Updater.
Which is the color of the icon on the left side of “myDAQ1”?
It was green before the uninstall. Now it shows the USB symbol.
I tried deleting the driver. When I plugged the device back it, Windows started automatically trying to load a driver for it. Now it shows as NI myDAQ with a yellow exclamation symbol. In MAX it shows as NI myDAQ with a USB symbol. Under Driver Details it says "Windows does not have a driver associated with your device."
What folder can I manually point Device Manager to in order to load the correct driver?
Attachments:
devicemanager.PNG ‏40 KB

Iphone 4 model MC603B/A is not working with any sim card

Hi,
I just bought myself a Iphone 4 and it is not working with any sim card so far. So far I tried everything, even bought sim cards from different countries to see if that would work. I tried the sim cards in others phones and are working correctly in those.
Several websites says that this phone is from the UK?! but even the sim cards from the UK arent working.
I have the legit firmware form iTunes and im up to date. (no jailbreak or what so ever)
Let me how to fix it.
Gr. WIlliam

No, it is NOT OK to talk about jailbreaking either.
As for why it is criminal, ONLY the carrier has the legal right to authorize unlocking it. In some countries (as it was in the US until recently and may be again soon) it is legal for an individual phone owner to unlock thier phone, it is not legal for a 3rd party to do so. Also, those services are not just "unlocking" the phone, they are gaining unauthorized access to a commercial database. That is a crime in almost every civilized country.

Has anyone not working with .dv files had synchronization problems?

Has anyone not working with .dv files had sound synchronization problems? I'm not exactly sure what the alternatives to DV are, but I think one of them is HD.
The reason for asking this question is to help isolate the nature and cause of a very serious flaw in iMovie '11. In the original release of iMovie '11 (version 9.0) there was a small--but serious--synchronization problem. In the 9.01 there is a large synchronization problem. We know of one person who has not experienced the problem, and he is not working with DV files (media). So we want to find out if anyone who is using something other than .dv files is experiencing a lack of synchronization between sound and picture. Knowing the answer to this will help with figuring out where the cause lies. For the initial iMovie '11 release (9.0), you probably would not notice a problem unless you had very long event-clips, e.g., two hours long. Events get this long if you are transferring from analog 8 mm tapes. Even then, it would have to be in scenes in which the connection between event and sound is obvious, e.g., close ups of people talking. It isn't until the 9.01 release that most people would notice anything. All we need to do is establish one case of a synchronization problem in which the person is using something other than DV.
Message was edited by: Paul Bullen

Hopefully, the 9.0.2 release will make my question moot. Zyfert must have posted the announcement of the release just as I was formulating my question. Still, if you have information on the subject, it would be interesting to hear.

Why facetime does not working with any carrier in u.s expect att although the iphone is factory unlocked

why facetime does not working with any carrier in u.s expect att although the iphone is factory unlocked

Facetime only works via WiFi. Are you trying to set up Facetime with a T-Mobile account?

I am running 10.8 and I am trying to get a E-mu 1x1 midi/usb connector to work with my keyboards. It's not working with any keyboard at all. I believe it is a Mainstage/Mac issue. Mainstage can recognize the the interface but it won't work.

I am running 10.8 and I am trying to get a E-mu 1x1 midi/usb connector to work with my keyboards. It's not working with any keyboard at all. I believe it is a Mainstage/Mac issue. Mainstage can recognize the the interface but it won't work.

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

HT4061 hi i have purchased iphone4 from vodafone australia 2 years back.it is unlocked, when i went to india .it was not working with any carrier in india.it was displaying no service.is it a problem of iphone or any other anybody please could let me know

hi i have purchased iphone4 from vodafone australia 2 years back.it is unlocked, when i went to india .it was not working with any carrier in india.it was displaying no service.is it a problem of iphone or any other anybody please could let me know?

Hi ashish,
Did you contact TPG about activating International Roaming before you left for India:
http://www.tpg.com.au/support/international_roaming.php
Cheers,
GB

My macbook is not working with any headphones!!!!

i have a problem my macbook is not working with any headphones
can any body tell me why is it doing this?
or how i can tell if its just the headphone jack w/o taking it to an apple store? I really dont have the time until the end of the semester and i dont want my macbook crashing on me when working on a project.
thanks in advance

When you plug the headphones in can you still hear the audio through the MacBook's built-in speakers? If you can then you may have a physical problem with the audio port on the MacBook. In any case, you should check to see if the headphones are being recognized in the System Preferences -> Sound control panel (under the "Output" tab). Note that it is possible to have different volume/mute settings between the speakers and the headphones so you need to check the Sound control panel to see if you have the headphone output set to mute. When I plug a set of headphones into my MacBook the output name in the Sound control panel changes to "Headphones" from "Internal Speakers." You should check to see if you see the same behavior on your MacBook.

Nano 4g will suddenly not work with alarm clock. What happened?

As of the last time I synced it, my iPod nano 4g will not work with an alarm clock. What happened? It doesn't work with mine or with my roommate's, and her iPod will work with my clock. My iPod will PLAY in the clock dock if I turn it on and hit play, but won't wake up and play anymore as an alarm. I tried setting the alarm on the iPod instead of on the alarm clock, and that doesn't work as a fix (it won't make the clock wake up). ARGH.

Robert116 wrote:
Yeah, mine won't work. Just started acting up this week.
It doesn't work at all. I can set the alarm for any time, and it simply doesn't go off. I got a replacement phone of the same LG Accolade model, and it doesn't work either.
I switched the clock display settings, thinking there might be a glitch there. Didn't work when I changed it, or when I put it back to my original settings.
Agh!
Hi Robert116,
Please ensure that you have software version VX560V04 installed on your phone. For instructions to view software version please visit this LINK.
If you do have the correct software version a LG Accolade VX5600 - Master Reset may resolve the alarm clock issues outlined on your post. A master reset will resolve issues if any of your phone's system files became corrupted.
Please keep in mind that a master reset will erase all data and restore preferences to factory default specifications. Performing a hard reset is only recommended when the existing data has been backed up or is unwanted. Please backup your information before you do a master reset.
VX560V04

Itunes has suddenly stops working when any player connected

Itunes has always worked fine on my HP laptop running Vista. With no changes in configuration or software, Itunes has suddenly stopped working any time an Ipod, Nano, or Shuffle is attached. I have tried to reinstall all software, restart computer, checked devices for updates. Have also tried solutions published on Apple support page. Nothing works. Itunes starts and works fine until a device is connected, but then I get the message that the program has stopped working and needs to close. Occasionally the whole system crashes and I get a "blue screen" error.

Hi Betsey,
Try the general tips in this article: http://support.apple.com/kb/TS1717
-Jason

Gmail suddenly not working with Apple Mail

My gmail suddenly is not working with Apple Mail.
It said my username or password is wrong, but it was okay this morning.
Nevertheless, I deleted my gmail account, and re-setup it using Internet Accounts from System Preference.
However, I got the beow message:
There was a problem setting up the Mail account. An unknown error occurred.
I am sure my username and password are correct because I just login it using Safari.
Does anyone know what the cause is?
Please help~~~

Gmail not syncing in mac mail is a problem that is also in snow leopard since the new year.
OSX 10.6.8 is the highest OS that will run on an Intel Core 2 Duo. Do not try to install Mavericks on this machine! I will install, but turns it into a dinosaur and many programs will no longer run.
I had an issue with Mac Mail not syncing with imap.gmail.com. and Safari not being able to find apple.com.
This was resolved by working with an upper level tech support member for several hours deleating particular system library files, uninstalling most addons, reseting system network settings and a whole lot more! (too much to name here)
Thank you Apple Tech Support.

Touchsmart webcam not working with any messenger programs.

My Cam doesnt work with any messenger programs.. (yahoo, msn, skype...) Just bought it right before christmas and appearantly im not alone in this... can anyone help? its the only way my husband and i can see each other because he is deployed to Iraq. Please help!!!

Hi.
first - please go to tools>options on skype, choose whichever is right for camera options and make sure the correct camera is appears in the drop-box. Anything with "hp-camera" or "cybershot" will do.
if it still doesn't work you will need to open the touchsmart software and disable the camera usage through that software - because once a software uses the webcam - any other software cannot do use it. ( just like you cannot use the camera on skype and on msn messenger at the same time.
here is the HP artical about hoe to enable webcams on touchsmarts - its long , but might be helpful
http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c01923517
hope this helps, let us know how it goes.

Mainboard is not working with any cards except mine(GeForce2 MX400)!

Dear friends!
I have sent a message but noone understood!
My problem is simple.
My mainboard is i845 MSI 6528LE!
My graphic card is INCA MX 400 Ge force2!
My mainboard is working good with this graphic card.But it is not working with other cards!For instance Winfast MX440,Asus FX 5200,Ati 9100,Ati 9200SE...
Why!I tried lots of things.Bios update, i845 driver update...
Please is there anyone who understand tis problem in MSI?
Thanks!...

Quote
Originally posted by volkankarakus
Hi this is my PSU model and spesifications
SOLARMAX
Model:KC300 ATX
Input 115V/230V AC 50/60
Output 300W Max
+5V 20A +3,3V
+12V 12A -12V
+5VSB 1,5A -5V
Thanks!
Weak PSU is all I could say. 300watts can't even support a P4 stablely, not even to talk about combining a P4 to any new VGA cards... Get a better 400watts or more PSU with +3.3v at @ least 26A, +5v at @ least 35A and +12v at @ least 18A.

Why does my left earbud not work with any earbuds?

my left earbud skips and dosent work with any earbuds even ones i just bought from the store.

Hi,
joe12345757 wrote:
my left earbud skips and dosent work with any earbuds even ones i just bought from the store.
How does your left earbud not work with other earbuds? Do you mean the left earbud doesn't work with your iPod?
---likeabird---

My board is not working with any graphic cards except mine(mx400)

Dear friends!
I have sent a message but noone understood!
My problem is simple.
My mainboard is i845 MSI 6528LE!
My graphic card is INCA MX 400 Ge force2!
My mainboard is working good with this graphic card.But it is not working with other cards!For instance Winfast MX440,Asus FX 5200,Ati 9100,Ati 9200SE...
Why!I tried lots of things.Bios update, i845 driver update...
Please is there anyone who understand tis problem in MSI?
Thanks!...
0t is not a power suply or voltage or driver problem okey!!!!

I understand that you are frustrated, but it will help us all to help you if you create a Signature with all the info, and specs of your PC...As this info will keep us from having to guess for example, What Operating system are you running? Windows, Linux?, if Windows what version?, What type and speed Memory are you using? What type of CPU, a P-4, a Celeron, what speed?.ect. What Voltage is the Mem. set to, Voltage of the CPU?...These are all things that we need to know..Otherwise if we do not have this info we have to guess....So please we want to help ..But you have to give us all the info we need ...Sean REILLY875

Quicktime has suddenly not worked with any movies I have.

Similar Messages

Maybe you are looking for