QuickTime movie in Keynote 3 want to export Keynote as QT

So I have a Keynote presentation. It is mostly images but 3 slides play small Quicktime movies. Interviews I did on DV, converted to 320x240 using Sorenson V3 and IMA 4:1 audio. In Keynote 3.0, they now have controls. They play great.
But I need to export the presentation so others can use it without keynote.
The only option seems to be exporting it as as a Quicktime movie.
Actually, with trial and error, the Quicktimes in the Quicktime play great. BUT are missing controls!
So anyone viewing the interactive Quicktime from a CD-R has no choice but to watch each clip. Longest is 17 minutes so a pause or stop is an option that is needed.
Does anyone know how to get those QT controls (or at least stop or pause) into the movie inside the exported interactive Quicktime from Keynote?
Is there a 3rd party solution? I'm desperate.
Alternatively, if anyone knows how to do same but as a Flash file, that would be fine too.
This was problem in Keynote 2.0 as well. My presentation size is big enough.
Considering the convergence of audio and video all over Apple product line, I just don't get why this was not considered for the 3.0 update. I want to export my lectures for students to self run. I'm probably not the only university professor who shows video and would like Apple to deal with this ASAP.
G4 duo mirror Mac OS X (10.3.9)

If you have Qt Pro, you can open the file and turn on a controller, then resave the file.

Similar Messages

I have 10.0.3, why can I no longer export to vimeo? also, my quicktime movies are not compressed, they export as the whole file.

I have 10.0.3, why can I no longer export to vimeo? also, my quicktime movies are not compressed, they export as the whole file. this didn't happen before the update. do i have to now get compressor? help.

You should buy Compressor it never fails. It is a must have. I have given up using this buggy Share function and use Compressor all the time.

Can't export QuickTime movie correctly! (Only Sound exports!)

(This is my first post xD)
Hey guys, so I made an aanimation in flash CS5 and I tried to export it into a Quicktime Movie. But somehow only the music that I importet into the Animation exported so there's no picture when I open the file.
Any Idea what I could do?

Any number of things could be wrong. Only the content that is on the timeline will be exported to the video. You can only use a limited range of Actionscript in the timeline. Can you give any more specifics about your file?

HT3775 What the maximum time for quicktime video if you want to export it?

What is the maximum time I can record a video clip on iphone 3gs that I want to export to macbook pro?

The duration of the recording would be based on how much free space available.
On the iPhone go to Settings / General / About to see the available memory.

Best Data Rate for Export to DVD as Quicktime Movie

Hello - hope someone out there can help me!!!
I put together a slideshow for my high school reunion using iMovie HD 5.0.2 and need help with settings exporting it as a Quicktime movie.
*I want to export it to a DVD* so that I can play it on a friend's laptop and I'm not sure if iDVD would be the way to go - my friend has a Macbook Pro I can borrow so it might be okay - I am worried about the fact that I've been working on older software. (I have read about opening iDVD and bringing in iMovie project vs. "share to iDVD"). So they suggested instead of iDVD I just export as a quicktime. Then I can burn it in Toast (v.6.0.2)
Wondering about *BEST DATA RATE?*
In export settings I have:
compressor set at H.264
frame rate: current (should that be DV-NTSC?)
key frames: automatic (?)
encoding: best quality/multi-pass
should data rate be automatic?
Some details that might be relevant to helping me:
*Stills brought in as clips with cross-dissolves, only two uses of "Ken Burns effect"
*Some stills were in the project from my LAST reunion - I realize I should have reimported all the stills since I am now recompressing them, but it's too late now!
*no audio
*Slideshow is about 45 mins long, file size says 5.52GB although when I looked into exporting it last night it said 9+GB - not sure why
*Using a G4 Tower (not my ancient laptop) with OS 10.4.11, Dual 533MHz PowerPC, 1.5GB SDRAM
iDVD version is 6.0.4
please help if you can!! thank you in advance...

Are you trying to burn a standard DVD or are you trying to put a QuickTime .mov file on DVD media?
A standard DVD doesn't worry about file size (only the duration).
A "data" DVD is limited to the type of media used. A single layer DVD is about 3.7 GB's.
In order to make a data DVD you need to keep the data rate low enough to not exceed the DVD media playback abilities. They can't handle the higher rates found in many of the preset options.
You can avoid all of these headaches by telling the viewer to "copy" the .mov file from the DVD to their Desktop. Then nearly any of the presets option will work.
H.264 is a great video codec and the "automatic" preset should work just fine. Use "multi-pass" for best quality (takes a very long time). Remove the check mark for "Audio" since your file has none. Leave it checked and you waste file size because a silent audio track would be added.

Black frame in embedded quicktime movies in Keynote when exporting to quicktime movie

I've included some quicktime movies made in Photoshop in my Keynote presentation. When viewing the Keynote presentation from within keynote, the movie play perfectly. However when I export the presentation to a Quicktime move, the first or last frame of the embedded movie is black creating a flicker effect on play.
The quicktime movies have been embedded as loopable animations using the animation build in function 'Start movie' (after transition with 0 delay).
Is there a setting that will prevent the black frame on export or is this a bug?

Trim out the frames in a video editing application, Quicktime, iMovie

Keynote does not export Qucktime embedded movies within slides? Won't play

I Have a Quicktime movie within one of my slides and when I export a Quicktime .mov file, that particular slide does not run the quicktime movie within it, just stays on the first frame?
any ideas where I am going wrong?
Message was edited by: thecount

I think this is a limitation of the export -> quicktime option
Keynote does all sorts of tricks to keep the file sizes small- and one thing really gets butchered are embedded quicktime movies- I have two almost show-stopper frustrations with this:
1- quicktime movies do not loop when exported to quicktime (limitation of sprite track? will look around in live stage pro)
2- all builds and movies must play in entirety before you can click through- this makes being able to skip around very cumbersome especially if using an indexed presentation

Can't Export from FCE to QuickTime Movie w/o recompression

I have problems with choosing the correct settings for export of a FCE video clip to QuickTime Movie. I want the best possible quality (without recompression).
In the manual it says:
"Exporting a Self-Contained Movie Without Recompressing the Media
If you choose to export a self-contained movie, you have the option to not recompress the media in your clip or sequence. If you deselect the Recompress All Frames option and choose Current Settings from the Setting pop-up menu, Final Cut Express simply copies frames from existing media files into the new file with no recompression."
I can't find that option in FCE 4.01 - is it a mistake in the manual? My source media was captured from miniDV tape and the captured media file has the following formate:
Codec: DV/DVCPRO - NTSC, Linear PCM, Timecode
Color profile: SD (6-1-6)
Total bit rate: 29,794
My exported file has this format:
Dimensions: 720 x 480
Codec: Linear PCM, H.264
Color Profile: SD (6-1-6)
Audio Channels: 2
Total bit rate: 2,151
I have seen this question in the FCE archive and people simply say there is no recompression in FCE Export to QT Movie, but clearly there is since I see the H.264 codec listed in my output file and the bit-rate is a about 1/14th the rate of the original source material. The output file size is also much smaller. What gives. How can I get an unrecompressed file out of FCE so I can send it to a coworker for futher editing with his FCE.

dsut56 wrote:
Does anyone else have anything to add to this thread. I'm, sure I'm using Export to QuickTime Movie and not using QuickTime Conversion and from the file specifications I've given above, it is clear that a 14:1 compression took place.
Doug
Double check:
There are only three options in the QuickTime Movie export window.
1. Include: The Audio and Video, Audio Only or Video Only.
2. Markers: Select whateve you want or don't want.
3. The Make Movie Self-Contained selection check box.
Is this what you see?
The export will mirror the Sequence or selected part of the Sequence.
Al

Should I export captured clips as Quicktime movies?

Do I need to export my captured clips as Quicktime movies if I want to import them as source clips in other projects?
I had been importing directly from the capture scratch folder, but this resulted in mono audio tracks, rather than stereo. Everything else looked fine...
This problem has been driving me nuts...perhaps this is the explanation.

I figured it out elsewhere.

Embedded QuickTime movie malfuncioning

I'm using Keynote '08 (vers 4.04) under Tiger.
One of the slides in my Keynote presentation is a short QuickTime clip with audio. Everything works perfectly when I play the Keynote presentation.
However, after adding a narration to the presentation and exporting the presentation as a QuickTime file, the short clip malfunctions. The clip's audio starts, but the movie itself only starts rolling towards the end of the short clip.
Any clues what could be causing this please?
Thanks

Mine is not a true test as I am using Keynote '09 with Mac OS X 10.5.8, but just did a test and the slide that had both a Quicktime movie and a narration did export but the movie did not start until everything that I said in the narration had finished. So when I was trying to talk over the movie, it did not export that way.
One workaround for you would be to record the narration in Keynote and save, then right click the file in the Finder and Show Package Contents (if you don't see this option see below how to find the file) and look for the file called narrationTrack1.m4a and drag it to the desktop.
Then go back to your Keynote file and Export, but uncheck the box that says to include the Recorded Audio. Then add the Quicktime movie to iMovie and then add the audio file to get the narration with it. Then export the whole thing from iMovie.
Definitely not the ideal workaround, but hopefully it will work for you.
If you don't have the option to Show Package Content, follow these steps
Go to the Finder and find your Keynote file and make sure that it has the .key extension on it. If it doesn't, click it and command i to view info and uncheck the box that says Hide Extension.
Delete the .key and change to .zip and then click the use .zip in the dialog box that comes up
Double click the new .zip file and it will change it to a folder
Open the folder and drag out the audio file
Close the folder and add .key to the end of the name and click Add in the dialog box (this will change it back to a Keynote file)

How to burn Quicktime movie to CD

hello- i need help. instructions on how to burn a quicktime movie to a cd. i exported an iphoto slideshow to quicktime so that i can share with family. now, i have a .mov file but don't know how to burn it to cd. do i need quicktime pro to do this? i appreciate any help. thanks

If you just want to burn it to a CD (or do you want this CD to play in a DVD player?) all you have to do is insert a blank CD, Choose to let the Finder handle it, drag and drop the file on the CD then drag and drop the file on the Trash (the Trash icon will change to a burn icon).

Need help converting quicktime movies into Flash files

I need to convert a QT, PhotoJPEG compressed, movie file into a .flv format. I have AE 6.5 Standard and it keeps quitting on exporting a SWV file which would could probably get me by with my client. But, again, it errors out saying something like a JPG is busy, or a file is busy.
I have FlipforMac,a purchased version. But I'm not sure if converting it into a .wmv and then a Flash file is the best route or is even possible.
Any suggestions or ideas of software that I could purchase??
~reicko

i don't think you have read up on the use of flash video
(FLV). there's nothing you need that you do
not already have (except maybe quicktime pro or some other
video editing program). the FLV exporter
comes FREE with flash 8. You should be able to open your
quicktime movie in QT PRO and export to FLV
format - then use any of the flash playback components for
FLV files - best bet is to read the help
docs on this subject and go to the devnet section of
adobe.com where there are several in-depth
articles about implementing flash video into your site.
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
rhian wrote:
> Hi,
> Thanks for your reply. I am using Flash 8. I've been
looking into streaming
> and it's very expensive with quicktime movies, however
I've found a company
> that will stream flash movies much more cheaply which is
why I want to convert
> it to a flash movie.
>
> Sorry are you say that Quicktime Pro allows you convert
files into flash
> formats?
> Rhian
>

Quicktime movies to m2v/aiff files?

I have several quicktime movies that I want to import to DVD Studio Pro. But I have seem to forgotten the process and/or applications to use. Need to make a demo reel.
HELP/thanks...
iMac G5 Mac OS X (10.3.9)
iMac G5 Mac OS X (10.3.9)

Try creating the mpegs then directly in DVD SP... just import a non self contained QuickTime movie made from your sequence in FCP...
Chose file/export/QuickTime Movie. then use "current settings", and check off the "make self contained" option. Import that file directly into DVD SP... use the encoding prefs there to setup your compression to MPEG. It will even render the MPEG in the background while you work in FCP or DVD SP setting up menus etc... It also maintains any chapter markers you've made in FCP.
Jerry

Bringing Quicktime movies or iphoto slideshows into ipod video

Hi, Just got a new 60gb ipod w/ video. Can I bring quicktime movies I have made by exporting slideshows in iphoto into the ipod? When I try, the movies are grayed out and not an option.
Also, is it possible to bring the slideshows from iphoto directly to the ipod without making it into quicktime movie first?
Thanks!

no still got 7.0.1, but i was using isquint to convert
do u know if i will have to pay to upgrade form full version quicktime 7.0.1 to 7.1.3?
Hey thanx
a

No more alpha in exported QuickTime movie from Keynote '09

Hello
In Keynote '08, I create a slide with no background (None).
I add some text with some fancy text IN and OUT features.
I export using the Animation codec and the transparency option.
When I reimport the movie in another Keynote '08 file, it inherits the transparency of the imported file and thus everything is perfectly blended.
In Keynote '09 it is not possible anymore.
Even if I import an exported QuickTime movie from Motion with a transparent background, it is not possible to have a perfect blend, all layers are opaque.
Last but not the least, adding transparent files on top of each other in QuickTime player does not preserve transparency despite the fact that the Animation + transparency features are added in the files.
Thank you in advance.

Hey Gary - first off, thanks for your reply! I am currently forcing spotlight to re-index to see if that might help me out. After that I will try your suggestion and run a system software check.
I need a ProRes export as this is going to be combined with IMAG footage from a live presentation as well as additional video from an Arri Alexa. I want to preserve as much quality as possible so that there isn't a discrepancy in the final edit. Originally, I was rendering a small test to the desktop to gauge output quality of animations etc. I did go ahead and re-export a second time to an external drive, but it doesn't seem to matter as Keynote appears to initially render everything to the startup drive no matter what. The second export still ate about 15 gigs from my startup disk and I am unable to find any sort of temp files anywhere!
I am showing all files in Finder and searching around the ~/private/tmp folders to no avail. In the image below there appears to be a discrepancy in the size being reported by finder and the size I'm seeing listed in terminal...

QuickTime movie in Keynote 3 want to export Keynote as QT

Similar Messages

Maybe you are looking for