QuickTime installation error message....PLZ HELP
The installer has insufficient privileges to access this directory: C:\ProgramFiles\QuickTime. Installation cannot continue. Log in as an administrator. This is the message i get when installing QuickTime. I am logged in as admin. and ive also tried changing the file name and it wont let me do that either.
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?
Similar Messages
-
well hes the thing my other comp was reformatted and my friend is still fixing it right now and im on my other one right now. the problem is when i put in my ipod video cd i put in my serial number and it installs but when it get to installing itunes i get the ******** message
ERROR 1406 could not write value to Key\software\classes\.cdda\openwithlist\itunes.exe
this never happened when i had my other comp plz help cause i cant use my ipod video
ipod Video 30GIG Windows XPi bought my ipod video on boxing day and instaled it on my comp after i while my comp start acting funny and it wasnt work the way it should so i reformatted it but after i had no sound lol any way i dont have my comp so im using my sisters and im trying to put itunes on it but i get the message i told you ealier and i did the delete regist thing like i also staited but still nothing! how can this be?
-
Quicktime Installation error message
I have been trying to install iTunes and keep getting the error message "The older version of Quicktime cannot be removed. Contact your technical support group".
I followed some of the instruction from previous posts. I've deleted any file with "quicktime" or "qt" in the name, restarted and tried installing just QT w/o iTunes. Still keep getting this error message. When I tried just installing QT, during the installation I got an error message saying it could not locate the ".msi" file, so I cancelled then got the "older version" message. Any ideas?When I tried just installing QT, during the installation I got an error message saying it could not locate the ".msi" file, so I cancelled then got the "older version" message. Any ideas?
download and install the Windows Installer CleanUp utility, then use it to remove any existing QuickTime installation configuration information:
Description of the Windows Installer CleanUp Utility
Next, we’ll make sure we've manually removed all leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
now try another itunes install. does it go through properly this time? -
ORA-12514: ERROR MESSAGE PLZ HELP ME
Hi all,
I'm using Linux Redhat server and Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 version.
I'm trying to connect to remote Oracle database (database2) from my database1 using a dbLink.
I'm using local naming method (TNSNAMES.ORA file): I added in TNSNAMES.ORA this entry in database1 server:
database2 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = database2)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = database2)
----> database2 : the name of my remote machine
then I create my DBLINK with SYS user on database1 :
create PUBLIC DATABASE LINK DB2
connect to USER_CLIENT
identified by RklEoz816959
using 'database2' ;
when trynig to execute a query on database1 using the DBLINK DB2 :
select * from USER_CLIENT.clients@DB2 ;
I have this Error : ORA-12514: TNS:listener does not currently know of service requested in connectdescriptor
Could you help me please :)
Message was edited by:
HAGGARYes;
[oracle@advdb01 bdump]$ tnsping database2 ;
TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 26-NOV-2007 14:03:20
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/10.2.0/advdb_1/network/admin/sqlnet.ora
Used EZCONNECT adapter to resolve the alias
Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=database2))(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.55.71)(PORT=1521)))
OK (0 msec) -
I have been receiving this error trying to install SQL Server 2012. Initially I already had SQL Server 2012 on my machine and attempted to install BIDS 2008. My IT guy stated that there was a conflict in the installation and suggested that I uninstall SQL
Server 2012 and then attempt to install 2008 BIDs again. Fail. I got a similar error as I pasted below. Giving up on having 2008 BIDS I've been trying to reinstall 2012 SQL Server but am getting this message below.
The links provided by this message are no help at all (For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDF039760%25401201%25401)
I've attempted to repair my .NET framework, didn't help.
I've followed the steps in these threads (http://support.microsoft.com/kb/2688946), (https://support.microsoft.com/kb/957310?wa=wsignin1.0) and (https://social.msdn.microsoft.com/Forums/en-US/beeceb19-69cc-4044-94f0-591feec04626/an-error-occurred-during-the-installation-of-assembly-microsoftvc80crt-public-key),
neither one fixed the error.
Any help? Anyone else run into this error? What should I do?
TITLE: Microsoft SQL Server 2012 Setup
The following error has occurred:
An error occurred during the installation of assembly 'Microsoft.VC80.ATL<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8" id="e03584ff-5e55-4073-ac2e-d3e07379c0ae">,</gs>version="8.0.50727.4053"<gs
class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8" id="20b968d8-03a3-4284-bffc-0cc1a90d2aac">,</gs>publicKeyToken="1fc8b3b9a1e18e3b"<gs class="GINGER_SOFTWARE_mark"
ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8" id="9b86ea8f-9852-4110-a616-a1e085d740c6">,</gs>processorArchitecture="x86"<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="2d0ab9fa-7943-473c-b5ee-0a6d6b7194b8"
id="f52b7568-d5e6-4099-a8ee-ebc11fbf4acc">,</gs>type="win32"'. Please refer to Help and Support for more information. HRESULT: 0x80073712.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDF039760%25401201%25401
BUTTONS:
OK
TITLE: Microsoft SQL Server 2012 Setup
The following error has occurred:
SQL Server Setup has encountered an error when running a Windows Installer file.
Windows Installer error message: An error occurred during the installation of assembly 'Microsoft.VC80.ATL<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3" id="297b0922-8852-404d-9dc1-a9b38415a2e5">,</gs>version="8.0.50727.4053"<gs
class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3" id="785a0f51-5ed5-41ee-97a8-8fc31122e2ae">,</gs>publicKeyToken="1fc8b3b9a1e18e3b"<gs class="GINGER_SOFTWARE_mark"
ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3" id="8aa968bd-ff25-4e9d-9109-a219a98ee5e8">,</gs>processorArchitecture="x86"<gs class="GINGER_SOFTWARE_mark" ginger_software_uiphraseguid="6682fddf-3b37-48f0-83c9-ec13036b3ec3"
id="aa9e7ba2-4f5a-4d89-bf64-dcff0714afaa">,</gs>type="win32"'. Please refer to Help and Support for more information. HRESULT: 0x80073712.
Windows Installer file: c:\2f4e5903553a88acc6726f538e140c4d\1033_ENU_LP\x64\setup\sqlsupport_msi\SqlSupport.msi
Windows Installer log file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150213_150637\SqlSupport_Cpu64_1_ComponentUpdate.log
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0xDC80C325
BUTTONS:
&Retry
CancelHi Gurmo,
HRESULT: 0x80073712 means ERROR_SXS_COMPONENT_STORE_CORRUPT, and it is one of the error codes listed at this
KB article.
I suggest you run the System Update Readiness tool and check if the error still persists.
There is a similar thread for your reference.
https://social.technet.microsoft.com/Forums/en-US/0b3d0479-b9c0-4551-a623-1519ce7584af/error-when-installing-sql-server-2008-r2-rtm-on-windows-server-2008-r2-foundation?forum=winservergen
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support -
I purchased the Iphone 4s yesterday. Every time I try to download newest version of Itunes I get a windows installer error message. I went to microsoft and downloaded all I could please help
Another Vista Victory!!! Try uninstalling iTunes, then download and install it again. Make sure Vista is up to date.
-
Installation error message 1603 for itunes 8.0.2.20
Need help. Installation keeps failing. Says that it cannot install. I'm on XP Professional. Removed all Itunes and QuickTime software using MS Uninstaller. I've disabled ant-virus and firewalls. Below is the text from the ItunesSetup.txt in the temp directory
=== Logging started: 2/6/2009 15:06:18 ===
Command Line:
Using single-platform PRODUCTCODE.
Product to install: {F5C63795-2708-4D15-BF18-5ABBFF7DFFC8}
Information on cabinet file 'C:\Documents and Settings\TaranDiya\Desktop\iTunesSetup.exe'
Total length of cabinet file : 68878416
Number of folders in cabinet : 1
Number of files in cabinet : 7
Cabinet set ID : 0
Cabinet number in set : 0
RESERVE area in cabinet? : no
Chained to prev cabinet? : no
Chained to next cabinet? : no
fdintCABINET_INFO
next cabinet =
next disk =
cabinet path = C:\Documents and Settings\TaranDiya\Desktop\
cabinet set ID = 0
cabinet # in set = 0 (zero based)
fdintCOPY_FILE
file name in cabinet = iTunes.msi
uncompressed file size = 37101056
fdintCLOSEFILEINFO
file name in cabinet = iTunes.msi
fdintCOPY_FILE
file name in cabinet = QuickTime.msi
uncompressed file size = 27953664
fdintCLOSEFILEINFO
file name in cabinet = QuickTime.msi
fdintCOPY_FILE
file name in cabinet = AppleSoftwareUpdate.msi
uncompressed file size = 2083840
fdintCLOSEFILEINFO
file name in cabinet = AppleSoftwareUpdate.msi
fdintCOPY_FILE
file name in cabinet = AppleMobileDeviceSupport.msi
uncompressed file size = 13441536
FDICopy() failed: code 4 [Corrupt cabinet]
Executing: "C:\WINDOWS\system32\msiexec.exe" /i "C:\DOCUME~1\TARAND~1\LOCALS~1\Temp\IXP055.TMP\iTunes.msi"
Returning: 1603I am not sure about this particular error number. Looking it up in Windows Installer error messages, it says file in use, restart may be required. But I am not certain that it is a Windows installer error message.
It certainly is worth trying a restart.
I would also clear your temporary Internet files and re-download iTunes.
Also clear your temporary directory as that seems to be where the error occurred.
This article on trouble installing iTunes includes instructions for clearing the temp folder (towards the end of the page) and also other things to try.
http://support.apple.com/kb/HT1926 -
Error message "iTunes Helper Resources not available" and saving to wrong Drive
I am trying to upgrade iTunes to 10.7 on my PC but I keep getting the error message "iTunes Helper Resources not available". Diagnostics take me a support page which talks about not being able to see the device in iTunes - but I can see the device without problems.
I thought I would try reinstalling iTunes from the webpage and it downloaded to my PC fine but when I went to setup, it showed me it is saving to a DVD drive - not my Hard drive. It also won't let me change the location for the file. I have no idea how that's happened as I obviously don't use the DVD drive as a USB (although the PC see's it as one) and I've never chosen it as the location for iTunes in the 7-8 years that I've been using it.
I then thought I'd try uninstalling it and reinstalling it (to the correct drive) but again, it comes up that the DVD drive is invalid and won't uninstall iTunes.
So I'm stuck and haven't been able to find anything helpful on the support pages or in iTunes Help.
Please someone help ...
Thanks.Try the following user tip. (Probably, the section on clearing the installation database might be best given that you've currently got a drive on the problematic letter at the moment.)
"Invalid drive X:\" install errors -
Deskjet 6940 - multiple black cartridge 96 installation error messages
I have a new Deskjet 6940. I installed the black 96 cartridge. Printer keeps saying it is not installed correctly. I cleaned the cartridge, ran the jet/bubble test. Finally I replaced the cartridge, same installation error message. I do not get the error message for the color 97 cartridge. Is this problem common to the 6940? Not sure what my options are. Thanks
have the same problem. We installed cartiridge and did a test page by holding power and cancel buttons at same time. Nothing is showing up for the black cartridge. Maybe cleaning something would help, but I can't find any information on how to access the information using Vista.
-
Windows Installation error message a required ressource can not be located: ms visual c 2005
no idea what to do. please help me!
Am 04.11.2014 21:48, schrieb Jeff A Wright:
>
windows Installation error message a required ressource can not
be located: ms visual c 2005
created by Jeff A Wright
<https://forums.adobe.com/people/JeffAWright> in /Creative Cloud
Download & Install/ - View the full discussion
<https://forums.adobe.com/message/6899407#6899407> -
"general installation error" message each time I try and install Flashplayer 13
I cannot install the latest version of flashplayer. during the installation I keep getting a "general installation error" message.
I have un-installed my old version of flashplayer and followed all the trouble shootong tips but to no avail.
My system is a macintosh, operating with 10.8.5. Any help would be gratefully received......It should be 13.0.0.206.
Download the following:
Flash Player Plug-in (All other browsers) or http://download.macromedia.com/get/flashplayer/current/licensing/win/i nstall_flash_player_13_plugin.msi
Flash Player Uninstaller
Also, download these:
Shockwave Player Uninstaller
Shockwave Player 112 FULL installer (Other browsers)
Save all the files and close your browser.
Run the uninstallers first (both of them)
Go to: C/Windows/System32
Delete the Macromed folder.
Go to: C/Windows/SysWOW64
Delete the Macromed folder.
Open your Registry Editor (Start>Run or press the Windows key + R and type 'regedit' [minus the quotes] and click OK)
In the Registry Editor, go to:
HKEY_LOCAL_MACHINE/SOFTWARE
Delete the Macromedia folder (Right click and choose "Delete").
Go to:
HKEY_CURRENT_USER/Software and delete the Macromedia folder there too.
Close the Registry Editor and empty your recycle bin.
Run the Flash Player installer, and then the Shockwave FULL installer you downloaded. -
my ipod touch 2g is on black screen.when i connect it to my pc it is not recognizing it.then i opened i tunes and put the phone in dfu mode it says an ipod is detected but it cannot be restored error 1600.plz help me...
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software. -
new to lightroom, used program last wk no problem, now unable to import any nef or jpegs, keeps showing error message, need help =(
So where is LR trying to copy the files? Check your destination in the Import panel at the right.
-
Certificate Related Error Message/Please Help
Today I received an "Unable to verify SSL server pop.gmail.com" message on my Mail server. I transfer mail from gmail to Mail.
"Mail was unable to verify the identity of this server, which has a certificate issued to "pop.gmail.com". The error was:
The certificate for this server has expired.
You might be connecting to a computer that is pretending to be "pop.gmail.com", and putting your confidential information at risk. Would you like to continue anyway?"
In the lower box, it lists the Version, Serial Number, Issuer Name (which is from Zaire, Western Cape, and lists the organization as Thawte Consulting cc and other info, Subject name is Google Inc, common name is pop.gmail.com, then gives a Signature Algorithm, Parameters, etc.
It won't let me Copy and Paste so I have not hit the Continue button for concern of losing that info for reference.
I went to Help which instructed me to do the following:
I'm getting a certificate-related error message
If you get an error message with the word "certificate" in it, make a copy of the message and contact your Internet service provider (ISP) or network administrator. The error message may help them diagnose your problem.
If your mail server uses a self-signed Secure Sockets Layer (SSL) certificate, each time you open Mail you'll see an error message stating that the certificate is not valid. You can continue, but you'll see the same message every time you open Mail. To stop seeing this message, you can permanently accept the certificate.
To permanently accept a self-signed SSL certificate:
Click the Show Certificate button in the error message.
The certificate appears with a certificate icon in the upper-left corner.
Hold down the Option key and drag the certificate icon to the desktop.
Double-click the certificate icon on the desktop, and choose X.509 Anchors from the pop-up menu. Click Add.
The certificate is permanently accepted.
You must have permission to administer the computer for this procedure to work.
For information about encryption, click "Tell me more."
Instead of asking for the "580 Anchors" , it asked simply "Do you want to add the certificates from pop.gmail.com.cer to a keychain?"
I clicked "Add"
The pop.gmail.com certificate AND Thawte Freemail Member AND Thawte Personal Freemail certificates is now entered in my Keychain.
There are no dates listed under "Created" or "Modified" for those certs under Keychain.
IS THIS OK OR DO I HAVE A PROBLEM SINCE THESE THAWTE CERTS ARE LOCATED IN ZAIRE???
IF IT IS A PROBLEM, HOW DO I FIX/CHANGE/OK/DELETE/MODIFY, ETC. IT? PLEASE BE CLEAR.
CAN I/SHOULD I JUST DELETE ALL THREE/SOME OF THE CERTS NOW IN KEYCHAIN?
WILL I STILL BE ABLE TO GET MAIL AS BEFORE THIS MESSAGE IF DELETE THE CERTS?
I believe this is the first time I have received a message concerning certificates so I am naive concerning this.
THANK YOU.I had similar gmail/cert problem yesterday - not for the first time!
I deleted the prefs (user/library/preferences), deleted the gmail account (mail prefernces), ran applejack ( http://applejack.sourceforge.net/ ) & added the account from scratch.
Annoying I know, and my inbox was 200+ emails but nobody seems to know what or why this happens (my previous post) http://discussions.apple.com/thread.jspa?threadID=243186&tstart=0
Perhaps this is related to certain emails (an email scam), i run 3 macs & the mail account on the affected machine receives my business email & this is the only machine the gmail/cert problem occurs. -
After downloading the mac os x 10.6.8 I can't open safari. It first told me that I could not run it with Safari 5.1 so I downloaded safari 6 because I had read that that would solve the problem. However I am still getting an error message. HELP!!
I see this on Apple's support page:
Available for: OS X Lion v10.7.5, OS X Lion Server v10.7.5, OS X Mountain Lion v10.8 and v10.8.1
Maybe you are looking for
-
I've just installed Mavericks on my iMac and now my calendar has duplicate and now sometimes tripled events by syncing with my ipad mini regardless of whether the item already existed in the iMac calendar already. How do I remove the duplicates? It w
-
HT5085 I hâve a problem in my phone je veut disimlocker mon iphone
Je veut disimlocker mon iPhone opérateur orange iPhone 4S noir imi 013072000057814
-
I want to be able to control my Apple TV with the Remote App on 2 separate phones. Can this be done? 1 phone has connected and works but the other one requires a code to be inputted into the Apple TV and there is no option on the Apple TV for me to p
-
i have view that when i run a report from a form it create a pdf file in the directory /reports/cache. i ask : 1) how it is possibile to open with web.show_documnet this file (i have try web.show_document('http://nameserver:7777/reports/cache/123456.
-
Deleting Old Versions of iTunes?
I have multiple versions of iTunes on my computer and I'm wondering if I can delete the older ones after installing the new updates. It seems to me that all they are doing is taking up space, but I don't want to delete them if it will cause problems