QuickTime install mac os x 10.6.7
Why can I not install the new version of QuickTime? I get an error message saying my Mac already has "QuickTime X" so it won't install QuickTime 7. How the **** do I get rid of "QuickTime X" so I can install the new one so I can watch this **** movie I have been trying to watch for the last 3 hours?!
I like how I'm not allowed to say "h*ll" or "d*mn."
Similar Messages
-
"After Effects can't find Quicktime installed on this system" error message. Using Mac 10.9.2
First time I've had to launch After Effects Creative cloud on my new mac running 10.9.2
I keep getting an error message saying AE can't find quicktime installed on this system.
I've been able to work in After Effects but can't make a quicktime movie from a composition.
Anyone have this problem solved yet?
JMThis should help: troubleshooting QuickTime errors with After EffectsIf not, try this: fixing permissions problem that impedes start of Adobe applications
-
I just installed Mac OSX (10.6.8) and can not get Quick time player to work. When I go to the Apple site to download a version that will work, it states that Quick Time Player automatically comes with OSX. What do I need to do to use Quick Time Player with 10.6.8
Mac OS X 10.6 includes QuickTime versions 10.0 and 7.6.3. The QuickTime 7 player will only be present if a QuickTime Pro key was present at the time of installation, or if specified as part of a custom install, or individually downloaded:
http://support.apple.com/kb/dl923
Snow Leopard update 10.6.4 included an update to 7.6.6 (if installed). You can install it from the above link even though it says for 10.6.3. It's the same version of QuickTime Player 7.6.6.
(Only QuickTime Player 7.6.3 or 7.6.6 can be updated to "Pro".) -
AE CC 2014 says I dont have quicktime installed
Just install AE CC 2014 on my Mid 2012 Retina Macbook Pro. Besides taking forever to load it says that I dont have Quicktime installed, which I do have installed as quicktime is built INTO Mac OS X which I am running the latestversion of. Not sure how to fix this issue and is a complete waste of an install if I cant get this resolved.
Hmm, I'm sure IE should be able to do it though I use Chrome as a rule. Perhaps you have an overenthusiastic pop-up blocker. Any help here? https://www.apple.com/uk/itunes/gifts/
tt2 -
Installed QuickTime7 from Snow Leopard 10.6.8 installation disc and still can't view videos on iPhoto. A box appeared saying "you have installed Mac OS X software older than your current version of Mac OS X and may not work properly." Now what?
Download and install the latest QuickTime Player for Snow Leopard > http://support.apple.com/kb/DL923
-
I can´t watch movietrailers on Itunes movietrailers. It tells me to download Quicktime but I already have Quicktime in Mac OS X? I can´t update Quicktime either?
Mac OS X 10.6.8
Quicktime player 10.0
Do I need to download Yosemite?Mac OS X 10.6 includes QuickTime versions 10.0 and 7.6.3. The QuickTime 7 player will only be present if a QuickTime Pro key was present at the time of installation, or if specified as part of a custom install, or individually downloaded:
http://support.apple.com/kb/dl923
Snow Leopard update 10.6.4 included an update to 7.6.6 (if installed). You can install it from the above link even though it says for 10.6.3. It's the same version of QuickTime Player 7.6.6.
(Only QuickTime Player 7.6.3 or 7.6.6 can be updated to "Pro".)
A Mac OS X v10.6, OS X Lion, and OS X Mountain Lion-compatible version of QuickTime Player 7 is available for use with older media or with AppleScript-based workflows. QuickTime Player 7 can be used to playback formats such as QTVR, interactive QuickTime Movies, and MIDI files. Also, it supports QuickTime 7 Pro registration codes for access to QuickTime Pro functionality.
How to install Quicktime Player 7 on Snow Leopard, Lion and Mountain Lion when it is not already present:
http://support.apple.com/kb/HT3678?viewlocale=en_US&locale=en_US
Quicktime Player 7 for Snow Leopard OS 10.6 available here:
http://support.apple.com/kb/DL923 -
How to Remote Install Mac OS X on MBP
I have taken out my cd drive to install a second hard drive, but when I opened iMovie it says that i am missing an important quicktime file that is needed to import, export, and save files.......and to put in the install disks again to reinstall it. I tried to put my mac os x disk in a macbook in order to remote install mac os x using the macbooks cd drive. When i restart my MBP and hold option to select the remote disk it doesn't show up nor does it have the drop down menu to select the network. Please help......I am on a wireless network with no password.
Most people who do this put the optical drive in an external enclosure for just this event.
If you have another computer with a Firewire port or if the MacBook has a Firewire port, then see Transferring files between two computers using FireWire.
You can also clone the installer DVD to an 8 GB USB flash drive so you won't need to rely on an optical disc or drive in the future. -
Problem trying to install Mac OS 9
I've had Mac OS X 10.4 installed for a while on this system but after recently upgrading to a new Mac I thought I'd turn this one into a legacy computer to run all my old software. So I used my Mac OS X install discs to wipe the hard drive and install Mac OS 9 drivers but when I tried to install Mac OS 9.2.1 it just shows a floppy disk icon with a blinking question mark. I've tried a few times, reformatting and making sure I installed the Mac OS 9 drivers again but it still doesn't work. Even tried resetting the PRAM with no luck. I can install Mac OS X fine on the system but the Mac OS 9 disc refuses to play ball. I know the Power Mac G4 Digital Audio came with a system specific version of Mac OS 9 but I was told that Mac OS 9.2.1 should be fine.
Any help would be appreciated!Does your friend's iBook have OS 9 on it? If it does, try starting either computer in target mode (with a firewire cable connecting the two). Then simply drag the OS9 system folder onto your G4. Once the file transfer is complete, open the system folder and double click on the finder and system file. Neither should open, but that lets the computer know they are there. Restart your G4 to see if this works. I would upgrade to 9.2.2 then.
-
After installing Mac OSX Snow Leopart 10.6.3 my HP Photosmart C5500 won't scan to computer. The printer is working. What do I have to do to be able to scan again?
Often, you have to download updated vendor software drivers when you switch operating systems. HP doesn't list a C5500 on their web site, however, here's the link to the OS X 10.6 C5540 software. If you have one of the other C55xx models, look for the updated driver/scan software on their software/driver download section of HP.Com.
-
Problem installing Mac OSX on my new MacBook hard drive...
Hi,
i am beside myself again...(i just visited my local Genius bar this afternoon). Any help would be most appreciated! :o)
i purchased a 2.5 inch SATA Fujitsu 120GB laptop hard drive for my new MacBook. Followed the awesome* instructions on "how to replace/upgrade hard drive", and took out the original Toshiba HD. What the instructions* failed to mention was that i would eventually need to use a Torx screwdriver (star-shaped) to remove the caddy/carriage from the Toshiba HD. Got that the next day and replaced the Toshiba 80GB with my new 120GB Fujitsu drive..., it slipped into place nicely but i did notice that the Toshiba had four short wires protruding out to the right of the contacts, which my new Fujitsu didn't have... hmmmm...?!
anyways, tried to install Mac OSX on the new drive, booted up with the install disc... went thru' chosing the language (English), agreed to the second step... but when it came time to install, there was NO icon at all in the box where i am asked where i want to install it!!!
so i go to disk utilities, and see that my Fujitsu HD is indeed recognized, but none of the buttons in first aid are active... so i can't check it.
i figured that had to do with the four little wires, so i replaced the original Toshiba and made a reservation with Genius Bar to ask for assistance.
this afternoon, i explained my problem and was told the four wires have NOTHING to do with it... Lawrence (the genius) told me to (actually, first he said Apple does not recommend my doing this... and that i should go to a 3rd party computer store such as Dino to get help!) go back to disk utilities and partition, then erase this drive and then i will see the icon for this drive in the install box.
Well i did everything i was told to do and... still, there is no icon for my Fujitsu HD! :o(
I was able to partition, after which there was a disc0 under the Fujitsu drive on the left side of the disk utilities. When i go to system profiler, and click on ATA... it too shows the Fujitsu drive... but i cannot install because there is NOTHING to click on at the installation step! the "continue" button is not active and only the "back" button is actively mocking me!!!
i know many of you have successfully upgraded your hard drive... what am i doing wrong? Would a different brand work better? I know Seagate is quite popular, and OWC sells a Western Digital version as well as a Hitachi... do those four little wires make a difference? Would the Seagate come with those wires???
i am going crazy... thanks, and sorry for the long post, just wanted to let you know what i've done!
blue skies,
ps. please feel free to email me at [email protected] if you think that would be better! :o)Hi,
...after getting back from school, my MacBook was STILL in the process of verifying and "supposedly" repairing... since i was gone for over 10 hours, i finally assumed the drive was either defective or just incompatible, and quit disk utility.
...this morning i went out and bought a new Seagate 120GB SATA (they didn't have 160GB SATA drives, only 160GB ultra-ATA drives) 2.5 inch HD. This one DID have those four wires to the right of the contacts... (i don't know how important they are), and after changing and exchanging the Toshiba/Fujitsu HDs, it was a breeze putting in the new Seagate drive.
Erased > patritioned > and sure enough, the icon showed up and the biggest smile showed up on my face as i finished installing! :o)
I contacted the original seller of my fujitsu hd (it was a 2.5 inch, 120GB, serial ATA notebook drive) and he was kind enough to say "just pack it up and send it back for a refund!" (minus shipping and re-stocking fees of course! :o)
Just wanted to mention that, the fujitsu hd WAS recognized by disk-utility and at the bottom left of the window it said that the fujitsu was "GUID partitioned"..., so i am still scratching my head as to why it didn't work?!
I want to thank everyone that offered advice, it was helpful and i feel more comfortable with my MacBook after this trying and very frustrating episode! :o)
blue skies, -
How to make a image file from Pre installed Mac osx ? "PLEASE HELP :("?
hey guys ..Thanks u for the time.
So i have this eMac which has crashed and i have got may hands on another eMac.. and it works
... the only problem is.. I can take my eMac to the working eMac to do Target Mode or any thing...
So Help me..
My question is .. Is there a way to make a .DMG image file from pre installed mac osx OR
Is there a way to may a recovery disc??You can use Carbon Copy Cloner to copy everything from the working eMac onto the non-working eMac while the working eMac is running. If your eMac will still do target mode into the working one, you can download the above software, select the booted drive as the source drive, and your eMac's drive as the target, however it is possible this will not work.
When you say your eMac crashed, what exactly happened? It is possible that the hard drive in your eMac failed or is failing, so in order to get it running again you would need to replace the hard drive. On the eMac, this repair is somewhat involved, and you have to be very careful because it exposes the CRT, which has several areas which can be extremely dangerous to touch if not properly handled. CRTs retain a great deal of voltage, even when unplugged, sometimes for weeks, and they can give you a nasty shock if you touch them in the wrong place.
Also keep in mind that cloning from the working computer to the non-working computer will ERASE any data that you have stored on that eMac, so if you don't have it backed up anywhere, you may want to attempt that with target mode before proceeding.
Good luck! -
I have just purchased an iPhone 4, but it wasn't connecting to my iTunes, so I took advice and uninstalled iTunes. But when I am trying to reinstall iTunes, it keeps telling me that I cannot because I have a newer version of Quicktime installed. I cannot find this newer version anywhere, and have gotten rid of the Quicktime folder, but it is still refusing to install iTunes.
Please help, I have tried everything.But when I am trying to reinstall iTunes, it keeps telling me that I cannot because I have a newer version of Quicktime installed.
That's usually caused by damaged QuickTime installation configuration information on the PC.
Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
(If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.) -
How can i install Mac OS on toshiba intel celeron satellite L450-9P
can i install Mac OS on in Windows 7? for dual-boot purpose
But you can install Windows on a Mac via Bootcamp for dual boot.
For the purposes of Windows®, a Mac is just a generic piece of PC hardware, so installing on to it is permitted by Microsoft's EULA. On the other hand, Apple have explicitly stated in the EULA for OS X "Mountain Lion" that it should only be installed and run on Apple-branded hardware. Section 2, Paragraph B, Sub-section 1:
you are granted a limited, non-transferable, non-exclusive license […] to download, install, use and run for personal, non-commercial use, one (1) copy of the Apple Software directly on each Apple-branded computer…
(emphasis mine)
Section 2, Paragraph H:
The grants set forth in this License do not permit you to, and you agree not to, install, use or run the Apple Software on any non-Apple-branded computer, or to enable others to do so.
Also, discussion of how to run OS X on non-Apple branded hardware is against these forums' Use Agreement, Section 2 Paragraph 8, including Sub-section 1:
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
This thread'll be reported by someone if any salient advice is offered that enables the OP in his endeavour. -
I installed Mac OSX Snow Leopard 10.6.3 And now my Java is not working,what can I do to fix's this?
Run Software Update to get to 10.6.8 and update Java.
-
please help
I want to install mac os but I do not know what should I do to make it run on mac os my notebook.
I am not a native apple notebook but my notebook is toshiba
Thus I have to say, for the attention I would like to thank you very muchYou cannot legally run Mac OS X on anything other than Apple hardware.
If you want to use Mac OS X, buy a Mac.
Maybe you are looking for
-
Hi, Can some one tell how it works the payment terms and discount. I have one Payment Term with 30 days, 3% Discount, 60 days 1% discount 90 days not discount. When I book and invoice say on 20th-Apr-09 and gives baseline date same as invoice date as
-
Installing Oracle 10g on Linux/Unixwhat
for installing the Oracle 10g on Red Hat Linux 4 and Sun Solaris 10, how can I 1.Initialization Parameters: determine the amount of physical memory; I need to change the default setting from 40% to 60% when I change the value I got an error then when
-
HELP REQUIRED FOR GREETING CARD SIZES IN PSE10
I've wasted hours trying to find how to obtain 5" x 7" folded greeting card sizes. The default menu only offers four sizes, all for flat cards but according to the Adobe Photoshop Elements 10 "Classroom in a Book" I should be able to select a 5" x
-
Live Text Template - Very slow to update
Started using Live Text Templates which in theory seem really great but they are SOOOOO slow to update. So I create a simple 5 sec title with two text elements which simply fade in at the start and fade out at the end. The back ground is plain colore
-
Any risks if call interface and database not matched?
hi experts, are there any risks if the call interface of connection pool and database (in physical layer) matched ? for example, the call interface of connection pool (in physical layer) is selected to "OCI 10g/11g" the database (in physical layer) i