Quicktime (.mov) von Canon EOS 7D in Premiere CS4

Laut der Adobe-Seite...
http://help.adobe.com/de_DE/PremierePro/4.0/WSd79b3ca3b623cac9-61c6f4fc1246e1c1526-8000.ht ml
...kann Premiere CS4 Quicktime öffnen. Beim Importieren kriege ich aber immer die Meldung "File Format not supported". Wie auf der Seite angegeben habe ich auch den neusten Quicktime-Player installiert - gleiches Resultat.
Die Videos sind in 1080p und stammen von einer Canon EOS 7D.
Finde es irgendwie traurig, dass der Marktführer im Videobereich keine Dateien von dem Marktführer im Kamerabereich öffnen kann.
Gruß, Dave

Und ich find's traurig, dass die Leute immer erwarten, dass alte Versionen einer Software immer die neuesten Kameras unterstützen bzw. die Softwarehersteller immer erahnen sollen, wenn die User mit all den vielen Knöpfen was verschlimmbessert und falsche Einstellungen verwendet haben
a) die 7D ist alles andere als neu.
b) wenn es irgendein Nischenprodukt wäre würde ich Dir Recht geben
c) Quitcktime ist zwar proprietär aber AUCH ein gängiges Format
d) auch 1080p24 ist jetzt kein soooo exotisches Format als das man das nicht unterstützen müsste
e) WENN CS4 Quicktime angeblich unterstützt und - aus welchem Grund auch immer nicht öffnet - sollte es eine Fehlermeldung ausspucken mit der man was anfangen kann ("Codec nicht installiert" oder so). Aber nicht einfach "Kann ich nicht".
Das Programm läuft unter Windows 7/32. Ist die (englische) Version die bei CS5 für 32biit-Systeme beilag) weiß nicht ob es da mehrere gab.
Trotzdem Danke
Gruß, Dave

Similar Messages

  • Wie kann ich die raws von Canon EOS 70D in PSE 12 camera raw öffnen?

    Ich ver suche in Camera Raw RAW-Dateien der Canon eos 70D zu öffnen. Das geht nicht, da das. Nicht unterstützt WIRD. Es Ist Die CR2 Version von Canon. Wie Kann ICH SIE öffnen?
    Gruß
    Manfred

    Use the menu Help / Update. That will update the ACR raw converting module.
    http://forums.adobe.com/thread/1030798?tstart=0

  • RAW Dateien von Canon EOS 350D

    Kann mir jemand sagen "wann" oder vielleicht auch schon "ob" es ein Raw update gibt, damit ich meine Raw-Daten von der EOS 350 öffnen kann?

    Soviel ich weiß wird es ein solches Update erst mit PS CS2, da wieder mit dem ersten Update geben. Für CS1 empfiehlt sich eine Konvertierung ins DNG und das kann dann auch PSCS1 öffnen. Der DNG-Konverter wird sehr oft aktualisiert.

  • Canon XH G1s and Premiere CS4

    I just bought a Canon XH G1s and tried to transfer some footage to Premiere. It would not allow me to view the footage while importing, even though it did import (with some problems on a few of the clips, like saying that one clip had been captured at 110 fps). I am using a new G5 with Premiere CS4, and am hoping that the camera is compatible. I would hate to think I spent $7,000 for a camera that won't work with CS4's Premiere Pro. Yikes! Any help would be appreciated.

    Thats correct no image in the capture screen while capturing.
    You could use HDVSplit instead, which also does scene splitting which Premiere doesn't.

  • Canon vixia HF G10 + premiere CS4 = dropped frames?!

    I bought a canon vixia HF G10. It stores video in chunks of 2GB size .MTS files.
    I put those files in premiere time line sequentially, and found that right before the file boundary, the video jumps forward by 3 frames, and after crossing the boundary, the same frame repeats 3 times. I checked two different boundaries and both have the same problem. This is very upsetting.
    Has anyone seen this before? I don't know if this is a camcorder bug or a premiere bug.
    Is there a free video player or editor I can use to examine the last few frames and the first few frames of .MTS files?
    Premiere CS4 64 bit on windows 7

    The answer I found is that when canon camcorder split the MTS file into 2GB chunks, only the first file has the proper MTS header. The other files do not and are therefore not really MTS files.
    The correct solution is to concatenate all the files back into one MTS file before putting them into premiere. Using windows command prompt copy /B would do the trick. However with later windows version not having command prompt, other binary concatenation utility need to be used. Canon's own software that comes with the camcorder would also work, but I don't like it.

  • Anzeige von Canon EOS 30d RAW-Daten in PS Elements 4.0

    Hallo,
    Photoshop Elements zeigt im Organizer die CR2-Dateien meiner neuen EOS 30d nicht an. Meldung: Die Datei ist beschädigt oder liegt in einem Format vor, daß nicht angezeigt werden kann."
    Camera Raw 3.4 ist ordnungsgemäß installiert.
    Wer hat eine Idee?

    Hallo capo67,
    die Meldung zeigt eigentlich immer eine fehlerhafte Installation an. Wenn die neue Camera Raw.8bi richtig im Verzeichnis File Formats liegt, kann es noch daran liegen, dass die schon im Programm integrierte Camera Raw.8bi vorher nicht gelöscht/verschoben wurde.
    Also einfach noch mal die Datei(en) löschen und das RAW-PlugIn neu installieren. Nach einem Programm-Neustart funktioniert es dann, oder ?
    Grüße
    Matthias
    www.wertvolleswissen.de

  • Photoshop elements 10 kann raw-files von Canon eos 70D nicht öffnen?

    gibt es ein update - und wenn ja - wann?

    Moved to the German forum.
    Here is the page with the compatible versions of Camera Raw. You need 8.2 to open the files from a 70D: http://helpx.adobe.com/de/creative-suite/kb/camera-raw-plug-supported-cameras.html
    but you need at least Photoshop Elements 12 to install it. http://helpx.adobe.com//x-productkb/global/camera-raw-compatible-applications.html (the german version needs an update)
    If you do not intend to update Elements, you should convert the CR2 files to DNG ones that your Camera Raw version can open.

  • Canon EOS 5D Mark3のMOVファイルがPremiere CS4とCS5.5で読み込めません.

    Canon EOS 5D Mark3のMOVファイルがPremiere CS4とCS5.5で読み込めません。
    Vista(32bit)とWindows 7(64Bit)のパソコンで検証していますが同様です。
    同様の動作不具合がある方がいましたらお伝え下さい。
    キャノンに確認しておりますがまだ、不具合の声があがっていないようです。
    EOS 5D Mark 2(1920,1080 Full )とEOS 60D(1280,720)の
    ハイビジョン撮影データは問題なく取り込めます。
    以前のMOVの圧縮技術がIPPから変更になり、
    IPBになったためでしょうか。非常に困っております。
    何度も取り込み後のソフトを立ち上げてもフリーズします。
    「オーディオピークファイルを読込中」でフリーズしてしまいます。

  • Can't render quicktime movies in After Effects and Premiere

    I've just bought and installed Creative Cloud on my new laptop using Windows 8. I installed Quciktime Pro after installing the Adobe programs. Whenever I try to render a project into a Quicktime movie in both After Effects and Premiere then it doesn't work, an error message comes up straight away and the render fails. There is no problem when rendering AVIs.
    My version of Quicktime pro is up to date and have installed the recent updates for the Adobe programs. I'm sure I am doing something wrong but have no idea what it is.
    If anyone could help I would really appreciate it.
    Thanks,
    si

    Try posting in the product forums that you are having this issue with, and be sure to include pertinent details such as the actual errors messages.

  • Import video from canon eos 550d

    What settings should be FCP7 to successfully import .mov from Canon eos 550d?
    I would like video without the noise and recoil.
    Tnx

    550...that's the T2i, right? Downloading the EOS Log and Transfer plugin, and hacking it, is one way:
    http://lfhd.net/2010/04/04/log-and-transfer-for-canon-dslrs/
    Magic Bullet Grinder to convert to ProRes is another:
    http://www.redgiantsoftware.com/products/all/magic-bullet-grinder/
    Or Compressor.
    No matter what, you need to convert the footage to ProRes for editing:
    #51 - Canon 5D MkII / Canon 7D footage into FCP
    Shane's Stock Answer #51 - how do you bring in footage from the Canon 5D and 7D cameras into FCP to edit?
    You need to convert all of the Canon 5D MkII footage from the H.264 format that it records, to ProRes 422 (ProRes HQ is unnecessary...no quality difference) Yes, the file sizes get drastically larger. H.264 is an acquisition and delivery format, not an editing one.
    You can use the Canon EOS Log and Transfer plugin that works with the 1D, 5D and 7D cameras. This plugin is great because it brings in the camera's TIME OF DAY as timecode, instead of starting each clip at 00:00:00:00 like Compressor or other conversion software will do.
    CANON
    Here is a tutorial on how to use it:
    Editblog tutorial

  • Can't capture w/ Firewire in Premiere CS4

    Hello All,
    I am trying to capture video footage from my Canon XL2 camera into Premiere CS4 using Firewire.  I keep getting the message that the 'Capture Device is Offline'.  I went into the camera settings and noticed that AV>DV was turned OFF, so I turned in to ON, but still nothing.  Not sure why I am having these issues when I haven't had them in the past.  Can someone help?
    Thank you,
    Joel Miller

    http://helpx.adobe.com/premiere-pro/kb/cant-capture-dv-hdv-video.html
    -and more about Windows http://forums.adobe.com/message/4708997
    I have NOT used either, but many say to try these for SD capture http://windv.mourek.cz/ or http://www.exsate.com/products/dvcapture/
    I have NOT used it, but many say to try this for HDV capture
    -archived at http://www.videohelp.com/tools/HDVSplit
    -Click the 1st link under "Download sites:" for the latest version

  • Premiere CS4 - How can you import QuickTime (.mov) videos and which settings for the sequence?

    Premiere CS4
    How can you import QuickTime (.mov) videos and which settings for the sequence?
    Please reply in plain English or if possible in German
    Greetings from Vienna, Peter

    I have not installed Quicktime.
    I got a few scenes (.mov) from a Canon Eos 70d.
    I want to create a short film (in Premiere CS4) with these scenes, mixed with photos and MP3 music.

  • I can no longer play quicktime mov files from a canon firestore

    I can no longer play quicktime mov files from a canon firestore from an HDV camera that play on other macs and play in vlc. It happened all of a sudden. Files that I could play before no longer play. It seems to be something wrong with the quicktime codec management because the files do not play in premiere and final cut pro. In FCP it says: File Error: 1 File(s) recognized, 0 access denied, 1 unknown. These files work on other computers. I have four drives and it doesnt matter which file i attempt to open on each drive, these files are unreadable on this system. Please help. Possible issues might be a corrupted index, but i dont understand how that can go across four different drives.
    Model Name:          Mac Pro
      Model Identifier:          MacPro4,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          2.66 GHz
      Number Of Processors:          1
      Total Number Of Cores:          4
      L2 Cache (per core):          256 KB
      L3 Cache:          8 MB
      Memory:          8 GB
      4 SATA drives

    Apple kindly updated Quicktime and rendered Firestore files unplayable. I think a recent update of iTunes was the culprit.
    Solutions: What I did. Wipe the system disc. Re-install Snow Leopard. Re-install FCP7. Don't update Quicktime or iTunes to anything after Jun 2011. QT v7.6.6 is the last good version. That'll get your files back.
    A colleague tried a different approach. For this you need a pre-July 2011 version of the file QuickTimeComponents.component.  It is in the system/library/QuickTime folder. Delete your current one and drop in an old one.
    However if you're working with Final Cut X, I think you screwed until Focus and Apple work something out. My address is on my contacts page at teevideousadotcom if you need any further help.

  • 1080p30 .mov files from canon eos 5DMarkII in Final cut express 4.0.1

    Hi everybody.
    i need some help to import HD vidéo .mov files from Canon Eos 5DMarkII in final cut express.
    The files is in 1080p30 (h264) like avchd but in the final cut configuration i have only 50i and 60i option in HDV and AVCHD
    Final cut necessity to do a render (5h for 15min on my G5) and the movement quality is not the same.
    Anybody have a idea to import Progressive files in final cut ?
    maybe they have an update with new avchd 1080p codec in configuration ?
    or i need final cut pro...?
    Thanks in advance
    and sorry for my english...i'm french

    There is no good solution for working with this camera in FCE. It's 30fps progressive. There is no true video format that is 30fps. This is something Canon was cobbled together for this stills camera.
    You can use MPEG Streamclip to convert the material to QuickTime using the Apple Intermediate Codec at 1920x1080. I think that's what it shoot. You should check the camera manual to confirm it shoots 1920 and not 1440.
    The problem is the frame rate. You can convert it to 29.97fps or to 25fps. 25fps conforms to the European frame rate, but I don't know how well Streamclip will do this conversion. You also need to make sure the material is not interlaced by Streamclip.
    The other problem is that FCE handles 1080 as an interlaced format, because for production it's supposed to be an interlaced format, at least in the formats, HDV and AVCHD, that FCE works with. You can set your sequence properties to have no field dominance, which should prevent it interlacing during compositing of any effects.

  • PREMIERE PRO SLOW & NO RT FOR SOME QUICKTIME MOV

    My premiere pro is very slow when  loading a project of 45.5 GB source files. It takes about four  minutes to load this project of mpeg 2 HDV files which it captured from  my Canon XH A1. The files are located on an eSATA RAID 0 HDD partitioned to 2TB and 1TB respectively and is powered by  Mapower TB 32 Raid controller.
    Secondly my Mercury  Playback Engine is not offering real time playback on some quicktime mov  files. The footage is really choppy when playing back in CS5. These  files have been generated and rendered in after effects using Animation as the  compression type @ 1440 x 1080 25fps. In addition to that I have some stock footage 1920 x 1080 24fps from Actionbacks which have an  alpha channel. These files are not playing back in real time, despite  having the EVGA GTX 285 2GB GPU. Please note that I get a yellow bar but  no RT at all and I can't even render them to get the smooth playback required. Anyone knows qhy is this happening?
    The software is installed on C drive 250GB HDD which is about 70GB free.
    I have got a  Matrox RT X2 card installed with the beta drivers which is also  exhibiting the same problem. But this problem is non Matrox project.
    Is  there anything I can do to improve perfomance and realtime playback  here. I have invested a lot in my current system to the extend that I am  now very disapoointed with the current perfomance.
    Thank you for your assistance.
    System
    PP CS5
    HP XW6600
    Vista biz 64
    EVGA GTX 285 2GB
    Dual Quad Xeon 5450 @ 3Ghz (Total 8 cores)
    24 GB RAM
    3TB ESATA RAID 0
    Matrox RT X2

    I'd throw back to harm's explanation.
    back and forth from 32 - 64, loading up quicktime server etc...
    All I know is, on windows MS AVI, on OSX Quicktime(as if you have a choice)....
    correction; as if I have a choice.

Maybe you are looking for

  • Disk is locked message

    Just started getting this message when I try to open itunes. It was working fine and just started this. We have 4 user accounts that share the folder so when someone buys a song it is available to all users on the computer. This was setup and working

  • Web Dynpro ABAP : Parameter ,start plug and WDDOINIT

    Hi, I'm currently developing a web dynpro abap application which receieves parameters(Work item id). I can read the content of paramaters in the method start plug of the window and I can store them in the context. What I want to do is, in the method

  • Why do we need Interim Storage Type ?

    Why do we need Interim Storage Type ? If you say it's acting as an intermediatary  buffer location... Then why don't we need any Interim Storage for Bin to Bin stock movement?? Any pointers will be appreciated .

  • Not a big Update!

    The Razr > Razr Maxx and Droid 4 is getting an Update It is not Kit Kat it is not a Big update but it is an Update here is the Info by D.L. http://www.droid-life.com/2014/01/14/here-are-the-changelogs-for-the-newest-droid-4-razr-and-razr-maxx-updates

  • "JBO-28300: Piggyback read error" when using Webstart

    Hello, i found a strange problem in my BussinesComponents... The following scenarion we would like to establish: we have running a server component in a OC4J Container on solaris. in the same container we deploy a GUI-Application, via WebStart. every